{"title":"Heavy Support Vehicles","description":"","products":[{"product_id":"dragon-head-standard-apc-frontplate","title":"Dragon Head : Standard APC Frontplate","description":"Enhance and personalize your standard marine troop carrier with this unique Armored Personnel Carrier (APC) Frontplate. Sold unpainted, this part is meant to replace the corresponding part of the model kit.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395672383808,"sku":"7737006-4CRYSTAL","price":16.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395672416576,"sku":"7737006-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_23750786_13100153_1686938379_1_0_b953f745-abb7-4c8c-9d14-525fe805aa8d.jpg?v=1693503682"},{"product_id":"blank-sicaran-side-hatches","title":"Blank: Sicaran Side Hatches","description":"\u003cp\u003eThese low-profile door plates are designed to slot in and cover over the round doors of a Sicaran Battle Tank, when you have no need for the sponson guns. The kit includes a recess for a magnet on the reverse side, making your model more versatile. Swap out these doors for a pair of sponsons and your ready for your next battle. (Product is sold unpainted.)*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50381148029248,"sku":"20000518-4MR3","price":13.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395665862976,"sku":"7885486-4CRYSTAL","price":19.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395665895744,"sku":"7885486-4ARMOR","price":20.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_24169644_13286735_1686938382_1_0_39b2b6d7-a057-46f6-8009-7729f9222124.jpg?v=1693503132"},{"product_id":"hydra-legion-sicaran-side-hatches","title":"Hydra Legion : Sicaran Side Hatches","description":"\u003cp\u003eThese low-profile door plates are designed to slot in and cover over the round doors of a Sicaran Battle Tank, when you have no need for the sponson guns. The kit includes a recess for a magnet on the reverse side, making your model more versatile. Swap out these doors for a pair of sponsons and your ready for your next battle. (Product is sold unpainted.)*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50410615603520,"sku":"20000653-4MR3","price":15.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395665764672,"sku":"7885485-4CRYSTAL","price":20.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395665797440,"sku":"7885485-4ARMOR","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_24170027_13286928_1686938382_1_0_91aacbef-1f3c-4e3e-9ede-bd361e0d8107.jpg?v=1693503120"},{"product_id":"kings-fist-sicaran-side-hatches","title":"Kings Fist - Sicaran Side Hatches","description":"\u003cp\u003eThese low-profile door plates are designed to slot in and cover over the round doors of a Sicaran Battle Tank, when you have no need for the sponson guns. The kit includes a recess for a magnet on the reverse side, making your model more versatile. Swap out these doors for a pair of sponsons and your ready for your next battle. (Product is sold unpainted.)*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50410617143616,"sku":"20000654-4MR3","price":15.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395665699136,"sku":"7885487-4CRYSTAL","price":20.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395665731904,"sku":"7885487-4ARMOR","price":21.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_24170101_13286986_1686938382_1_0_bf558756-71ef-48d9-b876-0e4f2492e497.jpg?v=1693503110"},{"product_id":"death-team-standard-apc-frontplate","title":"Death Team : Standard APC Frontplate","description":"Enhance and personalize your standard marine troop carrier with this unique Armored Personnel Carrier (APC) Frontplate. Sold unpainted, this part is meant to replace the corresponding part of the model kit.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395658948928,"sku":"7000437-4CRYSTAL","price":16.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395658981696,"sku":"7000437-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_21593102_12169038_1686938354_1_0_7a2137cc-a8ef-4fe4-9db8-7289908e93b9.jpg?v=1693502288"},{"product_id":"angel-tears-standard-apc-frontplate","title":"Angel Tears : Standard APC Frontplate","description":"Enhance and personalize your standard marine troop carrier with this unique Armored Personnel Carrier (APC) Frontplate. Sold unpainted, this part is meant to replace the corresponding part of the model kit.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395658654016,"sku":"M7003837-4CRYSTAL","price":16.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395658686784,"sku":"M7003837-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_21603784_12172977_1686938355_1_0_2251bdd3-750b-4961-9069-d030c05ebb81.jpg?v=1693502254"},{"product_id":"angels-sanguine-standard-apc-frontplate","title":"Angels Sanguine : Standard APC Frontplate","description":"Enhance and personalize your standard marine troop carrier with this unique Armored Personnel Carrier (APC) Frontplate. Sold unpainted, this part is meant to replace the corresponding part of the model kit.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395658555712,"sku":"M7007676-4CRYSTAL","price":16.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395658588480,"sku":"M7007676-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_21615650_12178237_1686938355_1_0_1f6d236d-8956-4b6b-93cd-b9513d5109c3.jpg?v=1693502241"},{"product_id":"winged-sword-standard-apc-frontplate","title":"Winged Sword : Standard APC Frontplate","description":"Enhance and personalize your standard marine troop carrier with this unique Armored Personnel Carrier (APC) Frontplate. Sold unpainted, this part is meant to replace the corresponding part of the model kit.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395658195264,"sku":"7007897-4CRYSTAL","price":16.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395658228032,"sku":"7007897-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_21616392_12178570_1686938355_1_0_f7b4a489-5c96-4873-9131-b83d1489f30a.jpg?v=1693502193"},{"product_id":"winged-death-sword-standard-apc-frontplate","title":"Winged Death Sword : Standard APC Frontplate","description":"Enhance and personalize your standard marine troop carrier with this unique Armored Personnel Carrier (APC) Frontplate. Sold unpainted, this part is meant to replace the corresponding part of the model kit.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395658129728,"sku":"7007953-4CRYSTAL","price":16.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395658162496,"sku":"7007953-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_21616514_12178632_1686938355_1_0_f480e976-d0b8-41ed-949f-9311b8d6cca7.jpg?v=1693502182"},{"product_id":"death-angels-standard-apc-frontplate","title":"Death Angels : Standard APC Frontplate","description":"Enhance and personalize your standard marine troop carrier with this unique Armored Personnel Carrier (APC) Frontplate. Sold unpainted, this part is meant to replace the corresponding part of the model kit.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395658064192,"sku":"7007970-4CRYSTAL","price":16.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395658096960,"sku":"7007970-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_21616645_12178656_1686938355_1_0_ff126126-eca1-4740-92ee-f684dbaf60d4.jpg?v=1693502169"},{"product_id":"skull-banner-standard-apc-frontplate","title":"Skull Banner : Standard APC Frontplate","description":"Enhance and personalize your standard marine troop carrier with this unique Armored Personnel Carrier (APC) Frontplate. Sold unpainted, this part is meant to replace the corresponding part of the model kit.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395657965888,"sku":"7015363-4CRYSTAL","price":16.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395657998656,"sku":"7015363-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_21643084_12188003_1686938356_1_0_e9ae46d5-92ac-4db9-b0d6-cae2b2fad0c5.jpg?v=1693502154"},{"product_id":"ultra-legion-sicaran-side-hatches","title":"Ultra Legion - Sicaran Side Hatches","description":"\u003cp\u003eThese low-profile door plates are designed to slot in and cover over the round doors of a Sicaran Battle Tank, when you have no need for the sponson guns. The kit includes a recess for a magnet on the reverse side, making your model more versatile. Swap out these doors for a pair of sponsons and your ready for your next battle. (Product is sold unpainted.)*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50410605084992,"sku":"20000652-4MR3","price":15.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395645776192,"sku":"7885490-4CRYSTAL","price":20.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395645808960,"sku":"7885490-4ARMOR","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_24170600_13287219_1686938383_1_0_c8995123-457d-44ad-9a76-dffd0c4a221f.jpg?v=1693500926"},{"product_id":"iron-heads-sicaran-side-hatches","title":"Iron Heads - Sicaran Side Hatches","description":"\u003cp\u003eThese low-profile door plates are designed to slot in and cover over the round doors of a Sicaran Battle Tank, when you have no need for the sponson guns. The kit includes a recess for a magnet on the reverse side, making your model more versatile. Swap out these doors for a pair of sponsons and your ready for your next battle. (Product is sold unpainted.)*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50410619830592,"sku":"20000655-4MR3","price":15.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395645710656,"sku":"7885495-4CRYSTAL","price":20.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395645743424,"sku":"7885495-4ARMOR","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_24170806_13287304_1686938383_1_0_f88288cc-fdb3-42cc-b90c-e866917a216e.jpg?v=1693500917"},{"product_id":"phobos-battle-tank-twin-laser-turret-weapon","title":"Phobos\/Rhayus Turret Weapon: Twin Lasers","description":"\u003cp\u003e\u003cstrong\u003eThe Phobos\/Rhayus Turret Weapons\u003c\/strong\u003e are designed to be compatible with our Battle Tank turrets of the same names. Please note that this set does NOT include the base turret; it is an additional weapon option only.\u003c\/p\u003e\n\u003cp\u003eThis weapon uses an 8mm x 2mm disc magnet to secure it to the matching magnet in the turret. This set also includes an ammo\/power source element that attaches to the back of the Phobos Turret to enhance the weapon’s theme. That piece uses three 1mm x 3mm magnets to connect with the three magnets in the back of the turret.\u003c\/p\u003e\n\u003cp\u003eThis part is not needed with a Rhayus Turret, and some customers prefer to simply glue their favorite option in place on the Phobos to avoid using extra tiny magnets.\u003c\/p\u003e\n\u003cp\u003eCombine this set with our other vehicle weapons and upgrade parts to keep your models versatile and effective on the battlefield for years to come.*\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.  \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395636175168,"sku":"7381964-4CRYSTAL","price":26.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395636207936,"sku":"7381964-4ARMOR","price":29.0,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3","offer_id":51599653077312,"sku":"20002446-4MR3","price":13.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_22840717_12698329_1686938366_1_0_67e1607b-05bb-40a0-92d7-3caf03b44c9e.jpg?v=1772838732"},{"product_id":"vegaram-steamruss-rockers","title":"Vegaram SteamRuss Rockers","description":"This custom designed bit is sold unpainted and meant to fit onto the back of a Leman Russ Battle Tank to recreate the mighty Vegaram SteamRuss or add to any tracked vehicle to give it an old-school look.\u003cbr\u003e\n​\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395619725632,"sku":"M8941317-4CRYSTAL","price":16.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395619758400,"sku":"M8941317-4ARMOR","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_26998279_14622978_1686938420_1_0_7024379d-2ac5-42a9-8583-e04653c443af.jpg?v=1693498466"},{"product_id":"vegaram-steamruss-turret-weapon-plasma-cutioner","title":"Vegaram SteamRuss Turret Weapon: Plasma-cutioner","description":"This custom designed turret weapon is sold unpainted and meant to fit onto my SteamRuss Battle Tank Turret. This turret weapon has an insert for a 8mm (Wide) x 2mm (Thick) magnet that matches the same size inset of the SteamRuss Turret to allow for easy and quick weapon changes.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395619660096,"sku":"8410452-4CRYSTAL","price":21.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395619692864,"sku":"8410452-4ARMOR","price":23.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_26998654_14623157_1686938420_1_0_615117a0-4caa-401c-a0e9-3ed1c682247f.jpg?v=1693498454"},{"product_id":"skull-standard-apc-frontplate","title":"Skull : Standard APC Frontplate","description":"Enhance and personalize your standard marine troop carrier with this unique Armored Personnel Carrier (APC) Frontplate. Sold unpainted, this part is meant to replace the corresponding part of the model kit.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395505004864,"sku":"7000350-4CRYSTAL","price":16.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395505037632,"sku":"7000350-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_21592515_12168908_1686938354_1_0_9020c4a4-248c-481b-baf1-c59ab92e687d.jpg?v=1693490077"},{"product_id":"royal-guard-standard-apc-frontplate","title":"Royal Guard : Standard APC Frontplate","description":"Enhance and personalize your standard marine troop carrier with this unique Armored Personnel Carrier (APC) Frontplate. Sold unpainted, this part is meant to replace the corresponding part of the model kit.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395437994304,"sku":"6004046-4CRYSTAL","price":16.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395438027072,"sku":"6004046-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_18542919_10888382_1686938338_1_0_10b5e98a-5b10-4d05-926d-26c99363ab3e.jpg?v=1693484379"},{"product_id":"palace-guard-standard-apc-frontplate","title":"Palace Guard : Standard APC Frontplate","description":"Enhance and personalize your standard marine troop carrier with this unique Armored Personnel Carrier (APC) Frontplate. Sold unpainted, this part is meant to replace the corresponding part of the model kit.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395437863232,"sku":"6004068-4CRYSTAL","price":16.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395437896000,"sku":"6004068-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_18542975_10888409_1686938338_1_0_d0f0af32-71aa-4071-8cfc-26f9f6795c87.jpg?v=1693484365"},{"product_id":"emperors-legion-standard-apc-frontplate","title":"Emperors Legion : Standard APC Frontplate","description":"Enhance and personalize your standard marine troop carrier with this unique Armored Personnel Carrier (APC) Frontplate. Sold unpainted, this part is meant to replace the corresponding part of the model kit.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395437797696,"sku":"6004090-4CRYSTAL","price":16.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395437830464,"sku":"6004090-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_18543078_10888428_1686938338_1_0_cbc161c8-eb84-48f5-b1e5-37243027aa0b.jpg?v=1693484352"},{"product_id":"tornado-vls-hatch-closed","title":"Tornado VLS hatch: Closed","description":"This VLS is designed to fit a standard Rhino chasse. By replacing the back hatches with this piece, you quickly transform your troop carrier into a Whirlwind or an Exorcist. Due to the nature of how this piece  fits you can easily \"Pop\" it in and out as you need it, giving you model more versatility. It can also be a good stand-in or a Chaos Havoc Launcher as well.* \u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395430162752,"sku":"6375011-4CRYSTAL","price":18.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395430195520,"sku":"6375011-4ARMOR","price":19.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_19700130_11404119_1686938343_1_0_5b9ab801-d1ee-42f2-9484-e02f449ad0b9.jpg?v=1693483474"},{"product_id":"tornado-vls-hatch-launch","title":"Tornado VLS hatch: Open","description":"This VLS is designed to fit a standard Rhino chasse. By replacing the back hatches with this piece, you quickly transform your troop carrier into a Whirlwind or an Exorcist. Due to the nature of how this piece  fits you can easily \"Pop\" it in and out as you need it, giving you model more versatility. It can also be a good stand-in or a Chaos Havoc Launcher as well.*   \u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395430097216,"sku":"6375017-4CRYSTAL","price":20.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395430129984,"sku":"6375017-4ARMOR","price":21.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_19700365_11404192_1686938343_1_0_658d12b1-b3a5-4d9e-be46-ed68a00efbe7.jpg?v=1693483459"},{"product_id":"tornado-vls-hatch-combo1","title":"2x Tornado VLS hatch: Combo Set","description":"This VLS is designed to fit a standard Rhino chasse. By replacing the back hatches with this piece, you quickly transform your troop carrier into a Whirlwind or an Exorcist. Due to the nature of how this piece  fits you can easily \"Pop\" it in and out as you need it, giving you model more versatility. It can also be a good stand-in or a Chaos Havoc Launcher as well.*   \u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395429998912,"sku":"6375042-4CRYSTAL","price":30.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395430031680,"sku":"6375042-4ARMOR","price":33.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_19700550_11404259_1686938343_1_0_e421786e-3c9f-42fa-93de-09df141ce7f7.jpg?v=1693483447"},{"product_id":"twin-rapfire-r1-hatch-turrets","title":"R1 : Twin Rapfire Hatch Turret","description":"\u003cp\u003eThe R-Series Hatch Turrets are designed to fit into the hatches of any standard 40k tank or similarly sized vehicle access point. However, they are slightly wider than the openings on most 30k vehicles and require you to enlarge the opening with a hobby knife for a proper fit. (Our D-Series Pintle Turrets are a better choice for 30k vehicles.)\u003c\/p\u003e\n\u003cp\u003eThis product is a much easier alternative to traditional pintle-mounted weapons, allowing you to quickly and easily replace a vehicle’s weapon loadout by simply “popping” them in and out as needed. No glue is required—each turret is designed to sit securely in place without falling out, and can even swivel to face your enemies. This gives your models greater versatility and allows you to use these turrets with any of your vehicles.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3 \/ 1 Turret","offer_id":50456714182976,"sku":"20000811-4MR3","price":10.0,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3 \/ 2 Turrets","offer_id":50456714215744,"sku":"20000812-4MR3","price":15.5,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3 \/ 4 Turrets","offer_id":50456714248512,"sku":"20000813-4MR3","price":21.0,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 1 Turret","offer_id":49395426656576,"sku":"6933615-4CRYSTAL","price":16.75,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 2 Turrets","offer_id":49395426722112,"sku":"9525831-4CRYSTAL","price":22.75,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 4 Turrets","offer_id":49395426689344,"sku":"6914661-4CRYSTAL","price":34.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 1 Turret","offer_id":49395426754880,"sku":"6933615-4ARMOR","price":17.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 2 Turrets","offer_id":49395426787648,"sku":"9525831-4ARMOR","price":24.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 4 Turrets","offer_id":49395426820416,"sku":"6914661-4ARMOR","price":39.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_28494525_12057419_1686938350_1_0.jpg?v=1693483070"},{"product_id":"flamefire-r1-hatch-turrets","title":"R1: Flamebolt Hatch Turrets","description":"\u003cp\u003eThe R-Series Hatch Turrets are designed to fit into the hatches of any standard 40k tank or similarly sized vehicle access point. However, they are slightly wider than the openings on most 30k vehicles and require you to enlarge the opening with a hobby knife for a proper fit. (Our D-Series Pintle Turrets are a better choice for 30k vehicles.)\u003c\/p\u003e\n\u003cp\u003eThis product is a much easier alternative to traditional pintle-mounted weapons, allowing you to quickly and easily replace a vehicle’s weapon loadout by simply “popping” them in and out as needed. No glue is required—each turret is designed to sit securely in place without falling out, and can even swivel to face your enemies. This gives your models greater versatility and allows you to use these turrets with any of your vehicles.*  \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3 \/ 1 Turret","offer_id":50456561221952,"sku":"20000802-4MR3","price":10.0,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3 \/ 2 Turrets","offer_id":50456561254720,"sku":"20000803-4MR3","price":15.5,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3 \/ 4 Turrets","offer_id":50456561287488,"sku":"20000804-4MR","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 1 Turret","offer_id":49395426427200,"sku":"9525836-4CRYSTAL","price":16.75,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 2 Turrets","offer_id":49395426492736,"sku":"9525828-4CRYSTAL","price":23.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 4 Turrets","offer_id":49395426459968,"sku":"6914807-4CRYSTAL","price":37.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 1 Turret","offer_id":49395426525504,"sku":"9525836-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 2 Turrets","offer_id":49395426558272,"sku":"9525828-4ARMOR","price":25.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 4 Turrets","offer_id":49395426591040,"sku":"6914807-4ARMOR","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_28495259_12057630_1686938350_1_0.jpg?v=1693483042"},{"product_id":"meltafire-r1-hatch-turrets","title":"R1 : Thermobolt Hatch Turrets","description":"\u003cp\u003eThe R-Series Hatch Turrets are designed to fit into the hatches of any standard 40k tank or similarly sized vehicle access point. However, they are slightly wider than the openings on most 30k vehicles and require you to enlarge the opening with a hobby knife for a proper fit. (Our D-Series Pintle Turrets are a better choice for 30k vehicles.)\u003c\/p\u003e\n\u003cp\u003eThis product is a much easier alternative to traditional pintle-mounted weapons, allowing you to quickly and easily replace a vehicle’s weapon loadout by simply “popping” them in and out as needed. No glue is required—each turret is designed to sit securely in place without falling out, and can even swivel to face your enemies. This gives your models greater versatility and allows you to use these turrets with any of your vehicles.*  \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3 \/ 1 Turret","offer_id":50456694522176,"sku":"20000808-4MR3","price":10.0,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3 \/ 2 Turrets","offer_id":50456694554944,"sku":"20000809-4MR3","price":15.5,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3 \/ 4 Turrets","offer_id":50456694587712,"sku":"20000810-4MR3","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 1 Turret","offer_id":49395426197824,"sku":"9525835-4CRYSTAL","price":17.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 2 Turrets","offer_id":49395426263360,"sku":"9525827-4CRYSTAL","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 4 Turrets","offer_id":49395426230592,"sku":"6914861-4CRYSTAL","price":38.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 1 Turret","offer_id":49395426296128,"sku":"9525835-4ARMOR","price":18.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 2 Turrets","offer_id":49395426328896,"sku":"9525827-4ARMOR","price":26.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 4 Turrets","offer_id":49395426361664,"sku":"6914861-4ARMOR","price":44.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_28495170_12057740_1686938350_1_0.jpg?v=1693483016"},{"product_id":"plasfire-r1-hatch-turrets","title":"R1 : Plasbolt Hatch Turrets","description":"\u003cp\u003eThe R-Series Hatch Turrets are designed to fit into the hatches of any standard 40k tank or similarly sized vehicle access point. However, they are slightly wider than the openings on most 30k vehicles and require you to enlarge the opening with a hobby knife for a proper fit. (Our D-Series Pintle Turrets are a better choice for 30k vehicles.)\u003c\/p\u003e\n\u003cp\u003eThis product is a much easier alternative to traditional pintle-mounted weapons, allowing you to quickly and easily replace a vehicle’s weapon loadout by simply “popping” them in and out as needed. No glue is required—each turret is designed to sit securely in place without falling out, and can even swivel to face your enemies. This gives your models greater versatility and allows you to use these turrets with any of your vehicles.*  \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3 \/ 1 Turret","offer_id":50456681742656,"sku":"20000805-4MR3","price":10.0,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3 \/ 2 Turrets","offer_id":50456681775424,"sku":"20000806-4MR3","price":15.5,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3 \/ 4 Turrets","offer_id":50456681808192,"sku":"20000807-4MR3","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 1 Turret","offer_id":49395426001216,"sku":"9525832-4CRYSTAL","price":16.75,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 2 Turrets","offer_id":49395426033984,"sku":"9525826-4CRYSTAL","price":23.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 4 Turrets","offer_id":49395426066752,"sku":"6914891-4CRYSTAL","price":37.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 1 Turret","offer_id":49395426099520,"sku":"9525832-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 2 Turrets","offer_id":49395426132288,"sku":"9525826-4ARMOR","price":25.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 4 Turrets","offer_id":49395426165056,"sku":"6914891-4ARMOR","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_28495030_12057762_1686938350_1_0.jpg?v=1693482991"},{"product_id":"blank-mark-1-apc-frontplate","title":"Blank : Mark-1 APC Frontplate","description":"Enhance and personalize your standard marine troop carrier with this unique Armored Personnel Carrier (APC) Frontplate. Sold unpainted, this part is meant to replace the corresponding part of the model kit.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395422658880,"sku":"6992402-4CRYSTAL","price":16.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395422691648,"sku":"6992402-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_21567972_12158623_1686938353_1_0_d5e96469-1926-4cbe-a5aa-564c13b9e08b.jpg?v=1693482650"},{"product_id":"blank-banner-standard-apc-frontplate","title":"Blank Banner : Standard APC Frontplate","description":"Enhance and personalize your standard marine troop carrier with this unique Armored Personnel Carrier (APC) Frontplate. Sold unpainted, this part is meant to replace the corresponding part of the model kit.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395422560576,"sku":"6992464-4CRYSTAL","price":16.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395422593344,"sku":"6992464-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_21568030_12158642_1686938353_1_0_eb9729a0-f2c4-4625-ba06-f4d1b46e2d00.jpg?v=1693482636"},{"product_id":"maltese-cross-standard-apc-frontplate","title":"Maltese Cross : Standard APC Frontplate","description":"\u003cp\u003eEnhance and personalize your standard marine troop carrier with this unique Armored Personnel Carrier (APC) Frontplate. Sold unpainted, this part is meant to replace the corresponding part of the model kit.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003e\u003cstrong\u003eA Digital File\u003c\/strong\u003e\u003c\/span\u003e can be selected as a choice under the Materials Options dropdown. If you have your own 3D printer and the tools needed to prepare and support them, this can be a great option. Please be aware these files are unsupported and in a STL file format, which is native to most any stereolithography\/CAD software. \u003cstrong\u003eBy purchasing these digital files, you are agreeing to all of the terms and conditions listed below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLEGAL DISCLAIMER for STL PURCHASE: \u003c\/strong\u003eThe rights granted to you through the purchase of our digital assets are for non-commercial\/ PERSONAL USE ONLY. Any reproductions of these files not for your own use is prohibited. You may not lawfully copy, trade and\/or resell these digital files or resell any printed reproductions of them in any way. The STL files may not be modified or altered to bypass these rights.\u003c\/p\u003e\n\u003cp\u003eFurthermore, we are not responsible for any misprints or offer technical support to assist with your printing process. These are the same elements of the files we use for our own production process, so if we discover a defect or issue with the file itself, we will fix the file and an updated file will be sent to you automatically.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":51890380931392,"sku":"20002581-4MR3","price":13.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395422495040,"sku":"6992513-4CRYSTAL","price":16.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395422527808,"sku":"6992513-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true},{"title":"Digital File (Personal Use Only)","offer_id":51890380964160,"sku":"PGTM-FP3-MalteseCross1.stl","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_21568177_12158706_1686938353_1_0_9a82e4a2-faec-4e76-92c4-d9952c633360.jpg?v=1693482622"},{"product_id":"maltese-cross-mark-1-apc-frontplate","title":"Maltese Cross : Mark-1 APC Frontplate","description":"\u003cp\u003eEnhance and personalize your standard marine troop carrier with this unique Armored Personnel Carrier (APC) Frontplate. Sold unpainted, this part is meant to replace the corresponding part of the model kit.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003e\u003cstrong\u003eA Digital File\u003c\/strong\u003e\u003c\/span\u003e can be selected as a choice under the Materials Options dropdown. If you have your own 3D printer and the tools needed to prepare and support them, this can be a great option. Please be aware these files are unsupported and in a STL file format, which is native to most any stereolithography\/CAD software. \u003cstrong\u003eBy purchasing these digital files, you are agreeing to all of the terms and conditions listed below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLEGAL DISCLAIMER for STL PURCHASE:\u003c\/strong\u003e The rights granted to you through the purchase of our digital assets are for non-commercial\/ PERSONAL USE ONLY. Any reproductions of these files not for your own use is prohibited. You may not lawfully copy, trade and\/or resell these digital files or resell any printed reproductions of them in any way. The STL files may not be modified or altered to bypass these rights.\u003c\/p\u003e\n\u003cp\u003eFurthermore, we are not responsible for any misprints or offer technical support to assist with your printing process. These are the same elements of the files we use for our own production process, so if we discover a defect or issue with the file itself, we will fix the file and an updated file will be sent to you automatically.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":51890347999552,"sku":"20002580-4MR3","price":13.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395422232896,"sku":"6996388-4CRYSTAL","price":16.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395422265664,"sku":"6996388-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true},{"title":"Digital File (Personal Use Only)","offer_id":51890377851200,"sku":"PGTM-FP1_MalteseCross.stl","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_21580797_12163702_1686938353_1_0_66be8722-715e-469f-93e1-2865d11f4719.jpg?v=1693482572"},{"product_id":"shaggy-wolf-standard-apc-frontplate","title":"Shaggy Wolf : Standard APC Frontplate","description":"Enhance and personalize your standard marine troop carrier with this unique Armored Personnel Carrier (APC) Frontplate. Sold unpainted, this part is meant to replace the corresponding part of the model kit.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395413123392,"sku":"4893092-4CRYSTAL","price":16.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395413156160,"sku":"4893092-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_14940979_8947480_1686938322_1_0_5aa28642-c281-46af-a3fb-95fa6ce1b2ba.jpg?v=1693481548"},{"product_id":"spike-front-mark-1-apc-frontplate","title":"Spike Front: Mark-1 APC Frontplate","description":"Enhance and personalize your standard marine troop carrier with this unique Armored Personnel Carrier (APC) Frontplate. Sold unpainted, this part is meant to replace the corresponding part of the model kit.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395412762944,"sku":"4929517-4CRYSTAL","price":16.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395412795712,"sku":"4929517-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_15075675_8993285_1686938322_1_0_a1950dc2-f01d-4314-93b9-fe0ed54b0099.jpg?v=1693481496"},{"product_id":"hydra-legion-mark-1-apc-frontplate","title":"Hydra Legion: Mark-1 APC Frontplate","description":"Enhance and personalize your standard marine troop carrier with this unique Armored Personnel Carrier (APC) Frontplate. Sold unpainted, this part is meant to replace the corresponding part of the model kit.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395412664640,"sku":"4929629-4CRYSTAL","price":16.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395412697408,"sku":"4929629-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_15075852_8993406_1686938322_1_0_e275257b-af45-4169-b79e-3e9234bab154.jpg?v=1693481482"},{"product_id":"hydra-legion-standard-apc-frontplate","title":"Hydra Legion: Standard APC Frontplate","description":"\u003cp\u003eEnhance and personalize your standard marine troop carrier with this unique Armored Personnel Carrier (APC) Frontplate. Sold unpainted, this part is meant to replace the corresponding part of the model kit.*\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003e\u003cstrong\u003eA Digital File\u003c\/strong\u003e\u003c\/span\u003e can be selected as a choice under the Materials Options dropdown. If you have your own 3D printer and the tools needed to prepare and support them, this can be a great option. Please be aware these files are unsupported and in a STL file format, which is native to most any stereolithography\/CAD software. \u003cstrong\u003eBy purchasing these digital files, you are agreeing to all of the terms and conditions listed below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLEGAL DISCLAIMER for STL PURCHASE:\u003c\/strong\u003e The rights granted to you through the purchase of our digital assets are for non-commercial\/ PERSONAL USE ONLY. Any reproductions of these files not for your own use is prohibited. You may not lawfully copy, trade and\/or resell these digital files or resell any printed reproductions of them in any way. The STL files may not be modified or altered to bypass these rights.\u003c\/p\u003e\n\u003cp\u003eFurthermore, we are not responsible for any misprints or offer technical support to assist with your printing process. These are the same elements of the files we use for our own production process, so if we discover a defect or issue with the file itself, we will fix the file and an updated file will be sent to you automatically.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395412566336,"sku":"4929663-4CRYSTAL","price":16.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395412599104,"sku":"4929663-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3","offer_id":51925596143936,"sku":"20002611-4MR3","price":13.5,"currency_code":"USD","in_stock":true},{"title":"Digital File (Personal Use Only)","offer_id":51925626782016,"sku":"PGTM-RFS-HydraLegion.stl","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-TTF-M2a-AlphaHydra.png?v=1777583238"},{"product_id":"scarab-legion-mark-1-apc-frontplate","title":"Scarab Sons : Mark-1 APC Frontplate","description":"Enhance and personalize your standard marine troop carrier with this unique Armored Personnel Carrier (APC) Frontplate. Sold unpainted, this part is meant to replace the corresponding part of the model kit.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395392446784,"sku":"5199189-4CRYSTAL","price":16.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395392479552,"sku":"5199189-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_15968591_9349279_1686938329_1_0_76dd7f41-a9f5-44ed-878b-fd21009ea05b.jpg?v=1693468474"},{"product_id":"sinful-spikes-chains-standard-apc-frontplate","title":"Sinful Spikes \u0026 Chains : Standard APC Frontplate","description":"\u003cem\u003eThis kit comes with extra spikes to add to your model.\u003c\/em\u003e\u003cbr\u003e\n\u003cbr\u003e\nEnhance and personalize your standard marine troop carrier with this unique Armored Personnel Carrier (APC) Frontplate. Sold unpainted, this part is meant to replace the corresponding part of the model kit.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395366527296,"sku":"9552099-4CRYSTAL","price":16.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395366560064,"sku":"9552099-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_28569586_15381201_1686938436_1_0_3618b516-7127-44cf-93a5-973599f7cca3.jpg?v=1695321388"},{"product_id":"kracken-standard-apc-frontplate","title":"Kracken : Standard APC Frontplate","description":"Enhance and personalize your standard marine troop carrier with this unique Armored Personnel Carrier (APC) Frontplate. Sold unpainted, this part is meant to replace the corresponding part of the model kit.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395362038080,"sku":"9777437-4CRYSTAL","price":16.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395362070848,"sku":"9777437-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_29190809_15664579_1686938440_1_0_22c5f403-6e52-43d4-8be6-dfc6d2bd57a1.jpg?v=1693466794"},{"product_id":"4x-base-r1-closed-hatchs","title":"R1 : Closed Hatch 4 Pack","description":"\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eThe R-Series Closed Hatch Insert (and Pintle Turrets) is designed to fit into the hatches of any standard 40k tank or similarly sized vehicle access point. However, they are slightly wider than the openings on most 30k vehicles and require you to enlarge the opening with a hobby knife for a proper fit. (Our D-Series Pintle Turrets are a better choice for 30k vehicles.)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eThis product is a much easier alternative to traditional pintle-mounted weapons, allowing you to quickly and easily replace a vehicle’s weapon loadout by simply “popping” them in and out as needed. No glue is required—each hatch is designed to sit securely in place without falling out. This gives your models greater versatility and allows you to use these hatches with any of your vehicles.*\u003cbr\u003e\u003c\/span\u003e  \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395328483648,"sku":"10318653-4CRYSTAL","price":22.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395328516416,"sku":"10318653-4ARMOR","price":24.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_30800628_16396507_1686938457_1_0_0b392908-3680-439a-ba6c-5c682a888537.jpg?v=1756216649"},{"product_id":"helios-rider-missle-tracking-sensor-array","title":"Helios Missle Tracking Array","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eThe Helios Missle Tracking Array\u003c\/strong\u003e is designed to fit into the  front heavy bolter turret hole of a standard \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eLand Raider kit.\u003c\/span\u003e Quickly turn your standard raider into a  heavily armored artilary vehicle by simply . This product gives you model more versatility.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003eA Digital File can be selected as a choice under the Materials Options dropdown. If you have your own 3D printer and the tools needed to prepare and support them, this can be a great option. Please be aware these files are unsupported and in a STL file format, which is native to most any stereolithography\/CAD software. \u003cstrong\u003eBy purchasing these digital files, you are agreeing to all of the terms and conditions listed below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLEGAL DISCLAIMER for STL PURCHASE: \u003c\/strong\u003eThe rights granted to you through the purchase of our digital assets are for non-commercial\/ PERSONAL USE ONLY. Any reproductions of these files not for your own use is prohibited. You may not lawfully copy, trade and\/or resell these digital files or resell any printed reproductions of them in any way. The STL files may not be modified or altered to bypass these rights.\u003c\/p\u003e\n\u003cp\u003eFurthermore, we are not responsible for any misprints or offer technical support to assist with your printing process. These are the same elements of the files we use for our own production process, so if we discover a defect or issue with the file itself, we will fix the file and an updated file will be sent to you automatically.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3 \/ Just 1","offer_id":50311064387904,"sku":"20000302-4MR3","price":16.5,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3 \/ 2 Sensors","offer_id":50311064420672,"sku":"20000303-4MR","price":22.5,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3 \/ 3 Sensors","offer_id":50311064453440,"sku":"20000304-4MR","price":27.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ Just 1","offer_id":49395254362432,"sku":"10666824-4CRYSTAL","price":23.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 2 Sensors","offer_id":49395254395200,"sku":"10666823-4CRYSTAL","price":36.25,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 3 Sensors","offer_id":49395254460736,"sku":"10668311-4CRYSTAL","price":49.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Just 1","offer_id":49395254493504,"sku":"10666824-4ARMOR","price":25.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 2 Sensors","offer_id":49395254526272,"sku":"10666823-4ARMOR","price":41.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 3 Sensors","offer_id":49395254559040,"sku":"10668311-4ARMOR","price":58.0,"currency_code":"USD","in_stock":true},{"title":"Digital File (Personal Use Only) \/ Just 1","offer_id":50311092011328,"sku":"Helios-MissileTrackingArray.stl","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_31845122_16858879_1686938492_1_0_9419c9e8-f29e-4112-abfb-8e9f3c2ebd26.jpg?v=1693457188"},{"product_id":"silverbacks-standard-apc-frontplate","title":"Silverbacks : Standard APC Frontplate","description":"Enhance and personalize your standard marine troop carrier with this unique Armored Personnel Carrier (APC) Frontplate. Sold unpainted, this part is meant to replace the corresponding part of the model kit.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395246858560,"sku":"M10759476-4CRYSTAL","price":16.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395246891328,"sku":"M10759476-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_32090470_16988125_1686938498_1_0_0c09189c-7387-41c5-a386-2461a9065c30.jpg?v=1693455926"},{"product_id":"kings-fist-impulsor-front-plate-1","title":"Kings Fist : Impala Front Plate 1","description":"\u003cp\u003eThis \u003cstrong\u003eImpala Front Plate\u003c\/strong\u003e can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its faction. The part is unpainted, but it includes raised emblems and details that make painting simple, ensuring a consistent and uniform appearance for your entire army.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50630135349568,"sku":"20001162-4MR3","price":17.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395133284672,"sku":"11574448-4CRYSTAL","price":26.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395133317440,"sku":"11574448-4ARMOR","price":31.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_34471559_18117422_1686938548_1_0_341ee0f1-f786-4501-95e8-2d08f5fd2b22.jpg?v=1693447597"},{"product_id":"kings-fist-impulsor-branding-kit-1","title":"Kings Fist: Impala Branding Kit 1","description":"\u003cp\u003e\u003cstrong\u003eThe Impala Branding Kits\u003c\/strong\u003e are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your faction. This front plate replaces the corresponding part of the Impulsor kit, while the themed vehicle emblems fit neatly into the open areas behind the side sponsons on both sides of the vehicle. Although these parts come unpainted, they feature raised emblems and details that facilitate easy painting, ensuring a consistent and uniform look for your entire army.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50630124863808,"sku":"20001161-4MR3","price":20.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395133219136,"sku":"11581037-4CRYSTAL","price":30.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395133251904,"sku":"11581037-4ARMOR","price":40.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_34471581_18117463_1686938548_1_0_fde4513c-b072-42be-8121-dec427d8a3d9.jpg?v=1693447585"},{"product_id":"shaggy-wolf-impulsor-branding-kit-1","title":"Shaggy Wolf: Impala Branding Kit 1","description":"\u003cp\u003e\u003cstrong\u003eThe Impala Branding Kits\u003c\/strong\u003e are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your faction. This front plate replaces the corresponding part of the Impulsor kit, while the themed vehicle emblems fit neatly into the open areas behind the side sponsons on both sides of the vehicle. Although these parts come unpainted, they feature raised emblems and details that facilitate easy painting, ensuring a consistent and uniform look for your entire army.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50628174545216,"sku":"20001151-4MR4","price":20.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395133120832,"sku":"11581039-4CRYSTAL","price":29.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395133153600,"sku":"11581039-4ARMOR","price":39.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_34475038_18118754_1686938548_1_0_8dfcc154-4472-4d7e-8785-038cda4a8cbe.jpg?v=1693447576"},{"product_id":"ultra-legion-impulsor-branding-kit-1","title":"Ultra Legion: Impala Branding Kit 1","description":"\u003cp\u003e\u003cstrong\u003eThe Impala Branding Kits\u003c\/strong\u003e are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your faction. This front plate replaces the corresponding part of the Impulsor kit, while the themed vehicle emblems fit neatly into the open areas behind the side sponsons on both sides of the vehicle. Although these parts come unpainted, they feature raised emblems and details that facilitate easy painting, ensuring a consistent and uniform look for your entire army.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50628274487616,"sku":"20001155-4MR3","price":20.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395132727616,"sku":"11581040-4CRYSTAL","price":30.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395132760384,"sku":"11581040-4ARMOR","price":40.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_34475131_18118856_1686938548_1_0_466c6e3f-412f-4af1-9568-ddf6a1f2d5e9.jpg?v=1693447564"},{"product_id":"winged-sword-impulsor-branding-kit-1","title":"Winged Sword : Impala Branding Kit 1","description":"\u003cp\u003e\u003cstrong\u003eThe Impala Branding Kits\u003c\/strong\u003e are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your faction. This front plate replaces the corresponding part of the Impulsor kit, while the themed vehicle emblems fit neatly into the open areas behind the side sponsons on both sides of the vehicle. Although these parts come unpainted, they feature raised emblems and details that facilitate easy painting, ensuring a consistent and uniform look for your entire army. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"TufFlex MJP","offer_id":49395132662080,"sku":"11581042-4ARMOR","price":40.5,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3","offer_id":50037297414464,"sku":"11581042-4MR3","price":20.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_34475148_18118861_1686938548_1_0_556c38f6-1691-49bb-b2ce-91970bfd3e22.jpg?v=1693447551"},{"product_id":"angel-tears-impulsor-branding-kit-1","title":"Angel Tears : Impala Branding Kit 1","description":"\u003cp\u003e\u003cstrong\u003eThe Impala Branding Kits\u003c\/strong\u003e are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your faction. This front plate replaces the corresponding part of the Impulsor kit, while the themed vehicle emblems fit neatly into the open areas behind the side sponsons on both sides of the vehicle. Although these parts come unpainted, they feature raised emblems and details that facilitate easy painting, ensuring a consistent and uniform look for your entire army.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50630054641984,"sku":"20001159-4MR3","price":20.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395132563776,"sku":"11581043-4CRYSTAL","price":30.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395132596544,"sku":"11581043-4ARMOR","price":40.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_34475162_18118867_1686938548_1_0_830bcf42-9607-4604-b26d-5c8779220d45.jpg?v=1693447540"},{"product_id":"maltese-cross-impulsor-branding-kit-1","title":"Maltese Cross : Impala Branding Kit 1","description":"\u003cp\u003e\u003cstrong\u003eThe Impala Branding Kits\u003c\/strong\u003e are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your faction. This front plate replaces the corresponding part of the Impulsor kit, while the themed vehicle emblems fit neatly into the open areas behind the side sponsons on both sides of the vehicle. Although these parts come unpainted, they feature raised emblems and details that facilitate easy painting, ensuring a consistent and uniform look for your entire army.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50629978390848,"sku":"20001157-4MR3","price":20.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395132498240,"sku":"11581044-4CRYSTAL","price":30.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395132531008,"sku":"11581044-4ARMOR","price":40.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_34475185_18118880_1686938548_1_0_bc30038a-bd78-4a19-a271-6ceb40bf22ea.jpg?v=1693447528"},{"product_id":"maltese-cross-impulsor-front-plate-1","title":"Maltese Cross : Impala Front Plate 1","description":"\u003cp\u003eThis \u003cstrong\u003eImpala Front Plate\u003c\/strong\u003e can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its faction. The part is unpainted, but it includes raised emblems and details that make painting simple, ensuring a consistent and uniform appearance for your entire army.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50629989171520,"sku":"20001158-4MR3","price":17.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395132432704,"sku":"11581048-4CRYSTAL","price":26.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395132465472,"sku":"11581048-4ARMOR","price":31.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_34475196_18118885_1686938548_1_0_7ecd426e-6e0d-402c-b14e-03d6a5a89228.jpg?v=1693447515"},{"product_id":"angel-tears-impulsor-front-plate-1","title":"Angel Tears : Impala Front Plate 1","description":"\u003cp\u003eThis\u003cstrong\u003e Impala Front Plate\u003c\/strong\u003e can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its faction. The part is unpainted, but it includes raised emblems and details that make painting simple, ensuring a consistent and uniform appearance for your entire army.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50630059327808,"sku":"20001160-4MR3","price":17.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395132367168,"sku":"11581045-4CRYSTAL","price":26.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395132399936,"sku":"11581045-4ARMOR","price":31.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_34475211_18118891_1686938548_1_0_4889494f-c5e2-4176-a3d8-1e1c42fe07bb.jpg?v=1693447504"}],"url":"https:\/\/popgoesthemonkey.com\/collections\/heavy-support-vehicles\/parts_vehicles.oembed","provider":"Pop Goes the Monkey","version":"1.0","type":"link"}