{"title":"Chaos Marine Armory","description":"","products":[{"product_id":"5x-square-spiked-t-5a-yaren-plate-shoulder-sets","title":"5x Square Spiked - 1st Ed. Heavy Plate Cataphractii Sets","description":"\u003cp\u003eThe 1st Edition Cataphractii Shoulder Sets were created for use with the initial plastic Cataphractii-pattern Terminator kits. These original kits had both the left and right shoulder pads as two pieces; our custom sets made both shoulders a single piece, simplifying assembly. Each pauldron features custom emblems and details for easier painting and a uniform army appearance. With minor modifications, they can also fit other Terminator and Gravis armor units, like Aggressors.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395679887680,"sku":"7572452-4CRYSTAL","price":21.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395679920448,"sku":"7572452-4ARMOR","price":22.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_23298888_12892549_1686938374_1_0_ce26a554-909f-4bc5-b294-e3e30977b984.jpg?v=1695936912"},{"product_id":"5x-studded-t-5a-yaren-plate-shoulder-sets","title":"5x Studded - 1st Ed. Heavy Plate Cataphractii Sets","description":"\u003cp\u003eThe 1st Edition Cataphractii Shoulder Sets were created for use with the initial plastic Cataphractii-pattern Terminator kits. These original kits had both the left and right shoulder pads as two pieces; our custom sets made both shoulders a single piece, simplifying assembly. Each pauldron features custom emblems and details for easier painting and a uniform army appearance. With minor modifications, they can also fit other Terminator and Gravis armor units, like Aggressors.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395679723840,"sku":"7572614-4CRYSTAL","price":21.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395679756608,"sku":"7572614-4ARMOR","price":22.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_23299316_12892807_1686938374_1_0_e8455399-5dcc-4b87-a00e-0c0ddb4f3444.jpg?v=1695936627"},{"product_id":"5x-spiked-edge-t-5a-yaren-plate-shoulder-sets","title":"5x Spiked Edge - 1st Ed. Heavy Plate Cataphractii Sets","description":"\u003cp\u003eThe 1st Edition Cataphractii Shoulder Sets were created for use with the initial plastic Cataphractii-pattern Terminator kits. These original kits had both the left and right shoulder pads as two pieces; our custom sets made both shoulders a single piece, simplifying assembly. Each pauldron features custom emblems and details for easier painting and a uniform army appearance. With minor modifications, they can also fit other Terminator and Gravis armor units, like Aggressors.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395679658304,"sku":"7572683-4CRYSTAL","price":21.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395679691072,"sku":"7572683-4ARMOR","price":22.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_23299456_12892920_1686938374_1_0_3bafed1d-5196-4393-bfcd-80ce84852eab.jpg?v=1695936588"},{"product_id":"20x-skull-small-bent-insignias-5mm","title":"20x Skull - Small Bent Insignias (5mm)","description":"These insignia are roughly 3mm and are designed to fit on any curved or cylindrical area of your favorite models. We find they work best on the shins of Marine, Aggressors, Centurions, and Power Fists. They even work on some of the curved areas on smaller models and scenery pieces. They are meant to personalize your army by providing a raised emblem that makes painting easy and ensures a consistent and uniform appearance. As an added benefit, this product makes it possible to add your favorite insignia to models you’ve already painted. Simply prime, paint and glue (Super Glue) to ensure a clean look.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395678740800,"sku":"7584393-4CRYSTAL","price":13.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395678773568,"sku":"7584393-4ARMOR","price":14.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_23331444_12907156_1686938375_1_0_c801a973-399d-4837-bdfc-6f4b0c788223.jpg?v=1693504284"},{"product_id":"20x-skull-tiny-convex-insignias-3mm","title":"20x Skull - Tiny Convex Insignias (3mm)","description":"These insignia are roughly 3mm and are designed to fit on any shoulder-like or convex area of your favorite models. We find they work best on Marine knees, Scout shoulder, Imperial Guard and other human-sized model shoulder pads. They even work on some of the small convex areas of vehicle models and scenery pieces. They are meant to personalize your army by providing a raised emblem that makes painting easy and ensures a consistent and uniform appearance. As an added benefit, this product makes it possible to add your favorite insignia to models you’ve already painted. Simply prime, paint and glue (Super Glue) to ensure a clean look.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395678609728,"sku":"7584463-4CRYSTAL","price":17.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395678642496,"sku":"7584463-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_28552688_12907249_1686938375_1_0_cf3ce13a-392e-4c16-b7bb-ba630c72ac85.jpg?v=1693504269"},{"product_id":"blank-trojan-power-shields-l-r","title":"Icon-Ready : Trojan Power Shields (L\u0026R)","description":"\u003cp\u003e\u003cstrong\u003eThe Trojan Power Shield\u003c\/strong\u003e was inspired by the ancient Greek shields carried by the infantry, sometimes referred to as a hoplon. Each set includes both Left and Right-Handed shields (in equal numbers) designed to fit any of your favorite 28mm marine models. The shield includes the hand holding it, so adding it to your model requires just a minor amount of hobby skill. Simply snip off most of the marine model's forearm to the pitch or angle you prefer. They are sold unpainted, but the raised emblems and details make painting easy, ensuring a consistent and uniform appearance.*  \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3 \/ 6 Shields","offer_id":50381645906240,"sku":"20000539-4MR3","price":17.5,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3 \/ 10 Shields","offer_id":50381645939008,"sku":"20000540-4MR3","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 2 Shields","offer_id":49395673792832,"sku":"7726185-4CRYSTAL","price":14.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 10 Shields","offer_id":49395673825600,"sku":"7726184-4CRYSTAL","price":28.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 2 Shields","offer_id":49395673858368,"sku":"7726185-4ARMOR","price":15.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 10 Shields","offer_id":49395673891136,"sku":"7726184-4ARMOR","price":31.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/710x528_23726170_13086230_1695838898_1_0.jpg?v=1695838960"},{"product_id":"10x-base-marine-snipe-rifle-hp1","title":"10x Marine: HP1a Snipe-Rifle","description":"\u003cp\u003e\u003cstrong\u003eOur one-handed Bolt Weapons\u003c\/strong\u003e are inspired by the diverse styles, accessories, and motifs used by the various chapters and factions. We offer a range of options, from standard-issue Bolt Guns and Bolt Pistols for your frontline troops to high-powered Sniper and Bolt Rifles your elite, ensuring you have the right weapon for every occasion. These custom-designed weapons come unpainted and are intended to replace the weapons on your new or classic 28mm scale marine models.*\u003c\/p\u003e\n\u003cp\u003eThese weapons incorporate only a single right hand holding the gun. They are typically used with models that already have the left arm ready to hold the gun stock, holding a different item, or gesturing in another way. This set is not recommended for models that require both hands to be part of the weapon. For those needs, we recommend any of our 2-handed Sets (Prime, 30k, etc.)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395673727296,"sku":"7727654-4CRYSTAL","price":23.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395673760064,"sku":"7727654-4ARMOR","price":24.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_23720665_13086308_1686938378_1_0_2cf36ae6-37a0-49ff-8914-b1f128691d43.jpg?v=1693503785"},{"product_id":"10x-base-scout-snipe-rifle-hp1","title":"10x Human: HP1b Snipe-Rifle","description":"\u003cp\u003e\u003cstrong\u003eOur one-handed Bolt Weapons\u003c\/strong\u003e are inspired by the diverse styles, accessories, and motifs used by the various factions of the empire. We offer a range of options, from standard-issue Bolt Pistols for your frontline troops to high-powered Sniper and Bolt guns your elite, ensuring you have the right weapon for every occasion. These custom-designed weapons come unpainted and are intended to replace the weapons on your new or classic 28mm scale marine models.*\u003c\/p\u003e\n\u003cp\u003eThese weapons incorporate only a single right hand holding the gun. They are typically used with models that already have the left arm ready to hold the gun stock, holding a different item, or gesturing in another way. This set is not recommended for models that require both hands to be part of the weapon. For those needs, we recommend any of our 2-handed Sets (Prime, 30k, etc.)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395673596224,"sku":"7727675-4CRYSTAL","price":23.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395673628992,"sku":"7727675-4ARMOR","price":24.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_23720710_13086340_1686938378_1_0_ab300be4-6f1e-4b01-b9fc-dde93ff2d87b.jpg?v=1755133386"},{"product_id":"10x-dragon-head-scout-snipe-rifle-hp1","title":"10x Dragon Head: Human HP1b Snipe-Rifle","description":"\u003cp\u003e\u003cstrong\u003eOur one-handed Bolt Weapons\u003c\/strong\u003e are inspired by the diverse styles, accessories, and motifs used by the various factions of the empire. We offer a range of options, from standard-issue Bolt Pistols for your frontline troops to high-powered Sniper and Bolt guns your elite, ensuring you have the right weapon for every occasion. These custom-designed weapons come unpainted and are intended to replace the weapons on your new or classic 28mm scale marine models.*\u003c\/p\u003e\n\u003cp\u003eThese weapons incorporate only a single right hand holding the gun. They are typically used with models that already have the left arm ready to hold the gun stock, holding a different item, or gesturing in another way. This set is not recommended for models that require both hands to be part of the weapon. For those needs, we recommend any of our 2-handed Sets (Prime, 30k, etc.)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395672908096,"sku":"7729434-4CRYSTAL","price":23.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395672940864,"sku":"7729434-4ARMOR","price":24.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_23736056_13092683_1686938379_1_0_95c99d2c-54ea-4a3b-86c7-e627c506a851.jpg?v=1693503725"},{"product_id":"20x-chaos-maul-tiny-convex-insignias-3mm","title":"20x Chaos Maul - Tiny Convex Insignias (3mm)","description":"These insignia are roughly 3mm and are designed to fit on any shoulder-like or convex area of your favorite models. We find they work best on Marine knees, Scout shoulder, Imperial Guard and other human-sized model shoulder pads. They even work on some of the small convex areas of vehicle models and scenery pieces. They are meant to personalize your army by providing a raised emblem that makes painting easy and ensures a consistent and uniform appearance. As an added benefit, this product makes it possible to add your favorite insignia to models you’ve already painted. Simply prime, paint and glue (Super Glue) to ensure a clean look.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395667501376,"sku":"7875701-4CRYSTAL","price":17.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395667534144,"sku":"7875701-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_28576431_13272973_1686938381_1_0_864f997e-f75e-4e9f-8ca1-96c97930bb90.jpg?v=1693503311"},{"product_id":"60x-chaos-maul-shoulder-insignia-pack","title":"60x Chaos Maul - Shoulder Insignia pack","description":"This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or mono-pose sculpts. They are intended to personalize your army by providing a raised emblem that makes painting easier and helps create a consistent, uniform look. As an additional benefit, this product allows you to add your favorite insignia to models you’ve already painted. Simply prime, paint, and glue (Super Glue) to achieve a clean appearance.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395667272000,"sku":"7875702-4CRYSTAL","price":25.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395667304768,"sku":"7875702-4ARMOR","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_24134508_13272995_1686938381_1_0_285eca07-c8be-49db-95a3-9e497fd34b81.jpg?v=1693503300"},{"product_id":"4x10-squad-making-multipack","title":"4x10 Squad Making MultiPack","description":"\u003cem\u003eThis pack contains 10 Tactical, 10 Assault, 10 Devestator, and 10 Comand marks,\u003c\/em\u003e designed to fit on shoulder-like or rounded area of your favorite models. These are meant to personalize your army by providing a raised emblem that makes painting easy and ensures a consistent and uniform appearance. As an added benefit, this product makes it possible to add your favorite insignia to models you’ve already painted. Simply prime, paint and glue (Super Glue) to ensure a clean look.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395666551104,"sku":"7879317-4CRYSTAL","price":23.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395666583872,"sku":"7879317-4ARMOR","price":25.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_24144702_13276822_1686938382_1_0_c754785f-ee9a-4329-a1b9-93305fcb8747.jpg?v=1693503211"},{"product_id":"10x-blank-libretto-shields-hs","title":"10x Blank - Libretto Shields (HS)","description":"\u003cem\u003e\u003cstrong\u003eThese shields are designed to fit human-sized \u003cspan style=\"color: #ff2a00;\"\u003e(HS)\u003c\/span\u003e\u003c\/strong\u003e models\u003c\/em\u003e such as guardsmen, crusaders, cultists, henchmen, and even some Age of Sigmar or D\u0026amp;D models. Sold unpainted, each shield has a right hand, holding the shield, incorporated into it. Simply snip off part of your model’s arm and super glue into position. The raised emblem and detail on the shield makes painting easy and ensures a consistent, uniform appearance to your entire army.*\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e  \u003cbr\u003e \u003cbr\u003e *NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395664912704,"sku":"7995333-4CRYSTAL","price":19.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395664945472,"sku":"7995333-4ARMOR","price":20.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_24501978_13423837_1686938388_1_0_72ea4439-cce7-4383-8353-61e966487ec5.jpg?v=1693502996"},{"product_id":"skull-banner-standard-apc-frontplate","title":"Skull Banner : Standard APC Frontplate","description":"Enhance and personalize your standard marine troop carrier with this unique Armored Personnel Carrier (APC) Frontplate. Sold unpainted, this part is meant to replace the corresponding part of the model kit.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395657965888,"sku":"7015363-4CRYSTAL","price":16.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395657998656,"sku":"7015363-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_21643084_12188003_1686938356_1_0_e9ae46d5-92ac-4db9-b0d6-cae2b2fad0c5.jpg?v=1693502154"},{"product_id":"studded-gryphus-jetpack-pm","title":"Studded Gryphus Jetpack (PM)","description":"\u003cp\u003e\u003cstrong\u003eThe Gryphus Jetpack (PM)\u003c\/strong\u003e is a custom designed Jetpacks that is meant to replace the backpacks of the new “Prime” marine models to turn it into an assault trooper. Styled like the classic jump pack they will give your troops a unique profile on the tabletop. They are sold unpainted but, incorporates raised emblems and details to make painting easier and ensures a consistent and uniform appearance for your army.*\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3 \/ 5 Jetpacks","offer_id":50297610207552,"sku":"20000230-4MR3","price":18.5,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3 \/ 10 Jetpacks","offer_id":50297610240320,"sku":"20000231-4MR3","price":28.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 5 Jetpacks","offer_id":49395655180608,"sku":"7079367-4CRYSTAL","price":32.0,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ Just 1","offer_id":49395655147840,"sku":"9530212-4CRYSTAL","price":15.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 5 Jetpacks","offer_id":49395655246144,"sku":"7079367-4ARMOR","price":36.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Just 1","offer_id":49395655213376,"sku":"9530212-4ARMOR","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_21844153_12269937_1691950211_1_0.jpg?v=1768844164"},{"product_id":"10x-rapfire-dc1-defender","title":"10x Marine : Mk1c Rapfire Aggressor","description":"\u003cp\u003e\u003cstrong\u003eOur one-handed Combo Weapon\u003c\/strong\u003e range is inspired by the diverse variety of combi-weapons. From an over-under design for standard line troops to the side-by-side variants for Terminators, you'll find the specialized weapon you need for any occasion. These custom-designed weapons are sold unpainted and are intended to replace the weapons of your new or classic 28mm scale marine models.*\u003c\/p\u003e\n\u003cp\u003eThese weapons incorporate only a single right hand holding the gun. They are typically used with models that already have the left arm ready to hold the gun stock, holding a different item, or gesturing in another way. This set is not recommended for models that require both hands to be part of the weapon. For those needs, we recommend any of our 2-handed Sets (Prime, 30k, etc.).\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395654984000,"sku":"7093550-4CRYSTAL","price":23.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395655016768,"sku":"7093550-4ARMOR","price":24.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_21892272_12288179_1686938358_1_0_813e061c-5815-49bf-9976-72a8fedf8775.jpg?v=1755131832"},{"product_id":"10x-volkfire-bc1","title":"10x Marine: Mk1b Volkbolter","description":"\u003cp\u003e\u003cstrong\u003eOur one-handed Combo Weapon\u003c\/strong\u003e range is inspired by the diverse variety of combi-weapons. From an over-under design for standard line troops to the side-by-side variants for Terminators, you'll find the specialized weapon you need for any occasion. These custom-designed weapons are sold unpainted and are intended to replace the weapons of your new or classic 28mm scale marine models.*\u003c\/p\u003e\n\u003cp\u003eThese weapons incorporate only a single right hand holding the gun. They are typically used with models that already have the left arm ready to hold the gun stock, holding a different item, or gesturing in another way. This set is not recommended for models that require both hands to be part of the weapon. For those needs, we recommend any of our 2-handed Sets (Prime, 30k, etc.).\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395652985152,"sku":"7185857-4CRYSTAL","price":18.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395653017920,"sku":"7185857-4ARMOR","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_22167787_12403840_1686938359_1_0_b3bcf67e-8ba4-4448-b179-1a86ff34e1f0.jpg?v=1755131616"},{"product_id":"10x-blank-marine-shotgun-pa1-5-l-r","title":"10x Marine : Mk1p Shotguns (L\u0026R)","description":"\u003cp\u003eOur one-handed Special Weapons are inspired by the wide variety of technology wielded in the far future. From the liquid-fueled flame throwers to the to the ancient high intensity Volk weaponry; we strive to have what you need for every occasion. These custom-designed weapons are sold unpainted and meant to replace the weapons of your new or classic 28mm scale marine models.*\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eThis set of contains \u003cem\u003e5 left-handed \u003c\/em\u003eand \u003cem\u003e5 right-handed\u003c\/em\u003e shotguns. \u003c\/strong\u003eThey are typically used with models that already have the left arm ready to hold the gun stock, holding a different item, or gesturing in another way. This set is not recommended for models that require both hands to be part of the weapon. For those needs, we recommend any of our 2-handed Sets (Prime, 30k, etc.)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395651641664,"sku":"7211816-4CRYSTAL","price":18.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395651674432,"sku":"7211816-4ARMOR","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_22253586_12437472_1686938360_1_0_e3d7981a-de2f-4db3-b793-d553fae45a26.jpg?v=1767730950"},{"product_id":"10x-blank-marine-shotgun-pa1-right","title":"10x Marine : Mk1p Shotguns","description":"\u003cp\u003e\u003cstrong\u003eOur one-handed Special Weapons\u003c\/strong\u003e are inspired by the wide variety of technology wielded in the far future. From the liquid-fueled flame throwers to the to the ancient high intensity Volk weaponry; we strive to have what you need for every occasion. These custom-designed weapons are sold unpainted and meant to replace the weapons of your new or classic 28mm scale marine models.*\u003c\/p\u003e\n\u003cp\u003eThese weapons incorporate only a single right hand holding the gun. They are typically used with models that already have the left arm ready to hold the gun stock, holding a different item, or gesturing in another way. This set is not recommended for models that require both hands to be part of the weapon. For those needs, we recommend any of our 2-handed Sets (Prime, 30k, etc.)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395651576128,"sku":"7211820-4CRYSTAL","price":18.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395651608896,"sku":"7211820-4ARMOR","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_22253752_12437570_1686938360_1_0_96fe972b-ec81-407c-93fe-75767adac49b.jpg?v=1767730785"},{"product_id":"10x-grenadier-mk1-right","title":"10x Marine: Mk1b Bolt Grenadier","description":"\u003cp\u003e\u003cstrong\u003eOur one-handed Combo Weapon\u003c\/strong\u003e range is inspired by the diverse variety of combi-weapons. From an over-under design for standard line troops to the side-by-side variants for Terminators, you'll find the specialized weapon you need for any occasion. These custom-designed weapons are sold unpainted and are intended to replace the weapons of your new or classic 28mm scale marine models.*\u003c\/p\u003e\n\u003cp\u003eThese weapons incorporate only a single right hand holding the gun. They are typically used with models that already have the left arm ready to hold the gun stock, holding a different item, or gesturing in another way. This set is not recommended for models that require both hands to be part of the weapon. For those needs, we recommend any of our 2-handed Sets (Prime, 30k, etc.).\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395651412288,"sku":"7211828-4CRYSTAL","price":18.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395651445056,"sku":"7211828-4ARMOR","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_22254175_12437666_1686938360_1_0_6a764df5-a008-4df0-b51f-f78f0a6db44c.jpg?v=1755131458"},{"product_id":"10x-grenadier-mk2-right","title":"10x Marine: Mk1a Bolt Grenadier","description":"\u003cp\u003e\u003cstrong\u003eOur one-handed Combo Weapon\u003c\/strong\u003e range is inspired by the diverse variety of combi-weapons. From an over-under design for standard line troops to the side-by-side variants for Terminators, you'll find the specialized weapon you need for any occasion. These custom-designed weapons are sold unpainted and are intended to replace the weapons of your new or classic 28mm scale marine models.*\u003c\/p\u003e\n\u003cp\u003eThese weapons incorporate only a single right hand holding the gun. They are typically used with models that already have the left arm ready to hold the gun stock, holding a different item, or gesturing in another way. This set is not recommended for models that require both hands to be part of the weapon. For those needs, we recommend any of our 2-handed Sets (Prime, 30k, etc.).\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395651346752,"sku":"7211821-4CRYSTAL","price":18.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395651379520,"sku":"7211821-4ARMOR","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-Rapfire-GL2-Common.png?v=1755131312"},{"product_id":"10x-grenadier-mk1-w-scope-right","title":"10x Marine: Mk1b Bolt Grenadier Marksman","description":"\u003cp\u003e\u003cstrong\u003eOur one-handed Combo Weapon\u003c\/strong\u003e range is inspired by the diverse variety of combi-weapons. From an over-under design for standard line troops to the side-by-side variants for Terminators, you'll find the specialized weapon you need for any occasion. These custom-designed weapons are sold unpainted and are intended to replace the weapons of your new or classic 28mm scale marine models.*\u003c\/p\u003e\n\u003cp\u003eThese weapons incorporate only a single right hand holding the gun. They are typically used with models that already have the left arm ready to hold the gun stock, holding a different item, or gesturing in another way. This set is not recommended for models that require both hands to be part of the weapon. For those needs, we recommend any of our 2-handed Sets (Prime, 30k, etc.).\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395651281216,"sku":"7211825-4CRYSTAL","price":23.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395651313984,"sku":"7211825-4ARMOR","price":24.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_22254560_12437775_1686938360_1_0_57daf83a-b02e-40f1-b538-10b7e3fa6e88.jpg?v=1693501431"},{"product_id":"mech-skull-flat-vehicle-insignia-pack","title":"Mech Skull - Flat Vehicle Insignia pack","description":"\u003cp\u003eThis Vehicle Insignia pack includes several flat, roughly 2mm thick emblems in various lengths and widths, designed to fit numerous open spots on your favorite vehicles, large models, and fortifications. These spots include the multiple doors, hatches, and front plates of a traditional legion-branded vehicle kit.*\u003cbr\u003e\u003cbr\u003eIf you opt for the TufFlex material, it offers the added advantage of being flexible, allowing it to conform to curved surfaces. This is most effective on the larger insignia and works best when heated slightly. Our Classic material, however, is brittle and will snap under such pressure. Still, it’s an excellent choice for the many smooth, flat surfaces of most imperial models. Neither material reacts with Plastic Glue; use Super Glue to attach these parts to your models.\u003cbr\u003e\u003cbr\u003eOnce glued onto your project, these emblems create a raised decoration that simplifies painting and ensures a consistent, uniform look across your entire collection. You can also prime and paint these insignia first, then glue them onto already painted models. However, we recommend keeping the contact surfaces clean to ensure a secure bond with your glue.\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395650298176,"sku":"7243563-4CRYSTAL","price":40.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395650330944,"sku":"7243563-4ARMOR","price":46.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_22344010_12476807_1686938361_1_0_75535ad0-104c-4128-98d7-20e39fde1826.jpg?v=1693501356"},{"product_id":"10x-blank-g-1a-shoulder-pads","title":"10x Blank - G:1a Shoulder Pads","description":"The Generation 1 styles of shoulder pads are inspired to represent the Mark 1: Thunder armor. Our customers find that these pads are compatible with most new and classic 28mm scale marine models. Sold unpainted, each pauldron features custom-designed raised emblems, details, and patterns that simplify the painting process, ensuring a consistent and uniform appearance for your entire army.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395649085760,"sku":"7248112-4CRYSTAL","price":16.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395649118528,"sku":"7248112-4ARMOR","price":17.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_22356674_12482384_1686938361_1_0_1a97e588-7062-4785-92d9-df91f88b1e6f.jpg?v=1693501257"},{"product_id":"10x-blank-g-1b-shoulder-pads","title":"10x Blank - G:1b Shoulder Pads","description":"The Generation 1 styles of shoulder pads are inspired to represent the Mark 1: Thunder armor. Our customers find that these pads are compatible with most new and classic 28mm scale marine models. Sold unpainted, each pauldron features custom-designed raised emblems, details, and patterns that simplify the painting process, ensuring a consistent and uniform appearance for your entire army.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395649020224,"sku":"7248457-4CRYSTAL","price":16.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395649052992,"sku":"7248457-4ARMOR","price":17.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_22358324_12482799_1686938361_1_0_5ad9b204-3342-4d7d-b901-1e1d56907e17.jpg?v=1693501248"},{"product_id":"20x-standard-m1-combat-pistols-10-l-r","title":"20x Standard M1 Combat Pistols (10 L\u0026R)","description":"Combat Pistols are designed to represent a standard issue bolt pistol and comes with \u003cem\u003e10 left-handed\u003c\/em\u003e and \u003cem\u003e10 right-handed pistols\u003c\/em\u003e. These custom designed weapons are sold unpainted and meant to replace the weapons of your new or classic 28mm scale, marine models in order to enhance and personalize them.*\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cbr\u003e\r\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395646988608,"sku":"7288909-4CRYSTAL","price":23.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395647021376,"sku":"7288909-4ARMOR","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_41736525_12533725_1709058513_1_0.jpg?v=1709060424"},{"product_id":"20x-standard-m1-operative-pistols-10-l-r","title":"20x Standard M1 Operative Pistols (10 L\u0026R)","description":"Combat Pistols are designed to represent a standard issue bolt pistol and comes with \u003cem\u003e10 left-handed\u003c\/em\u003e and \u003cem\u003e10 right-handed pistols\u003c\/em\u003e. These custom designed weapons are sold unpainted and meant to replace the weapons of your new or classic 28mm scale, marine models in order to enhance and personalize them.*\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cbr\u003e\r\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395646923072,"sku":"7288912-4CRYSTAL","price":28.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395646955840,"sku":"7288912-4ARMOR","price":31.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_41736537_12533833_1709058802_1_0.jpg?v=1709060446"},{"product_id":"20x-standard-m1-suppressor-pistols-10-l-r","title":"20x Standard M1 Suppressor Pistols (10 L\u0026R)","description":"Combat Pistols are designed to represent a standard issue bolt pistol and comes with \u003cem\u003e10 left-handed \u003c\/em\u003eand\u003cem\u003e 10 right-handed pistols.\u003c\/em\u003e These custom designed weapons are sold unpainted and meant to replace the weapons of your new or classic 28mm scale, marine models in order to enhance and personalize them.*\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cbr\u003e\r\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395646857536,"sku":"7288911-4CRYSTAL","price":26.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395646890304,"sku":"7288911-4ARMOR","price":27.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_41736616_12533939_1709059913_1_0.jpg?v=1709060436"},{"product_id":"20x-standard-m2-combat-pistols-10-l-r","title":"20x Standard M2 Combat Pistols (10 L\u0026R)","description":"Combat Pistols are designed to represent a standard issue bolt pistol and comes with \u003cem\u003e10 left-handed \u003c\/em\u003eand\u003cem\u003e 10 right-handed pistols.\u003c\/em\u003e These custom designed weapons are sold unpainted and meant to replace the weapons of your new or classic 28mm scale, marine models in order to enhance and personalize them.*\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cbr\u003e\r\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395646759232,"sku":"7288915-4CRYSTAL","price":22.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395646792000,"sku":"7288915-4ARMOR","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_41736582_12533963_1709059647_1_0.jpg?v=1709060380"},{"product_id":"20x-standard-m1-marksman-pistols-10-l-r","title":"20x Standard M1 Marksman Pistols (10 L\u0026R)","description":"Combat Pistols are designed to represent a standard issue bolt pistol and comes with \u003cem\u003e10 left-handed\u003c\/em\u003e and \u003cem\u003e10 right-handed pistols\u003c\/em\u003e. These custom designed weapons are sold unpainted and meant to replace the weapons of your new or classic 28mm scale, marine models in order to enhance and personalize them.*\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cbr\u003e\r\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395646234944,"sku":"7298021-4CRYSTAL","price":25.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395646267712,"sku":"7298021-4ARMOR","price":27.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_41736573_12544792_1709060089_1_0.jpg?v=1709060414"},{"product_id":"10x-eye-of-change-osiris-shoulder-pads","title":"10x Eye of Change - Osiris Shoulder Pads","description":"The Osiris shoulder pads draw inspiration from the Egyptian motif of the Thousand Sons Rubric Armor. Our customers find these pads compatible with most new and classic 28mm scale marine models, but they look best on Thousand Sons Marine Models. Sold unpainted, each pauldron features custom-designed raised emblems, details, and patterns that make painting easier, ensuring a consistent and uniform look for your entire army.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395642532160,"sku":"7965095-4CRYSTAL","price":16.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395642564928,"sku":"7965095-4ARMOR","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_24411463_13385180_1686938385_1_0_3680cd42-3186-4bbc-9db5-d81eae88de5e.jpg?v=1693500530"},{"product_id":"60x-eye-of-change-shoulder-insignia-pack-l-r","title":"60x Eye of Change : Shoulder Insignia pack (L\u0026R)","description":"This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or mono-pose sculpts. They are intended to personalize your army by providing a raised emblem that makes painting easier and helps create a consistent, uniform look. As an additional benefit, this product allows you to add your favorite insignia to models you’ve already painted. Simply prime, paint, and glue (Super Glue) to achieve a clean appearance.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395642270016,"sku":"7965486-4CRYSTAL","price":25.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395642302784,"sku":"7965486-4ARMOR","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_24412148_13385552_1686938385_1_0_0f6cc814-bced-4264-8af6-b9135c91d43b.jpg?v=1693500509"},{"product_id":"20x-ogothic-5-tiny-convex-insignias-3mm","title":"20x Ogothic #5 - Tiny Convex Insignias (3mm)","description":"These insignia are roughly 3mm and are designed to fit on any shoulder-like or convex area of your favorite models. We find they work best on Marine knees, Scout shoulder, Imperial Guard and other human-sized model shoulder pads. They even work on some of the small convex areas of vehicle models and scenery pieces. They are meant to personalize your army by providing a raised emblem that makes painting easy and ensures a consistent and uniform appearance. As an added benefit, this product makes it possible to add your favorite insignia to models you’ve already painted. Simply prime, paint and glue (Super Glue) to ensure a clean look.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395641614656,"sku":"7975244-4CRYSTAL","price":17.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395641647424,"sku":"7975244-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_28588047_13408466_1686938386_1_0_132cfc0e-0d20-456c-8ebb-b81fc49a526b.jpg?v=1693500424"},{"product_id":"20x-ogothic-6-tiny-convex-insignias-3mm","title":"20x Ogothic #6 - Tiny Convex Insignias (3mm)","description":"These insignia are roughly 3mm and are designed to fit on any shoulder-like or convex area of your favorite models. We find they work best on Marine knees, Scout shoulder, Imperial Guard and other human-sized model shoulder pads. They even work on some of the small convex areas of vehicle models and scenery pieces. They are meant to personalize your army by providing a raised emblem that makes painting easy and ensures a consistent and uniform appearance. As an added benefit, this product makes it possible to add your favorite insignia to models you’ve already painted. Simply prime, paint and glue (Super Glue) to ensure a clean look.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395641516352,"sku":"7975245-4CRYSTAL","price":17.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395641549120,"sku":"7975245-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_28588068_13408484_1686938386_1_0_ad346837-410f-45e4-aa26-a261d0827611.jpg?v=1693500406"},{"product_id":"20x-ogothic-7-tiny-convex-insignias-3mm","title":"20x Ogothic #7 - Tiny Convex Insignias (3mm)","description":"These insignia are roughly 3mm and are designed to fit on any shoulder-like or convex area of your favorite models. We find they work best on Marine knees, Scout shoulder, Imperial Guard and other human-sized model shoulder pads. They even work on some of the small convex areas of vehicle models and scenery pieces. They are meant to personalize your army by providing a raised emblem that makes painting easy and ensures a consistent and uniform appearance. As an added benefit, this product makes it possible to add your favorite insignia to models you’ve already painted. Simply prime, paint and glue (Super Glue) to ensure a clean look.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395641418048,"sku":"7975246-4CRYSTAL","price":17.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395641450816,"sku":"7975246-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_28588086_13408500_1686938386_1_0_103c0eb1-50a8-4dc9-942e-6422e907ae86.jpg?v=1693500389"},{"product_id":"20x-ogothic-8-tiny-convex-insignias-3mm","title":"20x Ogothic #8 - Tiny Convex Insignias (3mm)","description":"These insignia are roughly 3mm and are designed to fit on any shoulder-like or convex area of your favorite models. We find they work best on Marine knees, Scout shoulder, Imperial Guard and other human-sized model shoulder pads. They even work on some of the small convex areas of vehicle models and scenery pieces. They are meant to personalize your army by providing a raised emblem that makes painting easy and ensures a consistent and uniform appearance. As an added benefit, this product makes it possible to add your favorite insignia to models you’ve already painted. Simply prime, paint and glue (Super Glue) to ensure a clean look.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395641221440,"sku":"7975247-4CRYSTAL","price":17.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395641254208,"sku":"7975247-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_28588112_13408529_1686938386_1_0_8ff13717-b8fe-402f-87f7-d4860901e581.jpg?v=1693500374"},{"product_id":"20x-ogothic-9-tiny-convex-insignias-3mm","title":"20x Ogothic #9 - Tiny Convex Insignias (3mm)","description":"These insignia are roughly 3mm and are designed to fit on any shoulder-like or convex area of your favorite models. We find they work best on Marine knees, Scout shoulder, Imperial Guard and other human-sized model shoulder pads. They even work on some of the small convex areas of vehicle models and scenery pieces. They are meant to personalize your army by providing a raised emblem that makes painting easy and ensures a consistent and uniform appearance. As an added benefit, this product makes it possible to add your favorite insignia to models you’ve already painted. Simply prime, paint and glue (Super Glue) to ensure a clean look.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395641155904,"sku":"7975248-4CRYSTAL","price":17.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395641188672,"sku":"7975248-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_28588139_13408574_1686938386_1_0_a43a2e34-8afe-4a3c-8dc9-b602c3885b80.jpg?v=1693500359"},{"product_id":"2x-ogothic-number-set-tiny-convex-insignias-3mm","title":"2x Ogothic Number Set - Tiny Convex Insignias (3mm","description":"These insignia are roughly 3mm and are designed to fit on any shoulder-like or convex area of your favorite models. We find they work best on Marine knees, Scout shoulder, Imperial Guard and other human-sized model shoulder pads. They even work on some of the small convex areas of vehicle models and scenery pieces. They are meant to personalize your army by providing a raised emblem that makes painting easy and ensures a consistent and uniform appearance. As an added benefit, this product makes it possible to add your favorite insignia to models you’ve already painted. Simply prime, paint and glue (Super Glue) to ensure a clean look.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395641024832,"sku":"7975251-4CRYSTAL","price":17.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395641057600,"sku":"7975251-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_28588232_13408661_1686938386_1_0_6dcc68c0-6928-425b-915b-2d4431301170.jpg?v=1693500326"},{"product_id":"20x-wolf-skull-tiny-convex-insignias-3mm","title":"20x Wolf Skull - Tiny Convex Insignias (3mm)","description":"These insignia are roughly 3mm and are designed to fit on any shoulder-like or convex area of your favorite models. We find they work best on Marine knees, Scout shoulder, Imperial Guard and other human-sized model shoulder pads. They even work on some of the small convex areas of vehicle models and scenery pieces. They are meant to personalize your army by providing a raised emblem that makes painting easy and ensures a consistent and uniform appearance. As an added benefit, this product makes it possible to add your favorite insignia to models you’ve already painted. Simply prime, paint and glue (Super Glue) to ensure a clean look.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395639976256,"sku":"8112766-4CRYSTAL","price":17.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395640009024,"sku":"8112766-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_28612679_13570670_1686938393_1_0_1cbe5f42-a922-459f-873c-bee890afd9fd.jpg?v=1693500193"},{"product_id":"5x-studded-t-2a-cataphractii-shoulder-sets","title":"5x Studded - 1st Ed. Cataphractii Shoulder Sets","description":"The 1st Edition Cataphractii Shoulder Sets were created for use with the initial plastic Cataphractii-pattern Terminator kits. These original kits had both the left and right shoulder pads as two pieces; our custom sets made both shoulders a single piece, simplifying assembly. Each pauldron features custom emblems and details for easier painting and a uniform army appearance. With minor modifications, they can also fit other Terminator and Gravis armor units, like Aggressors.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395639353664,"sku":"7306316-4CRYSTAL","price":21.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395639386432,"sku":"7306316-4ARMOR","price":22.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_22530956_12554660_1686938363_1_0_16c19ff2-f2e6-45d5-94bf-d54ba601ec2b.jpg?v=1693500113"},{"product_id":"5x-square-spiked-t-2a-cataphractii-shoulder-sets","title":"5x Square Spiked - 1st Ed. Cataphractii Shoulder Sets","description":"The 1st Edition Cataphractii Shoulder Sets were created for use with the initial plastic Cataphractii-pattern Terminator kits. These original kits had both the left and right shoulder pads as two pieces; our custom sets made both shoulders a single piece, simplifying assembly. Each pauldron features custom emblems and details for easier painting and a uniform army appearance. With minor modifications, they can also fit other Terminator and Gravis armor units, like Aggressors.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395638862144,"sku":"7307417-4CRYSTAL","price":21.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395638894912,"sku":"7307417-4ARMOR","price":22.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_22534146_12556067_1686938364_1_0_e990183e-34f1-4c05-87e3-3ad80b5ef713.jpg?v=1693500060"},{"product_id":"phobos-battle-tank-twin-laser-turret-weapon","title":"Phobos\/Rhayus Turret Weapon: Twin Lasers","description":"\u003cp\u003e\u003cstrong\u003eThe Phobos\/Rhayus Turret Weapons\u003c\/strong\u003e are designed to be compatible with our Battle Tank turrets of the same names. Please note that this set does NOT include the base turret; it is an additional weapon option only.\u003c\/p\u003e\n\u003cp\u003eThis weapon uses an 8mm x 2mm disc magnet to secure it to the matching magnet in the turret. This set also includes an ammo\/power source element that attaches to the back of the Phobos Turret to enhance the weapon’s theme. That piece uses three 1mm x 3mm magnets to connect with the three magnets in the back of the turret.\u003c\/p\u003e\n\u003cp\u003eThis part is not needed with a Rhayus Turret, and some customers prefer to simply glue their favorite option in place on the Phobos to avoid using extra tiny magnets.\u003c\/p\u003e\n\u003cp\u003eCombine this set with our other vehicle weapons and upgrade parts to keep your models versatile and effective on the battlefield for years to come.*\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.  \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395636175168,"sku":"7381964-4CRYSTAL","price":26.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395636207936,"sku":"7381964-4ARMOR","price":29.0,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3","offer_id":51599653077312,"sku":"20002446-4MR3","price":13.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_22840717_12698329_1686938366_1_0_67e1607b-05bb-40a0-92d7-3caf03b44c9e.jpg?v=1772838732"},{"product_id":"10x-blank-human-sized-boarding-shields-w-hand","title":"10x Blank : Human-sized Boarding Shields w\/Hand","description":"\u003cp\u003e\u003cstrong\u003eThis kit includes 10 Right-Handed shields\u003c\/strong\u003e and are sold unpainted. They are designed to fit any of your favorite normal, \u003cspan style=\"color: #ff2a00;\"\u003ehuman-sized 28mm models\u003c\/span\u003e. The shield includes the hand holding it so, adding these to your model requires just a minor amount of hobby skill. Simply snip off part of a arm and super glue into position. Painting is made easy by providing a raised emblem and details ensuring a consistent and uniform appearance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3 \u003c\/strong\u003eis a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":52020160266560,"sku":"20002723-4MR3","price":16.0,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395634667840,"sku":"7445849-4CRYSTAL","price":20.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395634700608,"sku":"7445849-4ARMOR","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/710x528_22965632_12743255_1686938367_1_0_faf59c54-aa1c-453f-8e34-41281d090c91.png?v=1696013476"},{"product_id":"vehicle-insignia-ready-marine-boarding-shields","title":"Vehicle Insignia-Ready: Marine Boarding Shields","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eThe Marine Boarding shields\u003c\/strong\u003e are all left-handed, allowing your favorite 28mm marine models to interlock into a reinforced wall of firepower. These were designed for the classic marine models, but I've been told they still work great for the new 30k scale. You may find them a bit too small for the larger \"Prime\" models.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/popgoesthemonkey.com\/collections\/custom-vehicle-bits\/parts_-insignia-sets\" target=\"_blank\" title=\"Link to our Flat Vehicle Insignia options\" rel=\"noopener\"\u003eThis set works great with our Flat Vehicle Insignia Sets.\u003c\/a\u003e The round surface is flat so either material option is fine. Each shield includes a large open space to glue on one of those smaller insignias before or after you paint the shields. The raised emblems and details make painting easy, ensuring a consistent and uniform appearance.* \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3 \/ 5 Shields","offer_id":50410854449472,"sku":"20000678-4MR","price":14.5,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3 \/ 10 Shields","offer_id":50410854416704,"sku":"20000679-4MR3","price":21.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 5 Shields","offer_id":49395633979712,"sku":"9539471-4CRYSTAL","price":17.75,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 10 Shields","offer_id":49395633946944,"sku":"7459052-4CRYSTAL","price":24.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ Just 1","offer_id":49395633914176,"sku":"9539475-4CRYSTAL","price":13.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 5 Shields","offer_id":49395634045248,"sku":"9539471-4ARMOR","price":17.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 10 Shields","offer_id":49395634078016,"sku":"7459052-4ARMOR","price":26.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Just 1","offer_id":49395634012480,"sku":"9539475-4ARMOR","price":14.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_22974333_12752867_1686938367_1_0.jpg?v=1693499512"},{"product_id":"vehicle-insignia-ready-naxos-combat-shields","title":"Vehicle Insignia-Ready - Naxos Combat Shields","description":"\u003cp\u003e\u003cstrong\u003eNaxos Combat Shields\u003c\/strong\u003e feature an integrated bolt pistol that enables melee troops to carry both a ranged and a defensive option in their off-hand. These sets include an equal number of left- and right-handed shields designed to fit your favorite 28mm models, especially the new “Prime” marine models. Some might feel these shields are on the larger size for 30k and Firstborn Marines models, but they can create a cool, imposing appearance.*\u003c\/p\u003e\n\u003cp\u003eThe shields include the associated hand and part of the forearm that holds the shield. Attaching these to your model requires only a small amount of hobby skill, with no additional arms needed beyond those that come with your marine model. Simply select an arm from your kit (or your bits box), snip off the hand and part of the arm just before the elbow, and glue the shields in place. You could also add a set of our Adjustable Arms kits for this purpose, but it's not necessary. The shields come unpainted but feature raised emblems and details that make painting easy, helping you achieve a consistent and uniform look.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP \/ 2 Shields","offer_id":49395632865600,"sku":"9539122-4CRYSTAL","price":17.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 10 Sheilds","offer_id":49395632898368,"sku":"7477636-4CRYSTAL","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 6 Shields","offer_id":49395632931136,"sku":"9539137-4CRYSTAL","price":28.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 2 Shields","offer_id":49395632963904,"sku":"9539122-4ARMOR","price":18.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 6 Shields","offer_id":49395632996672,"sku":"9539137-4ARMOR","price":31.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 10 Sheilds","offer_id":49395633029440,"sku":"7477636-4ARMOR","price":44.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_23028502_12777249_1686938368_1_0.jpg?v=1693499389"},{"product_id":"20x-elite-6-small-bent-insignias-5mm","title":"20x Elite 6 - Small Bent Insignias (5mm)","description":"These insignia are roughly 5mm and are designed to fit on any curved or cylindrical area of your favorite models. We find they work best on the shins of Marine, Aggressors, Centurions, and Power Fists. They even work on some of the curved areas on smaller models and scenery pieces. They are meant to personalize your army by providing a raised emblem that makes painting easy and ensures a consistent and uniform appearance. As an added benefit, this product makes it possible to add your favorite insignia to models you’ve already painted. Simply prime, paint and glue (Super Glue) to ensure a clean look.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395620577600,"sku":"8801392-4CRYSTAL","price":13.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395620610368,"sku":"8801392-4ARMOR","price":14.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_26607108_14450961_1686938415_1_0_ebcec98c-95b0-438b-ab8a-e4affb0a73bf.jpg?v=1693498633"},{"product_id":"vegaram-steamruss-rockers","title":"Vegaram SteamRuss Rockers","description":"This custom designed bit is sold unpainted and meant to fit onto the back of a Leman Russ Battle Tank to recreate the mighty Vegaram SteamRuss or add to any tracked vehicle to give it an old-school look.\u003cbr\u003e\n​\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395619725632,"sku":"M8941317-4CRYSTAL","price":16.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395619758400,"sku":"M8941317-4ARMOR","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_26998279_14622978_1686938420_1_0_7024379d-2ac5-42a9-8583-e04653c443af.jpg?v=1693498466"},{"product_id":"vegaram-steamruss-turret-weapon-plasma-cutioner","title":"Vegaram SteamRuss Turret Weapon: Plasma-cutioner","description":"This custom designed turret weapon is sold unpainted and meant to fit onto my SteamRuss Battle Tank Turret. This turret weapon has an insert for a 8mm (Wide) x 2mm (Thick) magnet that matches the same size inset of the SteamRuss Turret to allow for easy and quick weapon changes.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395619660096,"sku":"8410452-4CRYSTAL","price":21.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395619692864,"sku":"8410452-4ARMOR","price":23.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_26998654_14623157_1686938420_1_0_615117a0-4caa-401c-a0e9-3ed1c682247f.jpg?v=1693498454"},{"product_id":"base-mega-chaos-ripcannon-w-arms","title":"Base - Mega Chaos Ripcannon w\/Arms","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNOTE: The \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSIZE\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e Selection Equates to \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eQuantity per Sprue\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e, NOT the Products’ Scale.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSmall\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e sprue = \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1 Gun\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMedium\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e sprue = \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2 Guns\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLarge\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e sprue = \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4 Guns\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eInspired by the original Rip Cannon, the Mega Ripcannon is just \u003cem\u003escaled up to fit the new larger space marines models. \u003c\/em\u003e\u003c\/strong\u003eThese custom designed weapons include the hands holding the gun and a set of Adjustable Arms to make adding this to your model easy. This pack also includes a extra ammo magazine and a stream of spent shell casing which you can add to each gun. They are sold unpainted but with the raised emblems and details makes painting easy, ensuring a consistent and uniform appearance.*\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e  \u003cbr\u003e \u003cbr\u003e *NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP \/ Small","offer_id":49395612942656,"sku":"9090046-4CRYSTAL","price":18.25,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ Medium","offer_id":49395612975424,"sku":"9090047-4CRYSTAL","price":26.25,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ Large","offer_id":49395613008192,"sku":"9090048-4CRYSTAL","price":41.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Small","offer_id":49395613040960,"sku":"9090046-4ARMOR","price":18.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Medium","offer_id":49395613073728,"sku":"9090047-4ARMOR","price":28.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Large","offer_id":49395613106496,"sku":"9090048-4ARMOR","price":47.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_27365433_14807181_1686938422_1_0_baed1389-f00a-4ac4-bcdd-bb4a2affe8dd.jpg?v=1693498108"},{"product_id":"base-mega-chaos-ripcannon","title":"Base - Mega Chaos Ripcannon","description":"NOTE: The \u003cstrong\u003eSIZE\u003c\/strong\u003e Selection Equates to \u003cstrong\u003eQuantity per Sprue\u003c\/strong\u003e, NOT the Products’ Scale.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSmall\u003c\/strong\u003e sprue = \u003cstrong\u003e1 Gun\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eMedium\u003c\/strong\u003e sprue = \u003cstrong\u003e2 Guns\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eLarge\u003c\/strong\u003e sprue = \u003cstrong\u003e4 Guns\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eInspired by the original Rip Cannon, the Mega Ripcannon is just \u003cem\u003escaled up to fit the new larger chaos space marines models. \u003c\/em\u003e\u003c\/strong\u003eThese custom designed weapons include the hands holding the gun, so adding these to your model requires some hobby skill. Simply snip off part of a marine arms you already have, or add a set of Adjustable Arms, from our store, to your order. They are sold unpainted but with the raised emblems and details makes painting easy, ensuring a consistent and uniform appearance.*\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e  \u003cbr\u003e \u003cbr\u003e *NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP \/ Medium","offer_id":49395607568704,"sku":"9092958-4CRYSTAL","price":20.0,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ Small","offer_id":49395607601472,"sku":"9090045-4CRYSTAL","price":15.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ Large","offer_id":49395607634240,"sku":"9092955-4CRYSTAL","price":30.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Small","offer_id":49395607667008,"sku":"9090045-4ARMOR","price":15.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Medium","offer_id":49395607699776,"sku":"9092958-4ARMOR","price":21.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Large","offer_id":49395607732544,"sku":"9092955-4ARMOR","price":33.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_27368600_14808746_1686938422_1_0.jpg?v=1693498041"}],"url":"https:\/\/popgoesthemonkey.com\/collections\/heretic-astartes\/system_kill-team-necrom.oembed","provider":"Pop Goes the Monkey","version":"1.0","type":"link"}