{"title":"Leviathan Wardens","description":"","products":[{"product_id":"5x-tribal-shark-jaw-t-2a-cataphractii-shoulders","title":"5x Tribal Shark Jaw - 1st Ed. Cataphractii Shoulder Sets","description":"The 1st Edition Cataphractii Shoulder Sets were created for use with the initial plastic Cataphractii-pattern Terminator kits. These original kits had both the left and right shoulder pads as two pieces; our custom sets made both shoulders a single piece, simplifying assembly. Each pauldron features custom emblems and details for easier painting and a uniform army appearance. With minor modifications, they can also fit other Terminator and Gravis armor units, like Aggressors.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395647414592,"sku":"7281022-4CRYSTAL","price":21.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395647447360,"sku":"7281022-4ARMOR","price":22.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_22451736_12523985_1686938362_1_0_d750af01-abd7-434c-81c2-b932a9262a51.jpg?v=1693501117"},{"product_id":"shark-jaw-multi-pack","title":"Shark Jaw : Multi-Pack 1","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThis multi-pack includes a wide variety of shark jaws that you can add to any of your models or bases. These unique detail pieces can provide the perfect aquatic or primal theme to enhance your models, scenery, or vehicles. The largest Jaws measures roughly 17mm (11\/16 inch) and the smallest 6mm (1\/4 inch).\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eNOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395587875136,"sku":"9281591-4CRYSTAL","price":31.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395587907904,"sku":"9281591-4ARMOR","price":33.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_27843125_15049305_1687965056_1_0_df966a78-1d49-4839-a533-ec1e75db44d1.jpg?v=1693495494"},{"product_id":"shark-jaws-multi-pack-2","title":"Shark Jaws \u0026 Teeth : Multi-Pack 2","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eThis multi-pack includes a wide variety of shark jaws and teeth that you can add to any of your models or bases. These unique detail pieces can provide the perfect aquatic or primal theme to enhance your models, scenery, or vehicles. The largest Jaws measures roughly 2 cm (3\/4 inch) and the smallest 8mm (5\/16 inch).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSculpted by our Sanctioned Artist: \u003ca href=\"https:\/\/www.artstation.com\/cesarohep1981\" target=\"_blank\" title=\"Artist website\" rel=\"noopener\"\u003eJuan Carlos\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eNOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":50648403181888,"sku":"20000889-4CRYSTAL","price":40.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":50648403214656,"sku":"20000889-4ARMOR","price":43.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-SharkJaws-MP2-01.png?v=1747333621"},{"product_id":"10x-mako-jaws-t-10b-indomitus-prime-pads","title":"10x Mako Jaws - 10th Ed. Terminator Ridged Pads","description":"The 10th Edition Terminator Series of shoulder pads are modified for the new larger prime terminators, but still hold the same design aesthetics as a classic indomitus-style armor. Sold unpainted, each pauldron has a custom designed, raised emblem and detail on them that makes painting easy and ensures a consistent, uniform appearance to your entire army.*\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \r\n\u003cbr\u003e\r\n\u003cbr\u003e\r\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":50660872978752,"sku":"20001211-4CRYSTAL","price":21.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":50660873011520,"sku":"20001211-4ARMOR","price":22.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-T10b-MakoJaws-L-1.png?v=1747670378"},{"product_id":"10x-mako-jaws-r-t-10b-indomitus-prime-pads","title":"10x Mako Jaws  (R) - 10th Ed. Terminator Ridged Pads","description":"The 10th Edition Terminator Series of shoulder pads are modified for the new larger prime terminators, but still hold the same design aesthetics as a classic indomitus-style armor. Sold unpainted, each pauldron has a custom designed, raised emblem and detail on them that makes painting easy and ensures a consistent, uniform appearance to your entire army.*\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \r\n\u003cbr\u003e\r\n\u003cbr\u003e\r\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":50660876747072,"sku":"20001210-4CRYSTAL","price":21.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":50660876779840,"sku":"20001210-4ARMOR","price":22.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-T10b-MakoJaws-R-1.png?v=1747670400"},{"product_id":"10x-mako-jaws-t-10a-indomitus-prime-pads","title":"10x Mako Jaws - 10th Ed. Terminator Prime Pads","description":"The 10th Edition Terminator Series of shoulder pads are modified for the new larger prime terminators, but still hold the same design aesthetics as a classic indomitus-style armor. Sold unpainted, each pauldron has a custom designed, raised emblem and detail on them that makes painting easy and ensures a consistent, uniform appearance to your entire army.*\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \r\n\u003cbr\u003e\r\n\u003cbr\u003e\r\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":50660913643840,"sku":"20001214-4CRYSTAL","price":20.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":50660913676608,"sku":"20001214-4ARMOR","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-T10a-MakoJaws-L-1.png?v=1747671932"},{"product_id":"10x-mako-jaws-r-t-10a-indomitus-prime-pads","title":"10x Mako Jaws  (R) - 10th Ed. Terminator Prime Pads","description":"The 10th Edition Terminator Series of shoulder pads are modified for the new larger prime terminators, but still hold the same design aesthetics as a classic indomitus-style armor. Sold unpainted, each pauldron has a custom designed, raised emblem and detail on them that makes painting easy and ensures a consistent, uniform appearance to your entire army.*\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \r\n\u003cbr\u003e\r\n\u003cbr\u003e\r\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":50660914004288,"sku":"20001215-4CRYSTAL","price":20.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":50660914037056,"sku":"20001215-4ARMOR","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-T10a-MakoJaws-R-1.png?v=1747671960"},{"product_id":"5x-markodon-jaws-t-3a-tartaros-shoulder-sets","title":"5x Markodon Jaws - 1st Ed. Tartaros Shoulder Sets","description":"\u003cp\u003eThe 1st Edition Tartaros Shoulder Sets were designed for use with the original plastic Tartaros-pattern Terminators and Thousand Sons Occult Terminators models. Each set includes both left and right shoulder pads. Our customers have found that they also fit other models with some minor conversion. Sold unpainted, each pauldron features a custom-designed, raised emblem and intricate details that make painting easier and help create a consistent, uniform look across your entire army.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":50661059821888,"sku":"20001216-4CRYSTAL","price":17.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":50661059854656,"sku":"20001216-4ARMOR","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-T3a-MakodonJaws-1c.png?v=1747677900"},{"product_id":"5x-great-shark-jaws-t-3a-tartaros-shoulder-sets","title":"5x Great Shark Jaws - 1st Ed. Tartaros Shoulder Sets","description":"\u003cp\u003eThe 1st Edition Tartaros Shoulder Sets were designed for use with the original plastic Tartaros-pattern Terminators and Thousand Sons Occult Terminators models. Each set includes both left and right shoulder pads. Our customers have found that they also fit other models with some minor conversion. Sold unpainted, each pauldron features a custom-designed, raised emblem and intricate details that make painting easier and help create a consistent, uniform look across your entire army.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":50661104943424,"sku":"20001217-4CRYSTAL","price":17.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":50661104976192,"sku":"20001217-4ARMOR","price":18.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-T3a-GreatSharkJaws-LR-1a.png?v=1747681213"},{"product_id":"10x-great-shark-jaw-t-10a-indomitus-prime-pads","title":"10x Great Shark Jaw - 10th Ed. Terminator Prime Pads","description":"The 10th Edition Terminator Series of shoulder pads are modified for the new larger prime terminators, but still hold the same design aesthetics as a classic indomitus-style armor. Sold unpainted, each pauldron has a custom designed, raised emblem and detail on them that makes painting easy and ensures a consistent, uniform appearance to your entire army.*\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \r\n\u003cbr\u003e\r\n\u003cbr\u003e\r\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":50661122474304,"sku":"20001218-4CRYSTAL","price":20.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":50661122507072,"sku":"20001218-4ARMOR","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-T10a-GreatSharkJaw-1a.png?v=1747682311"},{"product_id":"10x-great-shark-jaw-t-10b-indomitus-prime-pads","title":"10x Great Shark Jaw - 10th Ed. Terminator Ridged Pads","description":"The 10th Edition Terminator Series of shoulder pads are modified for the new larger prime terminators, but still hold the same design aesthetics as a classic indomitus-style armor. Sold unpainted, each pauldron has a custom designed, raised emblem and detail on them that makes painting easy and ensures a consistent, uniform appearance to your entire army.*\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \r\n\u003cbr\u003e\r\n\u003cbr\u003e\r\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":50661130666304,"sku":"20001219-4CRYSTAL","price":21.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":50661130699072,"sku":"20001219-4ARMOR","price":22.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-T10b-GreatSharkJaw-1a.png?v=1747682554"},{"product_id":"1x-megalodon-jaw","title":"1x Megalodon Jaw","description":"\u003cp\u003e\u003cstrong\u003eYou're going to need a bigger boat for these Jaws! \u003c\/strong\u003eUse this large shark jaws on your knights, titans, vehicle models \u003cmeta charset=\"utf-8\"\u003eor scenery pieces. Sold unpainted, this product makes it possible to add it to models you’ve already painted. Simply prime, paint and super glue to ensure a clean look.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3 \/ 25 mm (1 inch)","offer_id":50661319868736,"sku":"20001228-4MR","price":10.5,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3 \/ 30 mm (1-1\/4 inches)","offer_id":50661263016256,"sku":"20001229-4MR","price":11.5,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3 \/ 40 mm (1-1\/2 inches)","offer_id":50661263049024,"sku":"20001230-4MR","price":12.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 25 mm (1 inch)","offer_id":50661319901504,"sku":"20001225-4CRYSTAL","price":12.0,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 30 mm (1-1\/4 inches)","offer_id":50661263180096,"sku":"20001226-4CRYSTAL","price":13.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 40 mm (1-1\/2 inches)","offer_id":50661263212864,"sku":"20001227-4CRYSTAL","price":15.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 25 mm (1 inch)","offer_id":50661319934272,"sku":"20001225-4ARMOR","price":13.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 30 mm (1-1\/4 inches)","offer_id":50661263278400,"sku":"20001226-4ARMOR","price":14.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 40 mm (1-1\/2 inches)","offer_id":50661263311168,"sku":"20001227-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-MegalodonJaw-1a.png?v=1747692624"},{"product_id":"10x-shark-tooth-g-11a-shoulder-pads","title":"10x Shark Tooth - G:11a Shoulder Pads","description":"\u003cp\u003eThe Generation 11 shoulder pad styles draw inspiration from the Mark X: Tacticus armor worn by the standard Primaris Marines. Customers generally find these pads compatible with most 28mm scale marine models; however, they look best on Tacticus armored models, such as Intercessors, Assault Intercessors, Hellblasters and Desolation Squads. Each pauldron is sold unpainted and features custom-designed raised emblems, details, and patterns that make painting easier and help create a consistent, uniform look across your army.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003eA Digital File\u003c\/span\u003e\u003c\/strong\u003e can be selected as a choice under the Materials Options dropdown. If you have your own 3D printer and the tools needed to prepare and support them, this can be a great option. Please be aware these files are unsupported and in a STL file format, which is native to most any stereolithography\/CAD software. \u003cstrong\u003eBy purchasing these digital files, you are agreeing to all of the terms and conditions listed below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLEGAL DISCLAIMER for STL PURCHASE: \u003c\/strong\u003eThe rights granted to you through the purchase of our digital assets are for non-commercial\/ PERSONAL USE ONLY. Any reproductions of these files not for your own use is prohibited. You may not lawfully copy, trade and\/or resell these digital files or resell any printed reproductions of them in any way. The STL files may not be modified or altered to bypass these rights.\u003c\/p\u003e\n\u003cp\u003eFurthermore, we are not responsible for any misprints or offer technical support to assist with your printing process. These are the same elements of the files we use for our own production process, so if we discover a defect or issue with the file itself, we will fix the file and an updated file will be sent to you automatically.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":52128547111232,"sku":"20002878-4CRYSTAL","price":16.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":52128547144000,"sku":"20002878-4ARMOR","price":17.0,"currency_code":"USD","in_stock":true},{"title":"Digital File (Personal Use Only)","offer_id":52128547176768,"sku":"g11a-SharkTooth.stl","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-g11a-SharkTooth-1.png?v=1781634519"},{"product_id":"10x-retiarian-spears-g-11a-shoulder-pads","title":"10x Trident - G:11a Shoulder Pads","description":"\u003cp\u003eThe Generation 11 shoulder pad styles draw inspiration from the Mark X: Tacticus armor worn by the standard Primaris Marines. Customers generally find these pads compatible with most 28mm scale marine models; however, they look best on Tacticus armored models, such as Intercessors, Assault Intercessors, Hellblasters and Desolation Squads. Each pauldron is sold unpainted and features custom-designed raised emblems, details, and patterns that make painting easier and help create a consistent, uniform look across your army.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003eA Digital File\u003c\/span\u003e\u003c\/strong\u003e can be selected as a choice under the Materials Options dropdown. If you have your own 3D printer and the tools needed to prepare and support them, this can be a great option. Please be aware these files are unsupported and in a STL file format, which is native to most any stereolithography\/CAD software. \u003cstrong\u003eBy purchasing these digital files, you are agreeing to all of the terms and conditions listed below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLEGAL DISCLAIMER for STL PURCHASE: \u003c\/strong\u003eThe rights granted to you through the purchase of our digital assets are for non-commercial\/ PERSONAL USE ONLY. Any reproductions of these files not for your own use is prohibited. You may not lawfully copy, trade and\/or resell these digital files or resell any printed reproductions of them in any way. The STL files may not be modified or altered to bypass these rights.\u003c\/p\u003e\n\u003cp\u003eFurthermore, we are not responsible for any misprints or offer technical support to assist with your printing process. These are the same elements of the files we use for our own production process, so if we discover a defect or issue with the file itself, we will fix the file and an updated file will be sent to you automatically.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":52128605176128,"sku":"20002879-4CRYSTAL","price":16.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":52128605208896,"sku":"20002879-4ARMOR","price":17.0,"currency_code":"USD","in_stock":true},{"title":"Digital File (Personal Use Only)","offer_id":52128605241664,"sku":"g11a-Trident.stl","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-g11a-RetiarianSpears-1_668e24fe-8dd8-438d-b85d-677e899729a5.png?v=1781636814"},{"product_id":"10x-shark-tooth-g-4a-shoulder-pads","title":"10x Shark Tooth - G:4a Shoulder Pads","description":"\u003cp\u003eThe Generation 4 styles of shoulder pads are inspired by the Mark IV: Imperial Maximus armor. Our customers find these pads compatible with most new and classic 28mm scale marine models. Sold unpainted, each pauldron features custom-designed raised emblems, details, and patterns that simplify the painting process, ensuring a consistent and uniform appearance for your entire army.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003e\u003cstrong\u003eA Digital File\u003c\/strong\u003e\u003c\/span\u003e can be selected as a choice under the Materials Options dropdown. If you have your own 3D printer and the tools needed to prepare and support them, this can be a great option. Please be aware these files are unsupported and in a STL file format, which is native to most any stereolithography\/CAD software. \u003cstrong\u003eBy purchasing these digital files, you are agreeing to all of the terms and conditions listed below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLEGAL DISCLAIMER for STL PURCHASE:\u003c\/strong\u003e The rights granted to you through the purchase of our digital assets are for non-commercial\/ PERSONAL USE ONLY. Any reproductions of these files not for your own use is prohibited. You may not lawfully copy, trade and\/or resell these digital files or resell any printed reproductions of them in any way. The STL files may not be modified or altered to bypass these rights.\u003c\/p\u003e\n\u003cp\u003eFurthermore, we are not responsible for any misprints or offer technical support to assist with your printing process. These are the same elements of the files we use for our own production process, so if we discover a defect or issue with the file itself, we will fix the file and an updated file will be sent to you automatically.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":52737325793600,"sku":"20002965-4CRYSTAL","price":16.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":52737325826368,"sku":"20002965-4ARMOR","price":17.0,"currency_code":"USD","in_stock":true},{"title":"Digital File (Personal Use Only)","offer_id":52737358102848,"sku":"g4a-SharkTooth.stl","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-g4a-SharkTooth-1.png?v=1783278055"},{"product_id":"10x-shark-tooth-g-10-right-shoulder-pads","title":"10x Shark Tooth - G:10 Right Shoulder Pads","description":"\u003cp\u003ePhobos-pattern armor, including Reivers, Incursors, Infiltrators, and similar units, is known for its asymmetric shoulder design. Most kits only include left shoulder pads, while the right shoulder is molded into the arm piece.*\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThese pads are made specifically for that right shoulder, \u003c\/strong\u003eso they are thinner than my other pads, including the standard G:10 left-side shoulder pads. Because of this, they may look unusual or not fit correctly on other Space Marine models—or even on the left shoulder of the same Phobos model.\u003c\/p\u003e\n\u003cp\u003eEach pad is sold unpainted and features custom raised emblems, details, and patterns that make painting easier while helping you maintain a clean, uniform look across your army.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":52737326711104,"sku":"20002966-4CRYSTAL","price":16.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":52737326743872,"sku":"20002966-4ARMOR","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-g10R-SharkTooth-1.png?v=1783278518"},{"product_id":"10x-shark-tooth-g-13-ferrous-shoulder-pads","title":"10x Shark Tooth - G:13 Ferrous Shoulder Pads","description":"\u003cp\u003eGeneration 13 shoulder pad styles draw inspiration from the Mark X: Gravis Armor used by those more heavily armored Primaris Marines. These larger shoulder pads are not suitable for standard 28mm scale marine models but are ideal for Gravis armored units such as Aggressors, Eradicators, Heavy Intercessors, Inceptors, and various special characters. Each pauldron is sold unpainted and features custom raised emblems, details, and patterns to make painting easier and help maintain a uniform army appearance.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003e\u003cstrong\u003e\u003cbr\u003eA Digital File\u003c\/strong\u003e\u003c\/span\u003e can be selected as a choice under the Materials Options dropdown. If you have your own 3D printer and the tools needed to prepare and support them, this can be a great option. Please be aware these files are unsupported and in a STL file format, which is native to most any stereolithography\/CAD software. \u003cstrong\u003eBy purchasing these digital files, you are agreeing to all of the terms and conditions listed below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLEGAL DISCLAIMER for STL PURCHASE:\u003c\/strong\u003e The rights granted to you through the purchase of our digital assets are for non-commercial\/ PERSONAL USE ONLY. Any reproductions of these files not for your own use is prohibited. You may not lawfully copy, trade and\/or resell these digital files or resell any printed reproductions of them in any way. The STL files may not be modified or altered to bypass these rights.\u003c\/p\u003e\n\u003cp\u003eFurthermore, we are not responsible for any misprints or offer technical support to assist with your printing process. These are the same elements of the files we use for our own production process, so if we discover a defect or issue with the file itself, we will fix the file and an updated file will be sent to you automatically.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":52737327563072,"sku":"20002967-4CRYSTAL","price":18.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":52737327595840,"sku":"20002967-4ARMOR","price":19.0,"currency_code":"USD","in_stock":true},{"title":"Digital File (Personal Use Only)","offer_id":52737365573952,"sku":"g13-SharkTooth.stl","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-g13a-SharkTooth-1.png?v=1783277688"},{"product_id":"10x-leviathan-maw-10th-ed-terminator-prime-pads","title":"10x Leviathan Maw - 10th Ed. Terminator Prime Pads","description":"\u003cp\u003eThe 10th Edition Terminator Series of shoulder pads are modified for the new larger prime terminators, but still hold the same design aesthetics as a classic indomitus-style armor. Sold unpainted, each pauldron has a custom designed, raised emblem and detail on them that makes painting easy and ensures a consistent, uniform appearance to your entire army.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003eA Digital File\u003c\/span\u003e\u003c\/strong\u003e can be selected as a choice under the Materials Options dropdown. If you have your own 3D printer and the tools needed to prepare and support them, this can be a great option. Please be aware these files are unsupported and in a STL file format, which is native to most any stereolithography\/CAD software. \u003cstrong\u003eBy purchasing these digital files, you are agreeing to all of the terms and conditions listed below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLEGAL DISCLAIMER for STL PURCHASE: \u003c\/strong\u003eThe rights granted to you through the purchase of our digital assets are for non-commercial\/ PERSONAL USE ONLY. Any reproductions of these files not for your own use is prohibited. You may not lawfully copy, trade and\/or resell these digital files or resell any printed reproductions of them in any way. The STL files may not be modified or altered to bypass these rights.\u003c\/p\u003e\n\u003cp\u003eFurthermore, we are not responsible for any misprints or offer technical support to assist with your printing process. These are the same elements of the files we use for our own production process, so if we discover a defect or issue with the file itself, we will fix the file and an updated file will be sent to you automatically.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":52737381335360,"sku":"20002969-4CRYSTAL","price":18.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":52737381368128,"sku":"20002969-4ARMOR","price":19.5,"currency_code":"USD","in_stock":true},{"title":"Digital File (Personal Use Only)","offer_id":52737385070912,"sku":"T10a_LeviathanMawstl","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-T10a_LeviathanMaw.png?v=1783279999"},{"product_id":"10x-leviathan-maw-10th-ed-terminator-ridged-pads","title":"10x Leviathan Maw - 10th Ed. Terminator Ridged Pads","description":"\u003cp\u003eThe 10th Edition Terminator Series of shoulder pads are modified for the new larger prime terminators, but still hold the same design aesthetics as a classic indomitus-style armor. Sold unpainted, each pauldron has a custom designed, raised emblem and detail on them that makes painting easy and ensures a consistent, uniform appearance to your entire army.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003e\u003cbr\u003eA Digital File\u003c\/span\u003e\u003c\/strong\u003e can be selected as a choice under the Materials Options dropdown. If you have your own 3D printer and the tools needed to prepare and support them, this can be a great option. Please be aware these files are unsupported and in a STL file format, which is native to most any stereolithography\/CAD software. \u003cstrong\u003eBy purchasing these digital files, you are agreeing to all of the terms and conditions listed below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLEGAL DISCLAIMER for STL PURCHASE: \u003c\/strong\u003eThe rights granted to you through the purchase of our digital assets are for non-commercial\/ PERSONAL USE ONLY. Any reproductions of these files not for your own use is prohibited. You may not lawfully copy, trade and\/or resell these digital files or resell any printed reproductions of them in any way. The STL files may not be modified or altered to bypass these rights.\u003c\/p\u003e\n\u003cp\u003eFurthermore, we are not responsible for any misprints or offer technical support to assist with your printing process. These are the same elements of the files we use for our own production process, so if we discover a defect or issue with the file itself, we will fix the file and an updated file will be sent to you automatically.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":52737382351168,"sku":"20002968-4CRYSTAL","price":19.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":52737382383936,"sku":"20002968-4ARMOR","price":21.0,"currency_code":"USD","in_stock":true},{"title":"Digital File (Personal Use Only)","offer_id":52737384841536,"sku":"T10b_LeviathanMaw.stl","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-T10b_LeviathanMaw.png?v=1783279729"},{"product_id":"10x-leviathan-wardens-g-4a-shoulder-pads","title":"10x Leviathan Wardens - G:4a Shoulder Pads","description":"\u003cp\u003eThe Generation 4 styles of shoulder pads are inspired by the Mark IV: Imperial Maximus armor. Our customers find these pads compatible with most new and classic 28mm scale marine models. Sold unpainted, each pauldron features custom-designed raised emblems, details, and patterns that simplify the painting process, ensuring a consistent and uniform appearance for your entire army.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003e\u003cstrong\u003eA Digital File\u003c\/strong\u003e\u003c\/span\u003e can be selected as a choice under the Materials Options dropdown. If you have your own 3D printer and the tools needed to prepare and support them, this can be a great option. Please be aware these files are unsupported and in a STL file format, which is native to most any stereolithography\/CAD software. \u003cstrong\u003eBy purchasing these digital files, you are agreeing to all of the terms and conditions listed below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLEGAL DISCLAIMER for STL PURCHASE: \u003c\/strong\u003eThe rights granted to you through the purchase of our digital assets are for non-commercial\/ PERSONAL USE ONLY. Any reproductions of these files not for your own use is prohibited. You may not lawfully copy, trade and\/or resell these digital files or resell any printed reproductions of them in any way. The STL files may not be modified or altered to bypass these rights.\u003c\/p\u003e\n\u003cp\u003eFurthermore, we are not responsible for any misprints or offer technical support to assist with your printing process. These are the same elements of the files we use for our own production process, so if we discover a defect or issue with the file itself, we will fix the file and an updated file will be sent to you automatically.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":52737401291072,"sku":"20002970-4CRYSTAL","price":16.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":52737401323840,"sku":"20002970-4ARMOR","price":17.0,"currency_code":"USD","in_stock":true},{"title":"Digital File (Personal Use Only)","offer_id":52737742340416,"sku":"g4a_LeviathonWarden.stl","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-g4a_LeviathonWarden.png?v=1783280776"},{"product_id":"10x-leviathan-wardens-g-10a-shoulder-pads","title":"10x Leviathan Wardens - G:10a Shoulder Pads","description":"\u003cp\u003eThe Generation 10 shoulder pad styles draw inspiration from the Mark X: Phobos armor worn by the vanguard of the Primaris Marines. Customers generally find these pads compatible with most 28mm scale marine models; however, they look best on Phobos armored models, such as Reivers, Incursors, Infiltrators, and Eliminators. Each pauldron is sold unpainted and features custom-designed raised emblems, details, and patterns that make painting easier and help create a consistent, uniform look across your army.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003e\u003cstrong\u003eA Digital File\u003c\/strong\u003e\u003c\/span\u003e can be selected as a choice under the Materials Options dropdown. If you have your own 3D printer and the tools needed to prepare and support them, this can be a great option. Please be aware these files are unsupported and in a STL file format, which is native to most any stereolithography\/CAD software. \u003cstrong\u003eBy purchasing these digital files, you are agreeing to all of the terms and conditions listed below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLEGAL DISCLAIMER for STL PURCHASE:\u003c\/strong\u003e The rights granted to you through the purchase of our digital assets are for non-commercial\/ PERSONAL USE ONLY. Any reproductions of these files not for your own use is prohibited. You may not lawfully copy, trade and\/or resell these digital files or resell any printed reproductions of them in any way. The STL files may not be modified or altered to bypass these rights.\u003c\/p\u003e\n\u003cp\u003eFurthermore, we are not responsible for any misprints or offer technical support to assist with your printing process. These are the same elements of the files we use for our own production process, so if we discover a defect or issue with the file itself, we will fix the file and an updated file will be sent to you automatically.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":52737401520448,"sku":"20002971-4CRYSTAL","price":16.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":52737401553216,"sku":"20002971-4ARMOR","price":17.0,"currency_code":"USD","in_stock":true},{"title":"Digital File (Personal Use Only)","offer_id":52737746633024,"sku":"g10a_LeviathonWarden.stl","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-g10a_LeviathonWarden.png?v=1783281104"},{"product_id":"10x-leviathan-wardens-g-11a-shoulder-pads","title":"10x Leviathan Wardens - G:11a Shoulder Pads","description":"\u003cp\u003eThe Generation 11 shoulder pad styles draw inspiration from the Mark X: Tacticus armor worn by the standard Primaris Marines. Customers generally find these pads compatible with most 28mm scale marine models; however, they look best on Tacticus armored models, such as Intercessors, Assault Intercessors, Hellblasters and Desolation Squads. Each pauldron is sold unpainted and features custom-designed raised emblems, details, and patterns that make painting easier and help create a consistent, uniform look across your army.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003eA Digital File\u003c\/span\u003e\u003c\/strong\u003e can be selected as a choice under the Materials Options dropdown. If you have your own 3D printer and the tools needed to prepare and support them, this can be a great option. Please be aware these files are unsupported and in a STL file format, which is native to most any stereolithography\/CAD software. \u003cstrong\u003eBy purchasing these digital files, you are agreeing to all of the terms and conditions listed below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLEGAL DISCLAIMER for STL PURCHASE: \u003c\/strong\u003eThe rights granted to you through the purchase of our digital assets are for non-commercial\/ PERSONAL USE ONLY. Any reproductions of these files not for your own use is prohibited. You may not lawfully copy, trade and\/or resell these digital files or resell any printed reproductions of them in any way. The STL files may not be modified or altered to bypass these rights.\u003c\/p\u003e\n\u003cp\u003eFurthermore, we are not responsible for any misprints or offer technical support to assist with your printing process. These are the same elements of the files we use for our own production process, so if we discover a defect or issue with the file itself, we will fix the file and an updated file will be sent to you automatically.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":52737401585984,"sku":"20002972-4CRYSTAL","price":16.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":52737401618752,"sku":"20002972-4ARMOR","price":17.0,"currency_code":"USD","in_stock":true},{"title":"Digital File (Personal Use Only)","offer_id":52737401651520,"sku":"g11a_LeviathonWarden.stl","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-g11a-LeviathanWardens-1.png?v=1783281328"},{"product_id":"10x-leviathan-wardens-g-13a-shoulder-pads","title":"10x Leviathan Wardens - G:13a Shoulder Pads","description":"\u003cp\u003eGeneration 13 shoulder pad styles draw inspiration from the Mark X: Gravis Armor used by those more heavily armored Primaris Marines. These larger shoulder pads are not suitable for standard 28mm scale marine models but are ideal for Gravis armored units such as Aggressors, Eradicators, Heavy Intercessors, Inceptors, and various special characters. Each pauldron is sold unpainted and features custom raised emblems, details, and patterns to make painting easier and help maintain a uniform army appearance.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003e\u003cstrong\u003e\u003cbr\u003eA Digital File\u003c\/strong\u003e\u003c\/span\u003e can be selected as a choice under the Materials Options dropdown. If you have your own 3D printer and the tools needed to prepare and support them, this can be a great option. Please be aware these files are unsupported and in a STL file format, which is native to most any stereolithography\/CAD software. \u003cstrong\u003eBy purchasing these digital files, you are agreeing to all of the terms and conditions listed below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLEGAL DISCLAIMER for STL PURCHASE:\u003c\/strong\u003e The rights granted to you through the purchase of our digital assets are for non-commercial\/ PERSONAL USE ONLY. Any reproductions of these files not for your own use is prohibited. You may not lawfully copy, trade and\/or resell these digital files or resell any printed reproductions of them in any way. The STL files may not be modified or altered to bypass these rights.\u003c\/p\u003e\n\u003cp\u003eFurthermore, we are not responsible for any misprints or offer technical support to assist with your printing process. These are the same elements of the files we use for our own production process, so if we discover a defect or issue with the file itself, we will fix the file and an updated file will be sent to you automatically.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":52737402175808,"sku":"20002973-4CRYSTAL","price":18.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":52737402208576,"sku":"20002973-4ARMOR","price":19.0,"currency_code":"USD","in_stock":true},{"title":"Digital File (Personal Use Only)","offer_id":52737767604544,"sku":"g13a_LeviathonWarden.stl","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-g13a_LeviathonWarden.png?v=1783280602"},{"product_id":"10x-leviathan-wardens-10th-ed-terminator-prime-pads","title":"10x Leviathan Wardens - 10th Ed. Terminator Prime Pads","description":"\u003cp\u003eThe 10th Edition Terminator Series of shoulder pads are modified for the new larger prime terminators, but still hold the same design aesthetics as a classic indomitus-style armor. Sold unpainted, each pauldron has a custom designed, raised emblem and detail on them that makes painting easy and ensures a consistent, uniform appearance to your entire army.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003e\u003cstrong\u003eA Digital File\u003c\/strong\u003e\u003c\/span\u003e can be selected as a choice under the Materials Options dropdown. If you have your own 3D printer and the tools needed to prepare and support them, this can be a great option. Please be aware these files are unsupported and in a STL file format, which is native to most any stereolithography\/CAD software. \u003cstrong\u003eBy purchasing these digital files, you are agreeing to all of the terms and conditions listed below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLEGAL DISCLAIMER for STL PURCHASE:\u003c\/strong\u003e The rights granted to you through the purchase of our digital assets are for non-commercial\/ PERSONAL USE ONLY. Any reproductions of these files not for your own use is prohibited. You may not lawfully copy, trade and\/or resell these digital files or resell any printed reproductions of them in any way. The STL files may not be modified or altered to bypass these rights.\u003c\/p\u003e\n\u003cp\u003eFurthermore, we are not responsible for any misprints or offer technical support to assist with your printing process. These are the same elements of the files we use for our own production process, so if we discover a defect or issue with the file itself, we will fix the file and an updated file will be sent to you automatically.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":52737402241344,"sku":"20002974-4CRYSTAL","price":18.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":52737402274112,"sku":"20002974-4ARMOR","price":19.5,"currency_code":"USD","in_stock":true},{"title":"Digital File (Personal Use Only)","offer_id":52737784054080,"sku":"T10a_LeviathonWarden-L.stl","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-T10a_LeviathonWarden-L.png?v=1783281809"},{"product_id":"10x-leviathan-wardens-10th-ed-terminator-ridged-pads","title":"10x Leviathan Wardens - 10th Ed. Terminator Ridged Pads","description":"\u003cp\u003eThe 10th Edition Terminator Series of shoulder pads are modified for the new larger prime terminators, but still hold the same design aesthetics as a classic indomitus-style armor. Sold unpainted, each pauldron has a custom designed, raised emblem and detail on them that makes painting easy and ensures a consistent, uniform appearance to your entire army.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003e\u003cstrong\u003eA Digital File\u003c\/strong\u003e\u003c\/span\u003e can be selected as a choice under the Materials Options dropdown. If you have your own 3D printer and the tools needed to prepare and support them, this can be a great option. Please be aware these files are unsupported and in a STL file format, which is native to most any stereolithography\/CAD software. \u003cstrong\u003eBy purchasing these digital files, you are agreeing to all of the terms and conditions listed below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLEGAL DISCLAIMER for STL PURCHASE: \u003c\/strong\u003eThe rights granted to you through the purchase of our digital assets are for non-commercial\/ PERSONAL USE ONLY. Any reproductions of these files not for your own use is prohibited. You may not lawfully copy, trade and\/or resell these digital files or resell any printed reproductions of them in any way. The STL files may not be modified or altered to bypass these rights.\u003c\/p\u003e\n\u003cp\u003eFurthermore, we are not responsible for any misprints or offer technical support to assist with your printing process. These are the same elements of the files we use for our own production process, so if we discover a defect or issue with the file itself, we will fix the file and an updated file will be sent to you automatically.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":52737402601792,"sku":"20002976-4CRYSTAL","price":19.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":52737402634560,"sku":"20002976-4ARMOR","price":21.0,"currency_code":"USD","in_stock":true},{"title":"Digital File (Personal Use Only)","offer_id":52737832059200,"sku":"T10b_LeviathonWarden-L.stl","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-T10b_LeviathonWarden-L.png?v=1783282445"},{"product_id":"10x-leviathan-wardens-r-10th-ed-terminator-prime-pads","title":"10x Leviathan Wardens (R) - 10th Ed. Terminator Prime Pads","description":"\u003cp\u003eThe 10th Edition Terminator Series of shoulder pads are modified for the new larger prime terminators, but still hold the same design aesthetics as a classic indomitus-style armor. Sold unpainted, each pauldron has a custom designed, raised emblem and detail on them that makes painting easy and ensures a consistent, uniform appearance to your entire army.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003e\u003cstrong\u003eA Digital File\u003c\/strong\u003e\u003c\/span\u003e can be selected as a choice under the Materials Options dropdown. If you have your own 3D printer and the tools needed to prepare and support them, this can be a great option. Please be aware these files are unsupported and in a STL file format, which is native to most any stereolithography\/CAD software. \u003cstrong\u003eBy purchasing these digital files, you are agreeing to all of the terms and conditions listed below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLEGAL DISCLAIMER for STL PURCHASE:\u003c\/strong\u003e The rights granted to you through the purchase of our digital assets are for non-commercial\/ PERSONAL USE ONLY. Any reproductions of these files not for your own use is prohibited. You may not lawfully copy, trade and\/or resell these digital files or resell any printed reproductions of them in any way. The STL files may not be modified or altered to bypass these rights.\u003c\/p\u003e\n\u003cp\u003eFurthermore, we are not responsible for any misprints or offer technical support to assist with your printing process. These are the same elements of the files we use for our own production process, so if we discover a defect or issue with the file itself, we will fix the file and an updated file will be sent to you automatically.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":52737790771520,"sku":"20002975-4CRYSTAL","price":18.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":52737790804288,"sku":"20002975-4ARMOR","price":19.5,"currency_code":"USD","in_stock":true},{"title":"Digital File (Personal Use Only)","offer_id":52737790837056,"sku":"T10a_LeviathonWarden-R.stl","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-T10a_LeviathonWarden-R.png?v=1783282182"},{"product_id":"10x-leviathan-wardens-r-10th-ed-terminator-ridged-pads","title":"10x Leviathan Wardens (R) - 10th Ed. Terminator Ridged Pads","description":"\u003cp\u003eThe 10th Edition Terminator Series of shoulder pads are modified for the new larger prime terminators, but still hold the same design aesthetics as a classic indomitus-style armor. Sold unpainted, each pauldron has a custom designed, raised emblem and detail on them that makes painting easy and ensures a consistent, uniform appearance to your entire army.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003e\u003cstrong\u003eA Digital File\u003c\/strong\u003e\u003c\/span\u003e can be selected as a choice under the Materials Options dropdown. If you have your own 3D printer and the tools needed to prepare and support them, this can be a great option. Please be aware these files are unsupported and in a STL file format, which is native to most any stereolithography\/CAD software. \u003cstrong\u003eBy purchasing these digital files, you are agreeing to all of the terms and conditions listed below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLEGAL DISCLAIMER for STL PURCHASE: \u003c\/strong\u003eThe rights granted to you through the purchase of our digital assets are for non-commercial\/ PERSONAL USE ONLY. Any reproductions of these files not for your own use is prohibited. You may not lawfully copy, trade and\/or resell these digital files or resell any printed reproductions of them in any way. The STL files may not be modified or altered to bypass these rights.\u003c\/p\u003e\n\u003cp\u003eFurthermore, we are not responsible for any misprints or offer technical support to assist with your printing process. These are the same elements of the files we use for our own production process, so if we discover a defect or issue with the file itself, we will fix the file and an updated file will be sent to you automatically.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":52737871380800,"sku":"20002977-4CRYSTAL","price":19.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":52737871413568,"sku":"20002977-4ARMOR","price":21.0,"currency_code":"USD","in_stock":true},{"title":"Digital File (Personal Use Only)","offer_id":52737871446336,"sku":"T10b_LeviathonWarden-R.stl","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-T10b_LeviathonWarden-R.png?v=1783282737"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/collections\/Coll-LeviathanWardens.png?v=1783458442","url":"https:\/\/popgoesthemonkey.com\/collections\/leviathan-wardens\/armor_-accessories.oembed","provider":"Pop Goes the Monkey","version":"1.0","type":"link"}