{"title":"Storm Wolves","description":"","products":[{"product_id":"11x-power-hammer-mjor","title":"11x Power Hammer: Mjor","description":"This set of weapons incorporates \u003cem\u003e5 right hands\u003c\/em\u003e and \u003cem\u003e5 left hands\u003c\/em\u003e in a variety of grips to insure a unique look for each warrior. It also includes 1 weapon without a hand. These are sold unpainted, with raised emblem and detail on them that makes painting easy and ensures a consistent, uniform appearance to your entire army. These should fit both the new and classic 28mm scale, space marine or chaos marine models.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395677069632,"sku":"7665507-4CRYSTAL","price":27.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395677102400,"sku":"7665507-4ARMOR","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_23548149_13007650_1686938376_1_0_76b33b24-6a92-408d-9542-30985909aab5.jpg?v=1693504088"},{"product_id":"60x-wolf-paw-shoulder-insignia-pack","title":"60x Wolf Paw - Shoulder Insignia pack","description":"This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or mono-pose sculpts. They are intended to personalize your army by providing a raised emblem that makes painting easier and helps create a consistent, uniform look. As an additional benefit, this product allows you to add your favorite insignia to models you’ve already painted. Simply prime, paint, and glue (Super Glue) to achieve a clean appearance.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395665633600,"sku":"7994319-4CRYSTAL","price":25.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395665666368,"sku":"7994319-4ARMOR","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_24496937_13421701_1686938387_1_0_bc744b72-7ab7-4b3f-b225-bb6beea410ca.jpg?v=1693503101"},{"product_id":"60x-storm-wolf-shoulder-insignia-pack","title":"60x Storm Wolf - Shoulder Insignia pack","description":"This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or mono-pose sculpts. They are intended to personalize your army by providing a raised emblem that makes painting easier and helps create a consistent, uniform look. As an additional benefit, this product allows you to add your favorite insignia to models you’ve already painted. Simply prime, paint, and glue (Super Glue) to achieve a clean appearance.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395665568064,"sku":"7994322-4CRYSTAL","price":25.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395665600832,"sku":"7994322-4ARMOR","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_24497223_13421796_1686938387_1_0_50902372-e152-48d1-b451-a5f43c0caaa9.jpg?v=1693503090"},{"product_id":"60x-long-paw-shoulder-insignia-pack","title":"60x Long Paw - Shoulder Insignia pack","description":"This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or mono-pose sculpts. They are intended to personalize your army by providing a raised emblem that makes painting easier and helps create a consistent, uniform look. As an additional benefit, this product allows you to add your favorite insignia to models you’ve already painted. Simply prime, paint, and glue (Super Glue) to achieve a clean appearance.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395665469760,"sku":"7994323-4CRYSTAL","price":25.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395665502528,"sku":"7994323-4ARMOR","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_24497390_13421922_1686938387_1_0_0e713178-1f3a-46e3-b60b-5886c51bdbbf.jpg?v=1693503081"},{"product_id":"60x-fanged-skull-shoulder-insignia-pack","title":"60x Fanged Skull - Shoulder Insignia pack","description":"This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or mono-pose sculpts. They are intended to personalize your army by providing a raised emblem that makes painting easier and helps create a consistent, uniform look. As an additional benefit, this product allows you to add your favorite insignia to models you’ve already painted. Simply prime, paint, and glue (Super Glue) to achieve a clean appearance.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395665371456,"sku":"7994325-4CRYSTAL","price":25.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395665404224,"sku":"7994325-4ARMOR","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_24500158_13423155_1686938387_1_0_7c6d1c8b-22c5-4192-b2a4-707942db40e0.jpg?v=1693503073"},{"product_id":"60x-wolf-skull-shoulder-insignia-pack","title":"60x Wolf Skull : Shoulder Insignia pack","description":"This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or mono-pose sculpts. They are intended to personalize your army by providing a raised emblem that makes painting easier and helps create a consistent, uniform look. As an additional benefit, this product allows you to add your favorite insignia to models you’ve already painted. Simply prime, paint, and glue (Super Glue) to achieve a clean appearance.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395665305920,"sku":"7995231-4CRYSTAL","price":25.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395665338688,"sku":"7995231-4ARMOR","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_24500313_13423201_1686938387_1_0_9c6ae36f-f577-41f2-b4ce-b43d25eff5db.jpg?v=1693503063"},{"product_id":"60x-wolf-raiders-shoulder-insignia-pack","title":"60x Wolf Raiders - Shoulder Insignia pack","description":"This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or mono-pose sculpts. They are intended to personalize your army by providing a raised emblem that makes painting easier and helps create a consistent, uniform look. As an additional benefit, this product allows you to add your favorite insignia to models you’ve already painted. Simply prime, paint, and glue (Super Glue) to achieve a clean appearance.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395665240384,"sku":"M7995233-4CRYSTAL","price":25.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395665273152,"sku":"M7995233-4ARMOR","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_24500463_13423241_1686938387_1_0_a988bcd3-9a95-4d53-b4a5-ab4a2a0e0d75.jpg?v=1693503053"},{"product_id":"blood-claw-gryphus-jetpacks-pm","title":"Blood Claw - Gryphus Jetpacks (PM)","description":"\u003cp\u003e\u003cstrong\u003eThe Gryphus Jetpack (PM)\u003c\/strong\u003e is a custom designed Jetpacks that is meant to replace the backpacks of the new “Prime” marine models to turn it into an assault trooper. Styled like the classic jump pack they will give your troops a unique profile on the tabletop. They are sold unpainted but, incorporates raised emblems and details to make painting easier and ensures a consistent and uniform appearance for your army.*\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3 \/ 5 Jetpacks","offer_id":50297808355648,"sku":"20000238-4MR3","price":18.5,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3 \/ 10 Jetpacks","offer_id":50297808388416,"sku":"20000239-4MR3","price":28.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 5 Jetpacks","offer_id":49395662979392,"sku":"8026160-4CRYSTAL","price":33.75,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ Just 1","offer_id":49395662946624,"sku":"9565297-4CRYSTAL","price":15.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 5 Jetpacks","offer_id":49395663044928,"sku":"8026160-4ARMOR","price":38.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Just 1","offer_id":49395663012160,"sku":"9565297-4ARMOR","price":15.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_24586796_13462650_1686938390_1_0.jpg?v=1693502728"},{"product_id":"smash-captain-kit-slothower-pm","title":"Smash Captain Kit: Slothower (PM)","description":"Are you looking for a New \"Prime\" Marine (PM) Captain with a Jet Pack, a Big Hammer, and a Bad Ass Shield? …Well then this kit is just what you're looking for.\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan style=\"font-size:14px\"\u003eThis kit was inspired by one of my best friends; Luke Slothower form \u003ca href=\"https:\/\/www.facebook.com\/skywalkerpainting\/?fb_dtsg_ag=Ady1Rsvdcydbp_g0geBucxwBK0YBot-LNRsgIo2Sy8bD9A%3AAdwWzc_x-uHho9eHrVs-qEIdREW6xEc3SzxUfoF47Y5Ulw\" rel=\"nofollow\"\u003e@SkywalkerPainting\u003c\/a\u003e . It was his first Space Wolf army back in the late 90's that got me into the 40k in the first place. I know I will never be as good of a painter as he is but, if he keeps painting form me, I'll be a happy guy.  \u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395662618944,"sku":"8022764-4CRYSTAL","price":20.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395662651712,"sku":"8022764-4ARMOR","price":23.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_24587733_13462889_1686938390_1_0_99942856-2a62-49d6-ad6d-34fb42518a92.jpg?v=1693502678"},{"product_id":"40x-real-wolf-skull-large-shoulder-add-on","title":"40x Real Wolf Skull : Large Shoulder Add-on","description":"This pack is designed to fit on any shoulder or rounded area of your favorite models. (YES, they fit the new marines) These are meant to personalize your army by providing a raised embelishment that makes painting easy and ensures a consistent and uniform appearance. As an added benefit, this product makes it possible to add your favorite insignia to models you’ve already painted. Simply prime, paint and glue to ensure a clean look.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395661635904,"sku":"8034083-4CRYSTAL","price":19.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395661668672,"sku":"8034083-4ARMOR","price":19.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_28610924_13471830_1686938391_1_0_7b5c0c66-e65c-4af9-8a29-546e730f59c4.jpg?v=1693502587"},{"product_id":"11-x-7mm-wolf-skulls","title":"Small Wolf Skulls (11 x7mm)","description":"NOTE: The \u003cstrong\u003eSIZE\u003c\/strong\u003e Selection Equates to \u003cstrong\u003eQuantity per Sprue\u003c\/strong\u003e, NOT the Products’ Scale.\u003cbr data-mce-fragment=\"1\"\u003e\u003cb\u003eSmall\u003c\/b\u003e sprue = \u003cstrong\u003e10 Skulls\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cb\u003eMedium\u003c\/b\u003e sprue = \u003cstrong\u003e20 Skulls\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003cbr\u003eAdd a little morbid delight to your models that only the right Skull can provide. These 3D skulls are meant to be added to your models, bases and\/or scenery. Sold unpainted, this product makes it possible to add it to models you’ve already painted. Simply prime, paint and super glue to ensure a clean look.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e  \u003cbr\u003e \u003cbr\u003e *NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP \/ Small","offer_id":49395661504832,"sku":"8034625-4CRYSTAL","price":13.75,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ Medium","offer_id":49395661537600,"sku":"8034629-4CRYSTAL","price":17.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Medium","offer_id":49395661570368,"sku":"8034629-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Small","offer_id":49395661603136,"sku":"8034625-4ARMOR","price":14.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_24611269_13472507_1686938391_1_0_5246d60a-e745-4573-991f-7c4cfad91afd.jpg?v=1693502569"},{"product_id":"10x-3d-wolf-skull-g-4a-shoulder-pads","title":"10x 3D Wolf Skull - G:4a Shoulder Pads","description":"The Generation 4 styles of shoulder pads are inspired by the Mark IV: Imperial Maximus armor. Our customers find these pads compatible with most new and classic 28mm scale marine models. Sold unpainted, each pauldron features custom-designed raised emblems, details, and patterns that simplify the painting process, ensuring a consistent and uniform appearance for your entire army.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395661275456,"sku":"M8043961-4CRYSTAL","price":17.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395661308224,"sku":"M8043961-4ARMOR","price":18.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_24653055_13485511_1686938391_1_0_71cdda29-1d8d-442b-a027-e3e75b338ef5.jpg?v=1693502538"},{"product_id":"11x-rotoaxe-skohl","title":"11x RotoAxe: Skohl","description":"This set of weapons incorporates \u003cem\u003e5 right hands\u003c\/em\u003e and \u003cem\u003e5 left hands\u003c\/em\u003e in a variety of grips to insure a unique look for each warrior. It also includes 1 weapon without a hand. These are sold unpainted, with raised emblem and detail on them that makes painting easy and ensures a consistent, uniform appearance to your entire army. These should fit both the new and classic 28mm scale, space marine or chaos marine models.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395656982848,"sku":"7050757-4CRYSTAL","price":26.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395657015616,"sku":"7050757-4ARMOR","price":29.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_21756209_12234306_1686938356_1_0_70481c25-10b5-4fc2-babb-fa351c6bf5e7.jpg?v=1693502059"},{"product_id":"11x-double-rotoaxe-hurstwic","title":"11x Double RotoAxe: Hurstwic","description":"This set of weapons incorporates \u003cem\u003e5 right hands\u003c\/em\u003e and \u003cem\u003e5 left hands \u003c\/em\u003ein a variety of grips to insure a unique look for each warrior. It also includes 1 weapon without a hand. These are sold unpainted, with raised emblem and detail on them that makes painting easy and ensures a consistent, uniform appearance to your entire army. These should fit both the new and classic 28mm scale, space marine or chaos marine models.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395656786240,"sku":"7050932-4CRYSTAL","price":31.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395656819008,"sku":"7050932-4ARMOR","price":34.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_21756627_12234518_1686938356_1_0_1b0c7a38-c792-4018-a290-2808b348a0a4.jpg?v=1693502040"},{"product_id":"10x-rotoaxe-skohl-left-handed","title":"10x RotoAxe: Skohl (Left-Handed)","description":"This set of weapons incorporates hands with a variety of grips to insure a unique look for each warrior. These are sold unpainted, with raised emblem and detail on them that makes painting easy and ensures a consistent, uniform appearance to your entire army. These should fit both the new and classic 28mm scale, space marine or chaos marine models.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395652559168,"sku":"M7205142-4CRYSTAL","price":25.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395652591936,"sku":"M7205142-4ARMOR","price":27.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_22229592_12427909_1686938359_1_0_15fff74d-85de-4b70-8dbb-9a2edfb65313.jpg?v=1693501566"},{"product_id":"11x-energy-sword-great-wolf-crusader","title":"11x Energy Sword: Great Wolf Crusader","description":"This set of weapons incorporates \u003cem\u003e5 right hands \u003c\/em\u003eand\u003cem\u003e 5 left hands\u003c\/em\u003e in a variety of grips to insure a unique look for each warrior. It also includes 1 weapon without a hand. These are sold unpainted, with raised emblem and detail on them that makes painting easy and ensures a consistent, uniform appearance to your entire army. These should fit both the new and classic 28mm scale, space marine or chaos marine models.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395645874496,"sku":"7520324-4CRYSTAL","price":23.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395645907264,"sku":"7520324-4ARMOR","price":23.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_23154702_12830803_1686938373_1_0_989a53fb-0ac5-4de8-9077-d3b725e01f9b.jpg?v=1693500935"},{"product_id":"20x-wolf-skull-tiny-convex-insignias-3mm","title":"20x Wolf Skull - Tiny Convex Insignias (3mm)","description":"These insignia are roughly 3mm and are designed to fit on any shoulder-like or convex area of your favorite models. We find they work best on Marine knees, Scout shoulder, Imperial Guard and other human-sized model shoulder pads. They even work on some of the small convex areas of vehicle models and scenery pieces. They are meant to personalize your army by providing a raised emblem that makes painting easy and ensures a consistent and uniform appearance. As an added benefit, this product makes it possible to add your favorite insignia to models you’ve already painted. Simply prime, paint and glue (Super Glue) to ensure a clean look.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395639976256,"sku":"8112766-4CRYSTAL","price":17.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395640009024,"sku":"8112766-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_28612679_13570670_1686938393_1_0_1cbe5f42-a922-459f-873c-bee890afd9fd.jpg?v=1693500193"},{"product_id":"20x-fanged-skull-tiny-convex-insignias-3mm","title":"20x Fanged Skull - Tiny Convex Insignias (3mm)","description":"These insignia are roughly 3mm and are designed to fit on any shoulder-like or convex area of your favorite models. We find they work best on Marine knees, Scout shoulder, Imperial Guard and other human-sized model shoulder pads. They even work on some of the small convex areas of vehicle models and scenery pieces. They are meant to personalize your army by providing a raised emblem that makes painting easy and ensures a consistent and uniform appearance. As an added benefit, this product makes it possible to add your favorite insignia to models you’ve already painted. Simply prime, paint and glue (Super Glue) to ensure a clean look.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395620708672,"sku":"8112767-4CRYSTAL","price":17.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395620741440,"sku":"8112767-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_28612609_13570703_1686938393_1_0_88deb88e-95e9-4967-96af-2b1310e53703.jpg?v=1693498651"},{"product_id":"norse-wolf-atlas-sarcophagus-set","title":"Norse Wolf: Atlas Sarcophagus Set","description":"The Atlas Pattern bits are designed to fit the Primaris Redemptor dreadnought model kit. It’s meant to give your standard kit a unique look that resembles a Leviathan Dreadnought of the Great Crusade Era. The parts provide raised emblems and details for easy painting. Simply wash with warm soapy water and use super glue to attach to your model.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395595116864,"sku":"9225708-4CRYSTAL","price":20.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395595149632,"sku":"9225708-4ARMOR","price":21.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_27770424_15012307_1686938426_1_0_75ae0451-0c9f-4d6a-b40d-425a7ce18125.jpg?v=1693496441"},{"product_id":"norse-wolf-atlas-pat-carapace","title":"Norse Wolf: Atlas Pat. Carapace","description":"The Atlas Pattern bits are designed to fit the Primaris Redemptor dreadnought model kit. It’s meant to give your standard kit a unique look that resembles a Leviathan Dreadnought of the Great Crusade Era. The parts provide raised emblems and details for easy painting. Simply wash with warm soapy water and use super glue to attach to your model.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395595051328,"sku":"9225710-4CRYSTAL","price":22.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395595084096,"sku":"9225710-4ARMOR","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_27770521_15012346_1686938426_1_0_9421d594-012d-48e3-b676-6582490dc909.jpg?v=1693496422"},{"product_id":"60x-wolf-head-shoulder-insignia-pack","title":"60x Wolf Head - Shoulder Insignia pack","description":"This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or mono-pose sculpts. They are intended to personalize your army by providing a raised emblem that makes painting easier and helps create a consistent, uniform look. As an additional benefit, this product allows you to add your favorite insignia to models you’ve already painted. Simply prime, paint, and glue (Super Glue) to achieve a clean appearance.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395578503488,"sku":"8179441-4CRYSTAL","price":25.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395578536256,"sku":"8179441-4ARMOR","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_25052641_13654789_1686938397_1_0_c0b151e0-b15b-4025-ae3c-90fd9d6d689a.jpg?v=1693493859"},{"product_id":"11x-rotoaxe-goretran","title":"11x RotoAxe: Goretran","description":"This set of weapons incorporates \u003cem\u003e5 right hands \u003c\/em\u003eand \u003cem\u003e5 left hands\u003c\/em\u003e in a variety of grips to insure a unique look for each warrior. It also includes 1 weapon without a hand. These are sold unpainted, with raised emblem and detail on them that makes painting easy and ensures a consistent, uniform appearance to your entire army. These should fit both the new and classic 28mm scale, space marine or chaos marine models.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395576144192,"sku":"8213210-4CRYSTAL","price":20.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395576176960,"sku":"8213210-4ARMOR","price":21.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_25145703_13698011_1686938399_1_0_fcbf6d40-b104-409f-b73e-37b384821da5.jpg?v=1693493640"},{"product_id":"10x-rotoaxe-goretran-left-handed","title":"10x RotoAxe: Goretran (Left-Handed)","description":"This set of weapons incorporates hands with a variety of grips to insure a unique look for each warrior. These are sold unpainted, with raised emblem and detail on them that makes painting easy and ensures a consistent, uniform appearance to your entire army. These should fit both the new and classic 28mm scale, space marine or chaos marine models.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395574407488,"sku":"8279672-4CRYSTAL","price":19.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395574440256,"sku":"8279672-4ARMOR","price":19.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_25382865_13790548_1686938400_1_0_31532cef-9038-4d58-acc1-b31f53f3a455.jpg?v=1693493421"},{"product_id":"10x-rotoaxe-goretran-right-handed","title":"10x RotoAxe: Goretran (Right-Handed)","description":"This set of weapons incorporates hands with a variety of grips to insure a unique look for each warrior. These are sold unpainted, with raised emblem and detail on them that makes painting easy and ensures a consistent, uniform appearance to your entire army. These should fit both the new and classic 28mm scale, space marine or chaos marine models.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395574276416,"sku":"8279677-4CRYSTAL","price":19.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395574309184,"sku":"8279677-4ARMOR","price":19.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_25383055_13790665_1686938400_1_0_1028a887-a470-4c75-bf6c-54d24a3b2ef3.jpg?v=1693493411"},{"product_id":"10x-rotoaxe-goretran-no-hand","title":"10x RotoAxe: Goretran (No Hand)","description":"\u003cem\u003eThese weapons Do NOT incorporate hands.\u003c\/em\u003e They are sold unpainted, with raised emblem and detail on them that makes painting easy and ensures a consistent, uniform appearance to your entire army. These should fit both the new and classic 28mm scale, space marine or chaos marine models.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395574145344,"sku":"8279674-4CRYSTAL","price":18.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395574178112,"sku":"8279674-4ARMOR","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_25383338_13790777_1686938400_1_0_c6fba8ee-3758-46fc-bd1c-a38663e2e8d2.jpg?v=1693493401"},{"product_id":"wolf-head-flat-vehicle-insignia-pack","title":"Wolf Head - Flat Vehicle Insignia pack","description":"\u003cp\u003eThis Vehicle Insignia pack includes several flat, roughly 2mm thick emblems in various lengths and widths, designed to fit numerous open spots on your favorite vehicles, large models, and fortifications. These spots include the multiple doors, hatches, and front plates of a traditional legion-branded vehicle kit.*\u003cbr\u003e\u003cbr\u003eIf you opt for the TufFlex material, it offers the added advantage of being flexible, allowing it to conform to curved surfaces. This is most effective on the larger insignia and works best when heated slightly. Our Classic material, however, is brittle and will snap under such pressure. Still, it’s an excellent choice for the many smooth, flat surfaces of most imperial models. Neither material reacts with Plastic Glue; use Super Glue to attach these parts to your models.\u003cbr\u003e\u003cbr\u003eOnce glued onto your project, these emblems create a raised decoration that simplifies painting and ensures a consistent, uniform look across your entire collection. You can also prime and paint these insignia first, then glue them onto already painted models. However, we recommend keeping the contact surfaces clean to ensure a secure bond with your glue.\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395573129536,"sku":"8313276-4CRYSTAL","price":40.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395573162304,"sku":"8313276-4ARMOR","price":46.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_25460947_13831767_1686938401_1_0_12acd86f-7a3e-473f-84ff-528137ecaae5.jpg?v=1693493282"},{"product_id":"10x-fang-skull-g-4a-shoulder-pad","title":"10x Fang Skull - G:4a Shoulder Pad","description":"The Generation 4 styles of shoulder pads are inspired by the Mark IV: Imperial Maximus armor. Our customers find these pads compatible with most new and classic 28mm scale marine models. Sold unpainted, each pauldron features custom-designed raised emblems, details, and patterns that simplify the painting process, ensuring a consistent and uniform appearance for your entire army.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395508150592,"sku":"4366028-4CRYSTAL","price":16.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395508183360,"sku":"4366028-4ARMOR","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_13056083_8201073_1686938304_1_0_f6ae89fa-a0e8-4d9f-9c0f-c8d321ebd101.jpg?v=1693490346"},{"product_id":"10x-long-paw-g-4a-shoulder-pad","title":"10x Long Paw - G:4a Shoulder Pad","description":"The Generation 4 styles of shoulder pads are inspired by the Mark IV: Imperial Maximus armor. Our customers find these pads compatible with most new and classic 28mm scale marine models. Sold unpainted, each pauldron features custom-designed raised emblems, details, and patterns that simplify the painting process, ensuring a consistent and uniform appearance for your entire army.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395508019520,"sku":"4366035-4CRYSTAL","price":16.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395508052288,"sku":"4366035-4ARMOR","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_13056184_8201088_1686938304_1_0_5908e5a5-6ca1-46f1-a4a5-abefde7d1040.jpg?v=1693490332"},{"product_id":"10x-wolf-paw-g-4a-shoulder-pad","title":"10x Wolf Paw - G:4a Shoulder Pad","description":"The Generation 4 styles of shoulder pads are inspired by the Mark IV: Imperial Maximus armor. Our customers find these pads compatible with most new and classic 28mm scale marine models. Sold unpainted, each pauldron features custom-designed raised emblems, details, and patterns that simplify the painting process, ensuring a consistent and uniform appearance for your entire army.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395507855680,"sku":"4366050-4CRYSTAL","price":16.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395507888448,"sku":"4366050-4ARMOR","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_13056218_8201118_1686938304_1_0_fc837b27-c505-4956-a90a-cbcc410fa092.jpg?v=1693490320"},{"product_id":"10x-storm-wolves-g-4a-shoulder-pad","title":"10x Storm Wolves - G:4a Shoulder Pad","description":"The Generation 4 styles of shoulder pads are inspired by the Mark IV: Imperial Maximus armor. Our customers find these pads compatible with most new and classic 28mm scale marine models. Sold unpainted, each pauldron features custom-designed raised emblems, details, and patterns that simplify the painting process, ensuring a consistent and uniform appearance for your entire army.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395507790144,"sku":"4366064-4CRYSTAL","price":16.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395507822912,"sku":"4366064-4ARMOR","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_13056309_8201142_1686938304_1_0_48502fc9-a64c-4f3c-be2e-d1a596f0abfc.jpg?v=1693490308"},{"product_id":"10x-wolf-head-g-4a-shoulder-pads","title":"10x Wolf Head - G:4a Shoulder Pads","description":"The Generation 4 styles of shoulder pads are inspired by the Mark IV: Imperial Maximus armor. Our customers find these pads compatible with most new and classic 28mm scale marine models. Sold unpainted, each pauldron features custom-designed raised emblems, details, and patterns that simplify the painting process, ensuring a consistent and uniform appearance for your entire army.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395463127360,"sku":"4689700-4CRYSTAL","price":16.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395463160128,"sku":"4689700-4ARMOR","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_14228137_8698313_1686938315_1_0_c87ad807-5ae5-4077-86c7-0cb7206b88e6.jpg?v=1693486912"},{"product_id":"10x-fang-skull-g-7a-shoulder-pads","title":"10x Fang Skull - G:7a Shoulder Pads","description":"The Generation 7 styles of shoulder pads are inspired by the Mark VII: Aquila armor. Our customers find these pads compatible with most new 28mm scale marine models, but look best on the classic \"Firstborn\" models. Sold unpainted, each pauldron features custom-designed raised emblems, details, and patterns that simplify the painting process, ensuring a consistent and uniform appearance for your entire army.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395462963520,"sku":"4689725-4CRYSTAL","price":15.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395462996288,"sku":"4689725-4ARMOR","price":16.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_14228164_8698334_1686938315_1_0_22d684a7-4218-4f94-adb6-2112ec81f8b9.jpg?v=1693486897"},{"product_id":"10x-long-paw-g-7a-shoulder-pads","title":"10x Long Paw - G:7a Shoulder Pads","description":"The Generation 7 styles of shoulder pads are inspired by the Mark VII: Aquila armor. Our customers find these pads compatible with most new 28mm scale marine models, but look best on the classic \"Firstborn\" models. Sold unpainted, each pauldron features custom-designed raised emblems, details, and patterns that simplify the painting process, ensuring a consistent and uniform appearance for your entire army.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395462865216,"sku":"4689738-4CRYSTAL","price":15.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395462897984,"sku":"4689738-4ARMOR","price":16.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_14228208_8698351_1686938315_1_0_a642a1da-b6ca-4e9b-8fdb-748b94a78969.jpg?v=1693486883"},{"product_id":"10x-wolf-paw-g-7a-shoulder-pads","title":"10x Wolf Paw - G:7a Shoulder Pads","description":"The Generation 7 styles of shoulder pads are inspired by the Mark VII: Aquila armor. Our customers find these pads compatible with most new 28mm scale marine models, but look best on the classic \"Firstborn\" models. Sold unpainted, each pauldron features custom-designed raised emblems, details, and patterns that simplify the painting process, ensuring a consistent and uniform appearance for your entire army.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395462766912,"sku":"4689747-4CRYSTAL","price":15.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395462799680,"sku":"4689747-4ARMOR","price":16.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_14228231_8698364_1686938316_1_0_8888c23a-f2c9-4efc-9d2c-228e07f280d5.jpg?v=1693486870"},{"product_id":"10x-storm-wolf-g-7a-shoulder-pads","title":"10x Storm Wolf - G:7a Shoulder Pads","description":"The Generation 7 styles of shoulder pads are inspired by the Mark VII: Aquila armor. Our customers find these pads compatible with most new 28mm scale marine models, but look best on the classic \"Firstborn\" models. Sold unpainted, each pauldron features custom-designed raised emblems, details, and patterns that simplify the painting process, ensuring a consistent and uniform appearance for your entire army.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395462635840,"sku":"4689755-4CRYSTAL","price":15.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395462668608,"sku":"4689755-4ARMOR","price":16.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_14228256_8698374_1686938316_1_0_66dbb0d4-3f04-4e95-a974-b321f196f858.jpg?v=1693486857"},{"product_id":"10x-wolf-head-g-7a-shoulder-pads","title":"10x Wolf Head - G:7a Shoulder Pads","description":"The Generation 7 styles of shoulder pads are inspired by the Mark VII: Aquila armor. Our customers find these pads compatible with most new 28mm scale marine models, but look best on the classic \"Firstborn\" models. Sold unpainted, each pauldron features custom-designed raised emblems, details, and patterns that simplify the painting process, ensuring a consistent and uniform appearance for your entire army.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395462439232,"sku":"4689769-4CRYSTAL","price":15.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395462472000,"sku":"4689769-4ARMOR","price":16.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_14228298_8698390_1686938316_1_0_f1d05b02-e60b-4edd-8a23-4711d3e2cc9a.jpg?v=1693486841"},{"product_id":"10x-wolf-rampant-rapfire-dc1-w-scope","title":"10x Wolf Rampant: Mk1c Rapfire Marksman","description":"\u003cp\u003e\u003cstrong\u003eOur one-handed Combo Weapon\u003c\/strong\u003e range is inspired by the diverse variety of combi-weapons. From an over-under design for standard line troops to the side-by-side variants for Terminators, you'll find the specialized weapon you need for any occasion. These custom-designed weapons are sold unpainted and are intended to replace the weapons of your new or classic 28mm scale marine models.*\u003c\/p\u003e\n\u003cp\u003eThese weapons incorporate only a single right hand holding the gun. They are typically used with models that already have the left arm ready to hold the gun stock, holding a different item, or gesturing in another way. This set is not recommended for models that require both hands to be part of the weapon. For those needs, we recommend any of our 2-handed Sets (Prime, 30k, etc.).\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395434225984,"sku":"6203480-4CRYSTAL","price":23.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395434258752,"sku":"6203480-4ARMOR","price":24.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_19119418_11152464_1686938340_1_0_38cbbce0-81ee-40d9-9822-a243a48255e8.jpg?v=1693483971"},{"product_id":"60x-wolf-rampant-right-shoulder-insignia-pack","title":"60x Wolf Rampant : Right Shoulder Insignia pack","description":"This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or mono-pose sculpts. They are intended to personalize your army by providing a raised emblem that makes painting easier and helps create a consistent, uniform look. As an additional benefit, this product allows you to add your favorite insignia to models you’ve already painted. Simply prime, paint, and glue (Super Glue) to achieve a clean appearance.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395432390976,"sku":"6258947-4CRYSTAL","price":25.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395432423744,"sku":"6258947-4ARMOR","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_19290176_11223010_1686938341_1_0_8741afdb-8c33-43da-b0b9-fef3e66110d3.jpg?v=1693483754"},{"product_id":"60x-wolf-rampant-shoulder-insignia-pack","title":"60X Wolf Rampant : Shoulder Insignia pack","description":"This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or mono-pose sculpts. They are intended to personalize your army by providing a raised emblem that makes painting easier and helps create a consistent, uniform look. As an additional benefit, this product allows you to add your favorite insignia to models you’ve already painted. Simply prime, paint, and glue (Super Glue) to achieve a clean appearance.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395432292672,"sku":"6258927-4CRYSTAL","price":25.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395432325440,"sku":"6258927-4ARMOR","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_19290309_11223039_1686938341_1_0_bacf5cca-bc78-462e-9d15-015449db3676.jpg?v=1693483744"},{"product_id":"10x-fang-skull-g-2a-shoulder-pads","title":"10x Fang Skull - G:2a Shoulder Pads","description":"The Generation 2 shoulder pads are inspired by the Mark II: Crusader armor. Our customers find that these pads are compatible with most new and classic 28mm scale marine models. Sold unpainted, each pauldron features custom-designed raised emblems, details, and patterns that simplify the painting process, ensuring a consistent and uniform appearance for your entire army.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395421905216,"sku":"4735495-4CRYSTAL","price":16.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395421937984,"sku":"4735495-4ARMOR","price":16.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_14380360_8753990_1686938316_1_0_4cb20cb1-36d3-446c-8707-c9f8ae2b699a.jpg?v=1693482525"},{"product_id":"10x-long-paw-g-2a-shoulder-pads","title":"10x Long Paw - G:2a Shoulder Pads","description":"The Generation 2 shoulder pads are inspired by the Mark II: Crusader armor. Our customers find that these pads are compatible with most new and classic 28mm scale marine models. Sold unpainted, each pauldron features custom-designed raised emblems, details, and patterns that simplify the painting process, ensuring a consistent and uniform appearance for your entire army.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395421806912,"sku":"4735531-4CRYSTAL","price":16.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395421839680,"sku":"4735531-4ARMOR","price":16.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_14380454_8754015_1686938317_1_0_2bca4b57-36b0-4f24-84c8-e53b4e290590.jpg?v=1693482511"},{"product_id":"10x-wolf-paw-g-2a-shoulder-pads","title":"10x Wolf Paw - G:2a Shoulder Pads","description":"The Generation 2 shoulder pads are inspired by the Mark II: Crusader armor. Our customers find that these pads are compatible with most new and classic 28mm scale marine models. Sold unpainted, each pauldron features custom-designed raised emblems, details, and patterns that simplify the painting process, ensuring a consistent and uniform appearance for your entire army.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395421708608,"sku":"4735551-4CRYSTAL","price":16.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395421741376,"sku":"4735551-4ARMOR","price":16.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_14380499_8754042_1686938317_1_0_eb51328a-87cf-46b5-bb2a-82194e2af51c.jpg?v=1693482498"},{"product_id":"10x-storm-wolf-g-2a-shoulder-pads","title":"10x Storm Wolf - G:2a Shoulder Pads","description":"The Generation 2 shoulder pads are inspired by the Mark II: Crusader armor. Our customers find that these pads are compatible with most new and classic 28mm scale marine models. Sold unpainted, each pauldron features custom-designed raised emblems, details, and patterns that simplify the painting process, ensuring a consistent and uniform appearance for your entire army.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395421512000,"sku":"4735582-4CRYSTAL","price":16.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395421544768,"sku":"4735582-4ARMOR","price":16.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_14380556_8754070_1686938317_1_0_09f91300-1a69-4b22-bb76-5506bec2bb41.jpg?v=1693482484"},{"product_id":"10x-sawtooth-1-g-2a-shoulder-pads","title":"10x Sawtooth 1 - G:2a Shoulder Pads","description":"\u003cp\u003eThe Generation 2 shoulder pads are inspired by the Mark II: Crusader armor. Our customers find that these pads are compatible with most new and classic 28mm scale marine models. Sold unpainted, each pauldron features custom-designed raised emblems, details, and patterns that simplify the painting process, ensuring a consistent and uniform appearance for your entire army.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395408273728,"sku":"4990839-4CRYSTAL","price":16.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395408306496,"sku":"4990839-4ARMOR","price":16.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_15275251_9068607_1686938325_1_0_0ede64ff-6c48-4a91-8c44-992c3f23d61d.jpg?v=1693480989"},{"product_id":"10x-sawtooth-2-g-2a-shoulder-pads","title":"10x Sawtooth 2 - G:2a Shoulder Pads","description":"\u003cp\u003eThe Generation 2 shoulder pads are inspired by the Mark II: Crusader armor. Our customers find that these pads are compatible with most new and classic 28mm scale marine models. Sold unpainted, each pauldron features custom-designed raised emblems, details, and patterns that simplify the painting process, ensuring a consistent and uniform appearance for your entire army.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395408175424,"sku":"4993823-4CRYSTAL","price":16.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395408208192,"sku":"4993823-4ARMOR","price":16.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_15284689_9072140_1686938325_1_0_a8a1e7c7-e90e-4f33-a9ed-e2eb41b8d70c.jpg?v=1693480978"},{"product_id":"10x-sawtooth-1-g-3a-shoulder-pads","title":"10x Sawtooth 1 - G:3a Shoulder Pads","description":"The Generation 3 styles of shoulder pads are inspired to represent the Mark III: Iron armor. Our customers find that these pads are compatible with most new and classic 28mm scale marine models. Sold unpainted, each pauldron features custom-designed raised emblems, details, and patterns that simplify the painting process, ensuring a consistent and uniform appearance for your entire army.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395408011584,"sku":"4993835-4CRYSTAL","price":16.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395408044352,"sku":"4993835-4ARMOR","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_15284745_9072153_1686938325_1_0_3efb2f99-8254-438f-86f8-a049a774321a.jpg?v=1693480966"},{"product_id":"10x-sawtooth-2-g-3a-shoulder-pads","title":"10x Sawtooth 2 - G:3a Shoulder Pads","description":"\u003cp\u003eThe Generation 3 styles of shoulder pads are inspired to represent the Mark III: Iron armor. Our customers find that these pads are compatible with most new and classic 28mm scale marine models. Sold unpainted, each pauldron features custom-designed raised emblems, details, and patterns that simplify the painting process, ensuring a consistent and uniform appearance for your entire army.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395407913280,"sku":"4993838-4CRYSTAL","price":16.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395407946048,"sku":"4993838-4ARMOR","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_15284785_9072159_1686938325_1_0_df2595a2-0b4b-46bf-b3fb-f30afd0af0da.jpg?v=1693480955"},{"product_id":"10x-sawtooth-1-g-4a-shoulder-pads","title":"10x Sawtooth 1 - G:4a Shoulder Pads","description":"The Generation 4 styles of shoulder pads are inspired by the Mark IV: Imperial Maximus armor. Our customers find these pads compatible with most new and classic 28mm scale marine models. Sold unpainted, each pauldron features custom-designed raised emblems, details, and patterns that simplify the painting process, ensuring a consistent and uniform appearance for your entire army.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395407814976,"sku":"4993850-4CRYSTAL","price":16.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395407847744,"sku":"4993850-4ARMOR","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_15284820_9072174_1686938325_1_0_7b0270a7-8f2d-48b1-9a22-b2551e4ac5ce.jpg?v=1693480944"},{"product_id":"10x-sawtooth-2-g-4a-shoulder-pads","title":"10x Sawtooth 2 - G:4a Shoulder Pads","description":"The Generation 4 styles of shoulder pads are inspired by the Mark IV: Imperial Maximus armor. Our customers find these pads compatible with most new and classic 28mm scale marine models. Sold unpainted, each pauldron features custom-designed raised emblems, details, and patterns that simplify the painting process, ensuring a consistent and uniform appearance for your entire army.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395407421760,"sku":"4993862-4CRYSTAL","price":16.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395407454528,"sku":"4993862-4ARMOR","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_15284876_9072198_1686938325_1_0_fc1c5dcc-0b46-40cc-9cb8-a25ba453159d.jpg?v=1693480934"},{"product_id":"10x-sawtooth-1-g-7a-shoulder-pads","title":"10x Sawtooth 1 - G:7a Shoulder Pads","description":"The Generation 7 styles of shoulder pads are inspired by the Mark VII: Aquila armor. Our customers find these pads compatible with most new 28mm scale marine models, but look best on the classic \"Firstborn\" models. Sold unpainted, each pauldron features custom-designed raised emblems, details, and patterns that simplify the painting process, ensuring a consistent and uniform appearance for your entire army.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395407323456,"sku":"4993892-4CRYSTAL","price":15.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395407356224,"sku":"4993892-4ARMOR","price":16.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_15284960_9072223_1686938325_1_0_7bf27c4a-a372-43ef-9a1a-bea9a504c2c1.jpg?v=1693480922"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/collections\/Coll-StormWolves_c942301a-26ec-4ac0-8fc6-de966d85f192.png?v=1674163124","url":"https:\/\/popgoesthemonkey.com\/collections\/storm-wolves-1\/vehicle_dt-impala+parts_torso-legs.oembed","provider":"Pop Goes the Monkey","version":"1.0","type":"link"}