Mag-Swap T-24 Drones

NOTE: The SIZE Selection Equates to Quantity per Sprue, NOT the Products’ Scale.
Small sprue = 1 Drone
Large sprue = 2 Drones

MAG-Swap Drones allow you to easily change the load-out of your Tau Federation Drones by the use of a few 2.5mm x 1mm disc magnets. The hover-deck can be glued securely to a standard flight stand (or one of ours) and the shield/weapon system is attached at the top magnetically. 

Each Drones comes with a Shield, Missile Rack, Marker-Optics and Blaster Gun attachments. To fully magnetize both drones you will need ten 2.5mm x 1mm disc magnets.

Have you checked our Horschpower Concepts yet? This was the first, of what I hope will be, many collaborations between our two companies. If you are looking for a wider-range of unique, Tau conversion bits, weapons swaps, and "counts-as" models for your next project, please check out Brandon's Shapeways store.

Fine Detail Plastic (Tan, Clear, etc.) is an acrylic material capable of extremely high detail and contrast without the, sometimes, uneven nature of the previous printing process. Providing the finest layer height and most uniform printing process, this material is the best choice for 3D printed parts that meet the fine detail requirements of our hobby. Due to the nature of the material, thin and small parts can be brittle, so handle with care. However, some of the Clear Fine Detail parts can be more flexible. For all Fine Detail parts use super glue to adhere these parts to your models.


*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.