Skip to content
Insignias Full Models Conv.Kits Marines Head Swaps Weapons Shields Vehicle Parts Walkers Apparel

Monkey Resin 3

Monkey Resin 3 is a high-quality UV cured resin that will come attached to a support structure from the production process. The parts are however, pre-cleaned and ready for primer once removed. Use only super glue to adhere these parts to your models.

To remove the bits from their supports: submerge the whole assembly in water that is hot to the touch for 5 minutes. Use your fingernail to punch away several supports to create a starting point, and carefully peel your parts off of the remaining supports all together.

You can use a very fine-grit sandpaper if needed to smooth any surface or feature further. Always be sure to wear a mask when working around resin dust.

Rhinoback - Impulsor Conversion Kit

€22,95 - €22,95
€22,95
€22,95 - €22,95
€22,95

The Rhinoback crew compartment comes in 4 pieces and meant to fit onto the back section of the Primaris Impulsor kit. The Tailgate slots into a wor...

View full details
€22,95 - €22,95
€22,95
€22,95 - €22,95
€22,95
Twin Rapfire - R1 Hatch Turrets 3d printed
Twin Rapfire - R1 Hatch Turrets 3d printed Small = 1 Hatch Turret

Twin Rapfire - R1 Hatch Turrets

€9,95 - €33,95
€9,95 - €33,95
€9,95 - €33,95
€9,95

These Hatch Turrets are designed to fit into the hatches of a standard troop tank, or similar size personal access point. Our customers have found ...

View full details
€9,95 - €33,95
€9,95 - €33,95
€9,95 - €33,95
€9,95

Shaggy Wolf : Full Rhinoback Impulsor Kit

€25,95 - €25,95
€25,95
€25,95 - €25,95
€25,95

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details
€25,95 - €25,95
€25,95
€25,95 - €25,95
€25,95

Angel Tears : Full Rhinoback Impulsor Kit

€25,95 - €25,95
€25,95
€25,95 - €25,95
€25,95

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details
€25,95 - €25,95
€25,95
€25,95 - €25,95
€25,95

Winged Sword : Full Rhinoback Impulsor Kit

€25,95 - €25,95
€25,95
€25,95 - €25,95
€25,95

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details
€25,95 - €25,95
€25,95
€25,95 - €25,95
€25,95
Meltafire - R1 Hatch Turrets 3d printed
Meltafire - R1 Hatch Turrets 3d printed Small = 1 Hatch Turret

Meltafire - R1 Hatch Turrets

€9,95 - €37,95
€9,95 - €37,95
€9,95 - €37,95
€9,95

These Hatch Turrets are designed to fit into the hatches of a standard troop tank, or similar size personal access point. Our customers have found ...

View full details
€9,95 - €37,95
€9,95 - €37,95
€9,95 - €37,95
€9,95

Kings Fist : Full Rhinoback Impulsor Kit

€25,95 - €25,95
€25,95
€25,95 - €25,95
€25,95

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details
€25,95 - €25,95
€25,95
€25,95 - €25,95
€25,95
Maltese Cross : Impulsor Branding Kit 1 3d printed
Maltese Cross : Impulsor Branding Kit 1 3d printed

Maltese Cross : Impala Branding Kit 1

€17,95 - €34,95
€17,95 - €34,95
€17,95 - €34,95
€17,95

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details
€17,95 - €34,95
€17,95 - €34,95
€17,95 - €34,95
€17,95
Shaggy Wolf: Impulsor Branding Kit 1 3d printed
Shaggy Wolf: Impulsor Branding Kit 1 3d printed

Shaggy Wolf: Impala Branding Kit 1

€17,95 - €33,95
€17,95 - €33,95
€17,95 - €33,95
€17,95

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details
€17,95 - €33,95
€17,95 - €33,95
€17,95 - €33,95
€17,95

Xenos Hunters: Top-Hatch Component

€11,95 - €18,95
€11,95 - €18,95
€11,95 - €18,95
€11,95

These Top-hatch Components are meant to fit onto the Rhino Chassis or Rhinoback crew compartment conversion kit. They have 2 different sides and fi...

View full details
€11,95 - €18,95
€11,95 - €18,95
€11,95 - €18,95
€11,95

Impala Defensive System Mounting Kit (Magnet-Ready)

€20,95 - €20,95
€20,95
€20,95 - €20,95
€20,95

The Impala Defensive System Mounting Kit is designed to integrate seamlessly with our Rhinoback crew compartment conversion kit. However, the magne...

View full details
€20,95 - €20,95
€20,95
€20,95 - €20,95
€20,95
Shaggy Wolf : Impulsor Front Plate 1 3d printed

Shaggy Wolf : Impala Front Plate 1

€14,95 - €26,95
€14,95 - €26,95
€14,95 - €26,95
€14,95

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details
€14,95 - €26,95
€14,95 - €26,95
€14,95 - €26,95
€14,95

Ultra Legion : Full Rhinoback Impulsor Kit

€25,95 - €25,95
€25,95
€25,95 - €25,95
€25,95

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details
€25,95 - €25,95
€25,95
€25,95 - €25,95
€25,95

Neptune Spears : Full Rhinoback Impulsor Kit

€25,95 - €25,95
€25,95
€25,95 - €25,95
€25,95

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details
€25,95 - €25,95
€25,95
€25,95 - €25,95
€25,95

Xenos Hunters : Full Rhinoback Impulsor Kit 2

€25,95 - €25,95
€25,95
€25,95 - €25,95
€25,95

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details
€25,95 - €25,95
€25,95
€25,95 - €25,95
€25,95
Kings Fist: Impulsor Branding Kit 1 3d printed
Kings Fist: Impulsor Branding Kit 1 3d printed These components are designed to be able to fit the Primaris Impulsor kit.

Kings Fist: Impala Branding Kit 1

€17,95 - €34,95
€17,95 - €34,95
€17,95 - €34,95
€17,95

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details
€17,95 - €34,95
€17,95 - €34,95
€17,95 - €34,95
€17,95
Angel Tears : Impulsor Front Plate 1 3d printed
Angel Tears : Impulsor Front Plate 1 3d printed

Angel Tears : Impala Front Plate 1

€14,95 - €26,95
€14,95 - €26,95
€14,95 - €26,95
€14,95

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details
€14,95 - €26,95
€14,95 - €26,95
€14,95 - €26,95
€14,95
Maltese Cross : Impulsor Front Plate 1 3d printed
Maltese Cross : Impulsor Front Plate 1 3d printed

Maltese Cross : Impala Front Plate 1

€14,95 - €26,95
€14,95 - €26,95
€14,95 - €26,95
€14,95

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details
€14,95 - €26,95
€14,95 - €26,95
€14,95 - €26,95
€14,95

Xenos Hunters : Impala Front Plate 1

€14,95 - €26,95
€14,95 - €26,95
€14,95 - €26,95
€14,95

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details
€14,95 - €26,95
€14,95 - €26,95
€14,95 - €26,95
€14,95
Neptune Spears : Impulsor Branding Kit 3d printed
Neptune Spears : Impulsor Branding Kit 3d printed

Neptune Spears : Impala Branding Kit

€17,95 - €34,95
€17,95 - €34,95
€17,95 - €34,95
€17,95

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details
€17,95 - €34,95
€17,95 - €34,95
€17,95 - €34,95
€17,95

Xenos Hunters : Full Rhinoback Impulsor Kit 1

€25,95 - €25,95
€25,95
€25,95 - €25,95
€25,95

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details
€25,95 - €25,95
€25,95
€25,95 - €25,95
€25,95

Dragon Heads : Full Rhinoback Impala Kit 3

€25,95 - €25,95
€25,95
€25,95 - €25,95
€25,95

Our Rhinoback Impala is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your tr...

View full details
€25,95 - €25,95
€25,95
€25,95 - €25,95
€25,95
Flamefire - R1 Hatch Turrets 3d printed
Flamefire - R1 Hatch Turrets 3d printed Small = 1 Hatch Turret

Flamefire - R1 Hatch Turrets

€9,95 - €36,95
€9,95 - €36,95
€9,95 - €36,95
€9,95

These Hatch Turrets are designed to fit into the hatches of a standard troop tank, or similar size personal access point. Our customers have found ...

View full details
€9,95 - €36,95
€9,95 - €36,95
€9,95 - €36,95
€9,95
4 Piece Combo - R1 Hatch Turrets 3d printed Similar Product with Vehicle Insignia on the top.
4 Piece Combo - R1 Hatch Turrets 3d printed

4 Piece Combo - R1 Hatch Turrets

€16,95 - €37,95
€16,95 - €37,95
€16,95 - €37,95
€16,95

This kit includes: 1  Twin Rapfire, 1 Flamefire, 1 Meltafire, & 1 Plasfire TurretThese Hatch Turrets are designed to fit into the hatches of a ...

View full details
€16,95 - €37,95
€16,95 - €37,95
€16,95 - €37,95
€16,95
Angel Tears : Impulsor Branding Kit 1 3d printed
Angel Tears : Impulsor Branding Kit 1 3d printed These components are designed to be able to fit the Primaris Impulsor kit

Angel Tears : Impala Branding Kit 1

€17,95 - €34,95
€17,95 - €34,95
€17,95 - €34,95
€17,95

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details
€17,95 - €34,95
€17,95 - €34,95
€17,95 - €34,95
€17,95
Ultra Legion: Impulsor Branding Kit 1 3d printed
Ultra Legion: Impulsor Branding Kit 1 3d printed

Ultra Legion: Impala Branding Kit 1

€17,95 - €34,95
€17,95 - €34,95
€17,95 - €34,95
€17,95

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details
€17,95 - €34,95
€17,95 - €34,95
€17,95 - €34,95
€17,95
Plasfire - R1 Hatch Turrets 3d printed
Plasfire - R1 Hatch Turrets 3d printed Small = 1 Hatch Turret

Plasfire - R1 Hatch Turrets

€9,95 - €36,95
€9,95 - €36,95
€9,95 - €36,95
€9,95

These Hatch Turrets are designed to fit into the hatches of a standard troop tank, or similar size personal access point. Our customers have found ...

View full details
€9,95 - €36,95
€9,95 - €36,95
€9,95 - €36,95
€9,95
Winged Sword : Impulsor Front Plate 1 3d printed
Winged Sword : Impulsor Front Plate 1 3d printed

Winged Sword : Impala Front Plate 1

€8,95 - €26,95
€8,95 - €26,95
€8,95 - €26,95
€8,95

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details
€8,95 - €26,95
€8,95 - €26,95
€8,95 - €26,95
€8,95
Skulls & Crosses : Impulsor Front Plate 3d printed
Skulls & Crosses : Impulsor Front Plate 3d printed

Skulls & Crosses : Impala Front Plate

€14,95 - €26,95
€14,95 - €26,95
€14,95 - €26,95
€14,95

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details
€14,95 - €26,95
€14,95 - €26,95
€14,95 - €26,95
€14,95

Dragon Heads : Full Rhinoback Impala Kit 4

€25,95 - €25,95
€25,95
€25,95 - €25,95
€25,95

Our Rhinoback Impala is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your tr...

View full details
€25,95 - €25,95
€25,95
€25,95 - €25,95
€25,95
Blood Wraiths : Impulsor Front Plate 3d printed
Blood Wraiths : Impulsor Front Plate 3d printed

Blood Wraiths : Impala Front Plate

€15,95 - €26,95
€15,95 - €26,95
€15,95 - €26,95
€15,95

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details
€15,95 - €26,95
€15,95 - €26,95
€15,95 - €26,95
€15,95
the Kracken : Impulsor Branding Kit 2 3d printed
the Kracken : Impulsor Branding Kit 2 3d printed

the Kracken : Impala Branding Kit 2

€17,95 - €34,95
€17,95 - €34,95
€17,95 - €34,95
€17,95

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details
€17,95 - €34,95
€17,95 - €34,95
€17,95 - €34,95
€17,95
Kings Fist : Impulsor Front Plate 1 3d printed
Kings Fist : Impulsor Front Plate 1 3d printed It replaces the associated part of the Impulsor kit.

Kings Fist : Impala Front Plate 1

€14,95 - €26,95
€14,95 - €26,95
€14,95 - €26,95
€14,95

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details
€14,95 - €26,95
€14,95 - €26,95
€14,95 - €26,95
€14,95
Ultra Legion : Impulsor Front Plate 1 3d printed
Ultra Legion : Impulsor Front Plate 1 3d printed

Ultra Legion : Impala Front Plate 1

€14,95 - €26,95
€14,95 - €26,95
€14,95 - €26,95
€14,95

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details
€14,95 - €26,95
€14,95 - €26,95
€14,95 - €26,95
€14,95
Hav-Launcher - R1 Hatch Turrets 3d printed
Hav-Launcher - R1 Hatch Turrets 3d printed

Hav-Launcher - R1 Hatch Turrets

€10,95 - €47,95
€10,95 - €47,95
€10,95 - €47,95
€10,95

These Hatch Turrets are designed to fit into the hatches of a standard troop tank, or similar size personal access point. Our customers have found ...

View full details
€10,95 - €47,95
€10,95 - €47,95
€10,95 - €47,95
€10,95
Machinists: Impala Front Plate 2 3d printed
Machinists: Impala Front Plate 2 3d printed

Machinists : Impala Front Plate 2

€14,95 - €26,95
€14,95 - €26,95
€14,95 - €26,95
€14,95

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details
€14,95 - €26,95
€14,95 - €26,95
€14,95 - €26,95
€14,95
Spikes & Chain : Impulsor Front Plate 3d printed
Spikes & Chain : Impulsor Front Plate 3d printed

Spikes & Chain : Impala Front Plate

€14,95 - €26,95
€14,95 - €26,95
€14,95 - €26,95
€14,95

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details
€14,95 - €26,95
€14,95 - €26,95
€14,95 - €26,95
€14,95
Skull Wall : Impulsor Front Plate 3d printed
Skull Wall : Impulsor Front Plate 3d printed

Skull Wall : Impala Front Plate

€14,95 - €26,95
€14,95 - €26,95
€14,95 - €26,95
€14,95

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details
€14,95 - €26,95
€14,95 - €26,95
€14,95 - €26,95
€14,95
Neptune Spears : Impulsor Front Plate 3d printed
Neptune Spears : Impulsor Front Plate 3d printed

Neptune Spears : Impala Front Plate

€14,95 - €26,95
€14,95 - €26,95
€14,95 - €26,95
€14,95

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details
€14,95 - €26,95
€14,95 - €26,95
€14,95 - €26,95
€14,95
Shadow Vipers : Impala Branding Kit 1 3d printed
Shadow Vipers : Impala Branding Kit 1 3d printed

Shadow Vipers : Impala Branding Kit 1

€17,95 - €34,95
€17,95 - €34,95
€17,95 - €34,95
€17,95

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details
€17,95 - €34,95
€17,95 - €34,95
€17,95 - €34,95
€17,95

Dragon Heads : Full Rhinoback Impulsor Kit 2

€25,95 - €25,95
€25,95
€25,95 - €25,95
€25,95

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details
€25,95 - €25,95
€25,95
€25,95 - €25,95
€25,95

the Kracken : Full Rhinoback Impulsor Kit

€25,95 - €25,95
€25,95
€25,95 - €25,95
€25,95

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details
€25,95 - €25,95
€25,95
€25,95 - €25,95
€25,95
VoidScale : Impala Front Plate 3d printed
VoidScale : Impala Front Plate 3d printed

VoidScale : Impala Front Plate

€14,95 - €26,95
€14,95 - €26,95
€14,95 - €26,95
€14,95

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details
€14,95 - €26,95
€14,95 - €26,95
€14,95 - €26,95
€14,95
Black Dragons : Impala Branding Kit 2 3d printed

Black Dragons : Impala Branding Kit 2

€17,95 - €34,95
€17,95 - €34,95
€17,95 - €34,95
€17,95

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details
€17,95 - €34,95
€17,95 - €34,95
€17,95 - €34,95
€17,95
Black Dragons : Impala Branding Kit 1 3d printed
Black Dragons : Impala Branding Kit 1 3d printed

Black Dragons : Impala Branding Kit 1

€17,95 - €34,95
€17,95 - €34,95
€17,95 - €34,95
€17,95

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details
€17,95 - €34,95
€17,95 - €34,95
€17,95 - €34,95
€17,95
Storm Scars : Impala Front Plate 1 3d printed
Storm Scars : Impala Front Plate 1 3d printed

Storm Scars : Impala Front Plate 1

€14,95 - €26,95
€14,95 - €26,95
€14,95 - €26,95
€14,95

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details
€14,95 - €26,95
€14,95 - €26,95
€14,95 - €26,95
€14,95
Clan Amphisbaena : Impala Front Plate 1 3d printed
Clan Amphisbaena : Impala Front Plate 1 3d printed

Clan Amphisbaena : Impala Front Plate 1

€14,95 - €26,95
€14,95 - €26,95
€14,95 - €26,95
€14,95

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details
€14,95 - €26,95
€14,95 - €26,95
€14,95 - €26,95
€14,95
Clan Amphisbaena: Impala Front Plate 2 3d printed
Clan Amphisbaena: Impala Front Plate 2 3d printed

Clan Amphisbaena: Impala Front Plate 2

€14,95 - €26,95
€14,95 - €26,95
€14,95 - €26,95
€14,95

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details
€14,95 - €26,95
€14,95 - €26,95
€14,95 - €26,95
€14,95

Featured collection

60x Maltese Cross : Shoulder Insignia pack 3d printed
60x Maltese Cross : Shoulder Insignia pack 3d printed

60x Maltese Cross : Shoulder Insignia pack

€14,95 - €16,95
€14,95 - €16,95
€14,95 - €16,95
€14,95

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
€14,95 - €16,95
€14,95 - €16,95
€14,95 - €16,95
€14,95
4x10 Squad Making MultiPack 3d printed
4x10 Squad Making MultiPack 3d printed

4x10 Squad Making MultiPack

€19,95 - €21,95
€19,95 - €21,95
€19,95 - €21,95
€19,95

This pack contains 10 Tactical, 10 Assault, 10 Devestator, and 10 Comand marks, designed to fit on shoulder-like or rounded area of your favorite m...

View full details
€19,95 - €21,95
€19,95 - €21,95
€19,95 - €21,95
€19,95
Xenos Hunters: Redemptor Honor Kit 3d printed

Xenos Hunters: Redemptor Honor Kit

€12,95 - €17,95
€12,95 - €17,95
€12,95 - €17,95
€12,95

These bits are designed to fit the Primaris Redemptor dreadnought model. They're meant to give your standard kit a unique look and provide raised e...

View full details
€12,95 - €17,95
€12,95 - €17,95
€12,95 - €17,95
€12,95
Prime Marine - Adjustable Arms (PM) 3d printed
Prime Marine - Adjustable Arms (PM) 3d printed

Prime Marine - Adjustable Arms (PM)

€14,95 - €21,95
€14,95 - €21,95
€14,95 - €21,95
€14,95

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms)Medium sprue = 10 Sets (20 tot...

View full details
€14,95 - €21,95
€14,95 - €21,95
€14,95 - €21,95
€14,95
Deathwatch Set 1 : Shoulder Insignia pack 3d printed

Deathwatch Set 1 : Shoulder Insignia pack

€16,95 - €18,95
€16,95 - €18,95
€16,95 - €18,95
€16,95

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
€16,95 - €18,95
€16,95 - €18,95
€16,95 - €18,95
€16,95
60x Kings Fist - Shoulder Insignia pack 3d printed
60x Kings Fist - Shoulder Insignia pack 3d printed

60x Kings Fist - Shoulder Insignia pack

€19,95 - €22,95
€19,95 - €22,95
€19,95 - €22,95
€19,95

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
€19,95 - €22,95
€19,95 - €22,95
€19,95 - €22,95
€19,95

Antonis : Arch Battleknight Conversion Kit

€31,95 - €60,95
€31,95 - €60,95
€31,95 - €60,95
€31,95

This conversion kit is designed to fit a standard GW Nemesis Dreadknight model kit. It is not a full model, just parts to add to your model kit to ...

View full details
€31,95 - €60,95
€31,95 - €60,95
€31,95 - €60,95
€31,95
60x Ultra Legion - Shoulder Insignia pack 3d printed
60x Ultra Legion - Shoulder Insignia pack 3d printed

60x Ultra Legion - Shoulder Insignia pack

€19,95 - €22,95
€19,95 - €22,95
€19,95 - €22,95
€19,95

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
€19,95 - €22,95
€19,95 - €22,95
€19,95 - €22,95
€19,95
10x Base - Crested G:10 Prime Helmets 3d printed
10x Base - Crested G:10 Prime Helmets 3d printed

10x Base - Crested G:11 Prime Helmets

€15,95 - €15,95
€15,95
€15,95 - €15,95
€15,95

The G:11 Prime Helmets were designed by the free-blade artist, Cornivius. It was inspired by the new Primaries models with a subtle ancient greek h...

View full details
€15,95 - €15,95
€15,95
€15,95 - €15,95
€15,95
Gen:3 Iron - Adjustable Arms 3d printed
Gen:3 Iron - Adjustable Arms 3d printed Small = 5 Sets / Medium = 10 Sets

Gen:3 Iron - Adjustable Arms

€14,95 - €22,95
€14,95 - €22,95
€14,95 - €22,95
€14,95

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms) Medium sprue = 10 Sets (20 to...

View full details
€14,95 - €22,95
€14,95 - €22,95
€14,95 - €22,95
€14,95
10x Deathwatch - T:1a Terminator Shoulders 3d printed
10x Deathwatch - T:1a Terminator Shoulders 3d printed

10x Xenos Hunters - T:1a Terminator Shoulders

€17,95 - €17,95
€17,95
€17,95 - €17,95
€17,95

The Terminator Series 1 style of shoulder pads are inspired to represent the Indomitus pattern Terminator armor (Standard). Sold unpainted, each pa...

View full details
€17,95 - €17,95
€17,95
€17,95 - €17,95
€17,95
View all Collection
View all Collection
Shop collection