{"title":"Character Kit","description":"","products":[{"product_id":"smash-captain-kit-basic-pm","title":"Smash Captain Kit - Basic (PM)","description":"\u003cstrong\u003eAre you looking for a New \"Prime\" Marine (PM) Captain with a Jet Pack, a Big Hammer, and a Bad Ass Shield?\u003c\/strong\u003e …Well then this kit is just what you're looking for.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395663405376,"sku":"8022611-4CRYSTAL","price":19.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395663438144,"sku":"8022611-4ARMOR","price":21.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_24575282_13457372_1686938390_1_0_75d0dbb3-57fe-4c32-ac07-24860a4069ed.jpg?v=1693502762"},{"product_id":"smash-captain-kit-abramowicz-pm","title":"Smash Captain Kit - Abramowicz (PM)","description":"\u003cstrong\u003eAre you looking for a New \"Prime\" Marine (PM) Captain with a Jet Pack, a Big Hammer, and a Bad Ass Shield?\u003c\/strong\u003e …Well then this kit is just what you're looking for.\u003cbr\u003e\n\u003cbr\u003e\nThis kit was designed and curated by my good friend Adam Abramowicz from \u003cstrong\u003eThe Best General Podcast\u003c\/strong\u003e (\u003ca href=\"https:\/\/itunes.apple.com\/us\/podcast\/the-best-general-a-warhammer-40k-podcast\/id1287572795?mt=2\" rel=\"nofollow\"\u003eiTunes\u003c\/a\u003e\/\u003ca href=\"http:\/\/thebestgeneral.libsyn.com\/\" rel=\"nofollow\"\u003eRSS\u003c\/a\u003e). In fact putting these Smash Captain Kits was his idea. When you have some time, check out his podcast and follow him on \u003ca href=\"https:\/\/www.facebook.com\/TheBestGeneralPodcast\/\" rel=\"nofollow\"\u003eFacebook\u003c\/a\u003e. Adam designed his big shield to be blank so you can add your own insignia. …Might I suggest one of my \u003ca href=\"https:\/\/www.shapeways.com\/shops\/popbits?section=%5BBits%5D+Insignia+Sets\u0026amp;s=0\" rel=\"nofollow\"\u003elarge bent insignias.\u003c\/a\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395663307072,"sku":"8026303-4CRYSTAL","price":20.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395663339840,"sku":"8026303-4ARMOR","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_24586410_13462350_1686938390_1_0_ab1b2299-7619-4e0a-aa77-fde6282904cf.jpg?v=1693502751"},{"product_id":"smash-captain-kit-slothower-pm","title":"Smash Captain Kit: Slothower (PM)","description":"Are you looking for a New \"Prime\" Marine (PM) Captain with a Jet Pack, a Big Hammer, and a Bad Ass Shield? …Well then this kit is just what you're looking for.\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan style=\"font-size:14px\"\u003eThis kit was inspired by one of my best friends; Luke Slothower form \u003ca href=\"https:\/\/www.facebook.com\/skywalkerpainting\/?fb_dtsg_ag=Ady1Rsvdcydbp_g0geBucxwBK0YBot-LNRsgIo2Sy8bD9A%3AAdwWzc_x-uHho9eHrVs-qEIdREW6xEc3SzxUfoF47Y5Ulw\" rel=\"nofollow\"\u003e@SkywalkerPainting\u003c\/a\u003e . It was his first Space Wolf army back in the late 90's that got me into the 40k in the first place. I know I will never be as good of a painter as he is but, if he keeps painting form me, I'll be a happy guy.  \u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395662618944,"sku":"8022764-4CRYSTAL","price":20.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395662651712,"sku":"8022764-4ARMOR","price":23.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_24587733_13462889_1686938390_1_0_99942856-2a62-49d6-ad6d-34fb42518a92.jpg?v=1693502678"},{"product_id":"smash-captain-kit-boucher-pm","title":"Smash Captain Kit: Boucher (PM)","description":"Are you looking for a New \"Prime\" Marine (PM) Captain with a Jet Pack, a Big Hammer, and a Bad Ass Shield? …Well then this kit is just what you're looking for.\u003cbr\u003e\n\u003cbr\u003e\nThis kit was designed and curated by none other than the \u003cstrong\u003eBoucher Brothers\u003c\/strong\u003e; Kenny and David wanted a BA, which I assumed meant BAD ASS, Smash captain kits. You can find Kenny every week on \u003ca href=\"https:\/\/www.twitch.tv\/next_level_painting\" rel=\"nofollow\"\u003eTwitch\u003c\/a\u003e or listen to him on \u003ca href=\"http:\/\/thelongwar.libsyn.com\/podcast\" rel=\"nofollow\"\u003ethe Long War Podcast\u003c\/a\u003e where ever you get your media from. Please take some time, check out his page on \u003ca href=\"https:\/\/www.facebook.com\/nextlevelpainting\/\" rel=\"nofollow\"\u003eFacebook\u003c\/a\u003e as well. \u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395660783936,"sku":"8048780-4CRYSTAL","price":19.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395660816704,"sku":"8048780-4ARMOR","price":21.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_24667271_13490402_1686938391_1_0_76a1c56a-61a5-4d0b-9f0a-6b35569db300.jpg?v=1693502457"},{"product_id":"smash-captain-kit-salamander-pm","title":"Smash Captain Kit: Salamander (PM)","description":"Are you looking for a New \"Prime\" Marine (PM) Captain with a Jet Pack, a Big Hammer, and a Bad Ass Shield? …Well then this kit is just what you're looking for.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395660652864,"sku":"8048927-4CRYSTAL","price":24.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395660685632,"sku":"8048927-4ARMOR","price":31.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_24667575_13490580_1686938391_1_0_4053e236-4817-4a1a-bb82-8d976600a302.jpg?v=1693502443"},{"product_id":"chain-lord-kit-boucher-pm","title":"Chain Lord Kit: Boucher (PM)","description":"\u003cspan style=\"font-size:14px\"\u003e\u003cstrong\u003eFull Kit:\u003c\/strong\u003e (Large) Jetpack, 2 different Chain Swords, Helmet, and 2 Adjustable Arms (L\u0026amp;R)\u003cbr\u003e\n\u003cstrong\u003eSmall Kit:  \u003c\/strong\u003eJetpack and 2 different Chain Swords\u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cem\u003eSo you're looking for a New Chaos Lord with a Jetpack and 2 Bad Ass Chain Swords?\u003c\/em\u003e …Maybe one sword looks like it could be a Relic?  …Well then this kit is just what your looking for. This Chain Lord kit was coined by the one and only Kenny Boucher, of Next Level Painting and the Long War. Check out his \u003ca href=\"https:\/\/www.youtube.com\/channel\/UCTfnfIY3Kyxcv8sWck4sxvQ\" rel=\"nofollow\"\u003eYoutube channel \u003c\/a\u003efor the formula for this Beatstick Lord.\u003cbr\u003e\n\u003cbr\u003e\n\u003cem\u003ePLEASE NOTE:\u003c\/em\u003e This product was designed for the new Larger Space marine models and will not fit on the older style marine models properly.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP \/ Large","offer_id":49395618349376,"sku":"9047635-4CRYSTAL","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ Small","offer_id":49395618382144,"sku":"9047636-4CRYSTAL","price":19.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Small","offer_id":49395618414912,"sku":"9047636-4ARMOR","price":20.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Large","offer_id":49395618447680,"sku":"9047635-4ARMOR","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_27258083_14753405_1686938421_1_0.jpg?v=1693498292"},{"product_id":"thunder-lord-kit-boucher-pm","title":"Thunder Lord Kit: Boucher (PM)","description":"\u003cem\u003eSo you're looking for a New Chaos Lord with a Jetpack and a Thunder Hammer?\u003c\/em\u003e  …Well then this kit is just what you're looking for. This Thunder Lord kit was designed by Kenny Boucher, of Next Level Painting and the Long War. Check out his \u003ca href=\"https:\/\/www.youtube.com\/channel\/UCTfnfIY3Kyxcv8sWck4sxvQ\" rel=\"nofollow\"\u003eYoutube channel \u003c\/a\u003efor the formula for this Beatstick Lord.\u003cbr\u003e\n\u003cbr\u003e\n\u003cem\u003ePLEASE NOTE:\u003c\/em\u003e This product was designed for the new Larger Space marine models (PM) and will not fit on the older style marine models properly.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395604685120,"sku":"9170225-4CRYSTAL","price":20.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395604717888,"sku":"9170225-4ARMOR","price":21.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_27550902_14903474_1686938424_1_0_b00b4712-c819-4c73-99f8-a60ebd2b5efd.jpg?v=1693497684"},{"product_id":"thunder-lord-kit-base-pm","title":"Thunder Lord Kit: Base (PM)","description":"\u003cem\u003eSo you're looking for a New Chaos Lord with a Jetpack and a Thunder Hammer?\u003c\/em\u003e  …Well then this kit is just what your looking for. This product was designed for the new Larger Space marine models (PM) and will not fit on the older style marine models properly.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395597345088,"sku":"9170297-4CRYSTAL","price":17.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395597377856,"sku":"9170297-4ARMOR","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_27551151_14903546_1686938425_1_0_3a633a83-b6d0-4504-97cc-fe566975bd48.jpg?v=1693496687"},{"product_id":"nightmare-legionary-demon-lord-kit-1","title":"Nightmare : Legionary Demon Lord Kit 1","description":"\u003cp\u003eThis kit includes a Full Demon Lord Kit (makes a complete Demon Lord). All these parts fit together to make an articulated, Demon Prince-scaled model that you can pose as you wish. The kit includes: a full torso, a head, a jetpack and a set of legs, arms, pauldrons and vicious talons. \u003cmeta charset=\"utf-8\"\u003eAll you will need is a large Demon-Prince base like our \u003ca title=\"60mm Round Bases\" href=\"https:\/\/popgoesthemonkey.com\/collections\/scenery\/diameter_-60mm\"\u003eBlank : 60mm Round Bases.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003eThey are sold unpainted.\u003cbr\u003e\u003cbr\u003eNOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50435728572736,"sku":"20000737-4MR3","price":35.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395338019136,"sku":"10224474-4CRYSTAL","price":68.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395338051904,"sku":"10224474-4ARMOR","price":81.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_30566546_16299391_1686938452_1_0_83f27424-ab18-400c-b4c2-c0ee824aede7.jpg?v=1693464632"},{"product_id":"iron-heads-legionary-demon-lord-kit-1","title":"Iron Heads : Legionary Demon Lord Kit 1","description":"\u003cp\u003eThis kit includes a Full Demon Lord Kit (makes a complete Demon Lord). All these parts fit together to make an articulated, Demon Prince-scaled model that you can pose as you wish. The kit includes: a full torso, a head, a jetpack and a set of legs, arms, pauldrons and vicious talons. \u003cmeta charset=\"utf-8\"\u003eAll you will need is a large Demon-Prince base like our \u003ca title=\"60mm Round Bases\" href=\"https:\/\/popgoesthemonkey.com\/collections\/scenery\/diameter_-60mm\"\u003eBlank : 60mm Round Bases.\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003eThey are sold unpainted. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eNOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50435795419456,"sku":"20000739-4MR3","price":36.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395337920832,"sku":"10237582-4CRYSTAL","price":73.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395337953600,"sku":"10237582-4ARMOR","price":92.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_30566676_16299658_1686938452_1_0_0280204f-ecac-4f25-bc98-3493104b0e91.jpg?v=1693464621"},{"product_id":"iron-heads-legionary-demon-lord-kit-2","title":"Iron Heads : Legionary Demon Lord Kit 2","description":"\u003cp\u003eThis kit includes a Full Demon Lord Kit (makes a complete Demon Lord). All these parts fit together to make an articulated, Demon Prince-scaled model that you can pose as you wish. The kit includes: a full torso, a head, a jetpack and a set of legs, arms, pauldrons and vicious talons. \u003cmeta charset=\"utf-8\"\u003eAll you will need is a large Demon-Prince base like our \u003ca title=\"60mm Round Bases\" href=\"https:\/\/popgoesthemonkey.com\/collections\/scenery\/diameter_-60mm\"\u003eBlank : 60mm Round Bases.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003eThey are sold unpainted. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eNOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50435763503424,"sku":"20000738-4MR3","price":35.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395337789760,"sku":"10245148-4CRYSTAL","price":69.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395337822528,"sku":"10245148-4ARMOR","price":81.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_30567304_16299986_1686938452_1_0_44170448-3d3b-4f25-b499-85bf12bd1c81.jpg?v=1693464610"},{"product_id":"nighhtmare-legionary-demon-lord-kit-2","title":"Nightmare : Legionary Demon Lord Kit 2","description":"\u003cp\u003eThis kit includes a Full Demon Lord Kit (makes a complete Demon Lord). All these parts fit together to make an articulated, Demon Prince-scaled model that you can pose as you wish. The kit includes: a full torso, a head, a jetpack and a set of legs, arms, pauldrons and vicious talons. \u003cmeta charset=\"utf-8\"\u003eAll you will need is a large Demon-Prince base like our \u003ca title=\"60mm Round Bases\" href=\"https:\/\/popgoesthemonkey.com\/collections\/scenery\/diameter_-60mm\"\u003eBlank : 60mm Round Bases.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003eThey are sold unpainted. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eNOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50435745415488,"sku":"20000736-4MR3","price":35.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395337724224,"sku":"10245304-4CRYSTAL","price":71.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395337756992,"sku":"10245304-4ARMOR","price":91.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_30567425_16300037_1686938452_1_0_cf198683-50cc-43be-a3e5-1507f082acfc.jpg?v=1693464599"},{"product_id":"terminator-squad-kit-storm-wolf-tartaros","title":"Terminator Squad kit: Storm Wolf Tartaros","description":"\u003cem\u003eAre you looking to outfit a squad of Wolf Legion Terminators with Wall Shields and Blitz Bolters?\u003c\/em\u003e Then this kit of for you. You will get a set of 5 Tartaros Shoulder pads, 5 Terminator Wall Shields and 5 Saborclip Blitz Bolters. \u003cbr\u003e\n\u003cbr\u003e\nThis kit was inspired by one of my best friend; Luke Slothower form @SkywalkerPainting . It was his first Space Wolf army back in the late 90's that got me into the 40k in the first place. I know I will never be as good of a painter as he is but, if he keeps painting form me, I'll be a happy guy.  \u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP \/ NO Bolters","offer_id":49395272909120,"sku":"10522081-4CRYSTAL","price":40.25,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ Includes 5 Bolters","offer_id":50674393907520,"sku":"10522082-4CRYSTAL","price":49.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ NO Bolters","offer_id":49395272941888,"sku":"10522081-4ARMOR","price":44.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Includes 5 Bolters","offer_id":50674393940288,"sku":"10522082-4ARMOR","price":56.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_31450825_16663613_1686938482_1_0_fa8bb5d3-22d7-4c5e-bb54-78cf1778fe9d.jpg?v=1693458721"},{"product_id":"dark-priest-kit","title":"Dark Priest Kit","description":"So you're looking for a Dark Priest, wielding a wicked mace, flouting his allegiance to the Chaos Gods?  Well then this kit is just what you're looking for.\u003cbr\u003e\n\u003cbr\u003e\n\u003cem\u003ePLEASE NOTE:\u003c\/em\u003e This product was designed for the new Larger Space marine models and will not fit on the older style marine models properly.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395251413312,"sku":"9042771-4CRYSTAL","price":18.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395251446080,"sku":"9042771-4ARMOR","price":19.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_27246380_14747426_1686938421_1_0_dfc4ff2a-f376-4929-8efb-b002df613c91.jpg?v=1693456840"},{"product_id":"sven-storm-wolf-terminator","title":"Sven: Storm Wolf Terminator","description":"Let the storm rage! Sven Hugencocken leader of the Storm Wolf Terminators is ready for action.\u003cbr\u003e\n\u003cbr\u003e\n\u003cem\u003ePLEASE NOTE:\u003c\/em\u003e This product was designed for a Tartaros Terminator model. The kit also include a set of adjustable tartaros terminator arms.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395251315008,"sku":"10521597-4CRYSTAL","price":24.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395251347776,"sku":"10521597-4ARMOR","price":27.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_31448904_16662548_1686938482_1_0_6ca73b33-e935-4523-9f2a-d28c62356e04.jpg?v=1693456821"},{"product_id":"smash-captain-kit-ultra-legion-pm","title":"Smash Captain Kit - Ultra Legion (PM)","description":"So you're looking for the Ultimate Smash Captian; flestooned  with all manner of Ultimar adornments?  Well then this kit is just what you're looking for. \u003cbr\u003e\n\u003cbr\u003e\n\u003cem\u003ePLEASE NOTE:\u003c\/em\u003e This product was designed for the new Larger (Prime) Space marine models and will not fit on the older style marine models properly.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395250790720,"sku":"10109752-4CRYSTAL","price":27.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395250823488,"sku":"10109752-4ARMOR","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_30150090_16117033_1686938449_1_0_611b3f0c-6af6-4891-b96e-155695121ea4.jpg?v=1693456444"},{"product_id":"cult-manipulation-sorcerer","title":"Cult Manipulation Sorcerer","description":"This conversion kit includes a variety of bits from across the PGTM store, brought together on one sprue. It will allow you to create a one-of-a-kind character for your Kill Team or your Army. The kit is designed to accommodate MOST any marine model from the first-born, Primaris, 30k or Chaos space marine line.* Note: Base and marine model not included.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49394940313920,"sku":"12925128-4CRYSTAL","price":25.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394940346688,"sku":"12925128-4ARMOR","price":26.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_37746546_19996717_1686938647_1_0_04433e63-7ef1-4d26-b264-0383a4258475.jpg?v=1735425902"},{"product_id":"horcanz-heroes-kill-team-kit","title":"Horcanz Heroes : Kill Team Kit","description":"This  conversion kit includes 33 unique bits from across the PGTM store, to create a Ragtag  Orc Commandos Kill Team. You will just need to add these bits to a new  box of Orc Boyz*. The kit gives you all the bits you need to create each operative for a complete Kill team. Some of these weapon and  bits are designed for a specific models from the Orc Boyz* box (see Below), but depending on your hobby skill you can make them fit most any Orc model. This kit also includes several extra weapons and bits that will work with any of the other models in the box to carry the theme and round out your roster.\u003cbr\u003e\n\u003cbr\u003e\nThis kit  also includes 10 custom WW2-themed heads, a full Goblin and a full Bomb Squib models (Bases not included). Those parts were Sculpted by Freelance Artist: \u003ca href=\"https:\/\/www.cgtrader.com\/froglin-miniatures\" rel=\"nofollow\"\u003eFroglin Minis\u003c\/a\u003e - (STLs for these bits may be available at on the artist's linked page)  \u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eThis underground band of Orcey Heroes is lead by the cleaver and sneeky Colonel Horcanz. They spcialize in sabotaging the enemy by looting their best weapons and gear and turning them on their former owners. \u003c\/strong\u003eYou can read more about Horcanz and his heroes along with some further instructions on how to assemble this kill team at this link\u003cstrong\u003e (coming soon)\u003c\/strong\u003e. However,  below is a basic list of which bits are designed for which models in the box.\u003cbr\u003e\nOrc #3 = Comms Bits\u003cbr\u003e\nOrc #4 = Rocket Launcher Bits\u003cbr\u003e\nOrc #5 = Breacher Bits\u003cbr\u003e\nOrc #7 = Sniper Bits\u003cbr\u003e\nOrc #10\/11 = Flamer Bits\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49394938446144,"sku":"M12965737-4CRYSTAL","price":86.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394938478912,"sku":"M12965737-4ARMOR","price":99.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_37844639_20067569_1686938648_1_0_e251252e-bb40-400c-967c-d3ba2769835c.jpg?v=1735425866"},{"product_id":"base-orc-kill-team-weapons-bits","title":"Base Orc Kill Team Weapons \u0026 Bits","description":"This  set kit includes 19 unique weapons and bits that are needed to convert a new  box of Orc Boyz* box into a custom Orc Commandos Kill Team. The kit gives you all the basic bits needed to create each operative for a complete Kill team. Some of these weapon and  bits are designed for a specific models from the Orc Boyz* box (see Below), but depending on your hobby skill you can make them fit most any Orc model. This kit also includes several extra weapons and bits that will work with any of the other models in the box to carry the theme and round out your roster.\u003cbr\u003e\n\u003cbr\u003e\nThis is a basic list of which bits are designed for which models in the box.\u003cul\u003e\n\u003cli\u003eOrc #3 = Comms Bits\u003c\/li\u003e\n\u003cli\u003eOrc #4 = Rocket Launcher Bits\u003c\/li\u003e\n\u003cli\u003eOrc #5 = Breacher Bits\u003c\/li\u003e\n\u003cli\u003eOrc #7 = Sniper Bits\u003c\/li\u003e\n\u003cli\u003eOrc #10\/11 = Flamer Bits\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nYou can find further instructions on how to assemble this kill team with these parts at this link \u003cstrong\u003e(coming soon)\u003c\/strong\u003e.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49394938380608,"sku":"M12965729-4CRYSTAL","price":56.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394938413376,"sku":"M12965729-4ARMOR","price":64.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_37845089_20067985_1686938649_1_0.jpg?v=1735425864"},{"product_id":"leboom-bomb-squib","title":"LeBoom : Bomb Squib","description":"\u003cp\u003eThis mean little mouth of teeth and explosives will make a big impact on your enemies. A unique option for a Orc Commandos Kill Team, Orc army or for your next painting project. Note: Base is not included\u003cbr\u003e\u003cbr\u003eSculpted by Freelance Artist: \u003ca href=\"https:\/\/www.cgtrader.com\/froglin-miniatures\" rel=\"nofollow\"\u003eFroglin Minis \u003c\/a\u003e - (STLs for these bits may be available at on the artist's linked page)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50392538349888,"sku":"20000570-4MR3","price":16.0,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49394938315072,"sku":"12965731-4CRYSTAL","price":21.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394938347840,"sku":"12965731-4ARMOR","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_37845132_20068025_1686938649_1_0_44c34d67-e6f7-4599-84d9-fc625ebd2979.jpg?v=1735425860"},{"product_id":"horcanz-hero-goblin-jojo-grapple","title":"Horcanz Hero Goblin : Jojo Grapple","description":"\u003cp\u003eAs a part of Horcanz Heroes, Jojo was designed as Commando Goblin for a Orc Kill Team, but you could use him  in you orc army, scenery or your next painting project. Note: Base for the modle is not included.\u003cbr\u003e\u003cbr\u003eSculpted by Freelance Artist: \u003ca href=\"https:\/\/www.cgtrader.com\/froglin-miniatures\" rel=\"nofollow\"\u003eFroglin Minis​\u003c\/a\u003e- (STLs for these bits may be available at on the artist's linked page) \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50392547295552,"sku":"20000571-4MR3","price":13.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49394938249536,"sku":"12965732-4CRYSTAL","price":16.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394938282304,"sku":"12965732-4ARMOR","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_37845174_20068051_1686938649_1_0_0a13cb6f-777d-4f45-9ffe-bdde8c207bcb.jpg?v=1735425858"},{"product_id":"brewguzzla-s-buccaneers-kill-team-kit","title":"Brewguzzla's Buccaneers : Kill Team Kit","description":"This  conversion kit includes 47 unique bits from across the PGTM store, to create a Freebooter-style, Orc Commandos Kill Team. You will just need to add these bits to a new  box of Orc Boyz*. The kit gives you all the bits you need to create each operative for a complete Kill team. Some of these weapon and  bits are designed for a specific models from the Orc Boyz* box (see Below), but depending on your hobby skill you can make them fit most any Orc model. This kit also includes several extra weapons and bits that will work with any of the other models in the box to carry the theme and round out your roster.\u003cbr\u003e\n\u003cbr\u003e\nThis kit  also includes 10 custom pirate-themed heads, a full Goblin and a full Bomb Squib models (Bases not included). Those parts were Sculpted by Freelance Artist: \u003ca href=\"https:\/\/cults3d.com\/en\/users\/JoshButIn3D\/creations\" rel=\"nofollow\"\u003eJoshButin3D\u003c\/a\u003e  - (STLs for these bits may be available at on the artist's linked page)  \u003cbr\u003e\n\u003cbr\u003e\n\u003cem\u003e\u003cstrong\u003eThe salty crew of Kaptin Gorgrok Brewguzzla (known as ‘Ol Scrapbeard by his lads) are always in the mood for a good Scrap, especially when theres some flashy loot to be nicked. \u003c\/strong\u003e\u003c\/em\u003eYou can read more about ‘Ol Scrapbeard and his crew, along with some further instructions on how to assemble this kill team at this link \u003cstrong\u003e(coming soon).\u003c\/strong\u003e However,  below is a basic list of which bits are designed for which models in the box.\u003cul\u003e\n\u003cli\u003eOrc #3 = Comms Bits\u003c\/li\u003e\n\u003cli\u003eOrc #4 = Rocket Launcher Bits\u003c\/li\u003e\n\u003cli\u003eOrc #5 = Breacher Bits\u003c\/li\u003e\n\u003cli\u003eOrc #7 = Sniper Bits\u003c\/li\u003e\n\u003cli\u003eOrc #10\/11 = Flamer Bits\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49394938118464,"sku":"M12965718-4CRYSTAL","price":119.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394938151232,"sku":"M12965718-4ARMOR","price":139.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_37844477_20067367_1686938648_1_0_6951ac26-5499-4baa-8aef-ec3475314fe7.jpg?v=1735425854"},{"product_id":"buccaneer-killteam-parts","title":"Buccaneer : KillTeam Parts","description":"These 15 unique buccaner style  weapons and bits to add to a Orc Commandos Kill Team. Add these to a orc Commandos  or a new  box of Orc Boyz*to give them a piraticall feel. The kit inclued 5 Cutlasses, 4 Pirated Pistols, 2 peg legs, a boss pole, parrot squig, Anchor Breacher and a human skull. These ca be used  you for the Nob, Breacher, Slasher and Comms operative, as-well-as bits for the rest of your roster. Some of these weapon and  bits are designed for a specific models from the Orc Boyz* box (see Below), but depending on your hobby skill you can make them fit most any Orc model.   \u003cbr\u003e\n\u003cbr\u003e\nHere is a list of which bits are designed for which models in the Orc Boys box.\u003cbr\u003e\nOrc #3 = Comms Bits\u003cbr\u003e\nOrc #5 = Breacher Bits\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49394938052928,"sku":"12965722-4CRYSTAL","price":36.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394938085696,"sku":"12965722-4ARMOR","price":41.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_37844705_20067625_1686938648_1_0_30cd39d5-7022-445b-b8f6-54ca88f31b51.jpg?v=1735425853"},{"product_id":"orc-buccaneer-cabin-boy-urzog","title":"Orc Buccaneer Cabin Boy : Urzog","description":"\u003cp\u003eAs a part of Kaptin Gorgrok Brewguzzla freebooter crew, Urzog was designed as Commando Goblin for a Orc Kill Team, but you could use him for just the right salty feel. \u003cbr\u003e\u003cbr\u003eSculpted by Freelance Artist: \u003ca href=\"https:\/\/cults3d.com\/en\/users\/JoshButIn3D\/creations\" rel=\"nofollow\"\u003eJoshButin3D\u003c\/a\u003e- (STLs for these bits may be available at on the artist's linked page) \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50392562827584,"sku":"20000572-4MR3","price":14.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49394937954624,"sku":"12965724-4CRYSTAL","price":17.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394937987392,"sku":"12965724-4ARMOR","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_37844699_20067663_1686938648_1_0_36b1546b-82ed-4f84-83b2-8bd995cb7e1b.jpg?v=1735425851"},{"product_id":"puffer-robo-squid-32mm","title":"Puffer : Robo-Squib (32mm)","description":"\u003cp\u003e\"Dis lil' squid gotta real short fuse. Best point him at da enemy and watch the sparks fly.\"\u003cem\u003e \u003c\/em\u003e\u003cstrong\u003e- Kaptin Gorgrok Brewguzzla\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis full model is designed to be added to your orc kill team or mob to fill in your ranks with some unique figures or can be used for a one-of-a-kind bomb runner. This little guys will fit on a 32mm base and are roughly 30mm wide, 30mm deep \u0026amp; 33mm tall. Round bases are not included.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50282992238912,"sku":"20000186-4MR3","price":16.0,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49394937856320,"sku":"12965726-4CRYSTAL","price":25.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394937889088,"sku":"12965726-4ARMOR","price":28.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_37844994_20067915_1686938648_1_0_32734424-d4fb-4a74-a30b-f4164a0e6c0f.jpg?v=1735425849"},{"product_id":"10x-buccaneer-orc-head-swaps","title":"10x Buccaneer : Orc Head Swaps","description":"\u003cp\u003eThis set of orc heads are a perfect fit for your freebooter army or Kill team. In fact, this is Kaptin Gorgrok Brewguzzla, aka ‘Ol Scrapbeard, and his salty Kill Team crew.  These heads were designed for our Buccaneer kill team kit by the by Freelance Artist: \u003ca rel=\"nofollow\" href=\"https:\/\/cults3d.com\/en\/users\/JoshButIn3D\/creation\"\u003eJoshButin3D\u003c\/a\u003e- (STLs for these bits may be available at on the artist's linked page)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49394937692480,"sku":"12965727-4CRYSTAL","price":18.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394937725248,"sku":"12965727-4ARMOR","price":19.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_37845030_20067947_1686938649_1_0_68542b8b-012c-41b5-82ed-18bc68112d7f.jpg?v=1693429578"},{"product_id":"10x-horcanz-heros-orc-head-swaps","title":"10x Horcanz Heros: Orc Head Swaps","description":"\u003cp\u003eThis set of orc heads are a perfect fit for your Orc Commandos Kill team or for a unique WW2 feel for your orc army. In fact, this is Col. Horcanz and his Heroes.  These heads were designed for our orc commandos kill team kit by the by Freelance Artist: \u003ca href=\"https:\/\/www.cgtrader.com\/froglin-miniatures\" rel=\"nofollow\"\u003eFroglin Minis\u003c\/a\u003e - (STLs for these bits may be available at on the artist's linked page)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49394937626944,"sku":"12965733-4CRYSTAL","price":18.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394937659712,"sku":"12965733-4ARMOR","price":18.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_37845184_20068083_1686938649_1_0_71680cb3-38ab-4695-8b27-716203292de2.jpg?v=1735425848"},{"product_id":"character-kit-lt-boushugi","title":"Character Kit: Lt. Boushugi","description":"This conversion kit includes a variety of bits from across the PGTM store, brought together on one sprue. It will allow you to create a one-of-a-kind character for your Chapter or your D-Watch Army. The kit is designed to fit a random model from the new Prime Marine or Chaos Marine line.* Though the parts very, each kit come with a full set of adjustable arms, 2 full sets of shoulder pads (One specifically prepared for DW), a head swap, a backpack (either standard or jet pack), knee\/shin insignia, and weapon load outs (Melee, Ranged and\/or Shield). The preview photo shows you what the sprue will look like.  – Note: Base marine model not included.  \u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49394473206080,"sku":"11560750-4CRYSTAL","price":24.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394473271616,"sku":"11560750-4ARMOR","price":25.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_40210789_18089688_1691865220_1_0.jpg?v=1735425127"},{"product_id":"character-kit-captain-barticus","title":"Character Kit: Captain Barticus","description":"This conversion kit includes a variety of bits from across the PGTM store, brought together on one sprue. It will allow you to create a one-of-a-kind character for your Chapter or your D-Watch Army. The kit is designed to fit a random model from the new Prime Marine or Chaos Marine line.* Though the parts very, each kit come with a full set of adjustable arms, 2 full sets of shoulder pads (One specifically prepared for DW), a head swap, a backpack (either standard or jet pack), knee\/shin insignia, and weapon load outs (Melee, Ranged and\/or Shield). The preview photo shows you what the sprue will look like.  – Note: Base marine model not included.  \u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49394472943936,"sku":"10655679-4CRYSTAL","price":30.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394472976704,"sku":"10655679-4ARMOR","price":33.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_31939548_16908543_1686938494_1_0_6489e84e-0197-4fdb-a055-494f72efad03.jpg?v=1735425126"},{"product_id":"character-kit-captain-akia","title":"Character Kit: Captain Akia","description":"\u003cp\u003eThis conversion kit includes a variety of bits from across the PGTM store, brought together on one sprue. It will allow you to create a one-of-a-kind character for your Chapter or your D-Watch Army. The kit is designed to fit a random model from the new Prime Marine or Chaos Marine line.* Though the parts very, each kit come with a full set of adjustable arms, 2 full sets of shoulder pads (One specifically prepared for DW), a head swap, a backpack (either standard or jet pack), knee\/shin insignia, and weapon load outs (Melee, Ranged and\/or Shield). The preview photo shows you what the sprue will look like.  – Note: Base marine model not included.  \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":46157444055360,"sku":"10658620-4CRYSTAL","price":23.49,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":46551966843200,"sku":"10658620-4ARMOR","price":28.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_31951777_16914999_1686938494_1_0_8958b2d1-7c0c-4a54-befd-2fbf2dd19e91.jpg?v=1693425568"},{"product_id":"character-kit-lieutenant-xoebek","title":"Character Kit: Lieutenant Xoebek","description":"This conversion kit includes a variety of bits from across the PGTM store, brought together on one sprue. It will allow you to create a one-of-a-kind character for your Chapter or your D-Watch Army. The kit is designed to fit a random model from the new Prime Marine or Chaos Marine line.* Though the parts very, each kit come with a full set of adjustable arms, 2 full sets of shoulder pads (One specifically prepared for DW), a head swap, a backpack (either standard or jet pack), knee\/shin insignia, and weapon load outs (Melee, Ranged and\/or Shield). The preview photo shows you what the sprue will look like.  – Note: Base marine model not included.  \u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49394472878400,"sku":"10655670-4CRYSTAL","price":21.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394472911168,"sku":"10655670-4ARMOR","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_31951971_16915103_1686938494_1_0_7b9cd03b-1942-4f59-b0ae-bf1fa508a9f6.jpg?v=1735425124"},{"product_id":"character-kit-lieutenant-ragnesson","title":"Character Kit: Lieutenant Ragnesson","description":"This conversion kit includes a variety of bits from across the PGTM store, brought together on one sprue. It will allow you to create a one-of-a-kind character for your Chapter or your D-Watch Army. The kit is designed to fit a random model from the new Prime Marine or Chaos Marine line.* Though the parts very, each kit come with a full set of adjustable arms, 2 full sets of shoulder pads (One specifically prepared for DW), a head swap, a backpack (either standard or jet pack), knee\/shin insignia, and weapon load outs (Melee, Ranged and\/or Shield). The preview photo shows you what the sprue will look like.  – Note: Base marine model not included.  \u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49394472780096,"sku":"10655669-4CRYSTAL","price":24.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394472812864,"sku":"10655669-4ARMOR","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_31952029_16915126_1686938494_1_0_27ba3635-dcdd-44c8-b862-9993933c5491.jpg?v=1735425123"},{"product_id":"character-kit-watch-master-norbanus","title":"Character Kit: Watch Master Norbanus","description":"This conversion kit includes a variety of bits from across the PGTM store, brought together on one sprue. It will allow you to create a one-of-a-kind character for your Chapter or your D-Watch Army. The kit is designed to fit a random model from the new Prime Marine or Chaos Marine line.* Though the parts very, each kit come with a full set of adjustable arms, 2 full sets of shoulder pads (One specifically prepared for DW), a head swap, a backpack (either standard or jet pack), knee\/shin insignia, and weapon load outs (Melee, Ranged and\/or Shield). The preview photo shows you what the sprue will look like.  – Note: Base marine model not included.  \u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e  \u003cbr\u003e \u003cbr\u003e *NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49394472649024,"sku":"10655668-4CRYSTAL","price":22.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394472681792,"sku":"10655668-4ARMOR","price":24.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_31952132_16915184_1686938494_1_0_18705ab3-4589-49e7-af68-44a95999a605.jpg?v=1735425121"},{"product_id":"character-kit-captian-regulos","title":"Character Kit: Captian Regulos","description":"This conversion kit includes a variety of bits from across the PGTM store, brought together on one sprue. It will allow you to create a one-of-a-kind character for your Chapter or your D-Watch Army. The kit is designed to fit a random model from the new Prime Marine or Chaos Marine line.* Though the parts very, each kit come with a full set of adjustable arms, 2 full sets of shoulder pads (One specifically prepared for DW), a head swap, a backpack (either standard or jet pack), knee\/shin insignia, and weapon load outs (Melee, Ranged and\/or Shield). The preview photo shows you what the sprue will look like.  – Note: Base marine model not included.  \u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eMonkey Resin\u003c\/strong\u003e (Coming Soon)\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49394472485184,"sku":"10654338-4CRYSTAL","price":26.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394472517952,"sku":"10654338-4ARMOR","price":28.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_31952240_16915263_1686938494_1_0_6e7c509b-369e-4d44-acee-dcf4610f8c09.jpg?v=1735425120"},{"product_id":"hell-raiser-terminator-praetor","title":"Saturnus Terminator : Hell Raiser Praetor","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eThis Hell Raiser Praetor\u003c\/strong\u003e boldly challenges his enemies across the battlefield as a champion of arrogance and intimidation. Clad in ancient Mk3 Saturnus-Pattern Terminator Armor, now twisted by the whims of the Dark Prince of Excess. This armor style features a carapace-mounted Blitz-Bolter, ideally suited for a dual-wielding martial weapons expert. \u003cmeta charset=\"utf-8\"\u003eOur customers have found this model to be well suited for a Lord or Sorcerer in Terminator Armor proxy. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis terminator model comes with the following weapons options:\u003c\/strong\u003e a two-handed Flensing Spear, Phoenican Roto-Halbard (great Chainfist stand-in), a set of Power Claws, and a full set of carapace-mounted Combo-Bolters (Blitz, Plasma, Flame \u0026amp; Thermo). \u003cspan\u003eBase is Not Included.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eThese models were sculpted by our Sanctioned Artist: KarnageKing. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3 \/ Helmed","offer_id":50285022511424,"sku":"20000207-4MR3","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3 \/ No Helm","offer_id":50285219021120,"sku":"20000208-4MR3","price":25.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-HellRaiser-Champ1-MR3_b6b44ad8-9a1c-48c2-829c-0acbae32ba81.png?v=1739656719"},{"product_id":"blood-butcher-terminator-champion","title":"Saturnus Terminator : Blood Butcher Champion","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eThis Blood Butcher Champion\u003c\/strong\u003e boldly challenges his enemies across the battlefield as a champion of slaughter and mayham. Clad in ancient, blood soaked, Mk1 Saturnus-Pattern Armor that has been gifted by the lord of skulls. This armor style features a simple one piece torso, with 2 pin holes under each massive shoulder pads for each arm. \u003cmeta charset=\"utf-8\"\u003eOur customers have found this model to be well suited for a Lord or Champion in Terminator Armor proxy. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe Terminator model comes with the following weapons options:\u003c\/strong\u003e a Warp Sword, Atrocity Hammer, a pair of Energy Talons, a pair of Terminator Roto-Axe, \u003cmeta charset=\"utf-8\"\u003ea pair of Kadaka Power Axes, a Chain-Talon, two Blitz-bolters (L\u0026amp;R) and a Plasma-bolter. \u003cspan\u003eBase is Not Included.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eThese models were sculpted by our Sanctioned Artist: \u003cstrong\u003eKarnageKing\u003c\/strong\u003e. Painted model photo courteous of Andrew Greystone.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3 \/ Commanding","offer_id":50285811007808,"sku":"20000209-4MR3","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3 \/ Running","offer_id":50285811040576,"sku":"20000210-4MR3","price":25.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-BloodButcher-Champ1-MR3.png?v=1739670188"},{"product_id":"brewguzzlas-buccaneers-kill-team-kit","title":"Brewguzzla's Buccaneers : Kill Team Kit","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cem\u003eThe salty crew of Kaptin Gorgrok Brewguzzla (known as ‘Ol Scrapbeard by his lads) are always in the mood to nick some flashy loot and run a uman through. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis conversion kit includes 47 unique bits to create a Freebooter-style, Orc Commandos Kill Team.\u003c\/strong\u003e You will just need to add a new box of \u003ca rel=\"noopener\" title=\"Orc Box\" href=\"https:\/\/www.warhammer.com\/en-US\/shop\/ork-boyz-combat-patrol-2022?queryID=d1e31fbb7467a09535fe318729854267\" target=\"_blank\"\u003eOrc Boyz* (mono-pose).\u003c\/a\u003e This kit gives you all the bits you need to conver those Boyz into each operative for a complete Commando Kill team. Some of these weapon and bits are designed for a specific models from the Orc Boyz* box (see Below), but depending on your hobby skill you can make them fit most any Orc model. This kit also includes several extra weapons and bits that will work with any of the other models in the box to carry the theme and round out your roster. \u003cbr\u003e\u003cbr\u003eThis kit also includes 10 custom pirate-themed heads, a full Goblin and a full Bomb Squib models (Bases not included). Those parts were Sculpted by Freelance Artist: \u003ca rel=\"noopener\" title=\"Link to Artist Site\" href=\"https:\/\/cults3d.com\/en\/users\/JoshButIn3D\/creations\" target=\"_blank\"\u003eJoshButin3D\u003c\/a\u003e - (STLs for these bits may be available at on the artist's linked page) \u003cbr\u003e\u003cbr\u003e(Orc #3 = Comms Bits \/ Orc #4 = Rocket Launcher Bits \/ Orc #5 = Breacher Bits \/ Orc #7 = Sniper Bits \/ Orc #10 or #11 = Flamer Bits) \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information. \u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50333836542272,"sku":"20000395-4MR3","price":33.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-Full_Buccaneer-KillTeam_Parts.png?v=1740672333"},{"product_id":"horcans-heros-kill-team-kit","title":"Horcan's Heroes : Kill Team Kit","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cem\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eThis underground band of Orcey Heroes are lead by the cleaver and sneaky Colonel Rober Horcan. They specialize in sabotaging the enemy by looting their best weapons and gear and turning them on their former owners.\u003c\/span\u003e \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis conversion kit includes 33 unique bits to create a Ragtag, WW2 themed Orc Commandos Kill Team.\u003c\/strong\u003e You will just need to add a new box of \u003ca rel=\"noopener\" title=\"Orc Box\" href=\"https:\/\/www.warhammer.com\/en-US\/shop\/ork-boyz-combat-patrol-2022?queryID=d1e31fbb7467a09535fe318729854267\" target=\"_blank\"\u003eOrc Boyz* (mono-pose).\u003c\/a\u003e This kit gives you all the bits you need to convert those Boyz into each operative for a complete Commando Kill team. Some of these weapon and bits are designed for a specific models from the Orc Boyz* box (see Below), but depending on your hobby skill you can make them fit most any Orc model. This kit also includes several extra weapons and bits that will work with any of the other models in the box to carry the theme and round out your roster. \u003cbr\u003e\u003cbr\u003eThis kit also includes 10 custom WW2-themed heads, a full Goblin and a full Bomb Squib models (Bases not included). Those parts were Sculpted by Freelance Artist: \u003ca rel=\"noopener\" title=\"Link to the artist's website\" href=\"https:\/\/www.troglodyte.se\/\" target=\"_blank\"\u003e\u003cspan\u003eFroglin Minis\u003c\/span\u003e\u003c\/a\u003e - (STLs for these bits may be available at on the artist's linked page) \u003cbr\u003e\u003cbr\u003e(Orc #3 = Comms Bits \/ Orc #4 = Rocket Launcher Bits \/ Orc #5 = Breacher Bits \/ Orc #7 = Sniper Bits \/ Orc #10 or #11 = Flamer Bits) \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information. \u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50334047437120,"sku":"20000396-4MR3","price":28.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-Core_HorcansHeroes-KillTeam_Parts.png?v=1740676229"}],"url":"https:\/\/popgoesthemonkey.com\/en-jp\/collections\/character-kit\/parts_-squad-teams.oembed","provider":"Pop Goes the Monkey","version":"1.0","type":"link"}