{"title":"Custom Full Models","description":"","products":[{"product_id":"nightmare-legionary-demon-lord-kit-1","title":"Nightmare : Legionary Demon Lord Kit 1","description":"\u003cp\u003eThis kit includes a Full Demon Lord Kit (makes a complete Demon Lord). All these parts fit together to make an articulated, Demon Prince-scaled model that you can pose as you wish. The kit includes: a full torso, a head, a jetpack and a set of legs, arms, pauldrons and vicious talons. \u003cmeta charset=\"utf-8\"\u003eAll you will need is a large Demon-Prince base like our \u003ca title=\"60mm Round Bases\" href=\"https:\/\/popgoesthemonkey.com\/collections\/scenery\/diameter_-60mm\"\u003eBlank : 60mm Round Bases.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003eThey are sold unpainted.\u003cbr\u003e\u003cbr\u003eNOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50435728572736,"sku":"20000737-4MR3","price":35.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395338019136,"sku":"10224474-4CRYSTAL","price":68.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395338051904,"sku":"10224474-4ARMOR","price":81.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_30566546_16299391_1686938452_1_0_83f27424-ab18-400c-b4c2-c0ee824aede7.jpg?v=1693464632"},{"product_id":"iron-heads-legionary-demon-lord-kit-1","title":"Iron Heads : Legionary Demon Lord Kit 1","description":"\u003cp\u003eThis kit includes a Full Demon Lord Kit (makes a complete Demon Lord). All these parts fit together to make an articulated, Demon Prince-scaled model that you can pose as you wish. The kit includes: a full torso, a head, a jetpack and a set of legs, arms, pauldrons and vicious talons. \u003cmeta charset=\"utf-8\"\u003eAll you will need is a large Demon-Prince base like our \u003ca title=\"60mm Round Bases\" href=\"https:\/\/popgoesthemonkey.com\/collections\/scenery\/diameter_-60mm\"\u003eBlank : 60mm Round Bases.\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003eThey are sold unpainted. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eNOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50435795419456,"sku":"20000739-4MR3","price":36.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395337920832,"sku":"10237582-4CRYSTAL","price":73.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395337953600,"sku":"10237582-4ARMOR","price":92.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_30566676_16299658_1686938452_1_0_0280204f-ecac-4f25-bc98-3493104b0e91.jpg?v=1693464621"},{"product_id":"iron-heads-legionary-demon-lord-kit-2","title":"Iron Heads : Legionary Demon Lord Kit 2","description":"\u003cp\u003eThis kit includes a Full Demon Lord Kit (makes a complete Demon Lord). All these parts fit together to make an articulated, Demon Prince-scaled model that you can pose as you wish. The kit includes: a full torso, a head, a jetpack and a set of legs, arms, pauldrons and vicious talons. \u003cmeta charset=\"utf-8\"\u003eAll you will need is a large Demon-Prince base like our \u003ca title=\"60mm Round Bases\" href=\"https:\/\/popgoesthemonkey.com\/collections\/scenery\/diameter_-60mm\"\u003eBlank : 60mm Round Bases.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003eThey are sold unpainted. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eNOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50435763503424,"sku":"20000738-4MR3","price":35.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395337789760,"sku":"10245148-4CRYSTAL","price":69.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395337822528,"sku":"10245148-4ARMOR","price":81.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_30567304_16299986_1686938452_1_0_44170448-3d3b-4f25-b499-85bf12bd1c81.jpg?v=1693464610"},{"product_id":"nighhtmare-legionary-demon-lord-kit-2","title":"Nightmare : Legionary Demon Lord Kit 2","description":"\u003cp\u003eThis kit includes a Full Demon Lord Kit (makes a complete Demon Lord). All these parts fit together to make an articulated, Demon Prince-scaled model that you can pose as you wish. The kit includes: a full torso, a head, a jetpack and a set of legs, arms, pauldrons and vicious talons. \u003cmeta charset=\"utf-8\"\u003eAll you will need is a large Demon-Prince base like our \u003ca title=\"60mm Round Bases\" href=\"https:\/\/popgoesthemonkey.com\/collections\/scenery\/diameter_-60mm\"\u003eBlank : 60mm Round Bases.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003eThey are sold unpainted. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eNOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50435745415488,"sku":"20000736-4MR3","price":35.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395337724224,"sku":"10245304-4CRYSTAL","price":71.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395337756992,"sku":"10245304-4ARMOR","price":91.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_30567425_16300037_1686938452_1_0_cf198683-50cc-43be-a3e5-1507f082acfc.jpg?v=1693464599"},{"product_id":"big-rona-2020-mega-robo-squib-60mm","title":"Big Rona : Mega Robo-Squib (60mm)","description":"\u003cp\u003eThis \u003cb\u003eMega Robo-Squid\u003c\/b\u003e\u003cstrong\u003e \"Big Rona\"\u003c\/strong\u003e is a full model kit that \u003cmeta charset=\"utf-8\"\u003ecan be a great substitute for a killa Kan or possibly a Deff Dread. It measures \u003cmeta charset=\"utf-8\"\u003eroughly 60mm wide, 58mm deep \u0026amp; 50mm tall (60-65mm tall with weapon).\u003c\/p\u003e\n\u003cp\u003eIt comes with 4 weapon options: Flamer Thrower, Rocket Launcher, Heavy Machine Gun and a Junk Bazooka that can be swapped on and off the with ease. Big Rona uses [5] mini magnets that fit into holes provided on the weapons and weapon mount. This Mega Robo-Squib fits nicely on a 60mm base, however we do not include on in this kit. The base  shown in the photo is from \u003ca rel=\"noopener\" title=\"Link to bases\" href=\"https:\/\/www.elrikshobbies.com\/\" target=\"_blank\"\u003eElrik's Hobbies\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003eNote: Magnets Needed: Four 4mm wide x 5mm tall and One 6mm wide x 2mm tall\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin","offer_id":32135866351718,"sku":"20000117-4MR3","price":40.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-BigRona-MR3.png?v=1737141814"},{"product_id":"boomer-robo-squib-32mm","title":"Boomer : Robo-Squib (32mm)","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e\u003cstrong\u003e“Deez crazy lil’botz are gunna be big Hittas, Bittas en Boomas!”\u003c\/strong\u003e \u003c\/span\u003e\u003cem\u003e—Loota Polooza\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis full model is designed to be added to your orc mob to fill in your ranks with some unique figures or can be used for a one-of-a-kind bomb runner. \u003c\/span\u003e\u003cem\u003eThis little guys will fit on a 32mm base and are roughly 28mm wide, 27mm deep and  27mm tall. ​\u003c\/em\u003e\u003cspan\u003eRound bases are not included.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3 \/ 1 Robo-Squib","offer_id":50283015274816,"sku":"20000188-4MR3","price":14.5,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3 \/ 2 Robo-Squibs","offer_id":50283015307584,"sku":"20000189-4MR3","price":21.0,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3 \/ 4 Robo-Squibs","offer_id":50283015340352,"sku":"20000190-4MR3","price":30.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 1 Robo-Squib","offer_id":49395184271680,"sku":"11013472-4CRYSTAL","price":22.25,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 2 Robo-Squibs","offer_id":49395184304448,"sku":"11013560-4CRYSTAL","price":33.75,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 4 Robo-Squibs","offer_id":49395184337216,"sku":"11013561-4CRYSTAL","price":57.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 1 Robo-Squib","offer_id":49395184402752,"sku":"11013472-4ARMOR","price":24.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 2 Robo-Squibs","offer_id":49395184435520,"sku":"11013560-4ARMOR","price":38.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 4 Robo-Squibs","offer_id":49395184468288,"sku":"11013561-4ARMOR","price":68.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_32775460_17336371_1686938512_1_0_c024986a-c393-4a0b-8aa1-9406340399f4.jpg?v=1693453392"},{"product_id":"grossblum-plague-demon-lord","title":"Grossblum : Demon Plague Lord","description":"\u003cp\u003e\u003cem\u003e\"Behold; the hopelessness of doubt, \u003cmeta charset=\"utf-8\"\u003ethe stench of fear,\u003cspan\u003e \u003c\/span\u003ethe cloud of FLIES! This is your moment of death and our requisite feast of plenty\"\u003c\/em\u003e \u003cstrong\u003e- Grossblum the Lord of Flies. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit includes 7 pieces that make a Full Demon Prince-scaled model. The kit includes a full torso, a set of insect-like wings and 5 weapon options. These options include a set of demon talons, two right-handed sword options, and a left-handed claw with a spewer weapon. \u003cmeta charset=\"utf-8\"\u003eAll you will need is a large Demon-Prince base like our \u003ca title=\"60mm Round Bases\" href=\"https:\/\/popgoesthemonkey.com\/collections\/scenery\/diameter_-60mm\"\u003eBlank : 60mm Round Bases.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit was designed and sculpted by the free-blade artist, \u003ca title=\"Karnage King's store\" href=\"https:\/\/cults3d.com\/en\/users\/KarnageKing\/creations\" target=\"_blank\"\u003eKarnageKing.\u003c\/a\u003e \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eNOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":32245760458854,"sku":"20000084-4MR3","price":40.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-Groosblume-MR3-1.png?v=1736284396"},{"product_id":"3x-base-blight-shroud-terminators","title":"Blight Shroud Terminators","description":"\u003cp\u003eThe \u003cstrong\u003eBlight Shroud Terminators\u003c\/strong\u003e are old and wear the Saturnus-Pattern Armor, but are now corrupted by the lord death and decay. They were designed and sculpted by the free-blade artist, \u003ca rel=\"noopener noreferrer\" title=\"Karnage King creations\" href=\"https:\/\/cults3d.com\/en\/users\/KarnageKing\/creations\" target=\"_blank\"\u003eKarnageKing.\u003c\/a\u003e \u003cspan data-mce-fragment=\"1\"\u003eThese models do not come with bases. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring that all components remain secure during transportation and minimizing the need for extra labor costs for removal. Most parts can be easily removed by hand; however, some may require snippers or a hobby knife for a cleaner detachment. Please be sure to use sharp tools carefully to avoid injury. All products are pre-cleaned and ready for primer and paint once removed. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3 \/ 3 Pack","offer_id":32270953218150,"sku":"20000017-4MR3","price":35.5,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3 \/ 6 Pack","offer_id":49960158232896,"sku":"20000018-4MR3","price":50.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-BlightShroudSaturnus-3-MR3_08465b06-48f0-4726-9595-7af3c1a921d3.png?v=1735861434"},{"product_id":"base-sonic-obliteration-hulk","title":"Base : Sonic Obliteration Hulk","description":"\u003cp\u003eThe dark powers of excess have brought forth this Hulk of Obliteration to blast sonic destruction across the galaxy. Chaos can twist the mind, flesh and metal, but so can our free-blade artist, \u003ca href=\"https:\/\/cults3d.com\/en\/users\/KarnageKing\/creations\"\u003eKarnageKing\u003c\/a\u003e how brought this model to life. The torsos is one piece, with 2 pin to attach each arm at the shoulder. Additional arms and weapons options are sold separately.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin","offer_id":39333436981350,"sku":"20000113-4MR3","price":25.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-SonicOblitHulk_01a_51eb2ba6-e134-448e-8762-8db1dd98e763.png?v=1737137847"},{"product_id":"winged-claw-sonic-obliteration-hulk","title":"Winged Claw : Sonic Obliteration Hulk","description":"\u003cp\u003eThe dark powers of excess have brought forth this Hulk of Obliteration to blast sonic destruction across the galaxy. Chaos can twist the mind, flesh and metal, but so can our free-blade artist, \u003ca href=\"https:\/\/cults3d.com\/en\/users\/KarnageKing\/creations\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eKarnageKing\u003c\/a\u003e how brought this model to life. The torsos is one piece, with 2 pin to attach each arm at the shoulder. Additional arms and weapons options are sold separately.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":39333437636710,"sku":"20000116-4MR3","price":25.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-SonicOblitHulk_1WingClaw.png?v=1737137475"},{"product_id":"hedonists-sonic-obliteration-hulk","title":"Hedonists : Sonic Obliteration Hulk","description":"\u003cp\u003eThe dark powers of excess have brought forth this Hulk of Obliteration to blast sonic destruction across the galaxy. Chaos can twist the mind, flesh and metal, but so can our free-blade artist, \u003ca href=\"https:\/\/cults3d.com\/en\/users\/KarnageKing\/creations\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eKarnageKing\u003c\/a\u003e how brought this model to life. The torsos is one piece, with 2 pin to attach each arm at the shoulder. Additional arms and weapons options are sold separately.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":39333500878950,"sku":"20000115-4MR3","price":25.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-SonicOblitHulk_1Hedon.png?v=1737136879"},{"product_id":"children-of-torment-sonic-obliteration-hulk-1","title":"Children of Torment : Sonic Obliteration Hulk","description":"\u003cp\u003eThe dark powers of excess have brought forth this Hulk of Obliteration to blast sonic destruction across the galaxy. Chaos can twist the mind, flesh and metal, but so can our free-blade artist, \u003ca href=\"https:\/\/cults3d.com\/en\/users\/KarnageKing\/creations\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eKarnageKing\u003c\/a\u003e how brought this model to life. The torsos is one piece, with 2 pin to attach each arm at the shoulder. Additional arms and weapons options are sold separately.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":39333502451814,"sku":"20000114-4MR3","price":25.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-SonicOblitHulk_1Torment.png?v=1737136273"},{"product_id":"full-kit-arch-battle-knight-antonis","title":"Arch Battleknight: Paladin","description":"\u003cp\u003e\u003cstrong\u003eThis FULL MODEL KIT does NOT need any other model to construct.\u003c\/strong\u003e All the parts you need (and more) are in this set. It can be assembled in a wide range of poses and has many weapons and customization options.\u003c\/p\u003e\n\u003cp\u003eThis 73 piece model Kit comes with the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMultiple head, shoulder pad, chest and armor ornamentation options.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRanged Weapons: Hurricane Autocannon, Inferno Flamer and Psycho Cannon with wrist mounts for the left and right arms.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMelee Weapons: Deamon Slayer, Cleaver and Mauler.\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFully assembled this model stands roughly 11cm tall about 4\", which matches a Dreadknight or Telemon. It's a perfect as a centerpiece for your tabletop army, or as a cool display piece on your desk. Other parts, weapon options and a unique \u003cmeta charset=\"utf-8\"\u003e\u003cb\u003e120 x 92mm\u003c\/b\u003e\u003cspan\u003e Oval Base is sold separately. \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cem data-mce-fragment=\"1\"\u003eNOTE:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/em\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis kit is Licensed, for a limited time, to Pop Goes the Monkey from the digital artist, \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAntonis Bouras\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e. If you would like to purchase this .stl file or see what he's working on next \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/linktr.ee\/antonisbouras\" target=\"_blank\"\u003e[click here].\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring that all components remain secure during transportation and minimizing the need for extra labor costs for removal. Most parts can be easily removed by hand; however, some may require snippers or a hobby knife for a cleaner detachment. Please be sure to use sharp tools carefully to avoid injury. All products are pre-cleaned and ready for primer and paint once removed. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":39416527585382,"sku":"20000026-4MR3","price":65.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-ABK-Paladin-MR3-OLD.png?v=1737407810"},{"product_id":"brusquig-robo-squib-32mm","title":"Brusquig : Robo-Squib (32mm)","description":"\u003cp\u003e\u003cstrong\u003e“Nev'a go Thursty when Ur'onna Waagh again”\u003c\/strong\u003e —Swill Agims \u003cbr\u003e\u003cbr\u003eThis full model is designed to be added to your orc mob to fill in your ranks with some unique figures or can be used for a one-of-a-kind bomb runner. This little guys will fit on a 32mm base and are roughly 32mm wide, 25mm deep \u0026amp; 27mm tall. Round bases are not included.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50283003216192,"sku":"20000187-4MR3","price":16.0,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395088785728,"sku":"M12068632-4CRYSTAL","price":24.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395088818496,"sku":"M12068632-4ARMOR","price":27.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_35859850_18794706_1686938572_1_0_3d04f1a4-2251-4d00-828a-2cc09aaa8e54.jpg?v=1693442677"},{"product_id":"orc-deff-rolla-krugitz-2021","title":"Orc Deff-Rolla: Krugitz 21","description":"\u003cp\u003e\u003cstrong\u003eThe Orc Deff-Rollas \u003c\/strong\u003erip across the battlefield with the reckless abandon of the crazed green-skined pilots. \u003cmeta charset=\"utf-8\"\u003eOur customers find it to be a great stand-in for a Nob Biker, \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eDeffkoptas, Goblin tank, or \u003c\/span\u003eKilla Kan.*\u003c\/p\u003e\n\u003cp\u003eThis is\u003cstrong\u003e \u003c\/strong\u003efull model kit that is roughly 68 mm long, 75 mm wide and 55 mm tall and comes with 3 weapons: Rocket Launcher (R) and two Heavy Machine Guns (L\u0026amp;R). \u003cspan\u003eThe kit is made up of 6 pieces: Left side, Treads, Right side, Jaw Bumper, your two weapon choices. Use super glue to adhere parts. Base is not Included.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":39443582255206,"sku":"20000118-4MR3","price":35.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Screenshot2024-08-01at5.10.26PM.png?v=1737140715"},{"product_id":"stinkeye-plague-demon-lord","title":"Stinkeye : Demon Plague Lord","description":"\u003cp\u003e\u003cem\u003e\"I spy something sick, I spy something in despair, I spy something that is only 7 steps away from DEATH. That's right, it's YOU\"\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e- Stinkeye the Lord of Flies. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit includes 6 pieces that make a Full Demon Prince-scaled model. The kit includes a full torso, a turbo-prop jetpack and 4 weapon options. These options include a set of demon power claws, a large blight knife, and warp-powered bolt gun. \u003cmeta charset=\"utf-8\"\u003eAll you will need is a large Demon-Prince base like our \u003ca title=\"60mm Round Bases\" href=\"https:\/\/popgoesthemonkey.com\/collections\/scenery\/diameter_-60mm\"\u003eBlank : 60mm Round Bases.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit was designed and sculpted by the free-blade artist,\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cults3d.com\/en\/users\/KarnageKing\/creations\" title=\"Karnage King's store\" target=\"_blank\"\u003eKarnageKing.\u003c\/a\u003e \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eNOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":39542578446438,"sku":"20000089-4MR3","price":40.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-Stinkeye-MR3.png?v=1736286297"},{"product_id":"loaded-eternus-assault-armor-kit","title":"Standard : Eternus Assault Armor kit","description":"\u003cp\u003e\u003cstrong\u003eThe Eternus Assault Armor\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a Multipart, Magnet-Ready kit designed for flex-ability and customization. Fully assembled it stands 7cm tall (about 3-1\/2\") and is a comparable size to a Contemptor Dreadnought*. It can be assembled in a wide range of poses with many customization including 4 head options. Its arms and weapons come pre-drilled for magnets to make them interchangeable for future-proofing your miniature.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eThis kit comes with multiple options for the head and armor details, Right \u0026amp; Left underslung weapon hands, missile launcher and… \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eLeft-hand Power Claw and Fist with wrist weapons\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1 Beam Cannon\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1 Plasma Cannon\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1 Laser Cannon\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e1 Stud Cannon\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e1 Heat Ray Cannon\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e1 Thermal Cannon\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e1 Repeating Cannon\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e1 Gatling Cannon\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis kit is Licensed, for a limited time, to Pop Goes the Monkey from the digital artist, \u003c\/span\u003e\u003cstrong\u003eAntonis Bouras\u003cspan\u003e. \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003eIf you would like to purchase this .stl file or see what he's working on next \u003c\/span\u003e\u003ca href=\"https:\/\/linktr.ee\/antonisbouras\" target=\"_blank\"\u003e[click here].\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/popgoesthemonkey.com\/pages\/eternus-assault-armor-assembly-instructions\" title=\"ETERNUS ASSAULT ARMOR: ASSEMBLY INSTRUCTIONS\"\u003eAssembly Instructions can be found at this link.\u003c\/a\u003e \u003c\/strong\u003eTo assemble the Eternus Assault Armor with magnets for switching weapons you will need the following sizes (all measurements are diameter x depth):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eElbow Joints: top arm 1\/4\" x 1\/16\", bottom arm 1\/4 x 1\/32\" per arm\u003c\/li\u003e\n\u003cli\u003eWrist Joints require two 1\/4\" x 1\/32\" per arm\u003c\/li\u003e\n\u003cli\u003eTop Missile Launcher requires two 1\/8\" x 1\/16\" magnets\u003c\/li\u003e\n\u003cli\u003eEach Weapon will require a 1\/4\" x 1\/16\" and a 1\/4\" x 1\/32\" magnet along with two smaller 1\/8\" x 1\/16\" and 1\/8\" x 1\/32\" magnets to prevent torquing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe kit also comes with two plugs to use for elbow joints if you decide to assemble your Eternus without any magnets as well. A base is not included, but we recommend our \u003c\/span\u003e\u003ca href=\"https:\/\/popgoesthemonkey.com\/search?q=60mm+Round+base\" title=\"Our 60mm round base options\"\u003e60mm Round base\u003c\/a\u003e\u003cspan\u003e options.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin","offer_id":39585000620134,"sku":"20000025-4MR3","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG_EAA_FullKit-Base.png?v=1752183606"},{"product_id":"5x-saturnus-terminator-mk-2-crusader-squad","title":"5x Saturnus Terminator Mk:2 Crusader Squad","description":"\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eMk2 Saturnus-Pattern Terminator Armor\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewas designed to harken back to the Darker Age of the Galactic Empire. Don't be fooled, t\u003cspan\u003ehey might look vintage, but these models will look a Primaris marine right in the eye. \u003cmeta charset=\"utf-8\"\u003eThe torsos are one piece, with 2 pin holes under each massive shoulder pads. These are used to attach and position the weapon arms. Bases are not included.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA Crusader Squad\u003c\/strong\u003e is lead by a Sergeant armed with an Energy Sword or Fist and a Blitz-bolter, Plasma Blaster or Volkcharger. The rest of the Squad is armed with Energy Fists and Blitz-bolters, along with an optional Roto-Fist, Flame Thrower and Gatling cannon.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e You can select to swap the Flame Thrower and Gatling cannon for a Missile Launcher load-out under the special weapons options.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eSculpted by \u003c\/span\u003e\u003cspan\u003eour Sanctioned Artist: \u003c\/span\u003e\u003ca title=\"Karnage King creations on Cults3d\" href=\"https:\/\/cults3d.com\/en\/users\/KarnageKing\/creations\" target=\"_blank\"\u003eKarnageKing.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin \/ Flame Thrower\/Gat.Cannon","offer_id":39621104828518,"sku":"20000106-4MR3","price":45.5,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin \/ Missle Launcher","offer_id":39621104861286,"sku":"20000107-4MR3","price":40.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-Saturnus-Mk2_Crusader-1a.png?v=1736972602"},{"product_id":"5x-saturnus-terminator-mk-1-crusader-squad","title":"5x Saturnus Terminator Mk:1 Crusader Squad","description":"\u003cp\u003eThe \u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eMk1 Saturnus-Pattern Terminator Armor\u003c\/strong\u003e was designed to harken back to the Darker Age of the Galactic Empire. Don't be fooled, t\u003cspan\u003ehey might look vintage, but these models will look a Primaris marine right in the eye. \u003cmeta charset=\"utf-8\"\u003eThe torsos are one piece, with 2 pin holes under each massive shoulder pads. These are used to attach and position the weapon arms. Bases are not included.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e\u003cstrong\u003eA Crusader Squad\u003c\/strong\u003e is lead by a Sergeant armed with \u003cmeta charset=\"utf-8\"\u003ean Energy Sword or Fist and a \u003cmeta charset=\"utf-8\"\u003eBlitz-bolter, Plasma Blaster or Volkcharger. The rest of the Squad is armed with Energy Fists and Blitz-bolters, along with an optional Roto-Fist, \u003c\/span\u003eFlame Thrower and Gatling cannon.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e You can select to swap the \u003cmeta charset=\"utf-8\"\u003eFlame Thrower and Gatling cannon for a Missile Launcher load-out under the special weapons options.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eSculpted by \u003c\/span\u003e\u003cspan\u003eour Sanctioned Artist: \u003c\/span\u003e\u003ca title=\"Karnage King creations on Cults3d\" href=\"https:\/\/cults3d.com\/en\/users\/KarnageKing\/creations\" target=\"_blank\"\u003eKarnageKing.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3 \/ Flame Thrower\/Gat.Cannon","offer_id":39621147361382,"sku":"20000101-4MR3","price":45.5,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3 \/ Missile Launcher","offer_id":39621147426918,"sku":"20000102-4MR3","price":40.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-Mk1Saturn-Crus-MR3.png?v=1736636807"},{"product_id":"5x-saturnus-terminator-mk-1-invader-squad","title":"5x Saturnus Terminator Mk:1 Invader Squad","description":"\u003cp\u003e\u003cstrong\u003eThe Mk1 Saturnus-Pattern Terminator Armor\u003c\/strong\u003e was designed to harken back to the Darker Age of the Galactic Empire. Don't be fooled, they might look vintage, but these models will look a Primaris marine right in the eye. The torsos are one piece, with 2 pin holes under each massive shoulder pads. These are used to attach and position the weapon arms. Bases are not included.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe Invader Squad include 5 Saturnus Terminator models armed with a pair of Power Claws.\u003c\/strong\u003e Additional arms and weapons options are sold separately.\u003cbr\u003e\u003cbr\u003eSculpted by our Sanctioned Artist: \u003ca href=\"https:\/\/cults3d.com\/en\/users\/KarnageKing\/creations\" title=\"Karnage King creations on Cults3d\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eKarnageKing.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.ion.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":39621952962662,"sku":"20000103-4MR3","price":35.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-Saturnus-Mk1_Invader-02.png?v=1736894002"},{"product_id":"5x-saturnus-terminator-mk-2-invader-squad","title":"5x Saturnus Terminator Mk:2 Invader Squad","description":"\u003cp\u003e\u003cstrong\u003eThe Mk1 Saturnus-Pattern Terminator Armor\u003c\/strong\u003e was designed to harken back to the Darker Age of the Galactic Empire. Don't be fooled, they might look vintage, but these models will look a Primaris marine right in the eye. The torsos are one piece, with 2 pin holes under each massive shoulder pads. These are used to attach and position the weapon arms. Bases are not included.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe Invader Squad include 5 Saturnus Terminator models armed with a pair of Power Claws.\u003c\/strong\u003e Additional arms and weapons options are sold separately.\u003cbr\u003e\u003cbr\u003eSculpted by our Sanctioned Artist: \u003ca href=\"https:\/\/cults3d.com\/en\/users\/KarnageKing\/creations\" title=\"Karnage King creations on Cults3d\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eKarnageKing.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMonkey Resin\u003c\/strong\u003e is a high-quality UV cured resin that will come attached to a support structure from the production process. The parts are however, pre-cleaned and ready for primer once removed. Use only super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003eTo remove the bits from their supports:\u003c\/span\u003e \u003c\/em\u003esubmerge the whole assembly in water that is hot to the touch for 5 minutes. Use your fingernail to punch away several supports to create a starting point, and carefully peel your parts off of the remaining supports all together.\u003cbr\u003e\u003cbr\u003eYou can use a very fine-grit sandpaper if needed to smooth any surface or feature further. Always be sure to wear a mask when working around resin dust.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.ion.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":39621961187430,"sku":"20000108-4MR3","price":35.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-Saturnus-Mk2_Invader-1.png?v=1736976759"},{"product_id":"blood-butcher-terminators-squad-pack","title":"5x Blood Butcher Terminators Squad","description":"\u003cp\u003eThe Blood Butcher Terminators are veterans of a millennium of war. Their ancient, blood soaked, Saturnus-Pattern Armor has been gifted by the warp by the lord of skulls. They were designed and sculpted by the free-blade artist,\u003cstrong\u003e KarnageKing.\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis Squad pack include:\u003c\/strong\u003e \u003cspan style=\"color: #d62705;\"\u003e\u003cstrong\u003e5 Berserk Terminator models\u003c\/strong\u003e\u003c\/span\u003e armed with Accused Roto-Axes and Blitz-bolters. To modify the squad, this set also comes with 6 Power Claws, a Heavy Roto-Claw, a Demon Sword and 2 Plasfire Guns (L\u0026amp;R). Additional arms and weapons options are sold separately. (Mk-1 and Mk-2 options will fit)\u003cbr\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e(Painted model photo courteous of Andrew Greystone.)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":39639169400934,"sku":"20000098-4MR3","price":48.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-BloodButchers_Sq1-MR3_ea982ea0-27d9-4368-9520-b498a17141fb.png?v=1736633454"},{"product_id":"werewolf-cavalry-3-pack","title":"3x Werewolf Cavalry -  First Hunt","description":"\u003cp\u003eWhether it's the corruption of the warp or a mutated gene-seed that has gone awry, these once proud legionaries are now towering monster that fight for the Allfather.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThese are full model kits that give you a near demon prince-sized warrior that works great as counts-as Thunder Wolf Cavalry model. \u003c\/strong\u003eEach werewolf can be equipped with a set of bare-handed Claws or a shield and melee weapon. Bases are not included, but we do suggest our blank 60mm round bases.\u003c\/p\u003e\n\u003cp\u003eThis model was sculpted by Freelance Artist: \u003ca href=\"https:\/\/www.artstation.com\/grandroyalminiatures\" title=\"Link to artist site\" rel=\"noopener\" target=\"_blank\"\u003eGrand Royal \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":39782683574374,"sku":"20000075-4MR3","price":49.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-Werewolf-Cav2-Set1.png?v=1736454730"},{"product_id":"leboom-bomb-squib","title":"LeBoom : Bomb Squib","description":"\u003cp\u003eThis mean little mouth of teeth and explosives will make a big impact on your enemies. A unique option for a Orc Commandos Kill Team, Orc army or for your next painting project. Note: Base is not included\u003cbr\u003e\u003cbr\u003eSculpted by Freelance Artist: \u003ca href=\"https:\/\/www.cgtrader.com\/froglin-miniatures\" rel=\"nofollow\"\u003eFroglin Minis \u003c\/a\u003e - (STLs for these bits may be available at on the artist's linked page)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50392538349888,"sku":"20000570-4MR3","price":16.0,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49394938315072,"sku":"12965731-4CRYSTAL","price":21.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394938347840,"sku":"12965731-4ARMOR","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_37845132_20068025_1686938649_1_0_44c34d67-e6f7-4599-84d9-fc625ebd2979.jpg?v=1735425860"},{"product_id":"horcanz-hero-goblin-jojo-grapple","title":"Horcanz Hero Goblin : Jojo Grapple","description":"\u003cp\u003eAs a part of Horcanz Heroes, Jojo was designed as Commando Goblin for a Orc Kill Team, but you could use him  in you orc army, scenery or your next painting project. Note: Base for the modle is not included.\u003cbr\u003e\u003cbr\u003eSculpted by Freelance Artist: \u003ca href=\"https:\/\/www.cgtrader.com\/froglin-miniatures\" rel=\"nofollow\"\u003eFroglin Minis​\u003c\/a\u003e- (STLs for these bits may be available at on the artist's linked page) \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50392547295552,"sku":"20000571-4MR3","price":13.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49394938249536,"sku":"12965732-4CRYSTAL","price":16.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394938282304,"sku":"12965732-4ARMOR","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_37845174_20068051_1686938649_1_0_0a13cb6f-777d-4f45-9ffe-bdde8c207bcb.jpg?v=1735425858"},{"product_id":"orc-buccaneer-cabin-boy-urzog","title":"Orc Buccaneer Cabin Boy : Urzog","description":"\u003cp\u003eAs a part of Kaptin Gorgrok Brewguzzla freebooter crew, Urzog was designed as Commando Goblin for a Orc Kill Team, but you could use him for just the right salty feel. \u003cbr\u003e\u003cbr\u003eSculpted by Freelance Artist: \u003ca href=\"https:\/\/cults3d.com\/en\/users\/JoshButIn3D\/creations\" rel=\"nofollow\"\u003eJoshButin3D\u003c\/a\u003e- (STLs for these bits may be available at on the artist's linked page) \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50392562827584,"sku":"20000572-4MR3","price":14.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49394937954624,"sku":"12965724-4CRYSTAL","price":17.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394937987392,"sku":"12965724-4ARMOR","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_37844699_20067663_1686938648_1_0_36b1546b-82ed-4f84-83b2-8bd995cb7e1b.jpg?v=1735425851"},{"product_id":"puffer-robo-squid-32mm","title":"Puffer : Robo-Squib (32mm)","description":"\u003cp\u003e\"Dis lil' squid gotta real short fuse. Best point him at da enemy and watch the sparks fly.\"\u003cem\u003e \u003c\/em\u003e\u003cstrong\u003e- Kaptin Gorgrok Brewguzzla\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis full model is designed to be added to your orc kill team or mob to fill in your ranks with some unique figures or can be used for a one-of-a-kind bomb runner. This little guys will fit on a 32mm base and are roughly 30mm wide, 30mm deep \u0026amp; 33mm tall. Round bases are not included.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50282992238912,"sku":"20000186-4MR3","price":16.0,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49394937856320,"sku":"12965726-4CRYSTAL","price":25.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394937889088,"sku":"12965726-4ARMOR","price":28.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_37844994_20067915_1686938648_1_0_32734424-d4fb-4a74-a30b-f4164a0e6c0f.jpg?v=1735425849"},{"product_id":"cult-ottomari-cohort-magos","title":"Cult Ottomari : Cohort Magos","description":"\u003cstrong\u003eThe Ottomari Cohort Arcana\u003c\/strong\u003e\u003cspan style=\"font-size:14px\"\u003e commune with the dark gods and, though their gifts, spread the word of chaos. The unsanctioned psykic power of this dark Magos reap a terrible price on both the ranks of its enem\u003c\/span\u003e\u003cspan style=\"font-size:14px\"\u003eie\u003c\/span\u003e\u003cspan style=\"font-size:14px\"\u003es \u003c\/span\u003e\u003cspan style=\"font-size:14px\"\u003eand the soul of the wielder.\u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\nOur customer found this can be a great alternative for a Mindwitch in their Dark Commune, Unsactioned psyker, or even a Magic user in your D\u0026amp;D adventure. This kit includes 1 full model without a base.\u003cbr\u003e\n\u003cbr\u003e\nSculpted by our Sanctioned Artist: \u003ca href=\"https:\/\/cults3d.com\/en\/users\/KarnageKing\/creations\" rel=\"nofollow\"\u003eKarnageKing.\u003c\/a\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.ion.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49394534875456,"sku":"M12987717-4CRYSTAL","price":26.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394534908224,"sku":"M12987717-4ARMOR","price":33.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_37915502_20115880_1686938652_1_0_419617b2-97e2-4810-9ba9-e9c5fbc9d471.jpg?v=1735425673"},{"product_id":"3x-werewolf-cavalry-third-pack","title":"3x Werewolf Cavalry -  Third Hunt","description":"\u003cp\u003eWhether it's the corruption of the warp or a mutated gene-seed that has gone awry, these once proud legionaries are now towering monster that fight for the Allfather.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThese are full model kits that give you a near demon prince-sized warrior that works great as counts-as Thunder Wolf Cavalry model.\u003c\/strong\u003e Each werewolf can be equipped with a set of bare-handed Claws or a shield and melee weapon. Bases are not included, but we do suggest our blank 60mm round bases.\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis model was sculpted by Freelance Artist: \u003ca href=\"https:\/\/www.artstation.com\/grandroyalminiatures\" title=\"Link to artist site\" rel=\"noopener\" target=\"_blank\"\u003eGrand Royal \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eNOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin3","offer_id":45203216761152,"sku":"20000077-4MR3","price":49.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-Werewolf-Cav2-Set3.png?v=1736458470"},{"product_id":"3x-werewolf-cavalry-second-pack","title":"3x Werewolf Cavalry -  Second Hunt","description":"\u003cp\u003eWhether it's the corruption of the warp or a mutated gene-seed that has gone awry, these once proud legionaries are now towering monster that fight for the Allfather.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThese are full model kits that give you a near demon prince-sized warrior that works great as counts-as Thunder Wolf Cavalry model.\u003c\/strong\u003e Each werewolf can be equipped with a set of bare-handed Claws or a shield and melee weapon. Bases are not included, but we do suggest our blank 60mm round bases.\u003c\/p\u003e\n\u003cp\u003eThis model was sculpted by Freelance Artist: \u003ca href=\"https:\/\/www.artstation.com\/grandroyalminiatures\" title=\"Link to artist site\" rel=\"noopener\" target=\"_blank\"\u003eGrand Royal \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eNOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":45203246285120,"sku":"20000076-4MR3","price":49.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-Werewolf-Cav2-Set2.png?v=1736458342"},{"product_id":"naked-loaded-eternus-assault-armor-kit","title":"Naked : Eternus Armor-Ready kit","description":"\u003cp\u003e\u003cstrong\u003eThis NAKED: Eternus Armor-Ready Kit\u003c\/strong\u003e does \u003cspan style=\"text-decoration: underline;\"\u003eNOT \u003c\/span\u003emake a complete Eternus Assault Armor model, but it does have all the core parts needed, besides the armor pieces, which makes it a perfect combination with our \u003ca rel=\"noopener\" title=\"Check out our Eternus Armor Conversation Kit options\" href=\"https:\/\/popgoesthemonkey.com\/collections\/eternus-armor-conversation-kits\" target=\"_blank\"\u003eEternus Armor Conversation Kits*.\u003c\/a\u003e With that said…\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eGET 10% OFF\u003c\/span\u003e this kit when purchased with one of your favorite \u003ca href=\"https:\/\/popgoesthemonkey.com\/collections\/eternus-armor-conversation-kits\" title=\"Link to Eternus Armor Conversation Kits\"\u003eEternus Armor Conversation Kits.\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis magnet-ready model is built for flexibility and customization. When fully assembled, it measures 7cm tall (about 3-1\/2\") and is similar in size to a Contemptor Dreadnought**. It can be posed in many different ways. Its arms and weapons arrive pre-drilled for magnets, making them easy to swap out and future-proof your miniature.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis kit includes\u003c\/strong\u003e a left-handed power fist and claw, a left and right weapon-ready arm for ranged weapons, a magnet-ready, top-mounted missile launcher, and each of the following ranged weapons: \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBeam Cannon\u003c\/li\u003e\n\u003cli\u003ePlasma Cannon\u003c\/li\u003e\n\u003cli\u003eLaser Cannon\u003c\/li\u003e\n\u003cli\u003eStud Cannon\u003c\/li\u003e\n\u003cli\u003eHeat Ray Cannon\u003c\/li\u003e\n\u003cli\u003eThermal Cannon\u003c\/li\u003e\n\u003cli\u003eRepeating Cannon\u003c\/li\u003e\n\u003cli\u003eGatling Cannon\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e*The Eternus head, shoulder pads, chest plate, shin pads \u003c\/strong\u003e(aka Eternus Armor Conversation Kit)\u003cstrong\u003e are sold separately.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Instructions for assembly\" href=\"https:\/\/popgoesthemonkey.com\/pages\/eternus-assault-armor-assembly-instructions\" target=\"_blank\"\u003eAssembly Instructions can be found at this link\u003c\/a\u003e To assemble the Eternus Assault Armor with magnets for switching weapons you will need the following sizes (all measurements are diameter x depth):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eElbow Joints: top arm 1\/4\" x 1\/16\", bottom arm 1\/4 x 1\/32\" per arm\u003c\/li\u003e\n\u003cli\u003eWrist Joints require two 1\/4\" x 1\/32\" per arm\u003c\/li\u003e\n\u003cli\u003eTop Missile Launcher requires two 1\/8\" x 1\/16\" magnets\u003c\/li\u003e\n\u003cli\u003eEach Weapon will require a 1\/4\" x 1\/16\" and a 1\/4\" x 1\/32\" magnet along with two smaller 1\/8\" x 1\/16\" and 1\/8\" x 1\/32\" magnets to prevent torquing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe kit also comes with two plugs to use for elbow joints if you decide to assemble your Eternus without any magnets as well. A base is not included, but we recommend our; 60mm Round base options.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThis kit is Licensed, for a limited time, to Pop Goes the Monkey from the digital artist, Antonis Bouras; If you would like to purchase this .stl file or see what he's working on \u003ca href=\"https:\/\/linktr.ee\/antonisbouras\" title=\"Link to Artist site\" target=\"_blank\"\u003e[click here]\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e**NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. \u0026amp;nbsp;This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. \u0026amp;nbsp;Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin","offer_id":45243743863104,"sku":"20000024-4MR3","price":45.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-NakedEternus1-MR3.png?v=1735425300"},{"product_id":"5x-hell-raiser-terminators-squad-pack","title":"5x Hell Raiser Terminators: Flensing Squad","description":"\u003cp\u003e\u003cstrong\u003eThe Hell Raiser Terminators\u003c\/strong\u003e scream their war cries across the battlefield as their enormous Flensing Spears and shoulder-mounted combolters rip their challengers apart at range. Clad in ancient Mk3 Saturnus-Pattern Armor that has been warped by the whims of the Dark Prince of Excess. They were designed and sculpted by the free-blade artist, \u003ca rel=\"noopener noreferrer\" title=\"Link to Karnage King's website\" href=\"https:\/\/cults3d.com\/en\/users\/KarnageKing\/creations\" target=\"_blank\"\u003eKarnageKing\u003c\/a\u003e. \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003eThis Squad pack includes:\u003c\/span\u003e 5 Hell Raiser Terminator models armed with long two-handed Flensing Spears and a choice of various Combi-weapons. You can also choose to forgo the Combi-weapon and instead give your terminator a brash mohawk. Additional Mk3 weapon arms and weapons options are sold separately.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003epop\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":45436244590912,"sku":"20000095-4MR3","price":49.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-HellRaisers__MR3b_53e3d2d0-5424-460b-8306-d5df95923f0b.png?v=1736633911"},{"product_id":"5x-saturnus-terminator-mk-3-sentinel-squad","title":"5x Saturnus Terminator Mk:3 Sentinel Squad","description":"\u003cp\u003eThe \u003cstrong\u003eMk3 Saturnus-Pattern Terminator Armor\u003c\/strong\u003e was designed to harken back to the Darker Age of the Galactic Empire. Don't be fooled, they might look vintage, but these models will look a Primaris marine right in the eye. The torsos are one piece, with 2 pin holes under each massive shoulder pads. These are used to attach and position the weapon arms. The Mk3 also features a carapace mount for various ranged weapon options to allow these melee specialist to wield  massive 2-handed power spears or halberds. Bases are not included.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe Sentinel Squad include\u003c\/strong\u003e: 5 Saturnus Terminator models armed with either a powered Sentinel Spear or Halberd. Your sergeant can also choose to wield a Great Hammer.  Each terminator gets a\u003cspan\u003e \u003c\/span\u003ecarapace-mounted\u003cspan\u003e Blitzbolter or your choice of six Combi-weapon (Flame, Thermal or Plasma)\u003c\/span\u003e. Additional Mk3 arms and weapons options are sold separately.\u003cbr\u003e\u003cbr\u003eSculpted by our Sanctioned Artist: \u003ca rel=\"noopener noreferrer\" title=\"Link to Karnage King's website\" href=\"https:\/\/cults3d.com\/en\/users\/KarnageKing\/creations\" target=\"_blank\"\u003eKarnageKing\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.ion.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":46063464743232,"sku":"20000110-4MR3","price":50.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-Mk3-Sentinels-01-MR3.png?v=1737057839"},{"product_id":"5x-saturnus-terminator-mk-3-invader-squad","title":"5x Saturnus Terminator Mk:3 Invader Squad","description":"\u003cp\u003e\u003cstrong\u003eThe Mk3 Saturnus-Pattern Terminator Armor\u003c\/strong\u003e was designed to harken back to the Darker Age of the Galactic Empire. Don't be fooled, they might look vintage, but these models will look a Primaris marine right in the eye. The torsos are one piece, with 2 pin holes under each massive shoulder pads. These are used to attach and position the weapon arms. Bases are not included.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe Invader Squad include 5 Saturnus Terminator models armed with a deadly pair of Power Claws.\u003c\/strong\u003e There are multiple options for the upper weapon mount which includes a Squad Banner, Top-knots or Haloed Skulls. Additional arms and weapons options are sold separately.\u003cbr\u003e\u003cbr\u003eSculpted by our Sanctioned Artist: \u003ca rel=\"noopener noreferrer\" title=\"Link to Karnage King's website\" href=\"https:\/\/cults3d.com\/en\/users\/KarnageKing\/creations\" target=\"_blank\"\u003eKarnageKing.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3 \u003c\/strong\u003eis a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.ion.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":46064218046784,"sku":"20000111-4MR3","price":39.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-Mk3-Invaders-01-MR3.png?v=1737066105"},{"product_id":"cult-ottomari-fiendish-herald","title":"Cult Ottomari : Fiendish Herald","description":"\u003cstrong\u003eThe Ottomari Cohort Arcana\u003c\/strong\u003e commune with the dark gods and, though their gifts, spread the word of chaos. The warp-fueled sigils carried by this Fiendish Herald  fills the hearts of their enemies with dread and whispers promises of bliss to their allies. \u003cbr\u003e\n\u003cbr\u003e\nOur customer found this can be a great alternative for a \u003cspan style=\"font-size:14px\"\u003eIconarch\u003c\/span\u003e in their Dark Commune, or standard bearer for their cultist mob. This kit includes 1 full model \u003cstrong\u003ewithout\u003c\/strong\u003e a base.\u003cbr\u003e\n\u003cbr\u003e\nSculpted by our Sanctioned Artist: \u003ca href=\"https:\/\/cults3d.com\/en\/users\/KarnageKing\/creations\" rel=\"nofollow\"\u003eKarnageKing.\u003c\/a\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.ion.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49394472091968,"sku":"M12987705-4CRYSTAL","price":26.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394472124736,"sku":"M12987705-4ARMOR","price":29.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_37915357_20115537_1691869265_1_0.jpg?v=1735425114"},{"product_id":"cult-ottomari-janissary-sabers","title":"Cult Ottomari : Janissary Sabers","description":"The Ottomari Cohort Arcana commune with the dark gods and, though their gifts, spread the word of chaos. The marshal prowess of the Janissary Sabers ensure the protection of the Cohort while also sating the blood lust of the dark gods.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eNOTE:\u003c\/strong\u003e The \u003cstrong\u003eSIZE\u003c\/strong\u003e Selection Equates to Quantity per Sprue, \u003cstrong\u003eNOT\u003c\/strong\u003e the Products’ Scale.\u003cbr\u003e Small sprue = \u003cstrong\u003e1 Warrior\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eMedium\u003c\/strong\u003e sprue = \u003cstrong\u003e2 Warriors\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e Our customer found this can be a great alternative for \u003cspan style=\"font-size: 14px;\"\u003eBlessed Blades\u003c\/span\u003e in their Dark Commune, or even a One-of-a-kind Warrior for your next D\u0026amp;D adventure. This kit includes 1 or 2 full model without a base.\u003cbr\u003e \u003cbr\u003e Sculpted by our Sanctioned Artist: \u003ca href=\"https:\/\/cults3d.com\/en\/users\/KarnageKing\/creations\" rel=\"nofollow\"\u003eKarnageKing.\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e  \u003cbr\u003e \u003cbr\u003e *NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.ion.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP \/ Medium","offer_id":49394471829824,"sku":"M13011193-4CRYSTAL","price":29.25,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ Small","offer_id":49394471862592,"sku":"M12987712-4CRYSTAL","price":19.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Small","offer_id":49394471895360,"sku":"M12987712-4ARMOR","price":21.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Medium","offer_id":49394471928128,"sku":"M13011193-4ARMOR","price":34.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_37915568_20115941_1686938652_1_0.jpg?v=1735425111"},{"product_id":"obliteration-hulk-4-pack","title":"4x Obliteration Hulks","description":"\u003cp\u003e\u003cstrong\u003eKit Includes 4 Full Obliteration Hulk Models.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe dark powers of the warp have brought forth this \u003c\/span\u003e\u003cstrong\u003eHulk of Obliteration\u003c\/strong\u003e\u003cspan\u003e to rake destruction across the galaxy. Chaos can twist the mind, flesh and metal, but so can our free-blade artist, \u003c\/span\u003e\u003ca href=\"https:\/\/cults3d.com\/en\/users\/KarnageKing\/creations\" target=\"_blank\"\u003eKarnageKing\u003c\/a\u003e\u003cspan\u003e how brought this model to life. The torsos is one piece, with 2 pin to attach each arm at the shoulder. Additional arms and weapons options are sold separately.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":47501603438912,"sku":"20000094-4MR3","price":65.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-OblitHulk-4pack-MR3.png?v=1736539259"},{"product_id":"obliteration-hulk-2-pack-alpha","title":"2x Obliteration Hulks : Alpha Pack","description":"\u003cp\u003e\u003cstrong\u003eKit Includes 2 Full Obliteration Hulk Models.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe dark powers of the warp have brought forth this \u003c\/span\u003e\u003cstrong\u003eHulk of Obliteration\u003c\/strong\u003e\u003cspan\u003e to rake destruction across the galaxy. Chaos can twist the mind, flesh and metal, but so can our free-blade artist, \u003c\/span\u003e\u003ca href=\"https:\/\/cults3d.com\/en\/users\/KarnageKing\/creations\" target=\"_blank\"\u003eKarnageKing\u003c\/a\u003e\u003cspan\u003e how brought this model to life. The torsos is one piece, with 2 pin to attach each arm at the shoulder. Additional arms and weapons options are sold separately.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.\u003c\/span\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":47501619396928,"sku":"20000099-4MR3","price":38.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-OblidHulk-TwinPack-MR3.png?v=1736797085"},{"product_id":"obliteration-hulk-2-pack-beta","title":"2x Obliteration Hulks : Beta Pack","description":"\u003cp\u003e\u003cstrong\u003eKit Includes 2 Full Obliteration Hulk Models.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe dark powers of the warp have brought forth this \u003c\/span\u003e\u003cstrong\u003eHulk of Obliteration\u003c\/strong\u003e\u003cspan\u003e to rake destruction across the galaxy. Chaos can twist the mind, flesh and metal, but so can our free-blade artist, \u003c\/span\u003e\u003ca href=\"https:\/\/cults3d.com\/en\/users\/KarnageKing\/creations\" target=\"_blank\"\u003eKarnageKing\u003c\/a\u003e\u003cspan\u003e how brought this model to life. The torsos is one piece, with 2 pin to attach each arm at the shoulder. Additional arms and weapons options are sold separately.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.\u003c\/span\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":47501627130176,"sku":"20000100-4MR3","price":38.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-OblidHulk-TwinPack2-MR3.png?v=1736805262"},{"product_id":"epic-scale-stronghold-1-0-stl","title":"Epic-Scale : Stronghold 1.0 (STL)","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e\u003cstrong\u003eThis epic Stronghold\u003c\/strong\u003e is \u003cmeta charset=\"utf-8\"\u003ecompatible with any 6mm Scale games such as Adeptus Titanicus, Legion Imperialis or Epic 40k. It contains 8 different magnet-ready pieces to allow you to quickly assemble a custom defensible fortification worthy of the emperors finest, then break it down and stow it away for easy storage.*\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe set includes:\u003cstrong\u003e a Gatehouse, a Long and Short Straight Wall section, a 90º Outer Corner Bulwark, a 45º Outer Corner, a 45º Inner Corner,\u003c\/strong\u003e and\u003cstrong\u003e two 90º Inner corners.\u003c\/strong\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis set is designed to use \u003ca href=\"https:\/\/themagnetbaron.com\/collections\/super-magnets\/products\/50pcs-1-4-x-1-32-rare-earth-disc-magnets\" title=\"Link to purchase magnets\"\u003e6mm Wide x 1mm Thick magnets\u003c\/a\u003e to hold it together while setting on the game table.. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff8000;\"\u003e\u003cstrong\u003ePLEASE NOTE:\u003c\/strong\u003e\u003c\/span\u003e this product is only a set of digital STL files for personal 3D printers, not a physical product. You will need your own equipment to produce these pieces for yourself \u003cspan data-mce-fragment=\"1\"\u003e(Restrictions Apply, See Below)\u003c\/span\u003e. I have set up the STL files  for either a Resin Printer (open interior) or a Filament Printer (solid pieces). Be sure to select your option from the \"Style\" Dropdown that will work with your equipment.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDownload STL File\u003c\/strong\u003e by selecting this choice under the Materials Options dropdown. If you have your own 3D printer and the tools needed to prepare and support them, this can be a great option. The STL file format is native to most any stereolithography\/CAD software. Purchased files are raw 3D graphics without supports so, they can be use without limitations by any specific equipment.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff8000;\" data-mce-style=\"color: #ff8000;\"\u003e*LEGAL DISCLAIMER for STL PURCHASE:\u003c\/span\u003e\u003c\/strong\u003e The rights granted to you through the purchase of our digital assets is for personal, non-commercial use only. Printed reproductions of these files are for your personal use only. You may not lawfully copy, trade and\/or resell these digital files or resell any printed reproductions to them in any way. The STL files may not be modified or altered to bypass these rights.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWe are not responsible for any misprints or issues that occur when printing these files or offer technical support to assist with your printer settings. If an issue occurs with the STL file itself, we will fix the file and an updated file will be sent to you automatically.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eBy purchasing these digital files, you are agreeing to all of the terms and conditions listed here.\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eNOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Download STL File \/ Both Formats","offer_id":47527691780416,"sku":"Stronghold-1.0_Both.zip","price":20.49,"currency_code":"USD","in_stock":true},{"title":"Download STL File \/ Resin Printer","offer_id":47527691714880,"sku":"Stronghold-1.0_Resin.zip","price":16.49,"currency_code":"USD","in_stock":true},{"title":"Download STL File \/ Filament Printer","offer_id":47527691747648,"sku":"Stronghold-1.0_Filament.zip","price":16.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-Stronghold_01-DD.png?v=1703227226"},{"product_id":"epic-scale-g3-core-marines-base","title":"Epic-Scale : G3 Core Marines (Base)","description":"\u003cp\u003eThese power-armored troops are armed with standard bolters. There is no squad leaders in this kit, just core troops. They are designed to be compatible with any 6mm Scale games such as Epic 40k or Legions Imperialis. Each model has its own tiny 6mm stand, which can be super glued onto your own base or can fit neatly onto our Epic Spacer Base.* \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP \/ 20 Troops","offer_id":49394435424576,"sku":"14328137-4CRYSTAL","price":19.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 20 Troops","offer_id":49394435457344,"sku":"14328137-4ARMOR","price":19.25,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 40 Troops","offer_id":49394435490112,"sku":"14328138-4CRYSTAL","price":27.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 40 Troops","offer_id":49394435522880,"sku":"14328138-4ARMOR","price":29.25,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 60 Troops","offer_id":49394435555648,"sku":"14328139-4CRYSTAL","price":35.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 60 Troops","offer_id":49394435588416,"sku":"14328139-4ARMOR","price":39.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 100 Troops","offer_id":49394435621184,"sku":"14328141-4CRYSTAL","price":53.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 100 Troops","offer_id":49394435653952,"sku":"14328141-4ARMOR","price":59.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-G3-Bolter-Core_1.png?v=1754520164"},{"product_id":"chaos-hoard-beastmen-axes-epic","title":"Chaos Hoard: Beastmen Axes (EPIC)","description":"NOTE: The \u003cstrong\u003eSIZE\u003c\/strong\u003e Selection Equates to \u003cstrong\u003eQuantity per Sprue\u003c\/strong\u003e, NOT the Products’ Scale.\u003cbr\u003e\r\n\u003cstrong\u003eSmall\u003c\/strong\u003e Sprue = \u003cstrong\u003e20 Troops\u003cbr\u003e\r\nMedium\u003c\/strong\u003e Sprue = \u003cstrong\u003e40 Troops\u003cbr\u003e\r\nLarge\u003c\/strong\u003e Sprue = \u003cstrong\u003e60 Troops\u003cbr\u003e\r\nXLarge\u003c\/strong\u003e Sprue = \u003cstrong\u003e100 Troops\u003c\/strong\u003e\u003cbr\u003e\r\n\u003cbr\u003e\r\nThese beastly troops is armed with large two-handed axes, which could be a great chaotic substitute for the Veletarii troops. They are designed to be compatible with any 6mm Scale games such as Epic 40k or Legions Imperialis. Each model has its own tiny 6mm stand, which can be super glued onto your own base or can fit neatly onto our Epic Spacer Base.\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cbr\u003e\r\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP \/ Small","offer_id":49394426085696,"sku":"14470327-4CRYSTAL","price":19.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Small","offer_id":49394426118464,"sku":"14470327-4ARMOR","price":19.25,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ Medium","offer_id":49394426151232,"sku":"14470329-4CRYSTAL","price":27.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Medium","offer_id":49394426184000,"sku":"14470329-4ARMOR","price":29.25,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ Large","offer_id":49394426216768,"sku":"14470333-4CRYSTAL","price":35.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Large","offer_id":49394426249536,"sku":"14470333-4ARMOR","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ Extra Large","offer_id":49394426282304,"sku":"14470350-4CRYSTAL","price":53.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Extra Large","offer_id":49394426315072,"sku":"14470350-4ARMOR","price":58.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_41484863_22004402_1709676238_1_0.jpg?v=1735424822"},{"product_id":"epic-scale-g3b-missile-launchers-base","title":"Epic-Scale : G3b Missile Launchers (Base)","description":"\u003cp\u003e\u003cstrong\u003eThese power-armored troops are armed with Missile Launchers.\u003c\/strong\u003e They are designed to be compatible with any 6mm Scale games such as Epic 40k or Legions Imperialis. Each model has its own tiny 6mm stand, which can be super glued onto your own base or can fit neatly onto our Epic Spacer Base.* \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP \/ 20 Troops","offer_id":49394425659712,"sku":"14470424-4CRYSTAL","price":20.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 20 Troops","offer_id":49394425692480,"sku":"14470424-4ARMOR","price":21.25,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 40 Troops","offer_id":49394425725248,"sku":"14470425-4CRYSTAL","price":30.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 40 Troops","offer_id":49394425758016,"sku":"14470425-4ARMOR","price":32.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 60 Troops","offer_id":49394425790784,"sku":"14470426-4CRYSTAL","price":41.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 60 Troops","offer_id":49394425823552,"sku":"14470426-4ARMOR","price":44.75,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 100 Troops","offer_id":49394425856320,"sku":"14470427-4CRYSTAL","price":60.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 100 Troops","offer_id":49394425889088,"sku":"14470427-4ARMOR","price":68.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-G3b_Missile-Base_1.png?v=1754518626"},{"product_id":"epic-scale-g3b-tactical-squads-base","title":"Epic-Scale : G3b Tactical Squads (Base)","description":"\u003cp\u003e\u003cstrong\u003eThe G3b power-armor\u003c\/strong\u003e is a slightly heavier style of plate favored by breacher and siege troops. They are armed with Bolters and the Sergeants have a Bolt Pistol and Close Combat weapons. Each squad of 10 includes one standard bearer.  They are designed to be compatible with any 6mm-8mm Scale games such as Epic 40k or Legions Imperialis. Each model has its own tiny 6mm stand, which can be super glued onto your own base or can fit neatly onto our Epic Spacer Base.* \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP \/ 20 Troops","offer_id":49394425299264,"sku":"14470456-4CRYSTAL","price":20.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 20 Troops","offer_id":49394425332032,"sku":"14470456-4ARMOR","price":21.25,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 40 Troops","offer_id":49394425364800,"sku":"14470457-4CRYSTAL","price":27.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 40 Troops","offer_id":49394425397568,"sku":"14470457-4ARMOR","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 60 Troops","offer_id":49394425430336,"sku":"14470459-4CRYSTAL","price":36.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 60 Troops","offer_id":49394425463104,"sku":"14470459-4ARMOR","price":41.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 100 Troops","offer_id":49394425495872,"sku":"14470462-4CRYSTAL","price":54.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 100 Troops","offer_id":49394425528640,"sku":"14470462-4ARMOR","price":63.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-G3-Bolter-Base_1_9f37744b-acc2-4d26-b8e4-3ae37ee1ebf3.png?v=1754520013"},{"product_id":"base-spearman-g3-command-squad-epic","title":"Spear Master : G3a Command Squad  (EPIC)","description":"This set of 5 elite power-armored heroes can add just the right flavor to your Epic marine forces. You get 2 Bodyguards, a Medic, a Company Standard Bearer, and a custom Unit Commander. They are designed to be compatible with any 6mm-8mm Scale games such as Epic 40k or Legions Imperialis. Each model has its own tiny 6mm stand, which can be super glued onto your own base or can fit neatly onto our Epic Spacer Base.* \u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \r\n\u003cbr\u003e\r\n\u003cbr\u003e\r\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49394425200960,"sku":"14470611-4CRYSTAL","price":15.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394425233728,"sku":"14470611-4ARMOR","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_41485182_22004996_1705623571_1_0.jpg?v=1735424816"},{"product_id":"forge-mech-rangers-epic","title":"Forge-Mech: Rangers (EPIC)","description":"NOTE: The \u003cstrong\u003eSIZE\u003c\/strong\u003e Selection Equates to \u003cstrong\u003eQuantity per Sprue\u003c\/strong\u003e, NOT the Products’ Scale.\u003cbr\u003e\r\n\u003cstrong\u003eSmall\u003c\/strong\u003e Sprue = \u003cstrong\u003e20 Troops\u003cbr\u003e\r\nMedium\u003c\/strong\u003e Sprue = \u003cstrong\u003e40 Troops\u003cbr\u003e\r\nLarge\u003c\/strong\u003e Sprue = \u003cstrong\u003e60 Troops\u003cbr\u003e\r\nXLarge \u003c\/strong\u003eSprue = \u003cstrong\u003e100 Troops\u003c\/strong\u003e\u003cbr\u003e\r\n\u003cbr\u003e\r\nThe Forge-Mech Rangers are armed with Rifles and Plasma. They and can be a great substitute for Solar Auxilia troops until more options are available.  They are designed to be compatible with any 6-8mm Scale games such as Epic 40k or Legions Imperialis. Each model has its own tiny 6mm stand, which can be super glued onto your own base or can fit neatly onto our Epic Spacer Base.*\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \r\n\u003cbr\u003e\r\n\u003cbr\u003e\r\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP \/ Small","offer_id":49394422088000,"sku":"14537981-4CRYSTAL","price":18.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Small","offer_id":49394422120768,"sku":"14537981-4ARMOR","price":19.25,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ Medium","offer_id":49394422153536,"sku":"14537983-4CRYSTAL","price":27.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Medium","offer_id":49394422186304,"sku":"14537983-4ARMOR","price":28.75,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ Large","offer_id":49394422219072,"sku":"14537984-4CRYSTAL","price":34.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Large","offer_id":49394422251840,"sku":"14537984-4ARMOR","price":38.0,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ Extra Large","offer_id":49394422284608,"sku":"14537985-4CRYSTAL","price":50.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Extra Large","offer_id":49394422317376,"sku":"14537985-4ARMOR","price":57.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_41582917_22081061_1706909112_1_0.jpg?v=1735424808"},{"product_id":"forge-mech-vanguard-epic","title":"Forge-Mech: Vanguard (EPIC)","description":"NOTE: The \u003cstrong\u003eSIZE\u003c\/strong\u003e Selection Equates to \u003cstrong\u003eQuantity per Sprue\u003c\/strong\u003e, NOT the Products’ Scale.\u003cbr\u003e\r\n\u003cstrong\u003eSmall\u003c\/strong\u003e Sprue = \u003cstrong\u003e20 Troops\u003cbr\u003e\r\nMedium\u003c\/strong\u003e Sprue = \u003cstrong\u003e40 Troops\u003cbr\u003e\r\nLarge\u003c\/strong\u003e Sprue = \u003cstrong\u003e60 Troops\u003cbr\u003e\r\nXLarge\u003c\/strong\u003e Sprue = \u003cstrong\u003e100 Troops\u003c\/strong\u003e\u003cbr\u003e\r\n\u003cbr\u003e\r\nThe Forge-Mech Vanguard are armed with Rad and Arch rifles. They and can be a great substitute for Solar Auxilia troops until more options are available. They are designed to be compatible with any 6-8mm Scale games such as Epic 40k or Legions Imperialis. Each model has its own tiny 6mm stand, which can be super glued onto your own base or can fit neatly onto our Epic Spacer Base.*\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \r\n\u003cbr\u003e\r\n\u003cbr\u003e\r\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP \/ Small","offer_id":49394421793088,"sku":"14537988-4CRYSTAL","price":17.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Small","offer_id":49394421825856,"sku":"14537988-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ Medium","offer_id":49394421858624,"sku":"14538042-4CRYSTAL","price":25.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Medium","offer_id":49394421891392,"sku":"14538042-4ARMOR","price":26.75,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ Large","offer_id":49394421924160,"sku":"14538045-4CRYSTAL","price":31.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Large","offer_id":49394421956928,"sku":"14538045-4ARMOR","price":34.25,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ Extra Large","offer_id":49394421989696,"sku":"14538047-4CRYSTAL","price":45.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Extra Large","offer_id":49394422022464,"sku":"14538047-4ARMOR","price":51.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_41582892_22081136_1706908968_1_0.jpg?v=1735424806"},{"product_id":"base-g3b-plasma-gun-squads-epic","title":"Base : G3b Plasma Gun Squads (EPIC)","description":"\u003cp\u003e\u003cstrong\u003eThese power-armored support troops are armed with Plasma Guns.\u003c\/strong\u003e They are designed to be compatible with any 6mm-8mm Scale games such as Epic 40k or Legions Imperialis. Each model has its own tiny 6mm stand, which can be super glued onto your own base or can fit neatly onto our Epic Spacer Base.* \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP \/ 20 Troops","offer_id":49394416386368,"sku":"14680821-4CRYSTAL","price":19.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 20 Troops","offer_id":49394416419136,"sku":"14680821-4ARMOR","price":20.25,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 40 Troops","offer_id":49394416451904,"sku":"14680822-4CRYSTAL","price":28.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 40 Troops","offer_id":49394416484672,"sku":"14680822-4ARMOR","price":30.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 60 Troops","offer_id":49394416517440,"sku":"14680823-4CRYSTAL","price":36.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 60 Troops","offer_id":49394416550208,"sku":"14680823-4ARMOR","price":41.0,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 100 Troops","offer_id":49394416582976,"sku":"14680825-4CRYSTAL","price":55.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 100 Troops","offer_id":49394416615744,"sku":"14680825-4ARMOR","price":61.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-G3b_Plasma-Base_1.png?v=1754517967"},{"product_id":"base-g3b-breacher-squads-epic","title":"Base : G3b Breacher Squads (EPIC)","description":"\u003cp\u003e\u003cstrong\u003eThe G3b power-armor is a slightly heavier style of plate favored by siege troops.\u003c\/strong\u003e These Breachers carry heavy Boarding Shields and are armed with Bolters. They are designed to be compatible with any 6mm-8mm Scale games such as Epic 40k or Legions Imperialis.  Our customer find these make great thematic legionary troops for their Iron Warriors, Imperial Fists, or to easily idenity secondary detachments. Each model has its own tiny 6mm stand, which can be super glued onto your own base or can fit neatly onto our Epic Spacer Base.* \u003cbr\u003e\u003cbr\u003e\u003cem\u003eOptional Breacher Squad Rule:\u003c\/em\u003e This unit can reroll a failed armor save but, it must also reduce it's base movement by 1 inch.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP \/ 20 Troops","offer_id":49394415731008,"sku":"14681053-4CRYSTAL","price":22.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 20 Troops","offer_id":49394415763776,"sku":"14681053-4ARMOR","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 40 Troops","offer_id":49394415796544,"sku":"14681054-4CRYSTAL","price":30.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 40 Troops","offer_id":49394415829312,"sku":"14681054-4ARMOR","price":33.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 60 Troops","offer_id":49394415862080,"sku":"14681055-4CRYSTAL","price":40.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 60 Troops","offer_id":49394415894848,"sku":"14681055-4ARMOR","price":44.75,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 100 Troops","offer_id":49394415927616,"sku":"14681056-4CRYSTAL","price":59.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 100 Troops","offer_id":49394415960384,"sku":"14681056-4ARMOR","price":67.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-G3b-Breachers-Base_1.png?v=1754517323"},{"product_id":"seige-master-g3b-command-squad-epic","title":"Seige Master : G3b Command Squad  (EPIC)","description":"This set of 5 elite power-armored heroes can add just the right flavor to your Epic marine forces. You get 2 Bodyguards, a Medic, a Company Standard Bearer, and a custom Unit Commander. They are designed to be compatible with any 6mm-8mm Scale games such as Epic 40k or Legions Imperialis. Each model has its own tiny 6mm stand, which can be super glued onto your own base or can fit neatly onto our Epic Spacer Base.* \u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \r\n\u003cbr\u003e\r\n\u003cbr\u003e\r\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49394415665472,"sku":"14681147-4CRYSTAL","price":15.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394415698240,"sku":"14681147-4ARMOR","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_41758827_22246888_1709353060_1_0.jpg?v=1735424757"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/collections\/Icon-FullModels.png?v=1753387902","url":"https:\/\/popgoesthemonkey.com\/en-jp\/collections\/custom-full-models\/parts_inf-terminators+weapons_modifications+armor_term-chaos+faction_humanity.oembed","provider":"Pop Goes the Monkey","version":"1.0","type":"link"}