{"title":"Iron Wolf Minis","description":"","products":[{"product_id":"iron-wolf-frost-cannon","title":"Iron Wolf - Wolf Head","description":"\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eThe Iron Wolf Head\u003c\/strong\u003e These pieces replace the stock face mask, robot skull head, and cowl. This accessory component is compatible ONLY with Questor class Knights. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching Instructions\u003c\/strong\u003e\u003cbr\u003e1) Glue the wire bundle to the section where the head is normally attached.\u003cbr\u003e2) I have designed the head to swivel, and be removable by using small magnets.\u003cbr\u003e3) I have included the link to these magnets \u003ca href=\"https:\/\/themagnetbaron.com\/collections\/super-magnets\/products\/100pcs-1-8-x-1-8-rare-earth-disc-magnets\" title=\"Head-Magnets\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ehere\u003c\/a\u003e. Two of these small 3mm magnets are required.\u003cbr\u003e4) The two small pipes that normally link to the front of the skull head can be glued onto this replacement head instead.\u003cbr\u003e5) You can also glue the head in place and skip the magnets completely, though it WILL NOT rotate.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese parts have been designed by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e, and have been licensed for a limited time, to Pop Goes the Monkey.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50046192943424,"sku":"30200001-4MR3","price":13.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":50046192976192,"sku":"30200000-4ARMOR","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Q001_Preview.151.png?v=1735423781"},{"product_id":"iron-wolf-head","title":"Iron Wolf- Frost Cannon","description":"\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eThe Iron Wolf Frost Cannon\u003c\/strong\u003e replaces the stock cannon included with the model. This accessory component is compatible ONLY with Questor class Knights. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese parts have been designed by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e, and have been licensed for a limited time, to Pop Goes the Monkey.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAttaching Instructions for Cannon\u003cbr\u003e\u003c\/strong\u003e1) Glue the cannon into place, where the stock long range weapon mounts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50051676307776,"sku":"30200003-4MR3","price":13.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":50051676340544,"sku":"30200004-4ARMOR","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Q003_Preview.png?v=1735423779"},{"product_id":"anubis-head","title":"Egyptian Knight - Anubis Head","description":"\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eThe Egyptian Knight Anubis Head\u003c\/strong\u003e replaces the stock face mask, robot skull head, and cowl. This accessory component is compatible with Questor and Dominion class Knights. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching Instructions\u003c\/strong\u003e\u003cbr\u003e1) Glue the wire bundle to the section where the head is normally attached.\u003cbr\u003e2) I have designed the head to swivel, and be removable by using small magnets.\u003cbr\u003e3) I have included the link to these magnets \u003ca href=\"https:\/\/themagnetbaron.com\/collections\/super-magnets\/products\/100pcs-1-8-x-1-8-rare-earth-disc-magnets\" title=\"Head-Magnets\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ehere\u003c\/a\u003e. Two of these small 3mm magnets are required.\u003cbr\u003e4) The two small pipes that normally link to the front of the skull head can be glued onto this replacement head instead.\u003cbr\u003e5) You can also glue the head in place and skip the magnets completely, though it WILL NOT rotate.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese parts have been designed by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e, and have been licensed for a limited time, to Pop Goes the Monkey.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50051737944384,"sku":"30200025-4MR3","price":14.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":50051737977152,"sku":"30200024-4ARMOR","price":22.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Q019_Preview.png?v=1735423777"},{"product_id":"eagle-head","title":"Custodian Knight - Eagle Head","description":"\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eThe Custodian Knight Eagle Head\u003c\/strong\u003e replaces the stock face mask, robot skull head, and cowl. This accessory component is compatible with Questor and Dominion class Knights. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching Instructions\u003c\/strong\u003e\u003cbr\u003e1) Glue the wire bundle to the section where the head is normally attached.\u003cbr\u003e2) I have designed the head to swivel, and be removable by using small magnets.\u003cbr\u003e3) I have included the link to these magnets \u003ca rel=\"noopener noreferrer\" title=\"Head-Magnets\" href=\"https:\/\/themagnetbaron.com\/collections\/super-magnets\/products\/100pcs-1-8-x-1-8-rare-earth-disc-magnets\" target=\"_blank\"\u003ehere\u003c\/a\u003e. Two of these small 3mm magnets are required.\u003cbr\u003e4) The two small pipes that normally link to the front of the skull head can be glued onto this replacement head instead.\u003cbr\u003e5) You can also glue the head in place and skip the magnets completely, though it WILL NOT rotate.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese parts have been designed by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e, and have been licensed for a limited time, to Pop Goes the Monkey.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50051741712704,"sku":"30200014-4MR3","price":13.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":50051741745472,"sku":"30200015-4ARMOR","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Q008_Preview.png?v=1735423775"},{"product_id":"iron-wolf-feet","title":"Iron Wolf - Wolf Feet","description":"\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eThe Iron Wolf Feet\u003c\/strong\u003e replace the stock feet included with the model. This accessory component is compatible ONLY with Questor class Knights. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching instructions:\u003c\/strong\u003e\u003cbr\u003eThere is a LEFT and RIGHT foot, and are identified with the letters L and R in the piece's sockets. Each should be glued in place of the stock feet so the toes point slightly outward. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese parts have been designed by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e, and have been licensed for a limited time, to Pop Goes the Monkey.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50051745153344,"sku":"30200002-4MR3","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Q002_Preview.png?v=1735423773"},{"product_id":"iron-wolf-knee-pads","title":"2x Iron Wolf - Knee Pads","description":"\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eThe Iron Wolf Knee Pads\u003c\/strong\u003e replace the stock knee pads, and fit both the left and right knees. This accessory component is compatible ONLY with Questor class Knights. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching Instructions\u003c\/strong\u003e\u003cbr\u003e1) Glue the knee pads in the location where the stock knee pads typically fit.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese parts have been designed by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e, and have been licensed for a limited time, to Pop Goes the Monkey.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50051814293824,"sku":"30200006-4MR3","price":10.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":50051814326592,"sku":"30200005-4ARMOR","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Q004_Preview.png?v=1735423772"},{"product_id":"iron-wolf-left-wolf-shoulder-pad","title":"Iron Wolf - (Left) Wolf Shoulder Pad","description":"\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eThe Iron Wolf Left Shoulder Pad \u003c\/strong\u003ereplaces the stock left-side shoulder pad. This accessory component is compatible ONLY with Questor class Knights. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese parts have been designed by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e, and have been licensed for a limited time, to Pop Goes the Monkey.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50051817668928,"sku":"30200009-4MR3","price":13.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":50051817701696,"sku":"30200010-4ARMOR","price":22.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Q006_Preview.png?v=1735423770"},{"product_id":"iron-wolf-right-wolf-shoulder-pad","title":"Iron Wolf - (Right) Wolf Shoulder Pad","description":"\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eThe Iron Wolf Right Shoulder Pad \u003c\/strong\u003ereplaces the stock right-side shoulder pad. This accessory component is compatible ONLY with Questor class Knights. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching Instructions:\u003c\/strong\u003e\u003cbr\u003eThe shoulder pad fits on the right side of the model, where the stock shoulder pad is meant to fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese parts have been designed by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e, and have been licensed for a limited time, to Pop Goes the Monkey.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50051819700544,"sku":"30200007-4MR3","price":13.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":50070792307008,"sku":"30200008-4ARMOR","price":22.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Q005_Preview.png?v=1735423768"},{"product_id":"egyptian-knight-khopesh-close-combat-weapon","title":"Egyptian Knight - Khopesh Close Combat Weapon","description":"\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eThe Egyptian Knight Khopesh Close Combat Weapon\u003c\/strong\u003e replaces the stock close combat weapon included with the model. This accessory component is compatible ONLY with Questor class Knights. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese parts have been designed by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e, and have been licensed for a limited time, to Pop Goes the Monkey.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50051820814656,"sku":"30200041-4MR3","price":17.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":50051820847424,"sku":"30200040-4ARMOR","price":27.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Q052_Preview.png?v=1735589831"},{"product_id":"missile-launchers","title":"Quester Knight: Streamline Missile Pods (L\u0026R)","description":"\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eThe Streamline Missile Launchers\u003c\/strong\u003e replace the machine gun + shield component included with the model. This accessory component is compatible ONLY with Questor class Knights. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese parts have been designed by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e, and have been licensed for a limited time, to Pop Goes the Monkey.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50051822453056,"sku":"30200013-4MR3","price":13.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":50051822485824,"sku":"30200012-4ARMOR","price":25.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Q007_Preview.png?v=1735423765"},{"product_id":"custodian-knight-plain-shoulder-pad","title":"Custodian Knight - Universal Shoulder Pad(s)","description":"\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eThe Custodian Knight Universal Shoulder Pad\u003c\/strong\u003e replaces the stock shoulder pad provided with the kit. \u003cspan style=\"text-decoration: underline;\"\u003eThis shoulder pad fits on both sides of the model. \u003c\/span\u003eThis accessory component is compatible with ONLY Questor class Knights. \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese parts have been designed by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e, and have been licensed for a limited time, to Pop Goes the Monkey.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3 \/ Just 1","offer_id":50051825860928,"sku":"30200027-4MR3","price":13.5,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3 \/ 2 Pack","offer_id":50098465112384,"sku":"30200028-4MR3","price":20.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Just 1","offer_id":50051825893696,"sku":"30200026-4ARMOR","price":23.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Q016_Preview.png?v=1735423763"},{"product_id":"custodian-knight-banner-shoulder-pad","title":"Custodian Knight - 2x Shin Plates","description":"\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eThe Custodian Knight Shin Plates\u003c\/strong\u003e replace the stock shin plates provided with the kit. This accessory component is compatible with ONLY Questor class Knights. \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese parts have been designed by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e, and have been licensed for a limited time, to Pop Goes the Monkey.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50051833004352,"sku":"30200029-4MR3","price":17.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":50051833037120,"sku":"30200030-4ARMOR","price":36.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Q014_Preview.png?v=1735423761"},{"product_id":"custodian-knight-2x-knee-fan-plates","title":"Custodian Knight - Hip Plates (L\u0026R)","description":"\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eThe Custodian Knight Hip Plates\u003c\/strong\u003e May be attached to the top portion of the Knight's hip area. This accessory component is compatible ONLY with Questor class Knights. \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese parts have been designed by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e, and have been licensed for a limited time, to Pop Goes the Monkey. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50051834675520,"sku":"30200023-4MR3","price":10.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":50051834708288,"sku":"30200022-4ARMOR","price":20.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Q012_Preview.png?v=1735423759"},{"product_id":"custodian-knight-2x-toe-guards","title":"Custodian Knight - 2x Toe Guards","description":"\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eThe Custodian Knight Toe Guards\u003c\/strong\u003e May be attached to the top of each toe. You may purchase multiple kits to apply Toe Guards to all of the models toes. This accessory component is compatible ONLY with Questor class Knights. \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese parts have been designed by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e, and have been licensed for a limited time, to Pop Goes the Monkey. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50051842638144,"sku":"30200033-4MR3","price":11.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":50051842670912,"sku":"30200034-4ARMOR","price":22.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Q018_Preview.png?v=1735423758"},{"product_id":"custodian-knight-knightly-face-mask","title":"Custodian Knight - Knightly Face Mask","description":"\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eThe Custodian Knight Face Mask\u003c\/strong\u003e replaces the stock masks which are included in the kit. This accessory component is compatible ONLY with Questor class Knights. \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese parts have been designed by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e, and have been licensed for a limited time, to Pop Goes the Monkey. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3 \/ Open","offer_id":50051847291200,"sku":"30200017-4MR3","price":9.5,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3 \/ Solid","offer_id":50074629833024,"sku":"30200019-4MR3","price":9.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Open","offer_id":50051847323968,"sku":"30200003-4ARMOR","price":10.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Solid","offer_id":50074629865792,"sku":"30200018-4ARMOR","price":10.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Q009B_Preview_ab782203-cd06-4143-adf2-f08f71f00780.png?v=1735423755"},{"product_id":"custodian-knight-eagle-claws","title":"Custodian Knight - Eagle Claws","description":"\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eThe Custodian Knight Eagle Claws\u003c\/strong\u003e replace the stock fingers and thumb included with the kit. This accessory component is compatible ONLY with Questor class Knights. \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese parts have been designed by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e, and have been licensed for a limited time, to Pop Goes the Monkey. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50051854008640,"sku":"30200021-4MR3","price":10.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":50051854041408,"sku":"30200020-4ARMOR","price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Claw_1.png?v=1735423753"},{"product_id":"custodian-knight-crotch-plate","title":"Custodian Knight - Crotch Plate","description":"\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eThe Custodian Knight Crotch Plate\u003c\/strong\u003e replaces the stock crotch plate included with the kit. This accessory component is compatible ONLY with Questor class Knights. \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese parts have been designed by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e, and have been licensed for a limited time, to Pop Goes the Monkey. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50051858596160,"sku":"30200031-4MR3","price":10.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":50051858628928,"sku":"30200032-4ARMOR","price":13.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Q015_Preview.png?v=1735423752"},{"product_id":"iron-wolf-wolf-conversion-kit","title":"Iron Wolf - Wolf Conversion Kit","description":"\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eThe Iron Wolf Conversion Kit\u003c\/strong\u003e is a comprehensive bundle of components specifically for Questor Class Knights, which include:\u003cbr\u003e- Iron Wolf Head\u003cbr\u003e- Iron Wolf Shoulder Pad (Right)\u003cbr\u003e- Iron Wolf Shoulder Pad (Left)\u003cbr\u003e- Iron Wolf Frost Cannon\u003cbr\u003e- A set of Iron Wolf Knee Pads\u003cbr\u003e- Pair of Iron Wolf Feet\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching Instructions for head\u003c\/strong\u003e\u003cbr\u003e1) Glue the wire bundle to the section where the head is normally attached.\u003cbr\u003e2) I have designed the head to swivel, and be removable by using small magnets.\u003cbr\u003e3) I have included the link to these magnets \u003ca href=\"https:\/\/themagnetbaron.com\/collections\/super-magnets\/products\/100pcs-1-8-x-1-8-rare-earth-disc-magnets\" title=\"Head-Magnets\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ehere\u003c\/a\u003e. Two of these small 3mm magnets are required.\u003cbr\u003e4) The two small pipes that normally link to the front of the skull head can be glued onto this replacement head instead.\u003cbr\u003e5) You can also glue the head in place and skip the magnets completely, though it WILL NOT rotate.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAttaching Instructions for Cannon\u003cbr\u003e\u003c\/strong\u003eAssemble the Cannon where the stock long range weapon is meant to fit.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eAttaching Instructions for Knee Pads\u003c\/strong\u003e\u003cbr\u003eAssemble the knee pads in the location where the stock knee pads typically fit.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching instructions for Feet:\u003c\/strong\u003e\u003cbr\u003eThere is a LEFT and RIGHT foot, and are identified with the letters L and R in the piece's sockets. Each should be glued in place of the stock feet so the toes point slightly outward. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching Instructions for Left \u0026amp; Right Shoulder Pads:\u003c\/strong\u003e\u003cbr\u003eThe shoulder pad fits on the right and left side of the model respectively, where the stock shoulder pad is meant to fit.\u003cbr\u003e\u003cbr\u003eThese parts have been designed by \u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e, and have been licensed for a limited time, to Pop Goes the Monkey.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50063703376192,"sku":"30200011-4MR3","price":58.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Wolf_Kit_Preview.png?v=1735423735"},{"product_id":"custodian-knight-knightly-conversion-kit-style-1","title":"Custodian Knight - Knightly Conversion Kit","description":"\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eThe Iron Wolf Conversion Kit\u003c\/strong\u003e is a comprehensive bundle of components specifically for Questor Class Knights, which include:\u003cbr\u003e- Knightly mask\u003cbr\u003e- Custodian Shoulder pad plain\u003cbr\u003e- Custodian Shoulder Pad with Banner\u003cbr\u003e- Set of Eagle Claws\u003cbr\u003e- Crotch Plate\u003cbr\u003e- Set of Hip Plates\u003cbr\u003e- Set of Knee Fan Plates\u003cbr\u003e- Set of Shin Plates\u003cbr\u003e- Set of Toe Guards \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching Instructions for head\u003c\/strong\u003e\u003cbr\u003eThis component replaces the stock mask which is meant to cover the robot skull beneath.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAttaching Instructions for Eagle Claws\u003cbr\u003e\u003c\/strong\u003eThe Fingers and Thumb fit into the slots found on the stock Powerful Fist found on the model.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eAttaching Instructions for Crotch Plate\u003c\/strong\u003e\u003cbr\u003eAssemble the Crotch plate in the location where the stock plate typically fit.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching instructions for Hip Plates:\u003c\/strong\u003e\u003cbr\u003eMay be attached to the top portion of the Knight's hip area.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching instructions for Shin Plates:\u003c\/strong\u003e\u003cbr\u003eThese replace the stock shin plates just above the feet. Note they may collide with the stock knee pads included with the model.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching instructions for Knee Fan plates:\u003c\/strong\u003e\u003cbr\u003eThese pieces may be attached on the round knee joint but may fit elsewhere on the model.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching instructions for Toe Guards:\u003c\/strong\u003e\u003cbr\u003ePlace these plates over the top of the models individual toes.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching Instructions for Left \u0026amp; Right Shoulder Pads:\u003c\/strong\u003e\u003cbr\u003eThe shoulder pad fits on the right and left side of the model interchangeably, where the stock shoulder pads are meant to fit.\u003cbr\u003e\u003cbr\u003eThese parts have been designed by \u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e, and have been licensed for a limited time, to Pop Goes the Monkey.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50063789785408,"sku":"30200036-4MR3","price":75.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Cust_Kit_3_Preview_2e235b1f-4146-426d-9315-47dbd6df31ef.png?v=1735423732"},{"product_id":"custodian-knight-eagle-conversion-kit","title":"Custodian Knight - Eagle Conversion Kit","description":"\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eThe Iron Wolf Conversion Kit\u003c\/strong\u003e is a comprehensive bundle of components specifically for Questor Class Knights, which include:\u003cbr\u003e- Custodian Eagle Head\u003cbr\u003e- Custodian Shoulder pad plain\u003cbr\u003e- Custodian Shoulder Pad with Banner\u003cbr\u003e- Set of Eagle Claws\u003cbr\u003e- Crotch Plate\u003cbr\u003e- Set of Hip Plates\u003cbr\u003e- Set of Knee Fan Plates\u003cbr\u003e- Set of Shin Plates\u003cbr\u003e- Set of Toe Guards \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching Instructions for head\u003c\/strong\u003e\u003cbr\u003e1) Glue the wire bundle to the section where the head is normally attached.\u003cbr\u003e2) I have designed the head to swivel, and be removable by using small magnets.\u003cbr\u003e3) I have included the link to these magnets \u003ca rel=\"noopener noreferrer\" title=\"Head-Magnets\" href=\"https:\/\/themagnetbaron.com\/collections\/super-magnets\/products\/100pcs-1-8-x-1-8-rare-earth-disc-magnets\" target=\"_blank\"\u003ehere\u003c\/a\u003e. Two of these small 3mm magnets are required.\u003cbr\u003e4) The two small pipes that normally link to the front of the skull head can be glued onto this replacement head instead.\u003cbr\u003e5) You can also glue the head in place and skip the magnets completely, though it WILL NOT rotate.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAttaching Instructions for Eagle Claws\u003cbr\u003e\u003c\/strong\u003eThe Fingers and Thumb fit into the slots found on the stock Powerful Fist found on the model.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eAttaching Instructions for Crotch Plate\u003c\/strong\u003e\u003cbr\u003eAssemble the Crotch plate in the location where the stock plate typically fit.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching instructions for Hip Plates:\u003c\/strong\u003e\u003cbr\u003eMay be attached to the top portion of the Knight's hip area.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching instructions for Shin Plates:\u003c\/strong\u003e\u003cbr\u003eThese replace the stock shin plates just above the feet. Note they may collide with the stock knee pads included with the model.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching instructions for Knee Fan plates:\u003c\/strong\u003e\u003cbr\u003eThese pieces may be attached on the round knee joint but may fit elsewhere on the model.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching instructions for Toe Guards:\u003c\/strong\u003e\u003cbr\u003ePlace these plates over the top of the models individual toes.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching Instructions for Left \u0026amp; Right Shoulder Pads:\u003c\/strong\u003e\u003cbr\u003eThe shoulder pad fits on the right and left side of the model interchangeably, where the stock shoulder pads are meant to fit.\u003cbr\u003e\u003cbr\u003eThese parts have been designed by \u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e, and have been licensed for a limited time, to Pop Goes the Monkey.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50063824224576,"sku":"30200035-4MR3","price":80.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Cust_Kit_1_Preview.png?v=1735423730"},{"product_id":"custodian-knight-scrolled-univ-shoulder-pads","title":"Custodian Knight - Scrolled Univ. Shoulder Pad(s)","description":"\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eThe Custodian Knight Universal Shoulder Pad\u003c\/strong\u003e replaces the stock shoulder pad provided with the kit. \u003cspan style=\"text-decoration: underline;\"\u003eThis shoulder pad fits on both sides of the model. \u003c\/span\u003eThis accessory component is compatible with ONLY Questor class Knights. \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese parts have been designed by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e, and have been licensed for a limited time, to Pop Goes the Monkey.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3 \/ Just 1","offer_id":50100993294656,"sku":"30200038-4MR3","price":13.5,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3 \/ 2 Pack","offer_id":50100993327424,"sku":"30200039-4MR3","price":20.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Just 1","offer_id":50100993360192,"sku":"30200037-4ARMOR","price":23.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-ScrolledUnivPad-00.png?v=1735587609"},{"product_id":"iron-wolf-mini-wolf-conversion-kit-frost-spear-gun","title":"Squire Knight - Iron Wolf Conversion Kit w\/Frost Spear Gun","description":"\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003eOur customers have found the\u003cstrong\u003e Iron Wolf Conversion Kit\u003c\/strong\u003e is a comprehensive bundle of parts that are compatible with Armiger class Knights or similar shaped models. It includes the following \u003cmeta charset=\"utf-8\"\u003ecomponents:\u003cbr\u003e\u003cbr\u003e- Iron Wolf Head \u0026amp; Cowl\u003cbr\u003e- \u003cmeta charset=\"utf-8\"\u003eIron Wolf Shoulder Pad (marks)\u003cbr\u003e- \u003cmeta charset=\"utf-8\"\u003eIron Wolf Shoulder Pad (plain)\u003cbr\u003e- A set of \u003cmeta charset=\"utf-8\"\u003eIron Wolf Feet \u0026amp; Shin Guards\u003cbr\u003e- A Squire Wolf Frost Spear Gun\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching Instructions\u003cbr\u003e\u003c\/strong\u003eEach component will fit exactly where its stock counterpart should go on the model. Note that the shoulder pads are interchangeable (they can be used on either side of the model). The frost spear gun may also be used on either side of the model.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003eThese parts have been designed by \u003ca href=\"https:\/\/ironwolfminis.com\/\" title=\"Link to Iron Wolf Minis\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e,\u003c\/a\u003e and have been licensed for a limited time, to Pop Goes the Monkey.\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":51247108817216,"sku":"30200062-4MR3","price":34.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Arm_Wolf_Kit_1_Preview.png?v=1762291566"},{"product_id":"iron-wolf-mini-wolf-conversion-kit-rotary-guns","title":"Squire Knight - Iron Wolf Conversion Kit w\/Rotary Guns","description":"\u003cp\u003e\u003cspan\u003eOur customers have found the\u003cstrong\u003e Iron Wolf Conversion Kit\u003c\/strong\u003e is a comprehensive bundle of parts that are compatible with Armiger class Knights or similar shaped models. It includes the following \u003cmeta charset=\"utf-8\"\u003ecomponents:\u003cbr\u003e\u003cbr\u003e- Iron Wolf Head \u0026amp; Cowl\u003cbr\u003e- \u003cmeta charset=\"utf-8\"\u003eIron Wolf Shoulder Pad (marks)\u003cbr\u003e- \u003cmeta charset=\"utf-8\"\u003eIron Wolf Shoulder Pad (plain)\u003cbr\u003e- A set of \u003cmeta charset=\"utf-8\"\u003eIron Wolf Feet \u0026amp; Shin Guards\u003cbr\u003e- Squire Rotary Guns (left \u0026amp; right)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching Instructions\u003cbr\u003e\u003c\/strong\u003eEach component will fit exactly where its stock counterpart should go on the model. Note that the shoulder pads are interchangeable (they can be used on either side of the model). \u003cmeta charset=\"utf-8\"\u003eThe rotary guns should be attached so that the ammunition drums are on the outside, so they do not rub against the side of the model's body.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003eThese parts have been designed by \u003ca href=\"https:\/\/ironwolfminis.com\/\" title=\"Link to Iron Wolf Minis\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e,\u003c\/a\u003e and have been licensed for a limited time, to Pop Goes the Monkey.\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":51247127134528,"sku":"30200061-4MR3","price":42.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Arm_Rotary_Kit.png?v=1762291822"},{"product_id":"iron-wolf-mini-wolf-head-cowl","title":"Squire Knight - Iron Wolf Head \u0026 Cowl","description":"\u003cp\u003e\u003cspan\u003eOur customers have found these accessory components are compatible with Armiger class Knights or similar shaped models. This head and cowl replace the stock head and cowl.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching Instructions\u003c\/strong\u003e\u003cbr\u003eWARNING! This head will NOT fit inside the standard cowl which is provided with the kit, as it is far too tight!\u003cbr\u003e1) Glue the cowl into place, where the normal cowl would usually sit.\u003cbr\u003e2) Insert the peg on the top of the head into the hole on the underside of the carapace armor, similar to how the standard kit should be built.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese parts have been designed by\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/ironwolfminis.com\/\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e,\u003c\/a\u003e and have been licensed for a limited time, to Pop Goes the Monkey.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":51247140176192,"sku":"30200060-4MR3","price":11.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Arm_Wolf_Head_1_Preview.png?v=1762292015"},{"product_id":"iron-wolf-mini-wolf-feet-shin-guards","title":"Squire Knight - Iron Wolf Feet \u0026 Shin Guards","description":"\u003cp\u003e\u003cspan\u003eOur customers have found these accessory components are compatible with Armiger class Knights or similar shaped models. These feet and shin guards replace the stock feet and shin guards.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching Instructions\u003c\/strong\u003e\u003cbr\u003e1) Attach the feet to the bottom of the model's legs.\u003cbr\u003e2) The shin plates rest on top of the feet, in a small slot.\u003cbr\u003e3) The small shin plates can be left standing straight up, or tilted backwards slightly so they rest against the piston of the leg.\u003cbr\u003e4) Once positioned glue into place.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese parts have been designed by\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener\" href=\"https:\/\/ironwolfminis.com\/\" target=\"_blank\"\u003e\u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e\u003c\/a\u003e, and have been licensed for a limited time, to Pop Goes the Monkey.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":51247155773760,"sku":"30200059-4MR3","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Arm_Wolf_feet_1_Preview.png?v=1762292277"},{"product_id":"iron-wolf-mini-wolf-shoulder-pad-pack-marks","title":"Pack Marks - Iron Wolf Squire Knight Pauldron","description":"\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eSquire Knight Pauldrons\u003c\/strong\u003e are shoulder pads that will fit a full-size Armiger\/ War Dogs or similar shaped models. They are meant to easily personalize your model by providing a raised emblem for easy painting and to ensures a consistent and uniform appearance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching Instructions\u003c\/strong\u003e\u003cbr\u003eSimply glue the shoulder pad in place, where the stock shoulder pad normally sits. This shoulder pad can fit onto either side of the body.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese parts have been designed by\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener\" href=\"https:\/\/ironwolfminis.com\/\" target=\"_blank\"\u003e\u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e\u003c\/a\u003e, and have been licensed for a limited time, to Pop Goes the Monkey.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3 \/ Just 1","offer_id":51247163343168,"sku":"30200057-4MR3","price":11.0,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3 \/ 2 Pauldrons","offer_id":51324028911936,"sku":"30200058-4MR3","price":15.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ Just 1","offer_id":51324028944704,"sku":"30200056-4CRYSTAL","price":13.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Just 1","offer_id":51247163375936,"sku":"30200056-4ARMOR","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Arm_Wolf_Mark_Pad_1_Preview.png?v=1762292409"},{"product_id":"iron-wolf-mini-wolf-shoulder-pad-plain","title":"Plain - Iron Wolf Squire Knight Pauldron","description":"\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eSquire Knight Pauldrons\u003c\/strong\u003e are shoulder pads that will fit a full-size Armiger\/ War Dogs or similar shaped models. They are meant to easily personalize your model by providing a raised emblem for easy painting and to ensures a consistent and uniform appearance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching Instructions\u003c\/strong\u003e\u003cbr\u003eSimply glue the shoulder pad in place, where the stock shoulder pad normally sits. This shoulder pad can fit onto either side of the body.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese parts have been designed by\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/ironwolfminis.com\/\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e\u003c\/a\u003e, and have been licensed for a limited time, to Pop Goes the Monkey.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3 \/ Just 1","offer_id":51247167897920,"sku":"30200054-4MR3","price":11.0,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3 \/ 2 Pauldrons","offer_id":51323849670976,"sku":"30200055-4MR3","price":15.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ Just 1","offer_id":51323852128576,"sku":"30200053-4CRYSTAL","price":13.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ Just 1","offer_id":51247167930688,"sku":"30200053-4ARMOR","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Arm_Wolf_Plain_Pad_1_Preview.png?v=1762292497"},{"product_id":"iron-wolf-mini-wolf-frost-spear-gun","title":"Iron Wolf - Squire Frost Spear Gun","description":"\u003cp\u003e\u003cspan\u003eOur customers have found these accessory components are compatible with Armiger class Knights. This ranged weapon replaces the stock arm-mounted ranged weapon, and can be used on either side of the model.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching Instructions\u003c\/strong\u003e\u003cbr\u003e1) Insert the lower portion of the gun arm from the stock kit into the half-slot of the Frost Spear Gun.\u003cbr\u003e2) Glue the cut out section of the gun into place, trapping the arm itself inside, while allowing it to still rotate.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese parts have been designed by\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener\" href=\"https:\/\/ironwolfminis.com\/\" target=\"_blank\"\u003e\u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e\u003c\/a\u003e, and have been licensed for a limited time, to Pop Goes the Monkey.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":51247174418752,"sku":"30200052-4MR3","price":15.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Arm_Frost_Can_1_Preview.png?v=1762292631"},{"product_id":"iron-wolf-mini-rotary-gun-left","title":"Iron Wolf - Squire Rotary Gun (Left)","description":"\u003cp\u003e\u003cspan\u003eOur customers have found these accessory components are compatible with Armiger class Knights. It replaces the stock arm-mounted ranged weapon, and is meant to be used on the \u003cstrong\u003eLEFT SIDE \u003c\/strong\u003eof the model so that it will not rub against the side of the model's body.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching Instructions\u003c\/strong\u003e\u003cbr\u003e1) Insert the lower portion of the gun arm from the stock kit into the half-slot of the Rotary Gun.\u003cbr\u003e2) Glue the cut out section of the gun into place, trapping the arm itself inside, while allowing it to still rotate.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese parts have been designed by\u003ca href=\"https:\/\/ironwolfminis.com\/\" title=\"Link to Iron Wolf Minis site\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e\u003c\/a\u003e, and have been licensed for a limited time, to Pop Goes the Monkey.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":51247182774592,"sku":"30200043-4MR3","price":16.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Arm_Rotary_L_1_Preview.png?v=1762292666"},{"product_id":"iron-wolf-mini-rotary-gun-right","title":"Iron Wolf - Squire Rotary Gun (Right)","description":"\u003cp\u003e\u003cspan\u003eOur customers have found these accessory components are compatible with Armiger class Knights. It replaces the stock arm-mounted ranged weapon, and is meant to be used on the \u003cstrong\u003eRIGHT SIDE \u003c\/strong\u003eof the model so that it will not rub against the side of the model's body.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching Instructions\u003c\/strong\u003e\u003cbr\u003e1) Insert the lower portion of the gun arm from the stock kit into the half-slot of the Rotary Gun.\u003cbr\u003e2) Glue the cut out section of the gun into place, trapping the arm itself inside, while allowing it to still rotate.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese parts have been designed by\u003ca rel=\"noopener\" title=\"Link to Iron Wolf Minis site\" href=\"https:\/\/ironwolfminis.com\/\" target=\"_blank\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e\u003c\/a\u003e, and have been licensed for a limited time, to Pop Goes the Monkey.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":51247194538304,"sku":"30200042-4MR3","price":16.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Arm_Rotary_R_1_Preview.png?v=1762292742"},{"product_id":"iron-wolf-mini-armadillo-carapace","title":"Iron Wolf - Armadillo : Squire Carapace","description":"\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003eOur customers have found these accessory components are compatible with Armiger class Knights. This armored carapace replaces the stock carapace included with the kit.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching Instructions\u003c\/strong\u003e\u003cbr\u003e1) Butt the carapace up against the back of the stock cowl for best alignment.\u003cbr\u003e2) Center the armor side-to-side on top of the main body, and then glue it into position.\u003cbr\u003e3) Glue the shoulder pads and gun into place on top of the carapace.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese parts have been designed by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e, and have been licensed for a limited time, to Pop Goes the Monkey.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":51247204434240,"sku":"30200050-4MR3","price":15.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":51247204467008,"sku":"30200051-4CRYSTAL","price":23.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Arm_Carapce.png?v=1762292852"},{"product_id":"iron-wolf-mini-torso-extender","title":"Iron Wolf - Squire Torso Extender","description":"\u003cp\u003e\u003cspan\u003eOur customers have found these accessory components are compatible with Armiger class Knights. This part does not replace any existing component, but rather is sandwiched between the legs and torso of the model to make it taller.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching Instructions\u003c\/strong\u003e\u003cbr\u003eGlue the extender to the bottom of the torso, so the rear piston ends sandwich the cylindrical detail near the back of the model.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese parts have been designed by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e, and have been licensed for a limited time, to Pop Goes the Monkey.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":51247209972032,"sku":"30200048-4MR3","price":10.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":51255729979712,"sku":"30200049-4CRYSTAL","price":19.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":51247210004800,"sku":"30200049-4ARMOR","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Arm_Torso.png?v=1762292941"},{"product_id":"iron-wolf-torso-extender","title":"Iron Wolf- Torso Extender","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eTorso Extender\u003cbr\u003e\u003c\/strong\u003eThis accessory component is compatible with all Questoris and Dominus class Knights.\u003cbr\u003eThis part does not replace any existing component, but rather is sandwiched between the legs and torso of the model to make it taller.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching Instructions\u003c\/strong\u003e\u003cbr\u003e1) Glue the combined torso extender to the top of the ball located on top of the model's legs.\u003cbr\u003e2) You can glue a magnet of up to 5mm in diameter into the hole on the top of the extender in order to magnetize the legs to the bottom of the main body.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese parts have been designed by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e, and have been licensed for a limited time, to Pop Goes the Monkey.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":51247216197952,"sku":"30200046-4MR3","price":15.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":51255696392512,"sku":"30200047-4CRYSTAL","price":28.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Quest_Torso.png?v=1762293212"},{"product_id":"iron-wolf-armored-torso-extender","title":"Iron Wolf - Armored Torso Extender","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eArmored Torso Extender \u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003eThis accessory component is compatible with all Questoris and Dominus class Knights.\u003cbr\u003eThis part does not replace any existing component, but rather is sandwiched between the legs and torso of the model to make it taller.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttaching Instructions\u003c\/strong\u003e\u003cbr\u003e1) Glue the combined torso extender to the top of the ball located on top of the model's legs.\u003cbr\u003e2) You can glue a magnet of up to 5mm in diameter into the hole on the top of the extender in order to magnetize the legs to the bottom of the main body.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese parts have been designed by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIron Wolf Minis\u003c\/strong\u003e, and have been licensed for a limited time, to Pop Goes the Monkey.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003cbr\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":51247241789760,"sku":"30200044-4MR3","price":15.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":51247241822528,"sku":"30200045-4CRYSTAL","price":28.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/Quest_Torso_armored.png?v=1762293287"}],"url":"https:\/\/popgoesthemonkey.com\/en-jp\/collections\/iron-wolf-minis\/walkers_knight-dominus.oembed","provider":"Pop Goes the Monkey","version":"1.0","type":"link"}