{"title":"Walking Vehicle Weapons","description":"\u003cstrong\u003eHaving trouble finding what you're looking for?\u003c\/strong\u003e For the best sorting results, use the filters labeled \u003cspan style=\"color: #ff2a00;\"\u003e\u003cem\u003e\"Walkers\"\u003c\/em\u003e\u003c\/span\u003e or \u003cspan style=\"color: #ff2a00;\"\u003e\u003cem\u003e\"Weapon Types\"\u003c\/em\u003e\u003c\/span\u003e to make it easier for you to find exactly what you are looking for. You can also simply use the search field above to type in the exactly what you need.","products":[{"product_id":"3x-prime-agressor-gat-barrels","title":"3x Prime Agressor : Gat Barrels","description":"These custom designed weapons are sold unpainted and meant to replace the standard issued weapons created to fit on the new Agressor models in order to enhance and personalize them. \u003cstrong\u003eEach gun section is roughtly 5mm around and 10.5 mm long.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/strong\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395337625920,"sku":"8003328-4CRYSTAL","price":13.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395337658688,"sku":"8003328-4ARMOR","price":14.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_40343413_13432709_1693251129_1_0.jpg?v=1693464589"},{"product_id":"base-mortis-dread-gatcannon-left","title":"Base - Mortis Dread: GatCannon (Left)","description":"\u003cp\u003eThis weapon arm is designed to fit the classic Mortis Dread model. Simply wash with warm soapy water and use super glue to attach to your model.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50314539860288,"sku":"20000328-4MR3","price":17.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395274809664,"sku":"10549319-4CRYSTAL","price":23.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395274842432,"sku":"10549319-4ARMOR","price":25.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_31531179_16699216_1692639686_1_0.jpg?v=1693458887"},{"product_id":"base-mortis-dread-plazcannon-left","title":"Base - Mortis Dread: PlazCannon (Left)","description":"\u003cp\u003eThis weapon arm is designed to fit the classic Mortis Dread model. Simply wash with warm soapy water and use super glue to attach to your model.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50314520625472,"sku":"20000326-4MR3","price":17.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395274678592,"sku":"10549320-4CRYSTAL","price":28.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395274711360,"sku":"10549320-4ARMOR","price":31.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_31531255_16699302_1692639731_1_0.jpg?v=1693458880"},{"product_id":"base-mortis-dread-meltercannon-left","title":"Base - Mortis Dread: MelterCannon (Left)","description":"\u003cp\u003eThis weapon arm is designed to fit the classic Mortis Dread model. Simply wash with warm soapy water and use super glue to attach to your model.*\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eMonkey Resin 3 \u003c\/strong\u003eis a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50314504143168,"sku":"20000324-4MR3","price":17.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395274613056,"sku":"10549322-4CRYSTAL","price":22.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395274645824,"sku":"10549322-4ARMOR","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_31531341_16699362_1692639759_1_0.jpg?v=1693458873"},{"product_id":"base-mortis-dread-volkcannon-left","title":"Base - Mortis Dread: VolkCannon (Left)","description":"\u003cp\u003eThis weapon arm is designed to fit the classic Mortis Dread model. Simply wash with warm soapy water and use super glue to attach to your model.*\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50314489004352,"sku":"20000323-4MR3","price":17.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395274449216,"sku":"10549324-4CRYSTAL","price":23.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395274481984,"sku":"10549324-4ARMOR","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_31550229_16699378_1692639788_1_0.jpg?v=1693458865"},{"product_id":"base-mortis-dread-gatcannon-right","title":"Base - Mortis Dread: GatCannon (Right)","description":"\u003cp\u003eThis weapon arm is designed to fit the classic Mortis Dread model. Simply wash with warm soapy water and use super glue to attach to your model.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50314548740416,"sku":"20000329-4MR3","price":17.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395274383680,"sku":"10549325-4CRYSTAL","price":23.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395274416448,"sku":"10549325-4ARMOR","price":25.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_31531426_16699393_1692639846_1_0.jpg?v=1693458855"},{"product_id":"base-mortis-dread-plazcannon-right","title":"Base - Mortis Dread: PlazCannon (Right)","description":"\u003cp\u003eThis weapon arm is designed to fit the classic Mortis Dread model. Simply wash with warm soapy water and use super glue to attach to your model.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50314527408448,"sku":"20000327-4MR3","price":17.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395274219840,"sku":"10549326-4CRYSTAL","price":28.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395274252608,"sku":"10549326-4ARMOR","price":31.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_31531481_16699411_1692639873_1_0.jpg?v=1693458843"},{"product_id":"base-mortis-dread-meltercannon-right","title":"Base - Mortis Dread: MelterCannon (Right)","description":"\u003cp\u003eThis weapon arm is designed to fit the classic Mortis Dread model. Simply wash with warm soapy water and use super glue to attach to your model.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50314515382592,"sku":"20000325-4MR3","price":17.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395274088768,"sku":"10549328-4CRYSTAL","price":22.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395274121536,"sku":"10549328-4ARMOR","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_31531550_16699446_1692639901_1_0.jpg?v=1693458834"},{"product_id":"base-mortis-dread-volkcannon-right","title":"Base - Mortis Dread: VolkCannon (Right)","description":"\u003cp\u003eThis weapon arm is designed to fit the classic Mortis Dread model. Simply wash with warm soapy water and use super glue to attach to your model.*\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50314485629248,"sku":"20000322-4MR","price":17.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395273957696,"sku":"10549329-4CRYSTAL","price":23.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395273990464,"sku":"10549329-4ARMOR","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_31531592_16699453_1692639932_1_0.jpg?v=1693458826"},{"product_id":"5x-xxl-energy-spear-lagavullun-76mm","title":"5x XXL Energy Spear: Lagavullun 76mm","description":"These weapons Do NOT incorporate hands. They are sold unpainted, with raised emblem and detail on them that makes painting easy and ensures a consistent, uniform appearance to your entire army. These should fit both the new and classic 28mm scale, space marine or chaos marine models.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395262652736,"sku":"10614027-4CRYSTAL","price":17.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395262685504,"sku":"10614027-4ARMOR","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_31710111_16788337_1686938488_1_0_f2f3312a-4c1e-464f-b4bf-3d7446e73851.jpg?v=1693457822"},{"product_id":"base-mortis-dread-heavy-bolters-left","title":"Base - Mortis Dread: Heavy Bolters (Left)","description":"\u003cp\u003eThis weapon arm is designed to fit the classic Mortis Dread model. Simply wash with warm soapy water and use super glue to attach to your model.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50314481107264,"sku":"20000321-4MR3","price":17.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395192594752,"sku":"10906985-4CRYSTAL","price":29.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395192627520,"sku":"10906985-4ARMOR","price":33.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_32482384_17191142_1692639818_1_0.jpg?v=1693454272"},{"product_id":"base-mortis-dread-heavy-bolters-right","title":"Base - Mortis Dread: Heavy Bolters (Right)","description":"\u003cp\u003eThis weapon arm is designed to fit the classic Mortis Dread model. Simply wash with warm soapy water and use super glue to attach to your model.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50314472292672,"sku":"20000320-4MR3","price":17.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395192529216,"sku":"10906987-4CRYSTAL","price":29.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395192561984,"sku":"10906987-4ARMOR","price":33.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_32482412_17191182_1692639963_1_0.jpg?v=1693454263"},{"product_id":"arch-battleknight-deamon-cleaver-left","title":"Arch Battleknight: Deamon Cleaver (Left)","description":"\u003cp\u003eThis weapon is designed as part of a Full Arch Battleknight Automaton build. \u003cstrong\u003eIt is not a full model.\u003c\/strong\u003e The weapon is scaled to work with a standard GW Nemesis Dreadknight or similar model kits, for a conversion project of your own.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003eThese parts are Licensed, for a limited time, to Pop Goes the Monkey from the digital artist, Antonis Bouras. If you would like to purchase his .stl files to print on your own 3D printer go to his \u003ca href=\"https:\/\/www.artstation.com\/marketplace\/p\/gBDL\/deamonslayer-knight-multipart-kit-for-3d-print?utm_source=artstation\u0026amp;utm_medium=referral\u0026amp;utm_campaign=homepage\u0026amp;utm_term=marketplace\" rel=\"nofollow\"\u003eArtstation Store (LINKED HERE) \u003c\/a\u003eto buy it directly from him. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"TufFlex MJP","offer_id":49395186958656,"sku":"11005040-4ARMOR","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_32748946_17324522_1686938511_1_0_314e509a-5574-4659-821a-e78d451dabc5.jpg?v=1693453653"},{"product_id":"arch-battleknight-deamon-cleaver-right","title":"Arch Battleknight: Deamon Cleaver (Right)","description":"This weapon is designed as part of a Full Arch Battleknight Automaton build.\u003cstrong\u003e It is not a full model.\u003c\/strong\u003e The weapon is scaled to work with a standard GW Nemesis Dreadknight or similar model kits, for a conversion project of your own.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNOTE:\u003c\/strong\u003e These parts are Licensed, for a limited time, to Pop Goes the Monkey from the digital artist, Antonis Bouras. If you would like to purchase his .stl files to print on your own 3D printer go to his \u003ca href=\"https:\/\/www.artstation.com\/marketplace\/p\/gBDL\/deamonslayer-knight-multipart-kit-for-3d-print?utm_source=artstation\u0026amp;utm_medium=referral\u0026amp;utm_campaign=homepage\u0026amp;utm_term=marketplace\" rel=\"nofollow\"\u003eArtstation Store (LINKED HERE)\u003c\/a\u003e to buy it directly from him. \u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"TufFlex MJP","offer_id":49395186893120,"sku":"11005041-4ARMOR","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_32749739_17325402_1686938511_1_0_cb0af367-39e6-4561-bfd9-bb68ca9cc8b7.jpg?v=1693453640"},{"product_id":"arch-battleknight-deamon-mauler-left","title":"Arch Battleknight: Deamon Mauler (Left)","description":"This weapon is designed as part of a Full Arch Battleknight Automaton build. \u003cstrong\u003eIt is not a full model. \u003c\/strong\u003eThe weapon is scaled to work with a standard GW Nemesis Dreadknight or similar model kits, for a conversion project of your own.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNOTE: \u003c\/strong\u003eThese parts are Licensed, for a limited time, to Pop Goes the Monkey from the digital artist, Antonis Bouras. If you would like to purchase his .stl files to print on your own 3D printer go to his \u003ca href=\"https:\/\/www.artstation.com\/marketplace\/p\/gBDL\/deamonslayer-knight-multipart-kit-for-3d-print?utm_source=artstation\u0026amp;utm_medium=referral\u0026amp;utm_campaign=homepage\u0026amp;utm_term=marketplace\" rel=\"nofollow\"\u003eArtstation Store (LINKED HERE) \u003c\/a\u003e to buy it directly from him. \u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395186794816,"sku":"11005043-4CRYSTAL","price":18.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395186827584,"sku":"11005043-4ARMOR","price":18.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_32750006_17325435_1686938512_1_0_049bfa0f-2e84-4f4f-afa6-50d83e6fd3c4.jpg?v=1693453628"},{"product_id":"arch-battleknight-deamon-mauler-right","title":"Arch Battleknight: Deamon Mauler (Right)","description":"This weapon is designed as part of a Full Arch Battleknight Automaton build. \u003cstrong\u003eIt is not a full model.\u003c\/strong\u003e The weapon is scaled to work with a standard GW Nemesis Dreadknight or similar model kits, for a conversion project of your own.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNOTE: \u003c\/strong\u003eThese parts are Licensed, for a limited time, to Pop Goes the Monkey from the digital artist, Antonis Bouras. If you would like to purchase his .stl files to print on your own 3D printer go to his \u003ca href=\"https:\/\/www.artstation.com\/marketplace\/p\/gBDL\/deamonslayer-knight-multipart-kit-for-3d-print?utm_source=artstation\u0026amp;utm_medium=referral\u0026amp;utm_campaign=homepage\u0026amp;utm_term=marketplace\" rel=\"nofollow\"\u003eArtstation Store (LINKED HERE) \u003c\/a\u003eto buy it directly from him. \u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395186729280,"sku":"11005044-4CRYSTAL","price":18.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395186762048,"sku":"11005044-4ARMOR","price":18.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_32750046_17325564_1686938512_1_0_347be824-b0d6-4654-bfea-a575cae8d877.jpg?v=1693453616"},{"product_id":"arch-battleknight-deamon-crusher-left","title":"Arch Battleknight: Deamon Crusher (Left)","description":"This weapon is designed as part of a Full Arch Battleknight Automaton build. \u003cstrong\u003eIt is not a full model.\u003c\/strong\u003e The weapon is scaled to work with a standard GW Nemesis Dreadknight or similar model kits, for a conversion project of your own.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNOTE:\u003c\/strong\u003e These parts are Licensed, for a limited time, to Pop Goes the Monkey from the digital artist, Antonis Bouras. If you would like to purchase his .stl files to print on your own 3D printer go to his \u003ca href=\"https:\/\/www.artstation.com\/marketplace\/p\/gBDL\/deamonslayer-knight-multipart-kit-for-3d-print?utm_source=artstation\u0026amp;utm_medium=referral\u0026amp;utm_campaign=homepage\u0026amp;utm_term=marketplace\" rel=\"nofollow\"\u003eArtstation Store (LINKED HERE)\u003c\/a\u003e to buy it directly from him. \u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395186630976,"sku":"11005045-4CRYSTAL","price":19.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395186663744,"sku":"11005045-4ARMOR","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_32750100_17325600_1686938512_1_0_6b21199c-3467-407a-93b5-f4b8c71cd161.jpg?v=1693453604"},{"product_id":"arch-battleknight-deamon-crusher-right","title":"Arch Battleknight: Deamon Crusher (Right)","description":"This weapon is designed as part of a Full Arch Battleknight Automaton build.\u003cstrong\u003e It is not a full model.\u003c\/strong\u003e The weapon is scaled to work with a standard GW Nemesis Dreadknight or similar model kits, for a conversion project of your own.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNOTE:\u003c\/strong\u003e These parts are Licensed, for a limited time, to Pop Goes the Monkey from the digital artist, Antonis Bouras. If you would like to purchase his .stl files to print on your own 3D printer go to his \u003ca href=\"https:\/\/www.artstation.com\/marketplace\/p\/gBDL\/deamonslayer-knight-multipart-kit-for-3d-print?utm_source=artstation\u0026amp;utm_medium=referral\u0026amp;utm_campaign=homepage\u0026amp;utm_term=marketplace\" rel=\"nofollow\"\u003eArtstation Store (LINKED HERE)\u003c\/a\u003e to buy it directly from him. \u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395186565440,"sku":"11005046-4CRYSTAL","price":19.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395186598208,"sku":"11005046-4ARMOR","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_32750129_17325628_1686938512_1_0_245ae051-5183-416b-a3e9-e211ccaf6ca5.jpg?v=1693453592"},{"product_id":"arch-battleknight-deamon-glaive-left","title":"Arch Battleknight: Deamon Glaive (Left)","description":"This weapon is designed as part of a Full Arch Battleknight Automaton build. \u003cstrong\u003eIt is not a full model.\u003c\/strong\u003e The weapon is scaled to work with a standard GW Nemesis Dreadknight or similar model kits, for a conversion project of your own.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNOTE:\u003c\/strong\u003e These parts are Licensed, for a limited time, to Pop Goes the Monkey from the digital artist, Antonis Bouras. If you would like to purchase his .stl files to print on your own 3D printer go to his \u003ca href=\"https:\/\/www.artstation.com\/marketplace\/p\/gBDL\/deamonslayer-knight-multipart-kit-for-3d-print?utm_source=artstation\u0026amp;utm_medium=referral\u0026amp;utm_campaign=homepage\u0026amp;utm_term=marketplace\" rel=\"nofollow\"\u003eArtstation Store (LINKED HERE)\u003c\/a\u003e to buy it directly from him. \u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395186499904,"sku":"11005048-4CRYSTAL","price":18.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395186532672,"sku":"11005048-4ARMOR","price":19.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_32750826_17325767_1686938512_1_0_fff84e99-a95d-462b-b46c-761757a2dac1.jpg?v=1693453579"},{"product_id":"arch-battleknight-deamon-glaive-right","title":"Arch Battleknight: Deamon Glaive (Right)","description":"This weapon is designed as part of a Full Arch Battleknight Automaton build. \u003cstrong\u003eIt is not a full model.\u003c\/strong\u003e The weapon is scaled to work with a standard GW Nemesis Dreadknight or similar model kits, for a conversion project of your own.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNOTE:\u003c\/strong\u003e These parts are Licensed, for a limited time, to Pop Goes the Monkey from the digital artist, Antonis Bouras. If you would like to purchase his .stl files to print on your own 3D printer go to his \u003ca href=\"https:\/\/www.artstation.com\/marketplace\/p\/gBDL\/deamonslayer-knight-multipart-kit-for-3d-print?utm_source=artstation\u0026amp;utm_medium=referral\u0026amp;utm_campaign=homepage\u0026amp;utm_term=marketplace\" rel=\"nofollow\"\u003eArtstation Store (LINKED HERE)\u003c\/a\u003e to buy it directly from him. \u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395186434368,"sku":"11005049-4CRYSTAL","price":18.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395186467136,"sku":"11005049-4ARMOR","price":19.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_32750943_17325920_1686938512_1_0_d5c94f31-77ba-4016-b707-217ebf7d7980.jpg?v=1693453567"},{"product_id":"arch-battleknight-deamon-impaler-left","title":"Arch Battleknight: Deamon Impaler (Left)","description":"This weapon is designed as part of a Full Arch Battleknight Automaton build. \u003cstrong\u003eIt is not a full model.\u003c\/strong\u003e The weapon is scaled to work with a standard GW Nemesis Dreadknight or similar model kits, for a conversion project of your own.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNOTE:\u003c\/strong\u003e These parts are Licensed, for a limited time, to Pop Goes the Monkey from the digital artist, Antonis Bouras. If you would like to purchase his .stl files to print on your own 3D printer go to his \u003ca href=\"https:\/\/www.artstation.com\/marketplace\/p\/gBDL\/deamonslayer-knight-multipart-kit-for-3d-print?utm_source=artstation\u0026amp;utm_medium=referral\u0026amp;utm_campaign=homepage\u0026amp;utm_term=marketplace\" rel=\"nofollow\"\u003eArtstation Store (LINKED HERE) \u003c\/a\u003eto buy it directly from him. \u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395186204992,"sku":"11005050-4CRYSTAL","price":18.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395186237760,"sku":"11005050-4ARMOR","price":19.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_32751144_17326022_1686938512_1_0_6aa2b585-58a3-4194-b5bb-eb7dc5414bad.jpg?v=1693453554"},{"product_id":"arch-battleknight-deamon-impaler-right","title":"Arch Battleknight: Deamon Impaler (Right)","description":"This weapon is designed as part of a Full Arch Battleknight Automaton build. \u003cstrong\u003eIt is not a full model.\u003c\/strong\u003e The weapon is scaled to work with a standard GW Nemesis Dreadknight or similar model kits, for a conversion project of your own.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNOTE: \u003c\/strong\u003eThese parts are Licensed, for a limited time, to Pop Goes the Monkey from the digital artist, Antonis Bouras. If you would like to purchase his .stl files to print on your own 3D printer go to his \u003ca href=\"https:\/\/www.artstation.com\/marketplace\/p\/gBDL\/deamonslayer-knight-multipart-kit-for-3d-print?utm_source=artstation\u0026amp;utm_medium=referral\u0026amp;utm_campaign=homepage\u0026amp;utm_term=marketplace\" rel=\"nofollow\"\u003eArtstation Store (LINKED HERE)\u003c\/a\u003e  to buy it directly from him. \u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395186139456,"sku":"11005051-4CRYSTAL","price":18.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395186172224,"sku":"11005051-4ARMOR","price":19.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_32751318_17326060_1686938512_1_0_1ab3e845-bb45-45ce-a3d1-2492f61aaedd.jpg?v=1693453546"},{"product_id":"arch-battleknight-deamon-slayer-left","title":"Arch Battleknight: Deamon Slayer (Left)","description":"\u003cp\u003eThis weapon is designed as part of a Full Arch Battleknight Automaton build. \u003cstrong\u003eIt is not a full model.\u003c\/strong\u003e The weapon is scaled to work with a standard GW Nemesis Dreadknight or similar model kits, for a conversion project of your own.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003eThese parts are Licensed, for a limited time, to Pop Goes the Monkey from the digital artist, Antonis Bouras. If you would like to purchase his .stl files to print on your own 3D printer go to his \u003ca href=\"https:\/\/www.artstation.com\/marketplace\/p\/gBDL\/deamonslayer-knight-multipart-kit-for-3d-print?utm_source=artstation\u0026amp;utm_medium=referral\u0026amp;utm_campaign=homepage\u0026amp;utm_term=marketplace\" rel=\"nofollow\"\u003eArtstation Store (LINKED HERE)\u003c\/a\u003e to buy it directly from him. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"TufFlex MJP","offer_id":49395186106688,"sku":"11005058-4ARMOR","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_32751382_17326130_1686938512_1_0_b740bea6-3ea9-4267-814b-c07404579b99.jpg?v=1693453536"},{"product_id":"arch-battleknight-deamon-slayer-right","title":"Arch Battleknight: Deamon Slayer (Right)","description":"\u003cp\u003eThis weapon is designed as part of a Full Arch Battleknight Automaton build. \u003cstrong\u003eIt is not a full model.\u003c\/strong\u003e The weapon is scaled to work with a standard GW Nemesis Dreadknight or similar model kits, for a conversion project of your own.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e These parts are Licensed, for a limited time, to Pop Goes the Monkey from the digital artist, Antonis Bouras. If you would like to purchase his .stl files to print on your own 3D printer go to his \u003ca href=\"https:\/\/www.artstation.com\/marketplace\/p\/gBDL\/deamonslayer-knight-multipart-kit-for-3d-print?utm_source=artstation\u0026amp;utm_medium=referral\u0026amp;utm_campaign=homepage\u0026amp;utm_term=marketplace\" rel=\"nofollow\"\u003eArtstation Store (LINKED HERE)\u003c\/a\u003e to buy it directly from him. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"TufFlex MJP","offer_id":49395185811776,"sku":"11005059-4ARMOR","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_32751412_17326153_1686938512_1_0_775b2bb1-bf88-4066-b7a6-2f1bef7c4781.jpg?v=1693453526"},{"product_id":"arch-battleknight-hurricane-cannon","title":"Arch Battleknight: Hurricane Cannon","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThis weapon is designed as part of a Full Arch Battleknight, \u003cstrong\u003eit is not a full model.\u003c\/strong\u003e The weapon is scaled to work with a standard GW Nemesis Dreadknight or similar model kits, for a conversion project of your own.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e These parts are Licensed, for a limited time, to Pop Goes the Monkey from the digital artist, Antonis Bouras. If you would like to purchase his .stl files to print on your own 3D printer go to his \u003ca href=\"https:\/\/www.artstation.com\/marketplace\/p\/gBDL\/deamonslayer-knight-multipart-kit-for-3d-print?utm_source=artstation\u0026amp;utm_medium=referral\u0026amp;utm_campaign=homepage\u0026amp;utm_term=marketplace\" rel=\"nofollow\"\u003eArtstation Store (LINKED HERE)\u003c\/a\u003e to buy it directly from him. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"TufFlex MJP","offer_id":49395185418560,"sku":"11005047-4ARMOR","price":18.75,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3","offer_id":49991102759232,"sku":"11005047-4MR","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_32751799_17326290_1686938512_1_0_fc39b670-9de8-4c96-8649-03cb11462c98.jpg?v=1693453515"},{"product_id":"arch-battleknight-inferno-flamer","title":"Arch Battleknight: Inferno Flamer","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThis weapon is designed as part of a Full Arch Battleknight, \u003cstrong\u003eit is not a full model.\u003c\/strong\u003e The weapon is scaled to work with a standard GW Nemesis Dreadknight or similar model kits, for a conversion project of your own.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003eThese parts are Licensed, for a limited time, to Pop Goes the Monkey from the digital artist, Antonis Bouras. If you would like to purchase his .stl files to print on your own 3D printer go to his \u003ca href=\"https:\/\/www.artstation.com\/marketplace\/p\/gBDL\/deamonslayer-knight-multipart-kit-for-3d-print?utm_source=artstation\u0026amp;utm_medium=referral\u0026amp;utm_campaign=homepage\u0026amp;utm_term=marketplace\" rel=\"nofollow\"\u003eArtstation Store (LINKED HERE)\u003c\/a\u003e to buy it directly from him. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"TufFlex MJP","offer_id":49395185353024,"sku":"11005054-4ARMOR","price":18.0,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3","offer_id":49991067500864,"sku":"11005054-4MR","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_32751812_17326302_1686938512_1_0_e331734d-e064-4b7d-8a56-c8a5dcbb9317.jpg?v=1693453504"},{"product_id":"arch-battleknight-psycho-cannon","title":"Arch Battleknight: Psycho Cannon","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThis weapon is designed as part of a Full Arch Battleknight, \u003cstrong\u003eit is not a full model.\u003c\/strong\u003e The weapon is scaled to work with a standard GW Nemesis Dreadknight or similar model kits, for a conversion project of your own.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003eThese parts are Licensed, for a limited time, to Pop Goes the Monkey from the digital artist, Antonis Bouras. If you would like to purchase his .stl files to print on your own 3D printer go to his \u003ca rel=\"nofollow\" href=\"https:\/\/www.artstation.com\/marketplace\/p\/gBDL\/deamonslayer-knight-multipart-kit-for-3d-print?utm_source=artstation\u0026amp;utm_medium=referral\u0026amp;utm_campaign=homepage\u0026amp;utm_term=marketplace\"\u003eArtstation Store (LINKED HERE)\u003c\/a\u003e to buy it directly from him. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"TufFlex MJP","offer_id":49395185287488,"sku":"11005055-4ARMOR","price":18.25,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3","offer_id":49991091159360,"sku":"11005055-4MR","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_32751908_17326320_1686938512_1_0_1f18645e-285a-4187-94b6-9a7a9ce531f5.jpg?v=1693453494"},{"product_id":"arch-battleknight-tempest-shield-w-hands","title":"Arch Battleknight: Tempest Shield w\/Hands","description":"This weapon is designed as part of a Full Arch Battleknight Automaton build.\u003cstrong\u003e It is not a full model.\u003c\/strong\u003e The weapon is scaled to work with a standard GW Nemesis Dreadknight or similar model kits, for a conversion project of your own.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNOTE:\u003c\/strong\u003e These parts are Licensed, for a limited time, to Pop Goes the Monkey from the digital artist, Antonis Bouras. If you would like to purchase his .stl files to print on your own 3D printer go to his \u003ca href=\"https:\/\/www.artstation.com\/marketplace\/p\/gBDL\/deamonslayer-knight-multipart-kit-for-3d-print?utm_source=artstation\u0026amp;utm_medium=referral\u0026amp;utm_campaign=homepage\u0026amp;utm_term=marketplace\" rel=\"nofollow\"\u003eArtstation Store (LINKED HERE)\u003c\/a\u003e to buy it directly from him. \u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49395185189184,"sku":"11005061-4CRYSTAL","price":28.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395185221952,"sku":"11005061-4ARMOR","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_32751937_17326365_1686938512_1_0_aef1bd8d-1ae6-48f0-86d1-f7e3afec260a.jpg?v=1693453484"},{"product_id":"brs-21-big-shooter","title":"BRS-21 : Big Shooter","description":"\u003cp\u003e\u003cstrong\u003e“So ya want'ed dem wepinz from dat Big Rona Kit? Well I Nicked it for ya” \u003c\/strong\u003e—Loota Polooza\u003cbr\u003e\u003cbr\u003eThese bits a meant to add just the right Orc’ey feel to any Model, Vehicle or Scenery. The weapon is roughly 58 mm long, 18 mm wide and 20 mm tall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3 \/ 1 Gun","offer_id":50457362661696,"sku":"20000823-4MR3","price":10.5,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3 \/ 3 Guns","offer_id":50457362694464,"sku":"20000824-4MR3","price":17.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 1 Gun","offer_id":49395113165120,"sku":"11689700-4CRYSTAL","price":19.25,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 3 Guns","offer_id":49395113197888,"sku":"11689696-4CRYSTAL","price":42.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 1 Gun","offer_id":49395113230656,"sku":"11689700-4ARMOR","price":20.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 3 Guns","offer_id":49395113263424,"sku":"11689696-4ARMOR","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_34824530_18271968_1686938558_1_0.jpg?v=1693445327"},{"product_id":"brs-21-junk-zooka","title":"BRS-21 : Junk'zooka","description":"\u003cp\u003e\u003cstrong\u003e“So ya want'ed dem wepinz from dat Big Rona Kit? …Well I Nicked it for ya”\u003c\/strong\u003e —Loota Polooza\u003cbr\u003e\u003cbr\u003eThese bits a meant to add just the right Orc’ey feel to any Model, Vehicle or Scenery. The weapon is roughly 43 mm long, 12 mm wide and 32 mm tall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3 \/ 1 Launcher","offer_id":50457246138688,"sku":"20000819-4MR3","price":13.0,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3 \/ 3 Launchers","offer_id":50457246171456,"sku":"20000820-4MR3","price":20.0,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 1 Launcher","offer_id":49395112968512,"sku":"11689823-4CRYSTAL","price":21.75,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 3 Launchers","offer_id":49395113001280,"sku":"11689702-4CRYSTAL","price":46.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 1 Launcher","offer_id":49395113034048,"sku":"11689823-4ARMOR","price":23.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 3 Launchers","offer_id":49395113066816,"sku":"11689702-4ARMOR","price":54.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_34824615_18272145_1686938558_1_0_729d8608-9804-4f55-ad7a-b6255dd78654.jpg?v=1693445307"},{"product_id":"brs-21-rokkitz","title":"BRS-21 : Rokkitz","description":"\u003cp\u003e\u003cstrong\u003e“So ya want'ed dem wepinz from dat Big Rona Kit? …Well I Nicked it for ya”\u003c\/strong\u003e —Loota Polooza\u003cbr\u003e\u003cbr\u003eThese bits a meant to add just the right Orc’ey feel to any Model, Vehicle or Scenery. The weapon is roughly 43 mm long, 30 mm wide and 28 mm tall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3 \/ 1 Launcher","offer_id":50457167069504,"sku":"20000817-4MR3","price":12.5,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3 \/ 3 Launchers","offer_id":50457167102272,"sku":"20000818-4MR3","price":20.0,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 1 Launcher","offer_id":49395112804672,"sku":"11689854-4CRYSTAL","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 3 Launchers","offer_id":49395112870208,"sku":"11689852-4CRYSTAL","price":71.5,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 1 Launcher","offer_id":49395112902976,"sku":"11689854-4ARMOR","price":33.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 3 Launchers","offer_id":49395112935744,"sku":"11689852-4ARMOR","price":86.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_34824757_18272188_1686938558_1_0_02c6a3dd-147c-4985-9a7d-8fac5cf3f924.jpg?v=1693445287"},{"product_id":"brs-21-flame-throw-a","title":"BRS-21 : Flame Throw'a","description":"\u003cp\u003e\u003cstrong\u003e“So ya want'ed dem wepinz from dat Big Rona Kit? …Well I Nicked it for ya”\u003c\/strong\u003e —Loota Polooza\u003cbr\u003e\u003cbr\u003eThese bits a meant to add just the right Orc’ey feel to any Model, Vehicle or Scenery. The weapon is roughly 60 mm long, 18 mm wide and 23 mm tall.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3 \/ 1 Gun","offer_id":50457276023104,"sku":"20000821-4MR3","price":11.0,"currency_code":"USD","in_stock":true},{"title":"Monkey Resin 3 \/ 3 Guns","offer_id":50457276055872,"sku":"20000822-4MR3","price":19.0,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 1 Gun","offer_id":49395112673600,"sku":"11689855-4CRYSTAL","price":21.75,"currency_code":"USD","in_stock":true},{"title":"Classic MJP \/ 3 Guns","offer_id":49395112706368,"sku":"11689853-4CRYSTAL","price":44.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 1 Gun","offer_id":49395112739136,"sku":"11689855-4ARMOR","price":23.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP \/ 3 Guns","offer_id":49395112771904,"sku":"11689853-4ARMOR","price":51.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_34824804_18272283_1686938558_1_0.jpg?v=1694124966"},{"product_id":"eternus-assault-armor-gatling-cannon","title":"Eternus Assault Armor : Gatling Cannon","description":"\u003cp\u003e\u003cstrong\u003eThis weapon arm is designed to fit the underslung mount on either the Left or the Right weapon hand of the Eternus Assault Armor. \u003c\/strong\u003eThese parts are pre-drilled to accommodate magnets to make them easily interchangeable with the other parts of that kit so, your model is always equipped with the best option for each battle.*\u003cbr\u003e\u003cbr\u003eNOTE: This kit is Licensed, for a limited time, to Pop Goes the Monkey from the digital artist, \u003cstrong\u003eAntonis Bouras\u003c\/strong\u003e. If you would like to purchase this .stl file or see what he's working on next \u003ca href=\"https:\/\/linktr.ee\/antonisbouras\" rel=\"nofollow\"\u003e[click here].\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50916650189120,"sku":"20001580-4MR3","price":12.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395007979840,"sku":"12583455-4CRYSTAL","price":18.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395008012608,"sku":"12583455-4ARMOR","price":19.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_37110073_19512858_1686938611_1_0_1a5c4ab8-c449-48c1-9b79-b033f9a74a78.jpg?v=1693436013"},{"product_id":"eternus-assault-armor-heat-ray-cannon","title":"Eternus Assault Armor : Heat Ray Cannon","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eThis weapon is designed to fit the underslung mount on any Eternus Assault Armor or Eternus Weapon Arm Adapter kits.\u003c\/strong\u003e It can be mounted on either the left or right arm. It is pre-drilled with holes for magnets (1\/4\" x 1\/16\" and 1\/4\" x 1\/32\" per weapon), making them easy to interchange as needed and ensuring they sit securely in place. This system always your model to be equipped with the best options for each battle and future-proofed when rules change.*\u003cbr\u003e\u003cbr\u003eNOTE: This kit is Licensed, for a limited time, to Pop Goes the Monkey from the digital artist,\u003cstrong\u003e Antonis Bouras\u003c\/strong\u003e. If you would like to purchase this .stl file or see what he's working on next \u003cstrong\u003e\u003ca href=\"http:\/\/https:\/\/linktr.ee\/antonisbouras\" rel=\"nofollow\"\u003e[click here].\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50916649664832,"sku":"20001579-4MR3","price":13.0,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395007914304,"sku":"12583457-4CRYSTAL","price":22.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395007947072,"sku":"12583457-4ARMOR","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_37110079_19512866_1686938611_1_0_782965a5-4a55-40b9-a38e-858f1ca59b54.jpg?v=1693436002"},{"product_id":"eternus-assault-armor-laser-cannon","title":"Eternus Assault Armor : Laser Cannon","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eThis weapon is designed to fit the underslung mount on any Eternus Assault Armor or Eternus Weapon Arm Adapter kits.\u003c\/strong\u003e It can be mounted on either the left or right arm. It is pre-drilled with holes for magnets (1\/4\" x 1\/16\" and 1\/4\" x 1\/32\" per weapon), making them easy to interchange as needed and ensuring they sit securely in place. This system always your model to be equipped with the best options for each battle and future-proofed when rules change.*\u003cbr\u003e\u003cbr\u003eNOTE: This kit is Licensed, for a limited time, to Pop Goes the Monkey from the digital artist, \u003cstrong\u003eAntonis Bouras.\u003c\/strong\u003e If you would like to purchase this .stl file or see what he's working on next \u003ca href=\"http:\/\/https:\/\/linktr.ee\/antonisbouras\" rel=\"nofollow\"\u003e[click here].\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50916648419648,"sku":"20001578-4MR3","price":12.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395007816000,"sku":"12583458-4CRYSTAL","price":20.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395007848768,"sku":"12583458-4ARMOR","price":22.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_37110084_19512871_1686938611_1_0_ec71aa05-dbcd-44b7-aab4-301b6c5cba63.jpg?v=1693435991"},{"product_id":"eternus-assault-armor-plasma-cannon","title":"Eternus Assault Armor : Plasma Cannon","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eThis weapon is designed to fit the underslung mount on any Eternus Assault Armor or Eternus Weapon Arm Adapter kits.\u003c\/strong\u003e It can be mounted on either the left or right arm. It is pre-drilled with holes for magnets (1\/4\" x 1\/16\" and 1\/4\" x 1\/32\" per weapon), making them easy to interchange as needed and ensuring they sit securely in place. This system always your model to be equipped with the best options for each battle and future-proofed when rules change.*\u003cbr\u003e\u003cbr\u003eNOTE: This kit is Licensed, for a limited time, to Pop Goes the Monkey from the digital artist, \u003cstrong\u003eAntonis Bouras.\u003c\/strong\u003e If you would like to purchase this .stl file or see what he's working on next \u003ca href=\"https:\/\/linktr.ee\/antonisbouras\" rel=\"nofollow\"\u003e[click here].\u003c\/a\u003e \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50916647174464,"sku":"20001577-4MR3","price":13.0,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395007750464,"sku":"12583460-4CRYSTAL","price":19.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395007783232,"sku":"12583460-4ARMOR","price":21.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_37110099_19512875_1686938611_1_0_333f0cab-5f34-422f-b865-f7e3bca701cd.jpg?v=1693435981"},{"product_id":"eternus-assault-armor-repeating-cannon","title":"Eternus Assault Armor : Repeating Cannon","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eThis weapon is designed to fit the underslung mount on any Eternus Assault Armor or Eternus Weapon Arm Adapter kits.\u003c\/strong\u003e It can be mounted on either the left or right arm. It is pre-drilled with holes for magnets (1\/4\" x 1\/16\" and 1\/4\" x 1\/32\" per weapon), making them easy to interchange as needed and ensuring they sit securely in place. This system always your model to be equipped with the best options for each battle and future-proofed when rules change.*\u003cbr\u003e\u003cbr\u003eNOTE: This kit is Licensed, for a limited time, to Pop Goes the Monkey from the digital artist,\u003cstrong\u003e Antonis Bouras. \u003c\/strong\u003eIf you would like to purchase this .stl file or see what he's working on next \u003ca rel=\"nofollow\" href=\"http:\/\/https:\/\/linktr.ee\/antonisbouras\"\u003e[click here].\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50916645142848,"sku":"20001576-4MR3","price":13.0,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395007684928,"sku":"12583461-4CRYSTAL","price":20.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395007717696,"sku":"12583461-4ARMOR","price":21.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_37110112_19512881_1686938611_1_0_1b899b5c-676f-41ba-abe5-e5adc5138bdd.jpg?v=1693435971"},{"product_id":"eternus-assault-armor-stud-cannon","title":"Eternus Assault Armor : Stud Cannon","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eThis weapon is designed to fit the underslung mount on any Eternus Assault Armor or Eternus Weapon Arm Adapter kits.\u003c\/strong\u003e It can be mounted on either the left or right arm. It is pre-drilled with holes for magnets (1\/4\" x 1\/16\" and 1\/4\" x 1\/32\" per weapon), making them easy to interchange as needed and ensuring they sit securely in place. This system always your model to be equipped with the best options for each battle and future-proofed when rules change.*\u003cbr\u003e\u003cbr\u003eNOTE: This kit is Licensed, for a limited time, to Pop Goes the Monkey from the digital artist, \u003cstrong\u003eAntonis Bouras.\u003c\/strong\u003e If you would like to purchase this .stl file or see what he's working on next\u003ca href=\"https:\/\/linktr.ee\/antonisbouras\" rel=\"nofollow\"\u003e [click here].\u003c\/a\u003e \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50916644127040,"sku":"20001575-4MR3","price":12.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395007619392,"sku":"12583463-4CRYSTAL","price":20.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395007652160,"sku":"12583463-4ARMOR","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_37110131_19512894_1686938611_1_0_9d19408b-f6d0-4bf2-8658-4f0c9b72e279.jpg?v=1693435961"},{"product_id":"eternus-assault-armor-thermal-cannon","title":"Eternus Assault Armor : Thermal Cannon","description":"\u003cp\u003e\u003cstrong\u003eThis weapon is designed to fit the underslung mount on any Eternus Assault Armor or Eternus Weapon Arm Adapter kits. \u003c\/strong\u003eIt can be mounted on either the left or right arm. It is pre-drilled with holes for magnets (1\/4\" x 1\/16\" and 1\/4\" x 1\/32\" per weapon), making them easy to interchange as needed and ensuring they sit securely in place. This system always your model to be equipped with the best options for each battle and future-proofed when rules change.*\u003cbr\u003e\u003cbr\u003eNOTE: This kit is Licensed, for a limited time, to Pop Goes the Monkey from the digital artist, \u003cstrong\u003eAntonis Bouras.\u003c\/strong\u003e If you would like to purchase this .stl file or see what he's working on next \u003ca rel=\"nofollow\" href=\"https:\/\/linktr.ee\/antonisbouras\"\u003e[click here].\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50916620304704,"sku":"20001574-4MR3","price":12.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395007521088,"sku":"12583464-4CRYSTAL","price":21.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395007553856,"sku":"12583464-4ARMOR","price":23.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_37110147_19512904_1686938612_1_0_f3cd89c6-0b73-4e07-807e-e876c3cb1c8c.jpg?v=1693435950"},{"product_id":"eternus-assault-armor-beam-cannon","title":"Eternus Assault Armor : Beam Cannon","description":"\u003cp\u003e\u003cstrong\u003eThis weapon is designed to fit the underslung mount on any Eternus Assault Armor or Eternus Weapon Arm Adapter kits.\u003c\/strong\u003e It can be mounted on either the left or right arm. It is pre-drilled with holes for magnets (1\/4\" x 1\/16\" and 1\/4\" x 1\/32\" per weapon), making them easy to interchange as needed and ensuring they sit securely in place. This system always your model to be equipped with the best options for each battle and future-proofed when rules change.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e This kit is Licensed, for a limited time, to Pop Goes the Monkey from the digital artist, Antonis Bouras. If you would like to purchase this .stl file or see what he's working on next \u003ca rel=\"nofollow\" href=\"https:\/\/linktr.ee\/antonisbouras\"\u003e[click here].\u003c\/a\u003e \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50916615323968,"sku":"20001573-4MR3","price":13.0,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49395007357248,"sku":"12582921-4CRYSTAL","price":21.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49395007390016,"sku":"12582921-4ARMOR","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_37109097_19512118_1686938611_1_0_6d6bc8df-e934-42f8-8d7e-9b2623e8e512.jpg?v=1693435929"},{"product_id":"sons-of-medusa-missile-rack-carapace","title":"Sons of Medusa: Missile Rack Carapace","description":"These bits are designed to fit the Primaris Redemptor dreadnought or Invictor Tactical Warsuit model. They're meant to give your standard kit a unique look and provide raised emblems and details for easy painting. Use super glue to attach to your model.*\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e \n\u003cbr\u003e\n\u003cbr\u003e\n*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.","brand":"Pop Goes the Monkey","offers":[{"title":"Classic MJP","offer_id":49394967871808,"sku":"12782752-4CRYSTAL","price":20.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394967904576,"sku":"12782752-4ARMOR","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_37472814_19794942_1686938636_1_0_f2a7dfe3-4a6d-47e3-a424-766cc72f615f.jpg?v=1735426205"},{"product_id":"base-mortis-dread-twin-heavy-lasers-left","title":"Base - Mortis Dread: Twin Heavy Lasers (Left)","description":"\u003cp\u003eThis weapon arm is designed to fit the classic Mortis Dreadnought model. *\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50314917970240,"sku":"20000335-4MR3","price":17.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49394512953664,"sku":"13427614-4CRYSTAL","price":25.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394512986432,"sku":"13427614-4ARMOR","price":27.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_39583433_20695732_1686938665_1_0_7a2484a8-d843-402b-a97f-c8a15e09f34c.jpg?v=1735425382"},{"product_id":"base-mortis-dread-twin-heavy-lasers-right","title":"Base - Mortis Dread: Twin Heavy Lasers (Right)","description":"\u003cp\u003eThis weapon arm is designed to fit the classic Mortis Dreadnought model.*\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50314914464064,"sku":"20000334-4MR3","price":17.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49394512888128,"sku":"13427617-4CRYSTAL","price":25.0,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394512920896,"sku":"13427617-4ARMOR","price":27.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_39583454_20695745_1686938665_1_0_c0d45f10-f3f5-4b1e-a162-78dfc8ad8ca6.jpg?v=1735425380"},{"product_id":"base-mortis-dread-missile-launcher-left","title":"Base - Mortis Dread: Missile Launcher (Left)","description":"\u003cp\u003eThis weapon arm is designed to fit the classic Mortis Dreadnought model.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50314912170304,"sku":"20000333-4MR3","price":16.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49394512822592,"sku":"13427615-4CRYSTAL","price":20.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394512855360,"sku":"13427615-4ARMOR","price":22.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_39642225_20695972_1686938665_1_0_5125d732-f44b-4ddc-bccb-0e186c444581.jpg?v=1735425378"},{"product_id":"base-mortis-dread-missile-launcher-right","title":"Base - Mortis Dread: Missile Launcher (Right)","description":"\u003cp\u003eThis weapon arm is designed to fit the classic Mortis Dreadnought model.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50314909647168,"sku":"20000332-4MR","price":16.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49394512757056,"sku":"13427618-4CRYSTAL","price":20.75,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394512789824,"sku":"13427618-4ARMOR","price":22.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_39642318_20695988_1686938665_1_0_f2eeef79-3f4a-4a1e-8779-d784a601ae49.jpg?v=1735425376"},{"product_id":"left-redemptus-dread-twin-heavy-lasers","title":"Left - Redemptus Dread: Twin Heavy Lasers","description":"\u003cp\u003e\u003cstrong\u003eThese bits are designed to work with the Primaris Redemptor dreadnought, Invictor Tactical Warsuit, or similar models.\u003c\/strong\u003e They feature a glue-free, insert and swivel shoulder socket attachment like the components of the standard kit. These weapon options allow your model to be more versatile to meet your ever changing needs, as well as, gives your standard kit a unique look.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3 \u003c\/strong\u003eis a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003eA Digital File \u003c\/span\u003e\u003c\/strong\u003ecan be selected as a choice under the Materials Options dropdown. If you have your own 3D printer and the tools needed to prepare and support them, this can be a great option. Please be aware these files are unsupported and in a STL file format, which is native to most any stereolithography\/CAD software. \u003cstrong\u003eBy purchasing these digital files, you are agreeing to all of the terms and conditions listed below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLEGAL DISCLAIMER for STL PURCHASE: \u003c\/strong\u003eThe rights granted to you through the purchase of our digital assets are for non-commercial\/ PERSONAL USE ONLY. Any reproductions of these files not for your own use is prohibited. You may not lawfully copy, trade and\/or resell these digital files or resell any printed reproductions of them in any way. The STL files may not be modified or altered to bypass these rights.\u003c\/p\u003e\n\u003cp\u003eFurthermore, we are not responsible for any misprints or offer technical support to assist with your printing process. These are the same elements of the files we use for our own production process, so if we discover a defect or issue with the file itself, we will fix the file and an updated file will be sent to you automatically.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50144048841024,"sku":"13436447-4MR3","price":29.25,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49394510954816,"sku":"13436448-4CRYSTAL","price":29.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394510987584,"sku":"13436448-4ARMOR","price":33.25,"currency_code":"USD","in_stock":true},{"title":"Digital File (Personal Use Only)","offer_id":50144048873792,"sku":"Redempt-TwinHvyLasers-L13436447","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_39606101_20707151_1686938666_1_0_adfadd1e-1917-4d23-b5ce-689e179350fd.jpg?v=1735425359"},{"product_id":"right-redemptus-dread-twin-heavy-lasers","title":"Right - Redemptus Dread: Twin Heavy Lasers","description":"\u003cp\u003e\u003cstrong\u003eThese bits are designed to work with the Primaris Redemptor dreadnought, Invictor Tactical Warsuit, or similar models. \u003c\/strong\u003eThey feature a glue-free, insert and swivel shoulder socket attachment like the components of the standard kit. These weapon options allow your model to be more versatile to meet your ever changing needs, as well as, gives your standard kit a unique look.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003eA Digital File\u003c\/span\u003e\u003c\/strong\u003e can be selected as a choice under the Materials Options dropdown. If you have your own 3D printer and the tools needed to prepare and support them, this can be a great option. Please be aware these files are unsupported and in a STL file format, which is native to most any stereolithography\/CAD software. \u003cstrong\u003eBy purchasing these digital files, you are agreeing to all of the terms and conditions listed below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLEGAL DISCLAIMER for STL PURCHASE:\u003c\/strong\u003e The rights granted to you through the purchase of our digital assets are for non-commercial\/ PERSONAL USE ONLY. Any reproductions of these files not for your own use is prohibited. You may not lawfully copy, trade and\/or resell these digital files or resell any printed reproductions of them in any way. The STL files may not be modified or altered to bypass these rights.\u003c\/p\u003e\n\u003cp\u003eFurthermore, we are not responsible for any misprints or offer technical support to assist with your printing process. These are the same elements of the files we use for our own production process, so if we discover a defect or issue with the file itself, we will fix the file and an updated file will be sent to you automatically.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50144057655616,"sku":"13436459-4MR3","price":14.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49394510889280,"sku":"13436449-4CRYSTAL","price":29.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394510922048,"sku":"13436449-4ARMOR","price":33.25,"currency_code":"USD","in_stock":true},{"title":"Digital File (Personal Use Only)","offer_id":50144057688384,"sku":"Redempt-TwinHvyLasers-R13436459","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_39606121_20707330_1686938666_1_0_78ec9a8d-9719-4847-a2ac-c0e817d21085.jpg?v=1735425357"},{"product_id":"left-redemptus-dread-missile-launcher","title":"Left - Redemptus Dread: Missile Launcher","description":"\u003cp\u003e\u003cstrong\u003eThese bits are designed to work with the Primaris Redemptor dreadnought, Invictor Tactical Warsuit, or similar models.\u003c\/strong\u003e They feature a glue-free, insert and swivel shoulder socket attachment like the components of the standard kit. These weapon options allow your model to be more versatile to meet your ever changing needs, as well as, gives your standard kit a unique look.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003e\u003cstrong\u003eA Digital File\u003c\/strong\u003e\u003c\/span\u003e can be selected as a choice under the Materials Options dropdown. If you have your own 3D printer and the tools needed to prepare and support them, this can be a great option. Please be aware these files are unsupported and in a STL file format, which is native to most any stereolithography\/CAD software. \u003cstrong\u003eBy purchasing these digital files, you are agreeing to all of the terms and conditions listed below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLEGAL DISCLAIMER for STL PURCHASE:\u003c\/strong\u003e The rights granted to you through the purchase of our digital assets are for non-commercial\/ PERSONAL USE ONLY. Any reproductions of these files not for your own use is prohibited. You may not lawfully copy, trade and\/or resell these digital files or resell any printed reproductions of them in any way. The STL files may not be modified or altered to bypass these rights.\u003c\/p\u003e\n\u003cp\u003eFurthermore, we are not responsible for any misprints or offer technical support to assist with your printing process. These are the same elements of the files we use for our own production process, so if we discover a defect or issue with the file itself, we will fix the file and an updated file will be sent to you automatically.\u003cbr\u003e\u003cbr\u003eFinally and most importantly, even though this is technically a plastic resin, it will not react properly with plastic glue. \u003cem\u003eUse super glue \u003c\/em\u003eto adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50143611126080,"sku":"13436450-4MR","price":14.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49394510758208,"sku":"13436451-4CRYSTAL","price":27.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394510790976,"sku":"13436451-4ARMOR","price":31.0,"currency_code":"USD","in_stock":true},{"title":"Digital File (Personal Use Only)","offer_id":50143611158848,"sku":"Redmpt-MissileLauncher-L13436450","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_39606143_20707341_1686938666_1_0_65d5e326-b437-416b-9d0e-3601978bcf80.jpg?v=1735425355"},{"product_id":"right-redemptus-dread-missile-launcher","title":"Right - Redemptus Dread: Missile Launcher","description":"\u003cp\u003e\u003cstrong\u003eThese bits are designed to work with the Primaris Redemptor dreadnought, Invictor Tactical Warsuit, or similar models.\u003c\/strong\u003e They feature a glue-free, insert and swivel shoulder socket attachment like the components of the standard kit. These weapon options allow your model to be more versatile to meet your ever changing needs, as well as, gives your standard kit a unique look.*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic MJP\u003c\/strong\u003e is an acrylic material printed using Monkey-Jet technology, which is capable of extremely high detailed parts with a smooth finish. This technique uses wax to support the printing parts to allow for any geometry to be printed without the need of printed supports. Its color may range from amber to clear and parts can be brittle so, handle with care. This material will NOT react with Plastic Glue so, we recommend using Super Glue to adhere these parts to your models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTufFlex MJP\u003c\/strong\u003e is another Monkey-Jet material with a smooth surface and an extremely high level of detail. However, it's formulated for improved toughness and flexibility to provide a bend-but-don't-break strategy of protection for your models. Thin parts may arrive slightly warped but, can be easily re-shaped by warming them up to be bent back into shape. This can also be an added benefit if you're looking to glue a flat logo onto a curved surface. At room temperature parts will flex but, they can be brittle at much lower temperatures. Use super glue to adhere these parts to your models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003e\u003cstrong\u003eA Digital File\u003c\/strong\u003e\u003c\/span\u003e can be selected as a choice under the Materials Options dropdown. If you have your own 3D printer and the tools needed to prepare and support them, this can be a great option. Please be aware these files are unsupported and in a STL file format, which is native to most any stereolithography\/CAD software. \u003cstrong\u003eBy purchasing these digital files, you are agreeing to all of the terms and conditions listed below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLEGAL DISCLAIMER for STL PURCHASE:\u003c\/strong\u003e The rights granted to you through the purchase of our digital assets are for non-commercial\/ PERSONAL USE ONLY. Any reproductions of these files not for your own use is prohibited. You may not lawfully copy, trade and\/or resell these digital files or resell any printed reproductions of them in any way. The STL files may not be modified or altered to bypass these rights.\u003c\/p\u003e\n\u003cp\u003eFurthermore, we are not responsible for any misprints or offer technical support to assist with your printing process. These are the same elements of the files we use for our own production process, so if we discover a defect or issue with the file itself, we will fix the file and an updated file will be sent to you automatically.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":50143709888832,"sku":"13436453-4MR3","price":14.5,"currency_code":"USD","in_stock":true},{"title":"Classic MJP","offer_id":49394510659904,"sku":"13436452-4CRYSTAL","price":27.25,"currency_code":"USD","in_stock":true},{"title":"TufFlex MJP","offer_id":49394510692672,"sku":"13436452-4ARMOR","price":31.0,"currency_code":"USD","in_stock":true},{"title":"Digital File (Personal Use Only)","offer_id":50143709921600,"sku":"Redmpt-MissileLauncher-R13436453","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/products\/710x528_39606153_20707356_1686938666_1_0_6b65e9fb-4f40-4212-993e-aa51ca635b8f.jpg?v=1735425354"},{"product_id":"redemptus-dread-ballista-2-pack","title":"Redemptus Dread: Ballista Weapon Pack","description":"\u003cp\u003e\u003cstrong\u003eThis kit includes 2 Redemptus Dread Weapons:\u003c\/strong\u003e 1 Left-side Missile Launcher and 1 Right-side Twin Heavy Laser.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eThese bits are designed to work with the Primaris Redemptor dreadnought, Invictor Tactical Warsuit, or similar models.\u003c\/strong\u003e\u003cspan\u003e They feature a glue-free, insert and swivel shoulder socket attachment like the components of the standard kit. These weapon options allow your model to be more versatile to meet your ever changing needs, as well as, gives your standard kit a unique look.*\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eMonkey Resin 3\u003c\/strong\u003e is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.\u003c\/p\u003e\n\u003cp\u003eThese parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003e\u003cstrong\u003eA Digital File\u003c\/strong\u003e\u003c\/span\u003e can be selected as a choice under the Materials Options dropdown. If you have your own 3D printer and the tools needed to prepare and support them, this can be a great option. Please be aware these files are unsupported and in a STL file format, which is native to most any stereolithography\/CAD software. \u003cstrong\u003eBy purchasing these digital files, you are agreeing to all of the terms and conditions listed below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLEGAL DISCLAIMER for STL PURCHASE:\u003c\/strong\u003e The rights granted to you through the purchase of our digital assets are for non-commercial\/ PERSONAL USE ONLY. Any reproductions of these files not for your own use is prohibited. You may not lawfully copy, trade and\/or resell these digital files or resell any printed reproductions of them in any way. The STL files may not be modified or altered to bypass these rights.\u003c\/p\u003e\n\u003cp\u003eFurthermore, we are not responsible for any misprints or offer technical support to assist with your printing process. These are the same elements of the files we use for our own production process, so if we discover a defect or issue with the file itself, we will fix the file and an updated file will be sent to you automatically.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates.  This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC.  Please see our full Terms of Service for more information.\u003c\/span\u003e\u003c\/p\u003e","brand":"Pop Goes the Monkey","offers":[{"title":"Monkey Resin 3","offer_id":45043278545216,"sku":"20000091-4MR3","price":23.0,"currency_code":"USD","in_stock":true},{"title":"Digital File (Personal Use Only)","offer_id":51083171758400,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/8548\/6425\/files\/1MG-Ballista-Redem-MR3.png?v=1736531957"}],"url":"https:\/\/popgoesthemonkey.com\/en-jp\/collections\/walking-vehicle-weapons\/parts_shields.oembed","provider":"Pop Goes the Monkey","version":"1.0","type":"link"}