Skip to content
Insignias Full Models Conv.Kits Marines Head Swaps Weapons Shields Vehicle Parts Walkers Apparel

Monkey Resin 3

Monkey Resin 3 is a high-quality UV cured resin that will come attached to a support structure from the production process. The parts are however, pre-cleaned and ready for primer once removed. Use only super glue to adhere these parts to your models.

To remove the bits from their supports: submerge the whole assembly in water that is hot to the touch for 5 minutes. Use your fingernail to punch away several supports to create a starting point, and carefully peel your parts off of the remaining supports all together.

You can use a very fine-grit sandpaper if needed to smooth any surface or feature further. Always be sure to wear a mask when working around resin dust.

Twin Rapfire - R1 Hatch Turrets 3d printed
Twin Rapfire - R1 Hatch Turrets 3d printed Small = 1 Hatch Turret

Twin Rapfire - R1 Hatch Turrets

€9,95 - €36,95
€9,95 - €36,95
€9,95 - €36,95
€9,95

These Hatch Turrets are designed to fit into the hatches of a standard troop tank, or similar size personal access point. Our customers have found ...

View full details
€9,95 - €36,95
€9,95 - €36,95
€9,95 - €36,95
€9,95
Evil Rune : Mayhem Missile Launcher 3d printed
Evil Rune : Mayhem Missile Launcher 3d printed

Evil Rune : Mayhem Missile Launcher

€8,95 - €20,95
€8,95 - €20,95
€8,95 - €20,95
€8,95

The Mayhem Missle Launcher is designed to represent a Havoc launcher for the Chaos Space Marines. It will fit a standard Rhino by replacing this pi...

View full details
€8,95 - €20,95
€8,95 - €20,95
€8,95 - €20,95
€8,95
Heavy Melter - R2 Hatch Turrets 3d printed
Heavy Melter - R2 Hatch Turrets 3d printed

Heavy Melter - R2 Hatch Turrets

€12,95 - €49,95
€12,95 - €49,95
€12,95 - €49,95
€12,95

NOTE: The SIZE Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue = 1 Hatch TurretMedium sprue = 2 Hatch TurretsLarge spr...

View full details
€12,95 - €49,95
€12,95 - €49,95
€12,95 - €49,95
€12,95
Mayhem Missile Launcher : Shots Fired 3d printed

Mayhem Missile Launcher : Shots Fired

€14,95 - €19,95
€14,95 - €19,95
€14,95 - €19,95
€14,95

The Mayhem Missle Launcher is designed to represent a Havoc launcher for the Chaos Space Marines. It will fit a standard Rhino by replacing this pi...

View full details
€14,95 - €19,95
€14,95 - €19,95
€14,95 - €19,95
€14,95
Winged Claw III: Legion Deimos Round Doors 3d printed
Winged Claw III: Legion Deimos Round Doors 3d printed

Winged Claw III: Legion Deimos Round Doors

€8,95 - €25,95
€8,95 - €25,95
€8,95 - €25,95
€8,95

Legion Deimos Round Doors are customized parts that can fit on the Deimos-Pattern Rhino (DPR).* These parts are designed to replace the doors from ...

View full details
€8,95 - €25,95
€8,95 - €25,95
€8,95 - €25,95
€8,95
Meltafire - R1 Hatch Turrets 3d printed
Meltafire - R1 Hatch Turrets 3d printed Small = 1 Hatch Turret

Meltafire - R1 Hatch Turrets

€9,95 - €40,95
€9,95 - €40,95
€9,95 - €40,95
€9,95

These Hatch Turrets are designed to fit into the hatches of a standard troop tank, or similar size personal access point. Our customers have found ...

View full details
€9,95 - €40,95
€9,95 - €40,95
€9,95 - €40,95
€9,95
Mayhem Missile Launcher : Full Rack 3d printed

Mayhem Missile Launcher : Full Rack

€14,95 - €19,95
€14,95 - €19,95
€14,95 - €19,95
€14,95

The Mayhem Missile Launcher is designed to represent a Havoc launcher for the Chaos Space Marines. It will fit a standard Rhino by replacing this p...

View full details
€14,95 - €19,95
€14,95 - €19,95
€14,95 - €19,95
€14,95
World Wreckers : Legion Deimos Round Doors 3d printed
World Wreckers : Legion Deimos Round Doors 3d printed

World Wreckers : Legion Deimos Round Doors

€8,95 - €25,95
€8,95 - €25,95
€8,95 - €25,95
€8,95

Legion Deimos Round Doors are customized parts that can fit on the Deimos-Pattern Rhino (DPR).* These parts are designed to replace the doors from ...

View full details
€8,95 - €25,95
€8,95 - €25,95
€8,95 - €25,95
€8,95
Nightmare Legion : Legion Deimos Round Doors 3d printed
Nightmare Legion : Legion Deimos Round Doors 3d printed

Nightmare Legion : Legion Deimos Round Doors

€8,95 - €25,95
€8,95 - €25,95
€8,95 - €25,95
€8,95

Legion Deimos Round Doors are customized parts that can fit on the Deimos-Pattern Rhino (DPR).* These parts are designed to replace the doors from ...

View full details
€8,95 - €25,95
€8,95 - €25,95
€8,95 - €25,95
€8,95
Corrupted Mayhem Missile Launcher 3d printed
Corrupted Mayhem Missile Launcher 3d printed

Corrupted Mayhem Missile Launcher

€15,95 - €22,95
€15,95 - €22,95
€15,95 - €22,95
€15,95

The Mayhem Missle Launcher is designed to represent a Havoc launcher for the Chaos Space Marines. It will fit a standard Rhino by replacing this pi...

View full details
€15,95 - €22,95
€15,95 - €22,95
€15,95 - €22,95
€15,95
Iron Heads 2 : Legion Deimos Round Doors 3d printed
Iron Heads 2 : Legion Deimos Round Doors 3d printed

Iron Heads 2 : Legion Deimos Round Doors

€8,95 - €25,95
€8,95 - €25,95
€8,95 - €25,95
€8,95

Legion Deimos Round Doors are customized parts that can fit on the Deimos-Pattern Rhino (DPR).* These parts are designed to replace the doors from ...

View full details
€8,95 - €25,95
€8,95 - €25,95
€8,95 - €25,95
€8,95
Heavy Combo 4 Pack - R2 Hatch Turrets 3d printed
Heavy Combo 4 Pack - R2 Hatch Turrets 3d printed

Heavy Combo 4 Pack - R2 Hatch Turrets

€27,95 - €51,95
€27,95 - €51,95
€27,95 - €51,95
€27,95

This Combo Pack inclides 1  each of the following: Bolt Cannon, Heavy Melter, Heavy Scorcher, and Heavy Slugger  - R2 Hatch TurretsThese Hatch Turr...

View full details
€27,95 - €51,95
€27,95 - €51,95
€27,95 - €51,95
€27,95
Kings Fist : Legion Deimos Round Doors 3d printed
Kings Fist : Legion Deimos Round Doors 3d printed

Kings Fist : Legion Deimos Round Doors

€8,95 - €25,95
€8,95 - €25,95
€8,95 - €25,95
€8,95

Legion Deimos Round Doors are customized parts that can fit on the Deimos-Pattern Rhino (DPR).* These parts are designed to replace the doors from ...

View full details
€8,95 - €25,95
€8,95 - €25,95
€8,95 - €25,95
€8,95
Bolt Cannon - R2 Hatch Turrets 3d printed
Bolt Cannon - R2 Hatch Turrets 3d printed

Bolt Cannon - R2 Hatch Turrets

€11,95 - €49,95
€11,95 - €49,95
€11,95 - €49,95
€11,95

NOTE: The SIZE Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue = 1 Hatch TurretMedium sprue = 2 Hatch TurretsLarge spr...

View full details
€11,95 - €49,95
€11,95 - €49,95
€11,95 - €49,95
€11,95
Flamefire - R1 Hatch Turrets 3d printed
Flamefire - R1 Hatch Turrets 3d printed Small = 1 Hatch Turret

Flamefire - R1 Hatch Turrets

€9,95 - €39,95
€9,95 - €39,95
€9,95 - €39,95
€9,95

These Hatch Turrets are designed to fit into the hatches of a standard troop tank, or similar size personal access point. Our customers have found ...

View full details
€9,95 - €39,95
€9,95 - €39,95
€9,95 - €39,95
€9,95
Plague Sun : Legion Deimos Round Doors 3d printed
Plague Sun : Legion Deimos Round Doors 3d printed

Plague Sun : Legion Deimos Round Doors

€8,95 - €25,95
€8,95 - €25,95
€8,95 - €25,95
€8,95

Legion Deimos Round Doors are customized parts that can fit on the Deimos-Pattern Rhino (DPR).* These parts are designed to replace the doors from ...

View full details
€8,95 - €25,95
€8,95 - €25,95
€8,95 - €25,95
€8,95
Plasfire - R1 Hatch Turrets 3d printed
Plasfire - R1 Hatch Turrets 3d printed Small = 1 Hatch Turret

Plasfire - R1 Hatch Turrets

€9,95 - €39,95
€9,95 - €39,95
€9,95 - €39,95
€9,95

These Hatch Turrets are designed to fit into the hatches of a standard troop tank, or similar size personal access point. Our customers have found ...

View full details
€9,95 - €39,95
€9,95 - €39,95
€9,95 - €39,95
€9,95
4 Piece Combo - R1 Hatch Turrets 3d printed Similar Product with Vehicle Insignia on the top.
4 Piece Combo - R1 Hatch Turrets 3d printed

4 Piece Combo - R1 Hatch Turrets

€18,95 - €40,95
€18,95 - €40,95
€18,95 - €40,95
€18,95

This kit includes: 1  Twin Rapfire, 1 Flamefire, 1 Meltafire, & 1 Plasfire TurretThese Hatch Turrets are designed to fit into the hatches of a ...

View full details
€18,95 - €40,95
€18,95 - €40,95
€18,95 - €40,95
€18,95
Storm Scars : Legion Deimos Round Doors 3d printed
Storm Scars : Legion Deimos Round Doors 3d printed

Storm Scars : Legion Deimos Round Doors

€8,95 - €25,95
€8,95 - €25,95
€8,95 - €25,95
€8,95

Legion Deimos Round Doors are customized parts that can fit on the Deimos-Pattern Rhino (DPR).* These parts are designed to replace the doors from ...

View full details
€8,95 - €25,95
€8,95 - €25,95
€8,95 - €25,95
€8,95
Winged Sword: Legion Deimos Round Doors 3d printed
Winged Sword: Legion Deimos Round Doors 3d printed

Winged Sword: Legion Deimos Round Doors

€8,95 - €25,95
€8,95 - €25,95
€8,95 - €25,95
€8,95

Legion Deimos Round Doors are customized parts that can fit on the Deimos-Pattern Rhino (DPR).* These parts are designed to replace the doors from ...

View full details
€8,95 - €25,95
€8,95 - €25,95
€8,95 - €25,95
€8,95
Book of Demons : Legion Deimos Round Doors 3d printed
Book of Demons : Legion Deimos Round Doors 3d printed

Book of Demons : Legion Deimos Round Doors

€8,95 - €25,95
€8,95 - €25,95
€8,95 - €25,95
€8,95

Legion Deimos Round Doors are customized parts that can fit on the Deimos-Pattern Rhino (DPR).* These parts are designed to replace the doors from ...

View full details
€8,95 - €25,95
€8,95 - €25,95
€8,95 - €25,95
€8,95
Hav-Launcher - R2 Hatch Turrets 3d printed
Hav-Launcher - R2 Hatch Turrets 3d printed

Hav-Launcher - R2 Hatch Turrets

€14,95 - €68,95
€14,95 - €68,95
€14,95 - €68,95
€14,95

These Hatch Turrets are designed to fit into the hatches of a standard troop tank, or similar size personal access point. Our customers have found ...

View full details
€14,95 - €68,95
€14,95 - €68,95
€14,95 - €68,95
€14,95
Heavy Scorcher - R2 Hatch Turrets 3d printed
Heavy Scorcher - R2 Hatch Turrets 3d printed

Heavy Scorcher - R2 Hatch Turrets

€12,95 - €52,95
€12,95 - €52,95
€12,95 - €52,95
€12,95

NOTE: The SIZE Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue = 1 Hatch TurretMedium sprue = 2 Hatch TurretsLarge spr...

View full details
€12,95 - €52,95
€12,95 - €52,95
€12,95 - €52,95
€12,95
WarHounds : Legion Deimos Round Doors 3d printed
WarHounds : Legion Deimos Round Doors 3d printed

Warhounds : Legion Deimos Round Doors

€8,95 - €25,95
€8,95 - €25,95
€8,95 - €25,95
€8,95

Legion Deimos Round Doors are customized parts that can fit on the Deimos-Pattern Rhino (DPR).* These parts are designed to replace the doors from ...

View full details
€8,95 - €25,95
€8,95 - €25,95
€8,95 - €25,95
€8,95
Wolf Rampant : Legion Deimos Round Doors 3d printed
Wolf Rampant : Legion Deimos Round Doors 3d printed

Wolf Rampant : Legion Deimos Round Doors

€8,95 - €25,95
€8,95 - €25,95
€8,95 - €25,95
€8,95

Legion Deimos Round Doors are customized parts that can fit on the Deimos-Pattern Rhino (DPR).* These parts are designed to replace the doors from ...

View full details
€8,95 - €25,95
€8,95 - €25,95
€8,95 - €25,95
€8,95
Hav-Launcher - R1 Hatch Turrets 3d printed
Hav-Launcher - R1 Hatch Turrets 3d printed

Hav-Launcher - R1 Hatch Turrets

€11,95 - €51,95
€11,95 - €51,95
€11,95 - €51,95
€11,95

These Hatch Turrets are designed to fit into the hatches of a standard troop tank, or similar size personal access point. Our customers have found ...

View full details
€11,95 - €51,95
€11,95 - €51,95
€11,95 - €51,95
€11,95
Heavy Slugger - R2 Hatch Turrets 3d printed
Heavy Slugger - R2 Hatch Turrets 3d printed

Heavy Slugger - R2 Hatch Turrets

€12,95 - €52,95
€12,95 - €52,95
€12,95 - €52,95
€12,95

NOTE: The SIZE Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue = 1 Hatch TurretMedium sprue = 2 Hatch TurretsLarge spr...

View full details
€12,95 - €52,95
€12,95 - €52,95
€12,95 - €52,95
€12,95

Featured collection

60x Maltese Cross : Shoulder Insignia pack 3d printed
60x Maltese Cross : Shoulder Insignia pack 3d printed

60x Maltese Cross : Shoulder Insignia pack

€15,95 - €15,95
€15,95
€15,95 - €15,95
€15,95

This insignia pack is designed to fit on any shoulder or rounded area of your favorite models. (YES, they fit the new marines) They are meant to pe...

View full details
€15,95 - €15,95
€15,95
€15,95 - €15,95
€15,95
4x10 Squad Making MultiPack 3d printed
4x10 Squad Making MultiPack 3d printed

4x10 Squad Making MultiPack

€20,95 - €22,95
€20,95 - €22,95
€20,95 - €22,95
€20,95

This pack contains 10 Tactical, 10 Assault, 10 Devestator, and 10 Comand marks, designed to fit on shoulder-like or rounded area of your favorite m...

View full details
€20,95 - €22,95
€20,95 - €22,95
€20,95 - €22,95
€20,95
Prime Marine - Adjustable Arms (PM) 3d printed
Prime Marine - Adjustable Arms (PM) 3d printed

Prime Marine - Adjustable Arms (PM)

€15,95 - €23,95
€15,95 - €23,95
€15,95 - €23,95
€15,95

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms)Medium sprue = 10 Sets (20 tot...

View full details
€15,95 - €23,95
€15,95 - €23,95
€15,95 - €23,95
€15,95
60x Kings Fist - Shoulder Insignia pack 3d printed
60x Kings Fist - Shoulder Insignia pack 3d printed

60x Kings Fist - Shoulder Insignia pack

€17,95 - €18,95
€17,95 - €18,95
€17,95 - €18,95
€17,95

This insignia pack is designed to fit on any shoulder or rounded area of your favorite models. (YES, they fit the new marines) They are meant to pe...

View full details
€17,95 - €18,95
€17,95 - €18,95
€17,95 - €18,95
€17,95
Xenos Hunters: Redemptor Honor Kit 3d printed
Xenos Hunters: Redemptor Honor Kit 3d printed

Xenos Hunters: Redemptor Honor Kit

€13,95 - €18,95
€13,95 - €18,95
€13,95 - €18,95
€13,95

These bits are designed to fit the Primaris Redemptor dreadnought model. They're meant to give your standard kit a unique look and provide raised e...

View full details
€13,95 - €18,95
€13,95 - €18,95
€13,95 - €18,95
€13,95

Antonis : Arch Battleknight Conversion Kit

€33,95 - €65,95
€33,95 - €65,95
€33,95 - €65,95
€33,95

This conversion kit is designed to fit a standard GW Nemesis Dreadknight model kit. It is not a full model, just parts to add to your model kit to ...

View full details
€33,95 - €65,95
€33,95 - €65,95
€33,95 - €65,95
€33,95
Deathwatch Set 1 : Shoulder Insignia pack 3d printed

Deathwatch Set 1 : Shoulder Insignia pack

€19,95 - €19,95
€19,95
€19,95 - €19,95
€19,95

This insignia pack is designed to fit on any shoulder or rounded area of your favorite models. (YES, they fit the new marines) They are meant to pe...

View full details
€19,95 - €19,95
€19,95
€19,95 - €19,95
€19,95
Gen:3 Iron - Adjustable Arms 3d printed
Gen:3 Iron - Adjustable Arms 3d printed Small = 5 Sets / Medium = 10 Sets

Gen:3 Iron - Adjustable Arms

€15,95 - €23,95
€15,95 - €23,95
€15,95 - €23,95
€15,95

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms) Medium sprue = 10 Sets (20 to...

View full details
€15,95 - €23,95
€15,95 - €23,95
€15,95 - €23,95
€15,95
60x Ultra Legion - Shoulder Insignia pack 3d printed
60x Ultra Legion - Shoulder Insignia pack 3d printed

60x Ultra Legion - Shoulder Insignia pack

€15,95 - €16,95
€15,95 - €16,95
€15,95 - €16,95
€15,95

This insignia pack is designed to fit on any shoulder or rounded area of your favorite models. (YES, they fit the new marines) They are meant to pe...

View full details
€15,95 - €16,95
€15,95 - €16,95
€15,95 - €16,95
€15,95
Gen:4 Maximus - Adjustable Arms 3d printed
Gen:4 Maximus - Adjustable Arms 3d printed

Gen:4 Maximus - Adjustable Arms

€15,95 - €23,95
€15,95 - €23,95
€15,95 - €23,95
€15,95

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms)Medium sprue = 10 Sets (20 tot...

View full details
€15,95 - €23,95
€15,95 - €23,95
€15,95 - €23,95
€15,95
10x Base - Crested G:10 Prime Helmets 3d printed
10x Base - Crested G:10 Prime Helmets 3d printed

10x Base - Crested G:11 Prime Helmets

€16,95 - €16,95
€16,95
€16,95 - €16,95
€16,95

The G:11 Prime Helmets were designed by the free-blade artist, Cornivius. It was inspired by the new Primaries models with a subtle ancient greek h...

View full details
€16,95 - €16,95
€16,95
€16,95 - €16,95
€16,95
View all Collection
View all Collection
Shop collection