Skip to content
Insignias Full Models Conv.Kits Marines Head Swaps Weapons Shields Vehicle Parts Walkers Apparel

Space Marine Armory

Twin Rapfire - R1 Hatch Turrets 3d printed
Twin Rapfire - R1 Hatch Turrets 3d printed Small = 1 Hatch Turret

Twin Rapfire - R1 Hatch Turrets

¥2,600 - ¥6,100
¥2,600 - ¥6,100
¥2,600 - ¥6,100
¥2,600

NOTE: The SIZE Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue = 1 Hatch TurretMedium sprue = 2 Hatch TurretsLarge spr...

View full details
¥2,600 - ¥6,100
¥2,600 - ¥6,100
¥2,600 - ¥6,100
¥2,600
4x Base - R1 Closed Hatchs 3d printed
4x Base - R1 Closed Hatchs 3d printed

4x Base - R1 Closed Hatchs

¥3,500 - ¥3,800
¥3,500 - ¥3,800
¥3,500 - ¥3,800
¥3,500

These closed hatchs are designed to fit into the holes of a standard troop tank, or similar size personal access point. Our customers have found th...

View full details
¥3,500 - ¥3,800
¥3,500 - ¥3,800
¥3,500 - ¥3,800
¥3,500
Heavy Melter - R2 Hatch Turrets 3d printed
Heavy Melter - R2 Hatch Turrets 3d printed

Heavy Melter - R2 Hatch Turrets

¥3,000 - ¥8,200
¥3,000 - ¥8,200
¥3,000 - ¥8,200
¥3,000

NOTE: The SIZE Selection Equates to Quantity per Sprue, NOT the Products’ Scale. Small sprue = 1 Hatch Turret Medium sprue = 2 Hatch Turrets Large ...

View full details
¥3,000 - ¥8,200
¥3,000 - ¥8,200
¥3,000 - ¥8,200
¥3,000
Mayhem Missile Launcher : Shots Fired 3d printed

Mayhem Missile Launcher : Shots Fired

¥3,100 - ¥3,300
¥3,100 - ¥3,300
¥3,100 - ¥3,300
¥3,100

The Mayhem Missle Launcher is designed to represent a Havoc launcher for the Chaos Space Marines. It will fit a standard Rhino by replacing this pi...

View full details
¥3,100 - ¥3,300
¥3,100 - ¥3,300
¥3,100 - ¥3,300
¥3,100
Meltafire - R1 Hatch Turrets 3d printed
Meltafire - R1 Hatch Turrets 3d printed Small = 1 Hatch Turret

Meltafire - R1 Hatch Turrets

¥2,700 - ¥6,800
¥2,700 - ¥6,800
¥2,700 - ¥6,800
¥2,700

NOTE: The SIZE Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue = 1 Hatch TurretMedium sprue = 2 Hatch TurretsLarge spr...

View full details
¥2,700 - ¥6,800
¥2,700 - ¥6,800
¥2,700 - ¥6,800
¥2,700
Mayhem Missile Launcher : Full Rack 3d printed

Mayhem Missile Launcher : Full Rack

¥3,100 - ¥3,300
¥3,100 - ¥3,300
¥3,100 - ¥3,300
¥3,100

The Mayhem Missle Launcher is designed to represent a Havoc launcher for the Chaos Space Marines. It will fit a standard Rhino by replacing this pi...

View full details
¥3,100 - ¥3,300
¥3,100 - ¥3,300
¥3,100 - ¥3,300
¥3,100
Heavy Melter - R2 Hatch Turrets 3d printed
Heavy Melter - R2 Hatch Turrets 3d printed

Heavy Melter - R2 Hatch Turrets (MR)

¥1,900 - ¥4,100
¥1,900 - ¥4,100
¥1,900 - ¥4,100
¥1,900

NOTE: Size Selection Equates to Quantity per Sprue, Not the Products’ Scale. Small sprue = 1 Hatch Turret Medium sprue = 2 Hatch Turrets Large spru...

View full details
¥1,900 - ¥4,100
¥1,900 - ¥4,100
¥1,900 - ¥4,100
¥1,900
Heavy Combo 4 Pack - R2 Hatch Turrets 3d printed
Heavy Combo 4 Pack - R2 Hatch Turrets 3d printed

Heavy Combo 4 Pack - R2 Hatch Turrets

¥7,200 - ¥8,600
¥7,200 - ¥8,600
¥7,200 - ¥8,600
¥7,200

This Combo Pack inclides 1  each of the following: Bolt Cannon, Heavy Melter, Heavy Scorcher, and Heavy Slugger  - R2 Hatch Turrets These Hatch Tu...

View full details
¥7,200 - ¥8,600
¥7,200 - ¥8,600
¥7,200 - ¥8,600
¥7,200
Bolt Cannon - R2 Hatch Turrets 3d printed
Bolt Cannon - R2 Hatch Turrets 3d printed

Bolt Cannon - R2 Hatch Turrets

¥3,000 - ¥8,200
¥3,000 - ¥8,200
¥3,000 - ¥8,200
¥3,000

NOTE: The SIZE Selection Equates to Quantity per Sprue, NOT the Products’ Scale. Small sprue = 1 Hatch Turret Medium sprue = 2 Hatch Turrets Large ...

View full details
¥3,000 - ¥8,200
¥3,000 - ¥8,200
¥3,000 - ¥8,200
¥3,000
4 Piece Combo - R1 Hatch Turrets 3d printed

4 Piece Combo - R1 Hatch Turrets (MR)

¥2,400 - ¥2,900
¥2,400 - ¥2,900
¥2,400 - ¥2,900
¥2,400

This kit includes: 1  Twin Rapfire, 1 Flamefire, 1 Meltafire, & 1 Plasfire TurretThese Hatch Turrets are designed to fit into the hatches of a ...

View full details
¥2,400 - ¥2,900
¥2,400 - ¥2,900
¥2,400 - ¥2,900
¥2,400
Flamefire - R1 Hatch Turrets 3d printed
Flamefire - R1 Hatch Turrets 3d printed Small = 1 Hatch Turret

Flamefire - R1 Hatch Turrets

¥2,600 - ¥6,700
¥2,600 - ¥6,700
¥2,600 - ¥6,700
¥2,600

NOTE: The SIZE Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue = 1 Hatch TurretMedium sprue = 2 Hatch TurretsLarge spr...

View full details
¥2,600 - ¥6,700
¥2,600 - ¥6,700
¥2,600 - ¥6,700
¥2,600
Plasfire - R1 Hatch Turrets 3d printed
Plasfire - R1 Hatch Turrets 3d printed Small = 1 Hatch Turret

Plasfire - R1 Hatch Turrets

¥2,600 - ¥6,700
¥2,600 - ¥6,700
¥2,600 - ¥6,700
¥2,600

NOTE: The SIZE Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue = 1 Hatch TurretMedium sprue = 2 Hatch TurretsLarge spr...

View full details
¥2,600 - ¥6,700
¥2,600 - ¥6,700
¥2,600 - ¥6,700
¥2,600
Heavy Combo 4 Pack - R2 Hatch Turrets 3d printed

Heavy Combo 4 Pack - R2 Hatch Turrets (MR)

¥4,100 - ¥4,100
¥4,100
¥4,100 - ¥4,100
¥4,100

This Combo Pack inclides 1  each of the following: Bolt Cannon, Heavy Melter, Heavy Scorcher, and Heavy Slugger  - R2 Hatch Turrets These Hatch Tu...

View full details
¥4,100 - ¥4,100
¥4,100
¥4,100 - ¥4,100
¥4,100
Heavy Slugger - R2 Hatch Turrets 3d printed
Heavy Slugger - R2 Hatch Turrets 3d printed

Heavy Slugger - R2 Hatch Turrets (MR)

¥1,900 - ¥4,100
¥1,900 - ¥4,100
¥1,900 - ¥4,100
¥1,900

NOTE: Size Selection Equates to Quantity per Sprue, Not the Products’ Scale. Small sprue = 1 Hatch Turret Medium sprue = 2 Hatch Turrets Large spru...

View full details
¥1,900 - ¥4,100
¥1,900 - ¥4,100
¥1,900 - ¥4,100
¥1,900
Heavy Scorcher - R2 Hatch Turrets 3d printed
Heavy Scorcher - R2 Hatch Turrets 3d printed

Heavy Scorcher - R2 Hatch Turrets

¥3,100 - ¥8,700
¥3,100 - ¥8,700
¥3,100 - ¥8,700
¥3,100

NOTE: The SIZE Selection Equates to Quantity per Sprue, NOT the Products’ Scale. Small sprue = 1 Hatch Turret Medium sprue = 2 Hatch Turrets Large ...

View full details
¥3,100 - ¥8,700
¥3,100 - ¥8,700
¥3,100 - ¥8,700
¥3,100
Hav-Launcher - R2 Hatch Turrets 3d printed
Hav-Launcher - R2 Hatch Turrets 3d printed

Hav-Launcher - R2 Hatch Turrets

¥3,700 - ¥11,500
¥3,700 - ¥11,500
¥3,700 - ¥11,500
¥3,700

NOTE: The SIZE Selection Equates to Quantity per Sprue, NOT the Products’ Scale. Small sprue = 1 Hatch Turret Medium sprue = 2 Hatch Turrets Large ...

View full details
¥3,700 - ¥11,500
¥3,700 - ¥11,500
¥3,700 - ¥11,500
¥3,700
Heavy Scorcher - R2 Hatch Turrets 3d printed
Heavy Scorcher - R2 Hatch Turrets 3d printed

Heavy Scorcher - R2 Hatch Turrets (MR)

¥1,900 - ¥4,100
¥1,900 - ¥4,100
¥1,900 - ¥4,100
¥1,900

NOTE: Size Selection Equates to Quantity per Sprue, Not the Products’ Scale. Small sprue = 1 Hatch Turret Medium sprue = 2 Hatch Turrets Large spru...

View full details
¥1,900 - ¥4,100
¥1,900 - ¥4,100
¥1,900 - ¥4,100
¥1,900

Hav-Launcher - R1 Hatch Turrets (MR)

¥1,600 - ¥5,000
¥1,600 - ¥5,000
¥1,600 - ¥5,000
¥1,600

NOTE: The SIZE Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue = 1 Hatch TurretMedium sprue = 2 Hatch TurretsLarge spr...

View full details
¥1,600 - ¥5,000
¥1,600 - ¥5,000
¥1,600 - ¥5,000
¥1,600
4 Piece Combo - R1 Hatch Turrets 3d printed Similar Product with Vehicle Insignia on the top.
4 Piece Combo - R1 Hatch Turrets 3d printed

4 Piece Combo - R1 Hatch Turrets

¥5,700 - ¥6,800
¥5,700 - ¥6,800
¥5,700 - ¥6,800
¥5,700

This kit includes: 1  Twin Rapfire, 1 Flamefire, 1 Meltafire, & 1 Plasfire Turret These Hatch Turrets are designed to fit into the hatches of ...

View full details
¥5,700 - ¥6,800
¥5,700 - ¥6,800
¥5,700 - ¥6,800
¥5,700
Hav-Launcher - R1 Hatch Turrets 3d printed
Hav-Launcher - R1 Hatch Turrets 3d printed

Hav-Launcher - R1 Hatch Turrets

¥3,100 - ¥8,600
¥3,100 - ¥8,600
¥3,100 - ¥8,600
¥3,100

NOTE: The SIZE Selection Equates to Quantity per Sprue, NOT the Products’ Scale. Small sprue = 1 Hatch Turret Medium sprue = 2 Hatch Turrets Large ...

View full details
¥3,100 - ¥8,600
¥3,100 - ¥8,600
¥3,100 - ¥8,600
¥3,100
Blank : Mark-2 APC Frontplate 3d printed
Blank : Mark-2 APC Frontplate 3d printed

Blank : Mark-2 APC Frontplate

¥2,700 - ¥2,800
¥2,700 - ¥2,800
¥2,700 - ¥2,800
¥2,700

Enhance and personalize your standard marine troop carrier with this unique Armored Personnel Carrier (APC) Frontplate. Sold unpainted, this part i...

View full details
¥2,700 - ¥2,800
¥2,700 - ¥2,800
¥2,700 - ¥2,800
¥2,700
Blank Banner : Mark-2 APC Frontplate 3d printed
Blank Banner : Mark-2 APC Frontplate 3d printed

Blank Banner : Mark-2 APC Frontplate

¥2,700 - ¥2,800
¥2,700 - ¥2,800
¥2,700 - ¥2,800
¥2,700

Enhance and personalize your standard marine troop carrier with this unique Armored Personnel Carrier (APC) Frontplate. Sold unpainted, this part i...

View full details
¥2,700 - ¥2,800
¥2,700 - ¥2,800
¥2,700 - ¥2,800
¥2,700
Tactical/Assault : Top-Hatch Component 3d printed

Tactical/Assault : Top-Hatch Component (MR)

¥1,600 - ¥1,600
¥1,600
¥1,600 - ¥1,600
¥1,600

These Top-hatch Components are meant to fit onto the Rhino Chassis or Rhinoback crew compartment conversion kit. They have 2 different sides and fi...

View full details
¥1,600 - ¥1,600
¥1,600
¥1,600 - ¥1,600
¥1,600
Bolt Cannon - R2 Hatch Turrets 3d printed
Bolt Cannon - R2 Hatch Turrets 3d printed

Bolt Cannon - R2 Hatch Turrets (MR)

¥1,900 - ¥4,100
¥1,900 - ¥4,100
¥1,900 - ¥4,100
¥1,900

NOTE: Size Selection Equates to Quantity per Sprue, Not the Products’ Scale. Small sprue = 1 Hatch Turret Medium sprue = 2 Hatch Turrets Large spru...

View full details
¥1,900 - ¥4,100
¥1,900 - ¥4,100
¥1,900 - ¥4,100
¥1,900
Heavy Slugger - R2 Hatch Turrets 3d printed
Heavy Slugger - R2 Hatch Turrets 3d printed

Heavy Slugger - R2 Hatch Turrets

¥3,100 - ¥8,700
¥3,100 - ¥8,700
¥3,100 - ¥8,700
¥3,100

NOTE: The SIZE Selection Equates to Quantity per Sprue, NOT the Products’ Scale. Small sprue = 1 Hatch Turret Medium sprue = 2 Hatch Turrets Large ...

View full details
¥3,100 - ¥8,700
¥3,100 - ¥8,700
¥3,100 - ¥8,700
¥3,100

Featured collection

60x Maltese Cross : Shoulder Insignia pack 3d printed
60x Maltese Cross : Shoulder Insignia pack 3d printed

60x Maltese Cross : Shoulder Insignia pack

¥2,700 - ¥2,700
¥2,700
¥2,700 - ¥2,700
¥2,700

This insignia pack is designed to fit on any shoulder or rounded area of your favorite models. (YES, they fit the new marines) They are meant to pe...

View full details
¥2,700 - ¥2,700
¥2,700
¥2,700 - ¥2,700
¥2,700
4x10 Squad Making MultiPack 3d printed
4x10 Squad Making MultiPack 3d printed

4x10 Squad Making MultiPack

¥3,400 - ¥3,800
¥3,400 - ¥3,800
¥3,400 - ¥3,800
¥3,400

This pack contains 10 Tactical, 10 Assault, 10 Devestator, and 10 Comand marks, designed to fit on shoulder-like or rounded area of your favorite m...

View full details
¥3,400 - ¥3,800
¥3,400 - ¥3,800
¥3,400 - ¥3,800
¥3,400
Prime Marine - Adjustable Arms (PM) 3d printed
Prime Marine - Adjustable Arms (PM) 3d printed

Prime Marine - Adjustable Arms (PM)

¥2,600 - ¥4,000
¥2,600 - ¥4,000
¥2,600 - ¥4,000
¥2,600

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms)Medium sprue = 10 Sets (20 tot...

View full details
¥2,600 - ¥4,000
¥2,600 - ¥4,000
¥2,600 - ¥4,000
¥2,600
Arch Battleknight: Antonis 3d printed
Arch Battleknight: Antonis 3d printed

Arch Battleknight: Antonis

¥9,600 - ¥11,000
¥9,600 - ¥11,000
¥9,600 - ¥11,000
¥9,600

This conversion kit is designed to fit a standard GW Nemesis Dreadknight model kit. It is not a full model, just parts to add to your model kit to ...

View full details
¥9,600 - ¥11,000
¥9,600 - ¥11,000
¥9,600 - ¥11,000
¥9,600
60x Kings Fist - Shoulder Insignia pack 3d printed
60x Kings Fist - Shoulder Insignia pack 3d printed

60x Kings Fist - Shoulder Insignia pack

¥2,900 - ¥3,100
¥2,900 - ¥3,100
¥2,900 - ¥3,100
¥2,900

This insignia pack is designed to fit on any shoulder or rounded area of your favorite models. (YES, they fit the new marines) They are meant to pe...

View full details
¥2,900 - ¥3,100
¥2,900 - ¥3,100
¥2,900 - ¥3,100
¥2,900
Gen:4 Maximus - Adjustable Arms 3d printed
Gen:4 Maximus - Adjustable Arms 3d printed

Gen:4 Maximus - Adjustable Arms

¥2,600 - ¥3,900
¥2,600 - ¥3,900
¥2,600 - ¥3,900
¥2,600

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms)Medium sprue = 10 Sets (20 tot...

View full details
¥2,600 - ¥3,900
¥2,600 - ¥3,900
¥2,600 - ¥3,900
¥2,600
Gen:3 Iron - Adjustable Arms 3d printed
Gen:3 Iron - Adjustable Arms 3d printed Small = 5 Sets / Medium = 10 Sets

Gen:3 Iron - Adjustable Arms

¥2,600 - ¥4,000
¥2,600 - ¥4,000
¥2,600 - ¥4,000
¥2,600

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms) Medium sprue = 10 Sets (20 to...

View full details
¥2,600 - ¥4,000
¥2,600 - ¥4,000
¥2,600 - ¥4,000
¥2,600
60x Ultra Legion - Shoulder Insignia pack 3d printed
60x Ultra Legion - Shoulder Insignia pack 3d printed

60x Ultra Legion - Shoulder Insignia pack

¥2,700 - ¥2,800
¥2,700 - ¥2,800
¥2,700 - ¥2,800
¥2,700

This insignia pack is designed to fit on any shoulder or rounded area of your favorite models. (YES, they fit the new marines) They are meant to pe...

View full details
¥2,700 - ¥2,800
¥2,700 - ¥2,800
¥2,700 - ¥2,800
¥2,700
10x Base - Crested G:10 Prime Helmets 3d printed
10x Base - Crested G:10 Prime Helmets 3d printed

10x Base - Crested G:10 Prime Helmets

¥2,800 - ¥2,800
¥2,800
¥2,800 - ¥2,800
¥2,800

The G:10 Prime Helmets were designed by the free-blade artist, Cornivius. It was inspired by the new Primaries models with a subtle ancient greek h...

View full details
¥2,800 - ¥2,800
¥2,800
¥2,800 - ¥2,800
¥2,800
Deathwatch Set 1 : Shoulder Insignia pack 3d printed

Deathwatch Set 1 : Shoulder Insignia pack

¥3,200 - ¥3,300
¥3,200 - ¥3,300
¥3,200 - ¥3,300
¥3,200

This insignia pack is designed to fit on any shoulder or rounded area of your favorite models. (YES, they fit the new marines) They are meant to pe...

View full details
¥3,200 - ¥3,300
¥3,200 - ¥3,300
¥3,200 - ¥3,300
¥3,200
Xenos Hunters: Redemptor Honor Kit 3d printed
Xenos Hunters: Redemptor Honor Kit 3d printed

Xenos Hunters: Redemptor Honor Kit

¥3,000 - ¥3,100
¥3,000 - ¥3,100
¥3,000 - ¥3,100
¥3,000

These bits are designed to fit the Primaris Redemptor dreadnought model. They're meant to give your standard kit a unique look and provide raised e...

View full details
¥3,000 - ¥3,100
¥3,000 - ¥3,100
¥3,000 - ¥3,100
¥3,000
View all Collection
View all Collection
Shop collection