Skip to content
Insignias Full Models Conv.Kits Marines Head Swaps Weapons Shields Vehicle Parts Walkers Apparel

Kings Fist Legions

The Kings Fists are recognised to be among the most loyal and stubborn legions in the empire. They have been instrumental in holding humanity together during the bleakest of times with their renowned defensive prowess. 

Customers find these bits work exceptionally well with their Imperial Fist, Crimson Fist, and most all their succor chapters. These bits are designed to fit 28mm scale miniatures from your favorite tabletop wargame.

B2-Mag Vexilla w/Prime:1 PAC 3d printed utilizes two, 1/16" x 1/8" (2mm x 3mm) Cylinder Magnets
B2-Mag Vexilla w/Prime:1 PAC 3d printed Size = Quantity per Sprue. / S=1, M=2, L=4

Banner - Prime:1 Vexilla PAC

¥2,400 - ¥4,600
¥2,400 - ¥4,600
¥2,400 - ¥4,600
¥2,400

The Mag Vexilla system utilizes two, 1/16" x 1/8" (2mm x 3mm) Cylinder Magnets, to affix the Vexilla (banner) to the backpack. This allows you to r...

View full details
¥2,400 - ¥4,600
¥2,400 - ¥4,600
¥2,400 - ¥4,600
¥2,400
B3-Mag Vexilla w/Prime:1 PAC [Insignia-Ready] 3d printed utilizes two, 1/16" x 1/8" (2mm x 3mm) Cylinder Magnets
B3-Mag Vexilla w/Prime:1 PAC [Insignia-Ready] 3d printed Size = Quantity per Sprue. / S=1, M=2, L=4

Signum - Prime:1 Vexilla PAC [Insignia-Ready]

¥2,300 - ¥4,300
¥2,300 - ¥4,300
¥2,300 - ¥4,300
¥2,300

The Mag Vexilla system utilizes two, 1/16" x 1/8" (2mm x 3mm) Cylinder Magnets, to affix the Vexilla (banner) to the backpack. This allows you to r...

View full details
¥2,300 - ¥4,300
¥2,300 - ¥4,300
¥2,300 - ¥4,300
¥2,300
B1-Mag Vexilla w/Prime:1 PAC [Insignia-Ready] 3d printed
B1-Mag Vexilla w/Prime:1 PAC [Insignia-Ready] 3d printed Size = Quantity per Sprue. / S=1, M=2, L=4

Labarum - Prime:1 Vexilla PAC [Insignia-Ready]

¥2,400 - ¥4,900
¥2,400 - ¥4,900
¥2,400 - ¥4,900
¥2,400

The Mag Vexilla system utilizes two, 1/16" x 1/8" (2mm x 3mm) Cylinder Magnets, to affix the Vexilla (banner) to the backpack. This allows you to r...

View full details
¥2,400 - ¥4,900
¥2,400 - ¥4,900
¥2,400 - ¥4,900
¥2,400
B4-Mag Vexilla w/Prime:1 PAC [Insignia-Ready] 3d printed utilizes two, 1/16" x 1/8" (2mm x 3mm) Cylinder Magnets
B4-Mag Vexilla w/Prime:1 PAC [Insignia-Ready] 3d printed Size = Quantity per Sprue. / S=1, M=2, L=4

Laureled - Prime:1 Vexilla PAC [Insignia-Ready]

¥2,300 - ¥4,700
¥2,300 - ¥4,700
¥2,300 - ¥4,700
¥2,300

The Mag Vexilla system utilizes two, 1/16" x 1/8" (2mm x 3mm) Cylinder Magnets, to affix the Vexilla (banner) to the backpack. This allows you to r...

View full details
¥2,300 - ¥4,700
¥2,300 - ¥4,700
¥2,300 - ¥4,700
¥2,300

Featured collection

60x Maltese Cross : Shoulder Insignia pack 3d printed
60x Maltese Cross : Shoulder Insignia pack 3d printed

60x Maltese Cross : Shoulder Insignia pack

¥2,900 - ¥3,200
¥2,900 - ¥3,200
¥2,900 - ¥3,200
¥2,900

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥2,900 - ¥3,200
¥2,900 - ¥3,200
¥2,900 - ¥3,200
¥2,900
4x10 Squad Making MultiPack 3d printed
4x10 Squad Making MultiPack 3d printed

4x10 Squad Making MultiPack

¥3,800 - ¥4,100
¥3,800 - ¥4,100
¥3,800 - ¥4,100
¥3,800

This pack contains 10 Tactical, 10 Assault, 10 Devestator, and 10 Comand marks, designed to fit on shoulder-like or rounded area of your favorite m...

View full details
¥3,800 - ¥4,100
¥3,800 - ¥4,100
¥3,800 - ¥4,100
¥3,800
Xenos Hunters: Redemptor Honor Kit 3d printed

Xenos Hunters: Redemptor Honor Kit

¥2,400 - ¥3,300
¥2,400 - ¥3,300
¥2,400 - ¥3,300
¥2,400

These bits are designed to fit the Primaris Redemptor dreadnought model. They're meant to give your standard kit a unique look and provide raised e...

View full details
¥2,400 - ¥3,300
¥2,400 - ¥3,300
¥2,400 - ¥3,300
¥2,400
Prime Marine - Adjustable Arms (PM) 3d printed
Prime Marine - Adjustable Arms (PM) 3d printed

Prime Marine - Adjustable Arms (PM)

¥2,800 - ¥4,100
¥2,800 - ¥4,100
¥2,800 - ¥4,100
¥2,800

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms)Medium sprue = 10 Sets (20 tot...

View full details
¥2,800 - ¥4,100
¥2,800 - ¥4,100
¥2,800 - ¥4,100
¥2,800
Deathwatch Set 1 : Shoulder Insignia pack 3d printed

Deathwatch Set 1 : Shoulder Insignia pack

¥3,200 - ¥3,500
¥3,200 - ¥3,500
¥3,200 - ¥3,500
¥3,200

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥3,200 - ¥3,500
¥3,200 - ¥3,500
¥3,200 - ¥3,500
¥3,200
60x Kings Fist - Shoulder Insignia pack 3d printed
60x Kings Fist - Shoulder Insignia pack 3d printed

60x Kings Fist - Shoulder Insignia pack

¥3,700 - ¥4,300
¥3,700 - ¥4,300
¥3,700 - ¥4,300
¥3,700

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥3,700 - ¥4,300
¥3,700 - ¥4,300
¥3,700 - ¥4,300
¥3,700

Antonis : Arch Battleknight Conversion Kit

¥5,900 - ¥11,400
¥5,900 - ¥11,400
¥5,900 - ¥11,400
¥5,900

This conversion kit is designed to fit a standard GW Nemesis Dreadknight model kit. It is not a full model, just parts to add to your model kit to ...

View full details
¥5,900 - ¥11,400
¥5,900 - ¥11,400
¥5,900 - ¥11,400
¥5,900
10x Base - Crested G:10 Prime Helmets 3d printed
10x Base - Crested G:10 Prime Helmets 3d printed

10x Base - Crested G:11 Prime Helmets

¥3,000 - ¥3,000
¥3,000
¥3,000 - ¥3,000
¥3,000

The G:11 Prime Helmets were designed by the free-blade artist, Cornivius. It was inspired by the new Primaries models with a subtle ancient greek h...

View full details
¥3,000 - ¥3,000
¥3,000
¥3,000 - ¥3,000
¥3,000
60x Ultra Legion - Shoulder Insignia pack 3d printed
60x Ultra Legion - Shoulder Insignia pack 3d printed

60x Ultra Legion - Shoulder Insignia pack

¥3,700 - ¥4,300
¥3,700 - ¥4,300
¥3,700 - ¥4,300
¥3,700

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥3,700 - ¥4,300
¥3,700 - ¥4,300
¥3,700 - ¥4,300
¥3,700
Gen:3 Iron - Adjustable Arms 3d printed
Gen:3 Iron - Adjustable Arms 3d printed Small = 5 Sets / Medium = 10 Sets

Gen:3 Iron - Adjustable Arms

¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms) Medium sprue = 10 Sets (20 to...

View full details
¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800
10x Deathwatch - T:1a Terminator Shoulders 3d printed
10x Deathwatch - T:1a Terminator Shoulders 3d printed

10x Xenos Hunters - 5th Ed. Firstborn Terminator Pads

¥3,300 - ¥3,500
¥3,300 - ¥3,500
¥3,300 - ¥3,500
¥3,300

The 5th Edition Terminator Series of shoulder pads was designed for the classic Indomitus or Chaos (Firstborn) Terminator models. These pads can be...

View full details
¥3,300 - ¥3,500
¥3,300 - ¥3,500
¥3,300 - ¥3,500
¥3,300
View all Collection
View all Collection
Shop collection