Skip to content
Insignias Full Models Conv.Kits Marines Head Swaps Weapons Shields Vehicle Parts Walkers Apparel

Monkey Resin 3

Monkey Resin 3 is a high-quality UV cured resin that will come attached to a support structure from the production process. The parts are however, pre-cleaned and ready for primer once removed. Use only super glue to adhere these parts to your models.

To remove the bits from their supports: submerge the whole assembly in water that is hot to the touch for 5 minutes. Use your fingernail to punch away several supports to create a starting point, and carefully peel your parts off of the remaining supports all together.

You can use a very fine-grit sandpaper if needed to smooth any surface or feature further. Always be sure to wear a mask when working around resin dust.

Night Tyrants - Vulture Jetpacks (SM) 3d printed
Night Tyrants - Vulture Jetpacks (SM) 3d printed Get 1 Standard-Sized Pack

Night Tyrants - Vulture Jetpacks (SM)

¥2,300 - ¥5,700
¥2,300 - ¥5,700
¥2,300 - ¥5,700
¥2,300

The Vulture Jetpack (SM) is a custom-designed jetpack styled like the classic Raptor Jump packs. Use them to replace the backpacks of a classic mar...

View full details
¥2,300 - ¥5,700
¥2,300 - ¥5,700
¥2,300 - ¥5,700
¥2,300

10x Base - Chaos:1 PACs

¥3,200 - ¥6,200
¥3,200 - ¥6,200
¥3,200 - ¥6,200
¥3,200

The Chaos:1 PACs (Personal Atomic Cores) are inspired by the standard fifth edition Chaos Space Marine backpacks. Our customers have found that the...

View full details
¥3,200 - ¥6,200
¥3,200 - ¥6,200
¥3,200 - ¥6,200
¥3,200
Base - Vampire Jetpacks (PM) 3d printed
Base - Vampire Jetpacks (PM) 3d printed

Vampire Jetpacks (PM)

¥2,300 - ¥5,800
¥2,300 - ¥5,800
¥2,300 - ¥5,800
¥2,300

The Vampire Jetpack (PM) is a custom-designed jetpack styled like the classic Raptor Jump packs. They can be used to replace the backpacks of the n...

View full details
¥2,300 - ¥5,800
¥2,300 - ¥5,800
¥2,300 - ¥5,800
¥2,300
Base - Vulture Jetpacks (SM) 3d printed
Base - Vulture Jetpacks (SM) 3d printed For Older Standard-Sized Marines

Base - Vulture Jetpacks (SM)

¥2,300 - ¥5,700
¥2,300 - ¥5,700
¥2,300 - ¥5,700
¥2,300

The Vulture Jetpack (SM) is a custom-designed jetpack styled like the classic Raptor Jump packs. Use them to replace the backpacks of a classic mar...

View full details
¥2,300 - ¥5,700
¥2,300 - ¥5,700
¥2,300 - ¥5,700
¥2,300
Hydra Legion - Prime:1 PACs [Squad 1] 3d printed
Hydra Legion - Prime:1 PACs [Squad 1] 3d printed

Hydra Legion - Prime:1 PACs Squad Set (Mag-Vex)

¥3,700 - ¥5,800
¥3,700 - ¥5,800
¥3,700 - ¥5,800
¥3,700

The Prime:1 PACs (Personal Atomic Cores) are designed for the new, bigger “Prime” Marine models. Give your troops a unique look by adding these cus...

View full details
¥3,700 - ¥5,800
¥3,700 - ¥5,800
¥3,700 - ¥5,800
¥3,700
Night Tyrants - Vampire Jetpacks (PM) 3d printed
Night Tyrants - Vampire Jetpacks (PM) 3d printed Get 1 Prime-Sized Pack

Night Tyrants - Vampire Jetpacks (PM)

¥2,300 - ¥5,800
¥2,300 - ¥5,800
¥2,300 - ¥5,800
¥2,300

The Vampire Jetpack (PM) is a custom-designed jetpack styled like the classic Raptor Jump packs. They can be used to replace the backpacks of the n...

View full details
¥2,300 - ¥5,800
¥2,300 - ¥5,800
¥2,300 - ¥5,800
¥2,300
Nightmare Cult - Chordata Jetpack (SM) 3d printed
Nightmare Cult - Chordata Jetpack (SM) 3d printed Small = 1 Jetpack

Nightmare Cult - Chordata Jetpack (SM)

¥2,200 - ¥8,100
¥2,200 - ¥8,100
¥2,200 - ¥8,100
¥2,200

The Chordata Jetpack (SM) is a custom-designed jetpack meant to replace the backpacks of classic marine models to give them a unique profile on the...

View full details
¥2,200 - ¥8,100
¥2,200 - ¥8,100
¥2,200 - ¥8,100
¥2,200
10x Base - Chaos 3:ED PACs 3d printed
10x Base - Chaos 3:ED PACs 3d printed

10x Base - Chaos:3 PACs

¥3,100 - ¥6,200
¥3,100 - ¥6,200
¥3,100 - ¥6,200
¥3,100

The Chaos:3 PACs (Personal Atomic Cores) are inspired by the classic Chaos Marine backpacks from third edition. Our customers have found that these...

View full details
¥3,100 - ¥6,200
¥3,100 - ¥6,200
¥3,100 - ¥6,200
¥3,100
10x Skull - Chaos 3:ED PACs 3d printed
10x Skull - Chaos 3:ED PACs 3d printed

10x Skull - Chaos:3 PACs

¥3,100 - ¥6,200
¥3,100 - ¥6,200
¥3,100 - ¥6,200
¥3,100

The Chaos:3 PACs (Personal Atomic Cores) are inspired by the classic Chaos Marine backpacks from third edition. Our customers have found that these...

View full details
¥3,100 - ¥6,200
¥3,100 - ¥6,200
¥3,100 - ¥6,200
¥3,100
Night Tyrants - Chordero Jetpacks (PM) 3d printed
Night Tyrants - Chordero Jetpacks (PM) 3d printed

Night Tyrants - Chordero Jetpacks (PM)

¥2,500 - ¥7,500
¥2,500 - ¥7,500
¥2,500 - ¥7,500
¥2,500

The Chordero Jetpack (PM) is a custom-designed jetpack that is meant to replace the backpacks of the new “Prime” marine models to turn it into an a...

View full details
¥2,500 - ¥7,500
¥2,500 - ¥7,500
¥2,500 - ¥7,500
¥2,500
Dark Legion - Chordero Jetpack (PM) 3d printed
Dark Legion - Chordero Jetpack (PM) 3d printed

Dark Legion - Chordero Jetpack (PM)

¥2,500 - ¥7,500
¥2,500 - ¥7,500
¥2,500 - ¥7,500
¥2,500

The Chordero Jetpack (PM) is a custom-designed jetpack that is meant to replace the backpacks of the new “Prime” marine models to turn it into an a...

View full details
¥2,500 - ¥7,500
¥2,500 - ¥7,500
¥2,500 - ¥7,500
¥2,500
10x Decay Trooper - Chaos 3:ED PACs 3d printed
10x Decay Trooper - Chaos 3:ED PACs 3d printed

Plague Trooper - Chaos:3 PACs

¥2,400 - ¥7,600
¥2,400 - ¥7,600
¥2,400 - ¥7,600
¥2,400

The Chaos:3 PACs (Personal Atomic Cores) are inspired by the classic Chaos Marine backpacks from third edition. Our customers have found that these...

View full details
¥2,400 - ¥7,600
¥2,400 - ¥7,600
¥2,400 - ¥7,600
¥2,400
Hydra Legion - Prime:1 PACs Squad Set 3d printed
Hydra Legion - Prime:1 PACs Squad Set 3d printed

Hydra Legion - Prime:1 PACs Squad Set

¥3,200 - ¥5,400
¥3,200 - ¥5,400
¥3,200 - ¥5,400
¥3,200

The Prime:1 PACs (Personal Atomic Cores) are specifically designed for the new, larger "Prime" Marine models and feature a square back attachment. ...

View full details
¥3,200 - ¥5,400
¥3,200 - ¥5,400
¥3,200 - ¥5,400
¥3,200
Nightmare Cult - Chordero Jetpacks (PM) 3d printed

Nightmare Cult - Chordero Jetpacks (PM)

¥2,500 - ¥7,500
¥2,500 - ¥7,500
¥2,500 - ¥7,500
¥2,500

The Chordero Jetpack (PM) is a custom-designed jetpack that is meant to replace the backpacks of the new “Prime” marine models to turn it into an a...

View full details
¥2,500 - ¥7,500
¥2,500 - ¥7,500
¥2,500 - ¥7,500
¥2,500

Ghosts of Nocturne - Prime:1 PACs Squad Set 1

¥3,200 - ¥5,400
¥3,200 - ¥5,400
¥3,200 - ¥5,400
¥3,200

The Prime:1 PACs (Personal Atomic Cores) are specifically designed for the new, larger "Prime" Marine models and feature a square back attachment. ...

View full details
¥3,200 - ¥5,400
¥3,200 - ¥5,400
¥3,200 - ¥5,400
¥3,200
10x Alpha Omega - Prime:1 PACs 3d printed
10x Alpha Omega - Prime:1 PACs 3d printed Designed for the new, bigger “Prime” Marine models

10x Alpha Omega - Prime:1 PACs

¥3,200 - ¥5,200
¥3,200 - ¥5,200
¥3,200 - ¥5,200
¥3,200

The Prime:1 PACs (Personal Atomic Cores) are specifically designed for the new, larger "Prime" Marine models and feature a square back attachment. ...

View full details
¥3,200 - ¥5,200
¥3,200 - ¥5,200
¥3,200 - ¥5,200
¥3,200
4x Mag Vexilla - Chaos:1 PACs 3d printed utilizes two, 1/16" x 1/8" (2mm x 3mm) Cylinder Magnets

Base - Chaos:1 Mag Vexilla PACs

¥2,200 - ¥3,200
¥2,200 - ¥3,200
¥2,200 - ¥3,200
¥2,200

The Mag Vexilla system utilizes two, 1/16" x 1/8" (2mm x 3mm) Cylinder Magnets, to affix the Vexilla  (banner) to the backpack (Vexilla sold separa...

View full details
¥2,200 - ¥3,200
¥2,200 - ¥3,200
¥2,200 - ¥3,200
¥2,200

10x The Pyres Cohort - Chaos:1 PACs w/Candles

¥3,400 - ¥6,500
¥3,400 - ¥6,500
¥3,400 - ¥6,500
¥3,400

The Chaos:1 PACs (Personal Atomic Cores) are inspired by the standard fifth edition Chaos Space Marine backpacks. Our customers have found that the...

View full details
¥3,400 - ¥6,500
¥3,400 - ¥6,500
¥3,400 - ¥6,500
¥3,400

10x The Pyres Cohort - Chaos:1 PACs Set 1

¥3,200 - ¥6,200
¥3,200 - ¥6,200
¥3,200 - ¥6,200
¥3,200

The Chaos:1 PACs (Personal Atomic Cores) are inspired by the standard fifth edition Chaos Space Marine backpacks. Our customers have found that the...

View full details
¥3,200 - ¥6,200
¥3,200 - ¥6,200
¥3,200 - ¥6,200
¥3,200

Plague Surgeon : Grugalorian

¥3,000 - ¥3,000
¥3,000
¥3,000 - ¥3,000
¥3,000

Grugalorian is a full model kit that harkens back to an "old-school" plague marine look, but can stand eye-to-eye with the newer larger marines. Ou...

View full details
¥3,000 - ¥3,000
¥3,000
¥3,000 - ¥3,000
¥3,000

Featured collection

60x Maltese Cross : Shoulder Insignia pack 3d printed
60x Maltese Cross : Shoulder Insignia pack 3d printed

60x Maltese Cross : Shoulder Insignia pack

¥2,700 - ¥3,000
¥2,700 - ¥3,000
¥2,700 - ¥3,000
¥2,700

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥2,700 - ¥3,000
¥2,700 - ¥3,000
¥2,700 - ¥3,000
¥2,700
4x10 Squad Making MultiPack 3d printed
4x10 Squad Making MultiPack 3d printed

4x10 Squad Making MultiPack

¥3,700 - ¥4,000
¥3,700 - ¥4,000
¥3,700 - ¥4,000
¥3,700

This pack contains 10 Tactical, 10 Assault, 10 Devestator, and 10 Comand marks, designed to fit on shoulder-like or rounded area of your favorite m...

View full details
¥3,700 - ¥4,000
¥3,700 - ¥4,000
¥3,700 - ¥4,000
¥3,700
Prime Marine - Adjustable Arms (PM) 3d printed
Prime Marine - Adjustable Arms (PM) 3d printed

Prime Marine - Adjustable Arms (PM)

¥2,600 - ¥4,000
¥2,600 - ¥4,000
¥2,600 - ¥4,000
¥2,600

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms)Medium sprue = 10 Sets (20 tot...

View full details
¥2,600 - ¥4,000
¥2,600 - ¥4,000
¥2,600 - ¥4,000
¥2,600
Xenos Hunters: Redemptor Honor Kit 3d printed

Xenos Hunters: Redemptor Honor Kit

¥2,300 - ¥3,200
¥2,300 - ¥3,200
¥2,300 - ¥3,200
¥2,300

These bits are designed to fit the Primaris Redemptor dreadnought model. They're meant to give your standard kit a unique look and provide raised e...

View full details
¥2,300 - ¥3,200
¥2,300 - ¥3,200
¥2,300 - ¥3,200
¥2,300
Deathwatch Set 1 : Shoulder Insignia pack 3d printed

Deathwatch Set 1 : Shoulder Insignia pack

¥3,000 - ¥3,400
¥3,000 - ¥3,400
¥3,000 - ¥3,400
¥3,000

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥3,000 - ¥3,400
¥3,000 - ¥3,400
¥3,000 - ¥3,400
¥3,000
60x Kings Fist - Shoulder Insignia pack 3d printed
60x Kings Fist - Shoulder Insignia pack 3d printed

60x Kings Fist - Shoulder Insignia pack

¥3,500 - ¥4,100
¥3,500 - ¥4,100
¥3,500 - ¥4,100
¥3,500

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥3,500 - ¥4,100
¥3,500 - ¥4,100
¥3,500 - ¥4,100
¥3,500

Antonis : Arch Battleknight Conversion Kit

¥5,700 - ¥11,100
¥5,700 - ¥11,100
¥5,700 - ¥11,100
¥5,700

This conversion kit is designed to fit a standard GW Nemesis Dreadknight model kit. It is not a full model, just parts to add to your model kit to ...

View full details
¥5,700 - ¥11,100
¥5,700 - ¥11,100
¥5,700 - ¥11,100
¥5,700
60x Ultra Legion - Shoulder Insignia pack 3d printed
60x Ultra Legion - Shoulder Insignia pack 3d printed

60x Ultra Legion - Shoulder Insignia pack

¥3,500 - ¥4,100
¥3,500 - ¥4,100
¥3,500 - ¥4,100
¥3,500

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥3,500 - ¥4,100
¥3,500 - ¥4,100
¥3,500 - ¥4,100
¥3,500
10x Base - Crested G:10 Prime Helmets 3d printed
10x Base - Crested G:10 Prime Helmets 3d printed

10x Base - Crested G:11 Prime Helmets

¥2,800 - ¥2,800
¥2,800
¥2,800 - ¥2,800
¥2,800

The G:11 Prime Helmets were designed by the free-blade artist, Cornivius. It was inspired by the new Primaries models with a subtle ancient greek h...

View full details
¥2,800 - ¥2,800
¥2,800
¥2,800 - ¥2,800
¥2,800
Gen:3 Iron - Adjustable Arms 3d printed
Gen:3 Iron - Adjustable Arms 3d printed Small = 5 Sets / Medium = 10 Sets

Gen:3 Iron - Adjustable Arms

¥2,600 - ¥4,100
¥2,600 - ¥4,100
¥2,600 - ¥4,100
¥2,600

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms) Medium sprue = 10 Sets (20 to...

View full details
¥2,600 - ¥4,100
¥2,600 - ¥4,100
¥2,600 - ¥4,100
¥2,600
10x Deathwatch - T:1a Terminator Shoulders 3d printed
10x Deathwatch - T:1a Terminator Shoulders 3d printed

10x Xenos Hunters - T:1a Terminator Shoulders

¥3,200 - ¥3,300
¥3,200 - ¥3,300
¥3,200 - ¥3,300
¥3,200

The Terminator Series 1 style of shoulder pads are inspired to represent the Indomitus pattern Terminator armor (Standard). Sold unpainted, each pa...

View full details
¥3,200 - ¥3,300
¥3,200 - ¥3,300
¥3,200 - ¥3,300
¥3,200
View all Collection
View all Collection
Shop collection