Skip to content
Insignias Full Models Conv.Kits Marines Head Swaps Weapons Shields Vehicle Parts Walkers Apparel

Monkey Resin

Monkey Resin is a high-quality UV cured resin that will come attached to a support structure from the production process. The parts are however, pre-cleaned and ready for primer once removed. Use only super glue to adhere these parts to your models.

To remove the bits from their supports: submerge the whole assembly in water that is hot to the touch for 5 minutes. Use your fingernail to punch away several supports to create a starting point, and carefully peel your parts off of the remaining supports all together.

You can use a very fine-grit sandpaper if needed to smooth any surface or feature further. Always be sure to wear a mask when working around resin dust.

10x Wolf Legion - Blitzguard Veteran Kits

¥4,800 - ¥4,800
¥4,800
¥4,800 - ¥4,800
¥4,800

Blitzguard Veterans are an elite vanguard force that dominates the battlefield with a Power Claw on their right hand and a Power Shield in their le...

View full details
¥4,800 - ¥4,800
¥4,800
¥4,800 - ¥4,800
¥4,800

Shaggy Wolf : Full Rhinoback Impulsor Kit

¥4,800 - ¥4,800
¥4,800
¥4,800 - ¥4,800
¥4,800

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details
¥4,800 - ¥4,800
¥4,800
¥4,800 - ¥4,800
¥4,800

5x Wolf Legion - Blitzguard Veteran Kits

¥2,900 - ¥2,900
¥2,900
¥2,900 - ¥2,900
¥2,900

Blitzguard Veterans are an elite vanguard force that dominates the battlefield with a Power Claw on their right hand and a Power Shield in their le...

View full details
¥2,900 - ¥2,900
¥2,900
¥2,900 - ¥2,900
¥2,900
Shaggy Wolf : Phobos Twin Laser Turret (Conv.) 3d printed

Shaggy Wolf : Phobos Twin Laser Turret (MR)

¥2,100 - ¥4,500
¥2,100 - ¥4,500
¥2,100 - ¥4,500
¥2,100

  The Phobos Battle Tank is designed to represent a Deimos Pattern Predator with some notable exceptions. Unlike a standard resin kit, this product...

View full details
¥2,100 - ¥4,500
¥2,100 - ¥4,500
¥2,100 - ¥4,500
¥2,100
Shaggy Wolf: Impulsor Branding Kit 1 3d printed

Shaggy Wolf: Impulsor Branding Kit 1 (MR)

¥3,200 - ¥3,200
¥3,200
¥3,200 - ¥3,200
¥3,200

These components are designed to be able to fit the Primaris Impulsor kit to give your model a unique look. The front plate replaces the associated...

View full details
¥3,200 - ¥3,200
¥3,200
¥3,200 - ¥3,200
¥3,200
Shaggy Wolf : Impulsor Front Plate 1 3d printed

Shaggy Wolf : Impulsor Front Plate 1 (MR)

¥1,600 - ¥2,600
¥1,600 - ¥2,600
¥1,600 - ¥2,600
¥1,600

This component is designed to be able to fit the Primaris Impulsor kit to give your model a unique look. It replaces the associated part of the Imp...

View full details
¥1,600 - ¥2,600
¥1,600 - ¥2,600
¥1,600 - ¥2,600
¥1,600

Shaggy Wolf : Full Eternus Conv. Kit 2 (MR)

¥3,600 - ¥3,600
¥3,600
¥3,600 - ¥3,600
¥3,600

This conversation kit comes with a collection of armor pieces and extra bits that are designed to work with and fit onto your Eternus Assault Armor...

View full details
¥3,600 - ¥3,600
¥3,600
¥3,600 - ¥3,600
¥3,600

Shaggy Wolf : Full Eternus Conv. Kit 1 (MR)

¥3,600 - ¥3,600
¥3,600
¥3,600 - ¥3,600
¥3,600

This conversation kit comes with a collection of armor pieces and extra bits that are designed to work with and fit onto your Eternus Assault Armor...

View full details
¥3,600 - ¥3,600
¥3,600
¥3,600 - ¥3,600
¥3,600
Shaggy Wolf : Eternus Shin Set 2 3d printed

Shaggy Wolf : Eternus Shin Set 2 (MR)

¥1,800 - ¥1,800
¥1,800
¥1,800 - ¥1,800
¥1,800

These armor pieces and extra bits are designed to work with and fit onto your Eternus Assault Armor multipart kit*. These pieces will replace the c...

View full details
¥1,800 - ¥1,800
¥1,800
¥1,800 - ¥1,800
¥1,800
Shaggy Wolf : Eternus Shin Set 1 3d printed

Shaggy Wolf : Eternus Shin Set 1 (MR)

¥1,800 - ¥1,800
¥1,800
¥1,800 - ¥1,800
¥1,800

These armor pieces and extra bits are designed to work with and fit onto your Eternus Assault Armor multipart kit*. These pieces will replace the c...

View full details
¥1,800 - ¥1,800
¥1,800
¥1,800 - ¥1,800
¥1,800
Shaggy Wolf: Eternus Pauldron Set 1 3d printed

Shaggy Wolf: Eternus Pauldron Set 2 (MR)

¥2,100 - ¥2,100
¥2,100
¥2,100 - ¥2,100
¥2,100

These armor pieces and extra bits are designed to work with and fit onto your Eternus Assault Armor multipart kit*. These pieces will replace the c...

View full details
¥2,100 - ¥2,100
¥2,100
¥2,100 - ¥2,100
¥2,100
Shaggy Wolf : Eternus Pauldron Set 1 3d printed

Shaggy Wolf : Eternus Pauldron Set 1 (MR)

¥2,400 - ¥2,400
¥2,400
¥2,400 - ¥2,400
¥2,400

These armor pieces and extra bits are designed to work with and fit onto your Eternus Assault Armor multipart kit*. These pieces will replace the c...

View full details
¥2,400 - ¥2,400
¥2,400
¥2,400 - ¥2,400
¥2,400
Shaggy Wolf: Eternus Chestplate 1 3d printed

Shaggy Wolf: Eternus Chestplate 1 (MR)

¥1,800 - ¥1,800
¥1,800
¥1,800 - ¥1,800
¥1,800

These armor pieces and extra bits are designed to work with and fit onto your Eternus Assault Armor multipart kit*. These pieces will replace the c...

View full details
¥1,800 - ¥1,800
¥1,800
¥1,800 - ¥1,800
¥1,800

Featured collection

60x Maltese Cross : Shoulder Insignia pack 3d printed
60x Maltese Cross : Shoulder Insignia pack 3d printed

60x Maltese Cross : Shoulder Insignia pack

¥2,600 - ¥2,900
¥2,600 - ¥2,900
¥2,600 - ¥2,900
¥2,600

This insignia pack is designed to fit on any shoulder or rounded area of your favorite models. (YES, they fit the new marines) They are meant to pe...

View full details
¥2,600 - ¥2,900
¥2,600 - ¥2,900
¥2,600 - ¥2,900
¥2,600
4x10 Squad Making MultiPack 3d printed
4x10 Squad Making MultiPack 3d printed

4x10 Squad Making MultiPack

¥3,200 - ¥4,100
¥3,200 - ¥4,100
¥3,200 - ¥4,100
¥3,200

This pack contains 10 Tactical, 10 Assault, 10 Devestator, and 10 Comand marks, designed to fit on shoulder-like or rounded area of your favorite m...

View full details
¥3,200 - ¥4,100
¥3,200 - ¥4,100
¥3,200 - ¥4,100
¥3,200
Prime Marine - Adjustable Arms (PM) 3d printed
Prime Marine - Adjustable Arms (PM) 3d printed

Prime Marine - Adjustable Arms (PM)

¥2,500 - ¥4,300
¥2,500 - ¥4,300
¥2,500 - ¥4,300
¥2,500

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms)Medium sprue = 10 Sets (20 tot...

View full details
¥2,500 - ¥4,300
¥2,500 - ¥4,300
¥2,500 - ¥4,300
¥2,500
Arch Battleknight: Antonis 3d printed
Arch Battleknight: Antonis 3d printed

Arch Battleknight: Antonis

¥9,200 - ¥11,900
¥9,200 - ¥11,900
¥9,200 - ¥11,900
¥9,200

This conversion kit is designed to fit a standard GW Nemesis Dreadknight model kit. It is not a full model, just parts to add to your model kit to ...

View full details
¥9,200 - ¥11,900
¥9,200 - ¥11,900
¥9,200 - ¥11,900
¥9,200
60x Kings Fist - Shoulder Insignia pack 3d printed
60x Kings Fist - Shoulder Insignia pack 3d printed

60x Kings Fist - Shoulder Insignia pack

¥2,900 - ¥3,200
¥2,900 - ¥3,200
¥2,900 - ¥3,200
¥2,900

This insignia pack is designed to fit on any shoulder or rounded area of your favorite models. (YES, they fit the new marines) They are meant to pe...

View full details
¥2,900 - ¥3,200
¥2,900 - ¥3,200
¥2,900 - ¥3,200
¥2,900
Gen:4 Maximus - Adjustable Arms 3d printed
Gen:4 Maximus - Adjustable Arms 3d printed

Gen:4 Maximus - Adjustable Arms

¥2,500 - ¥4,300
¥2,500 - ¥4,300
¥2,500 - ¥4,300
¥2,500

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms)Medium sprue = 10 Sets (20 tot...

View full details
¥2,500 - ¥4,300
¥2,500 - ¥4,300
¥2,500 - ¥4,300
¥2,500
Gen:3 Iron - Adjustable Arms 3d printed
Gen:3 Iron - Adjustable Arms 3d printed Small = 5 Sets / Medium = 10 Sets

Gen:3 Iron - Adjustable Arms

¥2,500 - ¥4,400
¥2,500 - ¥4,400
¥2,500 - ¥4,400
¥2,500

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms) Medium sprue = 10 Sets (20 to...

View full details
¥2,500 - ¥4,400
¥2,500 - ¥4,400
¥2,500 - ¥4,400
¥2,500
60x Ultra Legion - Shoulder Insignia pack 3d printed
60x Ultra Legion - Shoulder Insignia pack 3d printed

60x Ultra Legion - Shoulder Insignia pack

¥2,700 - ¥2,900
¥2,700 - ¥2,900
¥2,700 - ¥2,900
¥2,700

This insignia pack is designed to fit on any shoulder or rounded area of your favorite models. (YES, they fit the new marines) They are meant to pe...

View full details
¥2,700 - ¥2,900
¥2,700 - ¥2,900
¥2,700 - ¥2,900
¥2,700
10x Base - Crested G:10 Prime Helmets 3d printed
10x Base - Crested G:10 Prime Helmets 3d printed

10x Base - Crested G:10 Prime Helmets

¥2,700 - ¥3,100
¥2,700 - ¥3,100
¥2,700 - ¥3,100
¥2,700

The G:10 Prime Helmets were designed by the free-blade artist, Cornivius. It was inspired by the new Primaries models with a subtle ancient greek h...

View full details
¥2,700 - ¥3,100
¥2,700 - ¥3,100
¥2,700 - ¥3,100
¥2,700
Deathwatch Set 1 : Shoulder Insignia pack 3d printed

Deathwatch Set 1 : Shoulder Insignia pack

¥3,200 - ¥3,500
¥3,200 - ¥3,500
¥3,200 - ¥3,500
¥3,200

This insignia pack is designed to fit on any shoulder or rounded area of your favorite models. (YES, they fit the new marines) They are meant to pe...

View full details
¥3,200 - ¥3,500
¥3,200 - ¥3,500
¥3,200 - ¥3,500
¥3,200
Xenos Hunters: Redemptor Honor Kit 3d printed
Xenos Hunters: Redemptor Honor Kit 3d printed

Xenos Hunters: Redemptor Honor Kit

¥2,800 - ¥3,400
¥2,800 - ¥3,400
¥2,800 - ¥3,400
¥2,800

These bits are designed to fit the Primaris Redemptor dreadnought model. They're meant to give your standard kit a unique look and provide raised e...

View full details
¥2,800 - ¥3,400
¥2,800 - ¥3,400
¥2,800 - ¥3,400
¥2,800
View all Collection
View all Collection
Shop collection