Skip to content
Insignias Full Models Conv.Kits Marines Head Swaps Weapons Shields Vehicle Parts Walkers

Monkey Resin 3

Monkey Resin 3 is a high-quality UV cured resin that will come attached to a support structure from the production process. The parts are however, pre-cleaned and ready for primer once removed. Use only super glue to adhere these parts to your models.

To remove the bits from their supports: submerge the whole assembly in water that is hot to the touch for 5 minutes. Use your fingernail to punch away several supports to create a starting point, and carefully peel your parts off of the remaining supports all together.

You can use a very fine-grit sandpaper if needed to smooth any surface or feature further. Always be sure to wear a mask when working around resin dust.

Xenos Hunters : Full Rhinoback Impulsor Kit 1

¥5,000 - ¥5,000
¥5,000
¥5,000 - ¥5,000
¥5,000

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details
¥5,000 - ¥5,000
¥5,000
¥5,000 - ¥5,000
¥5,000

Neptune Spears : Full Rhinoback Impulsor Kit

¥5,000 - ¥5,000
¥5,000
¥5,000 - ¥5,000
¥5,000

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details
¥5,000 - ¥5,000
¥5,000
¥5,000 - ¥5,000
¥5,000
Lamented Heart: Full Atlas Pattern Kit 2 3d printed
Lamented Heart: Full Atlas Pattern Kit 2 3d printed Save up to 50% Save %

Lamented Heart: Full Atlas Pattern Kit 2

¥8,000
¥8,000 - ¥8,900
¥8,000
¥4,000 - ¥8,900
¥4,000 - ¥8,900
¥4,000

The Atlas Pattern conversion parts can add just the right custom look to personalize the various Primaris Redemptor dreadnought model kits. This pa...

View full details
¥8,000
¥8,000 - ¥8,900
¥8,000
¥4,000 - ¥8,900
¥4,000 - ¥8,900
¥4,000
Save up to 50% Save %
Winged Horse: Full Atlas Pattern Kit 3d printed
Winged Horse: Full Atlas Pattern Kit 3d printed Save up to 51% Save %

Winged Horse: Full Atlas Pattern Kit

¥8,100
¥8,100 - ¥8,900
¥8,100
¥4,000 - ¥8,900
¥4,000 - ¥8,900
¥4,000

The Atlas Pattern conversion parts can add just the right custom look to personalize the various Primaris Redemptor dreadnought model kits. This pa...

View full details
¥8,100
¥8,100 - ¥8,900
¥8,100
¥4,000 - ¥8,900
¥4,000 - ¥8,900
¥4,000
Save up to 51% Save %
Tribal Lion: Full Atlas Pattern Kit (1) 3d printed
Tribal Lion: Full Atlas Pattern Kit (1) 3d printed
Save up to 51% Save %

Tribal Lion: Full Atlas Pattern Kit 1

¥8,100
¥8,100 - ¥8,900
¥8,100
¥4,000 - ¥8,900
¥4,000 - ¥8,900
¥4,000

The Atlas Pattern conversion parts can add just the right custom look to personalize the various Primaris Redemptor dreadnought model kits. This pa...

View full details
¥8,100
¥8,100 - ¥8,900
¥8,100
¥4,000 - ¥8,900
¥4,000 - ¥8,900
¥4,000
Save up to 51% Save %

Spartan : Arch Battleknight Conversion Kit

¥6,000 - ¥6,000
¥6,000
¥6,000 - ¥6,000
¥6,000

This conversion kit is designed to fit a standard GW Nemesis Dreadknight model kit. It is NOT a full model, just parts to add to your model kit to ...

View full details
¥6,000 - ¥6,000
¥6,000
¥6,000 - ¥6,000
¥6,000
Winged Sword : Full Eternus Conv. Kit 3d printed

Winged Sword - Eternus Armor Conv. Kit: 1

¥3,500 - ¥9,000
¥3,500 - ¥9,000
¥3,500 - ¥9,000
¥3,500

The Eternus Armor Conversation Kit features a complete set of armor pieces and extra parts designed to be used with a Naked: Eternus Armor-Ready ki...

View full details
¥3,500 - ¥9,000
¥3,500 - ¥9,000
¥3,500 - ¥9,000
¥3,500
Iron Heads : Legionary Demon Lord Kit 1 3d printed
Iron Heads : Legionary Demon Lord Kit 1 3d printed

Iron Heads : Legionary Demon Lord Kit 1

¥6,000 - ¥15,100
¥6,000 - ¥15,100
¥6,000 - ¥15,100
¥6,000

This kit includes a Full Demon Lord Kit (makes a complete Demon Lord). All these parts fit together to make an articulated, Demon Prince-scaled mod...

View full details
¥6,000 - ¥15,100
¥6,000 - ¥15,100
¥6,000 - ¥15,100
¥6,000
Mastodon: Full Redem Kit 3d printed
Mastodon: Full Redem Kit 3d printed Will fit the Primaris Redemptor model
Save up to 41% Save %

Mastodon: Full Redem Kit

¥6,800
¥6,800 - ¥8,900
¥6,800
¥4,000 - ¥8,900
¥4,000 - ¥8,900
¥4,000

Our Redem conversion parts can give the various Primaris Redemptor Dreadnought model kits a unique look. Personalize your model with these distinct...

View full details
¥6,800
¥6,800 - ¥8,900
¥6,800
¥4,000 - ¥8,900
¥4,000 - ¥8,900
¥4,000
Save up to 41% Save %
Lamented Heart: Full Atlas Pattern Kit 1 3d printed
Lamented Heart: Full Atlas Pattern Kit 1 3d printed
Save up to 49% Save %

Lamented Heart: Full Atlas Pattern Kit 1

¥7,900
¥7,900 - ¥8,900
¥7,900
¥4,000 - ¥8,900
¥4,000 - ¥8,900
¥4,000

The Atlas Pattern conversion parts can add just the right custom look to personalize the various Primaris Redemptor dreadnought model kits. This pa...

View full details
¥7,900
¥7,900 - ¥8,900
¥7,900
¥4,000 - ¥8,900
¥4,000 - ¥8,900
¥4,000
Save up to 49% Save %
Drake Guard: Full Atlas Pattern Kit 3d printed
Drake Guard: Full Atlas Pattern Kit 3d printed
Save up to 51% Save %

Drake Guard: Full Atlas Pattern Kit

¥8,100
¥8,100 - ¥8,900
¥8,100
¥4,000 - ¥8,900
¥4,000 - ¥8,900
¥4,000

The Atlas Pattern conversion parts can add just the right custom look to personalize the various Primaris Redemptor dreadnought model kits. This pa...

View full details
¥8,100
¥8,100 - ¥8,900
¥8,100
¥4,000 - ¥8,900
¥4,000 - ¥8,900
¥4,000
Save up to 51% Save %
Sorcerer Sun : Standard APC Conversion Kit 3d printed
Sorcerer Sun : Standard APC Conversion Kit 3d printed

Sorcerer Sun : Standard APC Conversion Kit

¥3,200 - ¥4,700
¥3,200 - ¥4,700
¥3,200 - ¥4,700
¥3,200

The Armored Personnel Carrier (APC) Conversion Kit features a custom front plate and doors designed to replace the corresponding parts of the stand...

View full details
¥3,200 - ¥4,700
¥3,200 - ¥4,700
¥3,200 - ¥4,700
¥3,200

Dragon Heads : Full Rhinoback Impala Kit 3

¥5,000 - ¥5,000
¥5,000
¥5,000 - ¥5,000
¥5,000

Our Rhinoback Impala is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your tr...

View full details
¥5,000 - ¥5,000
¥5,000
¥5,000 - ¥5,000
¥5,000
Hydra Legion: Full Eternus Conv. Kit 1 3d printed

Hydra Legion - Eternus Armor Conv. Kit: 1

¥3,400 - ¥8,600
¥3,400 - ¥8,600
¥3,400 - ¥8,600
¥3,400

The Eternus Armor Conversation Kit features a complete set of armor pieces and extra parts designed to be used with a Naked: Eternus Armor-Ready ki...

View full details
¥3,400 - ¥8,600
¥3,400 - ¥8,600
¥3,400 - ¥8,600
¥3,400
Sons of Medusa : Full Mech-Redemptor Kit 3d printed
Save up to 44% Save %

Sons of Medusa : Duff Pattern Redemptor Kit

¥8,500
¥8,500 - ¥11,800
¥8,500
¥4,800 - ¥11,800
¥4,800 - ¥11,800
¥4,800

The Duff Pattern bits are designed to fit the Primaris Redemptor dreadnought model kit but, comes with extra parts. You get 2 posable missile launc...

View full details
¥8,500
¥8,500 - ¥11,800
¥8,500
¥4,800 - ¥11,800
¥4,800 - ¥11,800
¥4,800
Save up to 44% Save %
Mori Tempus: Full Atlas Pattern Kit 3d printed
Save up to 51% Save %

Mori Tempus: Full Atlas Pattern Kit

¥8,100
¥8,100 - ¥8,900
¥8,100
¥4,000 - ¥8,900
¥4,000 - ¥8,900
¥4,000

The Atlas Pattern conversion parts can add just the right custom look to personalize the various Primaris Redemptor dreadnought model kits. This pa...

View full details
¥8,100
¥8,100 - ¥8,900
¥8,100
¥4,000 - ¥8,900
¥4,000 - ¥8,900
¥4,000
Save up to 51% Save %
Tribal Lion: Full Atlas Pattern Kit (2) 3d printed
Tribal Lion: Full Atlas Pattern Kit (2) 3d printed
Save up to 51% Save %

Tribal Lion: Full Atlas Pattern Kit 2

¥8,100
¥8,100 - ¥8,900
¥8,100
¥4,000 - ¥8,900
¥4,000 - ¥8,900
¥4,000

The Atlas Pattern conversion parts can add just the right custom look to personalize the various Primaris Redemptor dreadnought model kits. This pa...

View full details
¥8,100
¥8,100 - ¥8,900
¥8,100
¥4,000 - ¥8,900
¥4,000 - ¥8,900
¥4,000
Save up to 51% Save %
Iron heads: Full Eternus Conv. Kit 3 3d printed

Iron heads - Eternus Armor Conv. Kit: 3

¥3,400 - ¥8,600
¥3,400 - ¥8,600
¥3,400 - ¥8,600
¥3,400

The Eternus Armor Conversation Kit features a complete set of armor pieces and extra parts designed to be used with a Naked: Eternus Armor-Ready ki...

View full details
¥3,400 - ¥8,600
¥3,400 - ¥8,600
¥3,400 - ¥8,600
¥3,400
Griffon Corp: Full Redem Kit 3d printed
Griffon Corp: Full Redem Kit 3d printed Will fit the Primaris Redemptor model
Save up to 44% Save %

Griffon Corp: Full Redem Kit

¥7,200
¥7,200 - ¥8,900
¥7,200
¥4,000 - ¥8,900
¥4,000 - ¥8,900
¥4,000

Our Redem conversion parts can give the various Primaris Redemptor Dreadnought model kits a unique look. Personalize your model with these distinct...

View full details
¥7,200
¥7,200 - ¥8,900
¥7,200
¥4,000 - ¥8,900
¥4,000 - ¥8,900
¥4,000
Save up to 44% Save %
Executioners: Full Atlas Pattern Kit 3d printed
Executioners: Full Atlas Pattern Kit 3d printed
Save up to 49% Save %

Executioners: Full Atlas Pattern Kit

¥7,800
¥7,800 - ¥8,900
¥7,800
¥4,000 - ¥8,900
¥4,000 - ¥8,900
¥4,000

The Atlas Pattern conversion parts can add just the right custom look to personalize the various Primaris Redemptor dreadnought model kits. This pa...

View full details
¥7,800
¥7,800 - ¥8,900
¥7,800
¥4,000 - ¥8,900
¥4,000 - ¥8,900
¥4,000
Save up to 49% Save %
Celestial Lions: Full Atlas Pattern Kit (2) 3d printed
Celestial Lions: Full Atlas Pattern Kit (2) 3d printed
Save up to 51% Save %

Celestial Lions: Full Atlas Pattern Kit 2

¥8,100
¥8,100 - ¥8,900
¥8,100
¥4,000 - ¥8,900
¥4,000 - ¥8,900
¥4,000

The Atlas Pattern conversion parts can add just the right custom look to personalize the various Primaris Redemptor dreadnought model kits. This pa...

View full details
¥8,100
¥8,100 - ¥8,900
¥8,100
¥4,000 - ¥8,900
¥4,000 - ¥8,900
¥4,000
Save up to 51% Save %
Corrupted Purge : Neo-1 APC Conversion Kit 3d printed
Corrupted Purge : Neo-1 APC Conversion Kit 3d printed

Corrupted Purge : Neo-1 APC Conversion Kit

¥4,400 - ¥6,500
¥4,400 - ¥6,500
¥4,400 - ¥6,500
¥4,400

The Armored Personnel Carrier (APC) Conversion Kit features a custom front plate and doors designed to replace the corresponding parts of the stand...

View full details
¥4,400 - ¥6,500
¥4,400 - ¥6,500
¥4,400 - ¥6,500
¥4,400
Angel Tears : Mark-1 APC Conversion Kit 3d printed

Angel Tears : Mark-1 APC Conversion Kit

¥4,200 - ¥6,200
¥4,200 - ¥6,200
¥4,200 - ¥6,200
¥4,200

The Armored Personnel Carrier (APC) Conversion Kit features a custom front plate and doors designed to replace the corresponding parts of the stand...

View full details
¥4,200 - ¥6,200
¥4,200 - ¥6,200
¥4,200 - ¥6,200
¥4,200

Talon Wing : Standard APC Conversion Kit

¥3,400 - ¥3,400
¥3,400
¥3,400 - ¥3,400
¥3,400

The Armored Personnel Carrier (APC) Conversion Kit features a custom front plate and doors designed to replace the corresponding parts of the stand...

View full details
¥3,400 - ¥3,400
¥3,400
¥3,400 - ¥3,400
¥3,400

Naked : Eternus Armor-Ready kit

¥7,500 - ¥7,500
¥7,500
¥7,500 - ¥7,500
¥7,500

This NAKED: Eternus Armor-Ready Kit does NOT make a complete Eternus Assault Armor model, but it does have all the core parts needed, besides the a...

View full details
¥7,500 - ¥7,500
¥7,500
¥7,500 - ¥7,500
¥7,500

Dragon Heads : Full Rhinoback Impala Kit 4

¥5,000 - ¥5,000
¥5,000
¥5,000 - ¥5,000
¥5,000

Our Rhinoback Impala is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your tr...

View full details
¥5,000 - ¥5,000
¥5,000
¥5,000 - ¥5,000
¥5,000

Samurai : Arch Battleknight Conversion Kit

¥6,000 - ¥6,000
¥6,000
¥6,000 - ¥6,000
¥6,000

This conversion kit is designed to fit a standard GW Nemesis Dreadknight model kit. It is NOT a full model, just parts to add to your model kit to ...

View full details
¥6,000 - ¥6,000
¥6,000
¥6,000 - ¥6,000
¥6,000

Iron heads - Eternus Armor Conv. Kit: 1

¥3,400 - ¥8,500
¥3,400 - ¥8,500
¥3,400 - ¥8,500
¥3,400

The Eternus Armor Conversation Kit features a complete set of armor pieces and extra parts designed to be used with a Naked: Eternus Armor-Ready ki...

View full details
¥3,400 - ¥8,500
¥3,400 - ¥8,500
¥3,400 - ¥8,500
¥3,400
Sons of Isaac : Full Atlas Pattern Kit 3d printed
Save up to 51% Save %

Sons of Isaac : Full Atlas Pattern Kit

¥8,100
¥8,100 - ¥8,900
¥8,100
¥4,000 - ¥8,900
¥4,000 - ¥8,900
¥4,000

The Atlas Pattern conversion parts can add just the right custom look to personalize the various Primaris Redemptor dreadnought model kits. This pa...

View full details
¥8,100
¥8,100 - ¥8,900
¥8,100
¥4,000 - ¥8,900
¥4,000 - ¥8,900
¥4,000
Save up to 51% Save %
Orc Giga Dread : Cyorc (Full Kit) 3d printed
Save up to 60% Save %

Orc Giga Dread : Cyorc (Full Kit)

¥13,300
¥13,300 - ¥16,000
¥13,300
¥5,300 - ¥16,000
¥5,300 - ¥16,000
¥5,300

The Orc Giga Dread Kit is designed to fit the Primaris Redemptor dreadnought model kit. It’s meant to convert your standard kit into a Looted Ork w...

View full details
¥13,300
¥13,300 - ¥16,000
¥13,300
¥5,300 - ¥16,000
¥5,300 - ¥16,000
¥5,300
Save up to 60% Save %
Sons of the Hunt : Full Atlas Pattern Kit 3d printed
Sons of the Hunt : Full Atlas Pattern Kit 3d printed
Save up to 51% Save %

Sons of the Hunt : Full Atlas Pattern Kit 1

¥8,100
¥8,100 - ¥8,900
¥8,100
¥4,000 - ¥8,900
¥4,000 - ¥8,900
¥4,000

The Atlas Pattern conversion parts can add just the right custom look to personalize the various Primaris Redemptor dreadnought model kits. This pa...

View full details
¥8,100
¥8,100 - ¥8,900
¥8,100
¥4,000 - ¥8,900
¥4,000 - ¥8,900
¥4,000
Save up to 51% Save %
Iron Heads : Legionary Demon Lord Kit 2 3d printed
Iron Heads : Legionary Demon Lord Kit 2 3d printed

Iron Heads : Legionary Demon Lord Kit 2

¥5,800 - ¥13,400
¥5,800 - ¥13,400
¥5,800 - ¥13,400
¥5,800

This kit includes a Full Demon Lord Kit (makes a complete Demon Lord). All these parts fit together to make an articulated, Demon Prince-scaled mod...

View full details
¥5,800 - ¥13,400
¥5,800 - ¥13,400
¥5,800 - ¥13,400
¥5,800

Eternus Weapon Arm Adapter: Contempor Models

¥2,500 - ¥4,400
¥2,500 - ¥4,400
¥2,500 - ¥4,400
¥2,500

This kit features shoulder joint adaptors that can fit either the current plastic Contemptor Haul or Classic Forge World options*. However, this ki...

View full details
¥2,500 - ¥4,400
¥2,500 - ¥4,400
¥2,500 - ¥4,400
¥2,500
Hydra Legion : Full Eternus Conv. Kit 2 3d printed

Hydra Legion - Eternus Armor Conv. Kit: 2

¥3,400 - ¥8,700
¥3,400 - ¥8,700
¥3,400 - ¥8,700
¥3,400

The Eternus Armor Conversation Kit features a complete set of armor pieces and extra parts designed to be used with a Naked: Eternus Armor-Ready ki...

View full details
¥3,400 - ¥8,700
¥3,400 - ¥8,700
¥3,400 - ¥8,700
¥3,400
Winter Revenants: Full Atlas Pattern Kit 3d printed
Winter Revenants: Full Atlas Pattern Kit 3d printed
Save up to 51% Save %

Winter Revenants: Full Atlas Pattern Kit

¥8,100
¥8,100 - ¥8,900
¥8,100
¥4,000 - ¥8,900
¥4,000 - ¥8,900
¥4,000

The Atlas Pattern conversion parts can add just the right custom look to personalize the various Primaris Redemptor dreadnought model kits. This pa...

View full details
¥8,100
¥8,100 - ¥8,900
¥8,100
¥4,000 - ¥8,900
¥4,000 - ¥8,900
¥4,000
Save up to 51% Save %
Nighhtmare : Legionary Demon Lord Kit 2 3d printed
Nighhtmare : Legionary Demon Lord Kit 2 3d printed

Nightmare : Legionary Demon Lord Kit 2

¥5,800 - ¥14,900
¥5,800 - ¥14,900
¥5,800 - ¥14,900
¥5,800

This kit includes a Full Demon Lord Kit (makes a complete Demon Lord). All these parts fit together to make an articulated, Demon Prince-scaled mod...

View full details
¥5,800 - ¥14,900
¥5,800 - ¥14,900
¥5,800 - ¥14,900
¥5,800

Phoenician Wing : Standard APC Conv. Kit

¥3,400 - ¥3,400
¥3,400
¥3,400 - ¥3,400
¥3,400

The Armored Personnel Carrier (APC) Conversion Kit features a custom front plate and doors designed to replace the corresponding parts of the stand...

View full details
¥3,400 - ¥3,400
¥3,400
¥3,400 - ¥3,400
¥3,400

Brewguzzla's Buccaneers : Kill Team Kit

¥5,500 - ¥5,500
¥5,500
¥5,500 - ¥5,500
¥5,500

The salty crew of Kaptin Gorgrok Brewguzzla (known as ‘Ol Scrapbeard by his lads) are always in the mood to nick some flashy loot and run a uman th...

View full details
¥5,500 - ¥5,500
¥5,500
¥5,500 - ¥5,500
¥5,500

Iron Wolf - Wolf Conversion Kit

¥9,600 - ¥9,600
¥9,600
¥9,600 - ¥9,600
¥9,600

The Iron Wolf Conversion Kit is a comprehensive bundle of components specifically for Questor Class Knights, which include:- Iron Wolf Head- Iron ...

View full details
¥9,600 - ¥9,600
¥9,600
¥9,600 - ¥9,600
¥9,600

Sun Scarabs - Eternus Armor Conv. Kit: 2

¥3,500 - ¥8,700
¥3,500 - ¥8,700
¥3,500 - ¥8,700
¥3,500

The Eternus Armor Conversation Kit features a complete set of armor pieces and extra parts designed to be used with a Naked: Eternus Armor-Ready ki...

View full details
¥3,500 - ¥8,700
¥3,500 - ¥8,700
¥3,500 - ¥8,700
¥3,500
World Wreckers: Full Eternus Conv. Kit 3d printed

World Wreckers - Eternus Armor Conv. Kit: 1

¥3,500 - ¥9,800
¥3,500 - ¥9,800
¥3,500 - ¥9,800
¥3,500

The Eternus Armor Conversation Kit features a complete set of armor pieces and extra parts designed to be used with a Naked: Eternus Armor-Ready ki...

View full details
¥3,500 - ¥9,800
¥3,500 - ¥9,800
¥3,500 - ¥9,800
¥3,500

Winged Sword - Eternus Armor Conv. Kit: 2

¥3,500 - ¥9,300
¥3,500 - ¥9,300
¥3,500 - ¥9,300
¥3,500

The Eternus Armor Conversation Kit features a complete set of armor pieces and extra parts designed to be used with a Naked: Eternus Armor-Ready ki...

View full details
¥3,500 - ¥9,300
¥3,500 - ¥9,300
¥3,500 - ¥9,300
¥3,500
Shaggy Wolf : Full Eternus Conv. Kit 2 3d printed

Shaggy Wolf - Eternus Armor Conv. Kit: 2

¥3,400 - ¥8,700
¥3,400 - ¥8,700
¥3,400 - ¥8,700
¥3,400

The Eternus Armor Conversation Kit features a complete set of armor pieces and extra parts designed to be used with a Naked: Eternus Armor-Ready ki...

View full details
¥3,400 - ¥8,700
¥3,400 - ¥8,700
¥3,400 - ¥8,700
¥3,400
Shaggy Wolf : Full Eternus Conv. Kit 1 3d printed

Shaggy Wolf - Eternus Armor Conv. Kit: 1

¥3,400 - ¥9,800
¥3,400 - ¥9,800
¥3,400 - ¥9,800
¥3,400

The Eternus Armor Conversation Kit features a complete set of armor pieces and extra parts designed to be used with a Naked: Eternus Armor-Ready ki...

View full details
¥3,400 - ¥9,800
¥3,400 - ¥9,800
¥3,400 - ¥9,800
¥3,400
Wolf Rampant : Full Eternus Conv. Kit 1 3d printed

Wolf Rampant - Eternus Armor Conv. Kit: 1

¥3,400 - ¥9,900
¥3,400 - ¥9,900
¥3,400 - ¥9,900
¥3,400

The Eternus Armor Conversation Kit features a complete set of armor pieces and extra parts designed to be used with a Naked: Eternus Armor-Ready ki...

View full details
¥3,400 - ¥9,900
¥3,400 - ¥9,900
¥3,400 - ¥9,900
¥3,400
Storm Fists : Full Redem Kit 3d printed
Storm Fists : Full Redem Kit 3d printed
Save up to 42% Save %

Storm Fists : Full Redem Kit

¥6,900
¥6,900 - ¥8,900
¥6,900
¥4,000 - ¥8,900
¥4,000 - ¥8,900
¥4,000

Our Redem conversion parts can give the various Primaris Redemptor Dreadnought model kits a unique look. Personalize your model with these distinct...

View full details
¥6,900
¥6,900 - ¥8,900
¥6,900
¥4,000 - ¥8,900
¥4,000 - ¥8,900
¥4,000
Save up to 42% Save %

Alpha Omega : Voidscale APC Conversion Kit

¥3,300 - ¥3,300
¥3,300
¥3,300 - ¥3,300
¥3,300

The Armored Personnel Carrier (APC) Conversion Kit features a custom front plate and doors designed to replace the corresponding parts of the stand...

View full details
¥3,300 - ¥3,300
¥3,300
¥3,300 - ¥3,300
¥3,300
Corrupted Purge : Mark-1 APC Conversion Kit 3d printed
Corrupted Purge : Mark-1 APC Conversion Kit 3d printed

Corrupted Purge : Mark-1 APC Conversion Kit

¥4,400 - ¥6,200
¥4,400 - ¥6,200
¥4,400 - ¥6,200
¥4,400

The Armored Personnel Carrier (APC) Conversion Kit features a custom front plate and doors designed to replace the corresponding parts of the stand...

View full details
¥4,400 - ¥6,200
¥4,400 - ¥6,200
¥4,400 - ¥6,200
¥4,400

Featured collection

60x Maltese Cross : Shoulder Insignia pack 3d printed
60x Maltese Cross : Shoulder Insignia pack 3d printed

60x Maltese Cross : Shoulder Insignia pack

¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200
4x10 Squad Making MultiPack 3d printed
4x10 Squad Making MultiPack 3d printed

4x10 Squad Making MultiPack

¥3,900 - ¥4,200
¥3,900 - ¥4,200
¥3,900 - ¥4,200
¥3,900

This pack contains 10 Tactical, 10 Assault, 10 Devestator, and 10 Comand marks, designed to fit on shoulder-like or rounded area of your favorite m...

View full details
¥3,900 - ¥4,200
¥3,900 - ¥4,200
¥3,900 - ¥4,200
¥3,900
Xenos Hunters: Redemptor Honor Kit 3d printed

Xenos Hunters: Redemptor Honor Kit

¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400

These bits are designed to fit the Primaris Redemptor dreadnought model. They're meant to give your standard kit a unique look and provide raised e...

View full details
¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400
Prime Marine - Adjustable Arms (PM) 3d printed
Prime Marine - Adjustable Arms (PM) 3d printed

Prime Marine - Adjustable Arms (PM)

¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms)Medium sprue = 10 Sets (20 tot...

View full details
¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800
Deathwatch Set 1 : Shoulder Insignia pack 3d printed

Deathwatch Set 1 : Shoulder Insignia pack

¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200
60x Kings Fist - Shoulder Insignia pack 3d printed
60x Kings Fist - Shoulder Insignia pack 3d printed

60x Kings Fist - Shoulder Insignia pack

¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200

Antonis : Arch Battleknight Conversion Kit

¥6,000 - ¥11,500
¥6,000 - ¥11,500
¥6,000 - ¥11,500
¥6,000

This conversion kit is designed to fit a standard GW Nemesis Dreadknight model kit. It is not a full model, just parts to add to your model kit to ...

View full details
¥6,000 - ¥11,500
¥6,000 - ¥11,500
¥6,000 - ¥11,500
¥6,000
10x Base - Crested G:10 Prime Helmets 3d printed
10x Base - Crested G:10 Prime Helmets 3d printed

10x Base - Crested G:11 Prime Helmets

¥3,000 - ¥3,000
¥3,000
¥3,000 - ¥3,000
¥3,000

The G:11 Prime Helmets were designed by the free-blade artist, Cornivius. It was inspired by the new Primaries models with a subtle ancient greek h...

View full details
¥3,000 - ¥3,000
¥3,000
¥3,000 - ¥3,000
¥3,000
60x Ultra Legion - Shoulder Insignia pack 3d printed
60x Ultra Legion - Shoulder Insignia pack 3d printed

60x Ultra Legion - Shoulder Insignia pack

¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200
Gen:3 Iron - Adjustable Arms 3d printed
Gen:3 Iron - Adjustable Arms 3d printed Small = 5 Sets / Medium = 10 Sets

Gen:3 Iron - Adjustable Arms

¥2,800 - ¥4,300
¥2,800 - ¥4,300
¥2,800 - ¥4,300
¥2,800

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms) Medium sprue = 10 Sets (20 to...

View full details
¥2,800 - ¥4,300
¥2,800 - ¥4,300
¥2,800 - ¥4,300
¥2,800
Deathwatch Set 2 : Shoulder Insignia pack 3d printed
Deathwatch Set 2 : Shoulder Insignia pack 3d printed

Deathwatch Set 2 : Shoulder Insignia pack

¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200

This insignia pack is designed to fit on any shoulder or rounded area of your favorite models. (YES, they fit the new marines) They are meant to pe...

View full details
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200
View all Collection
View all Collection
Shop collection