Skip to content
Insignias Full Models Conv.Kits Marines Head Swaps Weapons Shields Vehicle Parts Walkers Apparel

Monkey Resin 3

Monkey Resin 3 is a high-quality UV cured resin that will come attached to a support structure from the production process. The parts are however, pre-cleaned and ready for primer once removed. Use only super glue to adhere these parts to your models.

To remove the bits from their supports: submerge the whole assembly in water that is hot to the touch for 5 minutes. Use your fingernail to punch away several supports to create a starting point, and carefully peel your parts off of the remaining supports all together.

You can use a very fine-grit sandpaper if needed to smooth any surface or feature further. Always be sure to wear a mask when working around resin dust.

Epic-Scale : Mk2D Scorpio Rocket Launcher

¥3,000 - ¥6,100
¥3,000 - ¥6,100
¥3,000 - ¥6,100
¥3,000

These vehicles are compatible with any 6mm Scale games such as Adeptus Titanicus or Epic 40k. This vehicle is roughly: 30mm Long x 20mm Wide x 15mm...

View full details
¥3,000 - ¥6,100
¥3,000 - ¥6,100
¥3,000 - ¥6,100
¥3,000

Epic-Scale : Mk2 Armored Personnel Carrier

¥2,800 - ¥5,600
¥2,800 - ¥5,600
¥2,800 - ¥5,600
¥2,800

These vehicles are compatible with any 6-8mm Scale games such as Epic 40k or Legions Imperialis. This vehicle is roughly: 30mm Long x 20mm Wide x 1...

View full details
¥2,800 - ¥5,600
¥2,800 - ¥5,600
¥2,800 - ¥5,600
¥2,800

3x Boss Hawg Bikers

¥11,200 - ¥11,200
¥11,200
¥11,200 - ¥11,200
¥11,200

These are Leaders of the Pack! This set includes 3 Full model bikers that is larger than a standard Orc war bike. Bigger is alway better, right? Ea...

View full details
¥11,200 - ¥11,200
¥11,200
¥11,200 - ¥11,200
¥11,200

Boss Hawg Biker : EeZee Ridda'

¥4,800 - ¥4,800
¥4,800
¥4,800 - ¥4,800
¥4,800

Are you looking for a larger boss for your war bike mob? Then this kit is for you. This is a Full model kit that is larger than a standard Orc war ...

View full details
¥4,800 - ¥4,800
¥4,800
¥4,800 - ¥4,800
¥4,800

Boss Hawg Biker : Trike Choppa

¥4,800 - ¥4,800
¥4,800
¥4,800 - ¥4,800
¥4,800

Are you looking for a larger boss for your war bike mob? Then this kit is for you. This is a Full model kit that is larger than a standard Orc war ...

View full details
¥4,800 - ¥4,800
¥4,800
¥4,800 - ¥4,800
¥4,800

Boss Hawg Biker : Arhlee Dreader'Sun

¥4,800 - ¥4,800
¥4,800
¥4,800 - ¥4,800
¥4,800

Are you looking for a larger boss for your war bike mob? Then this kit is for you. This is a Full model kit that is larger than a standard Orc war ...

View full details
¥4,800 - ¥4,800
¥4,800
¥4,800 - ¥4,800
¥4,800

Sanguine Legion : Eternus Assault Armor kit

¥11,900 - ¥11,900
¥11,900
¥11,900 - ¥11,900
¥11,900

The Eternus Assault Armor is a Multipart, Magnet-Ready kit designed for flex-ability and customization. Fully assembled it stands 7cm tall (about 3...

View full details
¥11,900 - ¥11,900
¥11,900
¥11,900 - ¥11,900
¥11,900

Emperors Third : Eternus Assault Armor kit

¥11,900 - ¥11,900
¥11,900
¥11,900 - ¥11,900
¥11,900

The Eternus Assault Armor is a Multipart, Magnet-Ready kit designed for flex-ability and customization. Fully assembled it stands 7cm tall (about 3...

View full details
¥11,900 - ¥11,900
¥11,900
¥11,900 - ¥11,900
¥11,900

Sun Scarabs : Eternus Assault Armor kit

¥11,100 - ¥11,100
¥11,100
¥11,100 - ¥11,100
¥11,100

The Eternus Assault Armor is a Multipart, Magnet-Ready kit designed for flex-ability and customization. Fully assembled it stands 7cm tall (about 3...

View full details
¥11,100 - ¥11,100
¥11,100
¥11,100 - ¥11,100
¥11,100

Scarab Sons : Eternus Assault Armor kit

¥11,100 - ¥11,100
¥11,100
¥11,100 - ¥11,100
¥11,100

The Eternus Assault Armor is a Multipart, Magnet-Ready kit designed for flex-ability and customization. Fully assembled it stands 7cm tall (about 3...

View full details
¥11,100 - ¥11,100
¥11,100
¥11,100 - ¥11,100
¥11,100

Alpha Omega : Eternus Assault Armor kit

¥11,100 - ¥11,100
¥11,100
¥11,100 - ¥11,100
¥11,100

The Eternus Assault Armor is a Multipart, Magnet-Ready kit designed for flex-ability and customization. Fully assembled it stands 7cm tall (about 3...

View full details
¥11,100 - ¥11,100
¥11,100
¥11,100 - ¥11,100
¥11,100

Iron Legion : Eternus Assault Armor kit

¥11,100 - ¥11,100
¥11,100
¥11,100 - ¥11,100
¥11,100

The Eternus Assault Armor is a Multipart, Magnet-Ready kit designed for flex-ability and customization. Fully assembled it stands 7cm tall (about 3...

View full details
¥11,100 - ¥11,100
¥11,100
¥11,100 - ¥11,100
¥11,100

Iron Heads : Eternus Assault Armor kit

¥11,100 - ¥11,100
¥11,100
¥11,100 - ¥11,100
¥11,100

The Eternus Assault Armor is a Multipart, Magnet-Ready kit designed for flex-ability and customization. Fully assembled it stands 7cm tall (about 3...

View full details
¥11,100 - ¥11,100
¥11,100
¥11,100 - ¥11,100
¥11,100

Wolf Legion : Eternus Assault Armor kit

¥11,100 - ¥11,100
¥11,100
¥11,100 - ¥11,100
¥11,100

The Eternus Assault Armor is a Multipart, Magnet-Ready kit designed for flex-ability and customization. Fully assembled it stands 7cm tall (about 3...

View full details
¥11,100 - ¥11,100
¥11,100
¥11,100 - ¥11,100
¥11,100

Shaggy Wolf : Eternus Assault Armor kit

¥11,100 - ¥11,100
¥11,100
¥11,100 - ¥11,100
¥11,100

The Eternus Assault Armor is a Multipart, Magnet-Ready kit designed for flex-ability and customization. Fully assembled it stands 7cm tall (about 3...

View full details
¥11,100 - ¥11,100
¥11,100
¥11,100 - ¥11,100
¥11,100

Angel Sword : Eternus Assault Armor kit

¥11,100 - ¥11,100
¥11,100
¥11,100 - ¥11,100
¥11,100

The Eternus Assault Armor is a Multipart, Magnet-Ready kit designed for flex-ability and customization. Fully assembled it stands 7cm tall (about 3...

View full details
¥11,100 - ¥11,100
¥11,100
¥11,100 - ¥11,100
¥11,100

Winged Sword : Eternus Assault Armor kit

¥11,100 - ¥11,100
¥11,100
¥11,100 - ¥11,100
¥11,100

The Eternus Assault Armor is a Multipart, Magnet-Ready kit designed for flex-ability and customization. Fully assembled it stands 7cm tall (about 3...

View full details
¥11,100 - ¥11,100
¥11,100
¥11,100 - ¥11,100
¥11,100

World Wrecker : Eternus Assault Armor kit

¥11,100 - ¥11,100
¥11,100
¥11,100 - ¥11,100
¥11,100

The Eternus Assault Armor is a Multipart, Magnet-Ready kit designed for flex-ability and customization. Fully assembled it stands 7cm tall (about 3...

View full details
¥11,100 - ¥11,100
¥11,100
¥11,100 - ¥11,100
¥11,100

HP-24 Commander Mech (Magnet-Ready)

¥8,000 - ¥8,000
¥8,000
¥8,000 - ¥8,000
¥8,000

The HP-24 Commander Mech is a full-model kit designed as a custom alternative to your basic T'au Empire Commander model kit. The kit includes 28 pi...

View full details
¥8,000 - ¥8,000
¥8,000
¥8,000 - ¥8,000
¥8,000

1x Triaxe-Pattern Hover Drone

¥4,800 - ¥12,200
¥4,800 - ¥12,200
¥4,800 - ¥12,200
¥4,800

The Triaxe-Pattern Hover Drone is designed to create a unique additional model and give armies an enhanced look to help them stand out on the table...

View full details
¥4,800 - ¥12,200
¥4,800 - ¥12,200
¥4,800 - ¥12,200
¥4,800

5x Saturnus Terminator Mk:3 Defender Squad

¥7,000 - ¥7,000
¥7,000
¥7,000 - ¥7,000
¥7,000

The Mk3 Saturnus-Pattern Terminator Armor was designed to harken back to the Darker Age of the Galactic Empire. Don't be fooled, they might look vi...

View full details
¥7,000 - ¥7,000
¥7,000
¥7,000 - ¥7,000
¥7,000

5x Saturnus Terminator Mk:2 Defender Squad

¥6,200 - ¥6,200
¥6,200
¥6,200 - ¥6,200
¥6,200

The Mk1 Saturnus-Pattern Terminator Armor was designed to harken back to the Darker Age of the Galactic Empire. Don't be fooled, they might look vi...

View full details
¥6,200 - ¥6,200
¥6,200
¥6,200 - ¥6,200
¥6,200

5x Saturnus Terminator Mk:1 Defender Squad

¥6,200 - ¥6,200
¥6,200
¥6,200 - ¥6,200
¥6,200

The Mk1 Saturnus-Pattern Terminator Armor was designed to harken back to the Darker Age of the Galactic Empire. Don't be fooled, they might look vi...

View full details
¥6,200 - ¥6,200
¥6,200
¥6,200 - ¥6,200
¥6,200
Mag-Swap T-24 Drones 3d printed

Mag-Swap T-24 Drones

¥1,800 - ¥6,700
¥1,800 - ¥6,700
¥1,800 - ¥6,700
¥1,800

MAG-Swap Drones allow you to easily change the load-out of your Tau Federation Drones by the use of a few 2.5mm x 1mm disc magnets. The hover-deck ...

View full details
¥1,800 - ¥6,700
¥1,800 - ¥6,700
¥1,800 - ¥6,700
¥1,800

Arch Battleknight: Daimyo

¥11,200 - ¥11,200
¥11,200
¥11,200 - ¥11,200
¥11,200

This FULL MODEL KIT does NOT need any other model to construct. All the parts you need (and more) are in this set. It can be assembled in a wide ra...

View full details
¥11,200 - ¥11,200
¥11,200
¥11,200 - ¥11,200
¥11,200

Arch Battleknight: Samurai

¥13,000 - ¥13,000
¥13,000
¥13,000 - ¥13,000
¥13,000

This FULL MODEL KIT does NOT need any other model to construct. All the parts you need (and more) are in this set. It can be assembled in a wide ra...

View full details
¥13,000 - ¥13,000
¥13,000
¥13,000 - ¥13,000
¥13,000

Arch Battleknight: Myrmidon

¥13,200 - ¥13,200
¥13,200
¥13,200 - ¥13,200
¥13,200

This FULL MODEL KIT does NOT need any other model to construct. All the parts you need (and more) are in this set. It can be assembled in a wide ra...

View full details
¥13,200 - ¥13,200
¥13,200
¥13,200 - ¥13,200
¥13,200

Arch Battleknight: Spartan

¥11,000 - ¥11,000
¥11,000
¥11,000 - ¥11,000
¥11,000

This FULL MODEL KIT does NOT need any other model to construct. All the parts you need (and more) are in this set. It can be assembled in a wide ra...

View full details
¥11,000 - ¥11,000
¥11,000
¥11,000 - ¥11,000
¥11,000

2x Obliteration Hulks : Beta Pack

¥6,100 - ¥6,100
¥6,100
¥6,100 - ¥6,100
¥6,100

Kit Includes 2 Full Obliteration Hulk Models. The dark powers of the warp have brought forth this Hulk of Obliteration to rake destruction across t...

View full details
¥6,100 - ¥6,100
¥6,100
¥6,100 - ¥6,100
¥6,100

5x Saturnus Terminator Mk:3 Invader Squad

¥6,200 - ¥6,200
¥6,200
¥6,200 - ¥6,200
¥6,200

The Mk3 Saturnus-Pattern Terminator Armor was designed to harken back to the Darker Age of the Galactic Empire. Don't be fooled, they might look vi...

View full details
¥6,200 - ¥6,200
¥6,200
¥6,200 - ¥6,200
¥6,200

Featured collection

60x Maltese Cross : Shoulder Insignia pack 3d printed
60x Maltese Cross : Shoulder Insignia pack 3d printed

60x Maltese Cross : Shoulder Insignia pack

¥2,800 - ¥3,100
¥2,800 - ¥3,100
¥2,800 - ¥3,100
¥2,800

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥2,800 - ¥3,100
¥2,800 - ¥3,100
¥2,800 - ¥3,100
¥2,800
4x10 Squad Making MultiPack 3d printed
4x10 Squad Making MultiPack 3d printed

4x10 Squad Making MultiPack

¥3,700 - ¥4,000
¥3,700 - ¥4,000
¥3,700 - ¥4,000
¥3,700

This pack contains 10 Tactical, 10 Assault, 10 Devestator, and 10 Comand marks, designed to fit on shoulder-like or rounded area of your favorite m...

View full details
¥3,700 - ¥4,000
¥3,700 - ¥4,000
¥3,700 - ¥4,000
¥3,700
Xenos Hunters: Redemptor Honor Kit 3d printed

Xenos Hunters: Redemptor Honor Kit

¥2,300 - ¥3,200
¥2,300 - ¥3,200
¥2,300 - ¥3,200
¥2,300

These bits are designed to fit the Primaris Redemptor dreadnought model. They're meant to give your standard kit a unique look and provide raised e...

View full details
¥2,300 - ¥3,200
¥2,300 - ¥3,200
¥2,300 - ¥3,200
¥2,300
Prime Marine - Adjustable Arms (PM) 3d printed
Prime Marine - Adjustable Arms (PM) 3d printed

Prime Marine - Adjustable Arms (PM)

¥2,700 - ¥4,000
¥2,700 - ¥4,000
¥2,700 - ¥4,000
¥2,700

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms)Medium sprue = 10 Sets (20 tot...

View full details
¥2,700 - ¥4,000
¥2,700 - ¥4,000
¥2,700 - ¥4,000
¥2,700
Deathwatch Set 1 : Shoulder Insignia pack 3d printed

Deathwatch Set 1 : Shoulder Insignia pack

¥3,100 - ¥3,400
¥3,100 - ¥3,400
¥3,100 - ¥3,400
¥3,100

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥3,100 - ¥3,400
¥3,100 - ¥3,400
¥3,100 - ¥3,400
¥3,100
60x Kings Fist - Shoulder Insignia pack 3d printed
60x Kings Fist - Shoulder Insignia pack 3d printed

60x Kings Fist - Shoulder Insignia pack

¥3,500 - ¥4,200
¥3,500 - ¥4,200
¥3,500 - ¥4,200
¥3,500

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥3,500 - ¥4,200
¥3,500 - ¥4,200
¥3,500 - ¥4,200
¥3,500

Antonis : Arch Battleknight Conversion Kit

¥5,800 - ¥11,200
¥5,800 - ¥11,200
¥5,800 - ¥11,200
¥5,800

This conversion kit is designed to fit a standard GW Nemesis Dreadknight model kit. It is not a full model, just parts to add to your model kit to ...

View full details
¥5,800 - ¥11,200
¥5,800 - ¥11,200
¥5,800 - ¥11,200
¥5,800
60x Ultra Legion - Shoulder Insignia pack 3d printed
60x Ultra Legion - Shoulder Insignia pack 3d printed

60x Ultra Legion - Shoulder Insignia pack

¥3,500 - ¥4,200
¥3,500 - ¥4,200
¥3,500 - ¥4,200
¥3,500

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥3,500 - ¥4,200
¥3,500 - ¥4,200
¥3,500 - ¥4,200
¥3,500
10x Base - Crested G:10 Prime Helmets 3d printed
10x Base - Crested G:10 Prime Helmets 3d printed

10x Base - Crested G:11 Prime Helmets

¥2,900 - ¥2,900
¥2,900
¥2,900 - ¥2,900
¥2,900

The G:11 Prime Helmets were designed by the free-blade artist, Cornivius. It was inspired by the new Primaries models with a subtle ancient greek h...

View full details
¥2,900 - ¥2,900
¥2,900
¥2,900 - ¥2,900
¥2,900
Gen:3 Iron - Adjustable Arms 3d printed
Gen:3 Iron - Adjustable Arms 3d printed Small = 5 Sets / Medium = 10 Sets

Gen:3 Iron - Adjustable Arms

¥2,700 - ¥4,100
¥2,700 - ¥4,100
¥2,700 - ¥4,100
¥2,700

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms) Medium sprue = 10 Sets (20 to...

View full details
¥2,700 - ¥4,100
¥2,700 - ¥4,100
¥2,700 - ¥4,100
¥2,700
10x Deathwatch - T:1a Terminator Shoulders 3d printed
10x Deathwatch - T:1a Terminator Shoulders 3d printed

10x Xenos Hunters - T:1a Terminator Shoulders

¥3,200 - ¥3,300
¥3,200 - ¥3,300
¥3,200 - ¥3,300
¥3,200

The Terminator Series 1 style of shoulder pads are inspired to represent the Indomitus pattern Terminator armor (Standard). Sold unpainted, each pa...

View full details
¥3,200 - ¥3,300
¥3,200 - ¥3,300
¥3,200 - ¥3,300
¥3,200
View all Collection
View all Collection
Shop collection