Skip to content
Insignias Full Models Conv.Kits Marines Head Swaps Weapons Shields Vehicle Parts Walkers Apparel

Monkey Resin 3

Monkey Resin 3 is a high-quality UV cured resin that will come attached to a support structure from the production process. The parts are however, pre-cleaned and ready for primer once removed. Use only super glue to adhere these parts to your models.

To remove the bits from their supports: submerge the whole assembly in water that is hot to the touch for 5 minutes. Use your fingernail to punch away several supports to create a starting point, and carefully peel your parts off of the remaining supports all together.

You can use a very fine-grit sandpaper if needed to smooth any surface or feature further. Always be sure to wear a mask when working around resin dust.

10x Storm Scars - Prime:1 Mag. Vexilla PACs 3d printed
10x Storm Scars - Prime:1 Mag. Vexilla PACs 3d printed

10x Storm Scars - Prime:1 Mag. Vexilla PACs

¥3,400 - ¥5,500
¥3,400 - ¥5,500
¥3,400 - ¥5,500
¥3,400

The Prime:1 Mag. Vexilla PACs (Personal Atomic Cores) are specifically designed for the new, larger “Prime” Marine models. These backpacks are read...

View full details
¥3,400 - ¥5,500
¥3,400 - ¥5,500
¥3,400 - ¥5,500
¥3,400
Tigers Argent - Prime:1 PACs [Squad 1] Mag. 3d printed
Tigers Argent - Prime:1 PACs [Squad 1] Mag. 3d printed

Tigers Argent - Prime:1 Tiger PACs Squad Set (Mag-Vex)

¥3,900 - ¥6,200
¥3,900 - ¥6,200
¥3,900 - ¥6,200
¥3,900

This Squad Set includes the Mag Vexilla system which utilizes two, 1/16" x 1/8" (2mm x 3mm) Cylinder Magnets, to affix the Vexilla (banner) to the ...

View full details
¥3,900 - ¥6,200
¥3,900 - ¥6,200
¥3,900 - ¥6,200
¥3,900
4x Mag Vexilla - Chaos:1 PACs 3d printed utilizes two, 1/16" x 1/8" (2mm x 3mm) Cylinder Magnets

Base - Chaos:1 Mag Vexilla PACs

¥2,300 - ¥3,300
¥2,300 - ¥3,300
¥2,300 - ¥3,300
¥2,300

The Mag Vexilla system utilizes two, 1/16" x 1/8" (2mm x 3mm) Cylinder Magnets, to affix the Vexilla  (banner) to the backpack (Vexilla sold separa...

View full details
¥2,300 - ¥3,300
¥2,300 - ¥3,300
¥2,300 - ¥3,300
¥2,300

Featured collection

60x Maltese Cross : Shoulder Insignia pack 3d printed
60x Maltese Cross : Shoulder Insignia pack 3d printed

60x Maltese Cross : Shoulder Insignia pack

¥2,900 - ¥3,200
¥2,900 - ¥3,200
¥2,900 - ¥3,200
¥2,900

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥2,900 - ¥3,200
¥2,900 - ¥3,200
¥2,900 - ¥3,200
¥2,900
4x10 Squad Making MultiPack 3d printed
4x10 Squad Making MultiPack 3d printed

4x10 Squad Making MultiPack

¥3,800 - ¥4,100
¥3,800 - ¥4,100
¥3,800 - ¥4,100
¥3,800

This pack contains 10 Tactical, 10 Assault, 10 Devestator, and 10 Comand marks, designed to fit on shoulder-like or rounded area of your favorite m...

View full details
¥3,800 - ¥4,100
¥3,800 - ¥4,100
¥3,800 - ¥4,100
¥3,800
Xenos Hunters: Redemptor Honor Kit 3d printed

Xenos Hunters: Redemptor Honor Kit

¥2,400 - ¥3,300
¥2,400 - ¥3,300
¥2,400 - ¥3,300
¥2,400

These bits are designed to fit the Primaris Redemptor dreadnought model. They're meant to give your standard kit a unique look and provide raised e...

View full details
¥2,400 - ¥3,300
¥2,400 - ¥3,300
¥2,400 - ¥3,300
¥2,400
Prime Marine - Adjustable Arms (PM) 3d printed
Prime Marine - Adjustable Arms (PM) 3d printed

Prime Marine - Adjustable Arms (PM)

¥2,800 - ¥4,100
¥2,800 - ¥4,100
¥2,800 - ¥4,100
¥2,800

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms)Medium sprue = 10 Sets (20 tot...

View full details
¥2,800 - ¥4,100
¥2,800 - ¥4,100
¥2,800 - ¥4,100
¥2,800
Deathwatch Set 1 : Shoulder Insignia pack 3d printed

Deathwatch Set 1 : Shoulder Insignia pack

¥3,200 - ¥3,500
¥3,200 - ¥3,500
¥3,200 - ¥3,500
¥3,200

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥3,200 - ¥3,500
¥3,200 - ¥3,500
¥3,200 - ¥3,500
¥3,200
60x Kings Fist - Shoulder Insignia pack 3d printed
60x Kings Fist - Shoulder Insignia pack 3d printed

60x Kings Fist - Shoulder Insignia pack

¥3,700 - ¥4,300
¥3,700 - ¥4,300
¥3,700 - ¥4,300
¥3,700

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥3,700 - ¥4,300
¥3,700 - ¥4,300
¥3,700 - ¥4,300
¥3,700

Antonis : Arch Battleknight Conversion Kit

¥5,900 - ¥11,400
¥5,900 - ¥11,400
¥5,900 - ¥11,400
¥5,900

This conversion kit is designed to fit a standard GW Nemesis Dreadknight model kit. It is not a full model, just parts to add to your model kit to ...

View full details
¥5,900 - ¥11,400
¥5,900 - ¥11,400
¥5,900 - ¥11,400
¥5,900
10x Base - Crested G:10 Prime Helmets 3d printed
10x Base - Crested G:10 Prime Helmets 3d printed

10x Base - Crested G:11 Prime Helmets

¥3,000 - ¥3,000
¥3,000
¥3,000 - ¥3,000
¥3,000

The G:11 Prime Helmets were designed by the free-blade artist, Cornivius. It was inspired by the new Primaries models with a subtle ancient greek h...

View full details
¥3,000 - ¥3,000
¥3,000
¥3,000 - ¥3,000
¥3,000
60x Ultra Legion - Shoulder Insignia pack 3d printed
60x Ultra Legion - Shoulder Insignia pack 3d printed

60x Ultra Legion - Shoulder Insignia pack

¥3,700 - ¥4,300
¥3,700 - ¥4,300
¥3,700 - ¥4,300
¥3,700

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥3,700 - ¥4,300
¥3,700 - ¥4,300
¥3,700 - ¥4,300
¥3,700
Gen:3 Iron - Adjustable Arms 3d printed
Gen:3 Iron - Adjustable Arms 3d printed Small = 5 Sets / Medium = 10 Sets

Gen:3 Iron - Adjustable Arms

¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms) Medium sprue = 10 Sets (20 to...

View full details
¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800
10x Deathwatch - T:1a Terminator Shoulders 3d printed
10x Deathwatch - T:1a Terminator Shoulders 3d printed

10x Xenos Hunters - 5th Ed. Firstborn Terminator Pads

¥3,300 - ¥3,500
¥3,300 - ¥3,500
¥3,300 - ¥3,500
¥3,300

The 5th Edition Terminator Series of shoulder pads was designed for the classic Indomitus or Chaos (Firstborn) Terminator models. These pads can be...

View full details
¥3,300 - ¥3,500
¥3,300 - ¥3,500
¥3,300 - ¥3,500
¥3,300
View all Collection
View all Collection
Shop collection