Skip to content
Insignias Full Models Conv.Kits Marines Head Swaps Weapons Shields Vehicle Parts Walkers Apparel

Monkey Resin

Monkey Resin is a high-quality UV cured resin that will come attached to a support structure from the production process. The parts are however, pre-cleaned and ready for primer once removed. Use only super glue to adhere these parts to your models.

To remove the bits from their supports: submerge the whole assembly in water that is hot to the touch for 5 minutes. Use your fingernail to punch away several supports to create a starting point, and carefully peel your parts off of the remaining supports all together.

You can use a very fine-grit sandpaper if needed to smooth any surface or feature further. Always be sure to wear a mask when working around resin dust.

10x Xenos Hunters - Prime:1 PACs [Squad] 3d printed Designed for the new, bigger “Prime” Marine models

10x Xenos Hunters - Prime:1 PACs [Squad] (MR)

¥3,100 - ¥3,100
¥3,100
¥3,100 - ¥3,100
¥3,100

The Prime:1 PACs (Personal Atomic Cores) are designed for the new, bigger “Prime” Marine models. Give your troops a unique look by adding these cus...

View full details
¥3,100 - ¥3,100
¥3,100
¥3,100 - ¥3,100
¥3,100
Xenos Hunters - Prime:1 PACs 3d printed Small = 1 Backpack | Medium = 5 Backpacks | Large = 10 Backpacks
Xenos Hunters - Prime:1 PACs 3d printed Small = 1 Backpack | Medium = 5 Backpacks | Large = 10 Backpacks

Xenos Hunters - Prime:1 PACs (MR)

¥1,300 - ¥3,100
¥1,300 - ¥3,100
¥1,300 - ¥3,100
¥1,300

NOTE: Size Selection Equates to Quantity per Sprue, Not the Products’ Scale. Small = 1 Backpack Medium = 5 Backpacks Large = 10 Backpacks The Prim...

View full details
¥1,300 - ¥3,100
¥1,300 - ¥3,100
¥1,300 - ¥3,100
¥1,300
Xenos Hunters- Prime:1 Halo 3d printed Small = 1 Backpack | Medium = 5 Backpacks
Xenos Hunters- Prime:1 Halo 3d printed Small = 1 Backpack | Medium = 5 Backpacks

Xenos Hunters- Prime:1 Halo (MR)

¥1,500 - ¥2,300
¥1,500 - ¥2,300
¥1,500 - ¥2,300
¥1,500

NOTE: Size Selection Equates to Quantity per Sprue, Not the Products’ Scale. Small = 1 Backpack Medium = 5 Backpacks The Prime:1 PACs (Personal At...

View full details
¥1,500 - ¥2,300
¥1,500 - ¥2,300
¥1,500 - ¥2,300
¥1,500
10x Blood Wing - Prime:1 PACs 3d printed Designed for the new, bigger “Prime” Marine models

10x Blood Wing - Prime:1 PACs (MR)

¥2,900 - ¥2,900
¥2,900
¥2,900 - ¥2,900
¥2,900

The Prime:1 PACs (Personal Atomic Cores) are designed for the new, bigger “Prime” Marine models. Give your troops a unique look by adding these cus...

View full details
¥2,900 - ¥2,900
¥2,900
¥2,900 - ¥2,900
¥2,900

Studded - Chordero Jetpacks (MR)

¥2,800 - ¥4,400
¥2,800 - ¥4,400
¥2,800 - ¥4,400
¥2,800

NOTE: The SIZE Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Medium sprue = 5 JetpackLarge sprue = 10 JetpacksThese custom desig...

View full details
¥2,800 - ¥4,400
¥2,800 - ¥4,400
¥2,800 - ¥4,400
¥2,800

Spiked - Prime Chordero Jetpacks (MR)

¥2,800 - ¥4,400
¥2,800 - ¥4,400
¥2,800 - ¥4,400
¥2,800

NOTE: The SIZE Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Medium sprue = 5 JetpacksLarge sprue = 10 JetpacksThese custom desi...

View full details
¥2,800 - ¥4,400
¥2,800 - ¥4,400
¥2,800 - ¥4,400
¥2,800
Xenos Hunters - Prime:1 Comms PAC 3d printed
Xenos Hunters - Prime:1 Comms PAC 3d printed

Xenos Hunters - Prime:1 Comms PAC (MR)

¥1,500 - ¥2,300
¥1,500 - ¥2,300
¥1,500 - ¥2,300
¥1,500

NOTE: Size Selection Equates to Quantity per Sprue, Not the Products’ Scale. Small = 1 Backpack Medium = 5 Backpacks The Prime:1 PACs (Personal At...

View full details
¥1,500 - ¥2,300
¥1,500 - ¥2,300
¥1,500 - ¥2,300
¥1,500
Blood Wing - Gryphus Angelwing Jetpacks (PM) 3d printed

Blood Wing - Gryphus Angelwing Jetpacks (PM) (MR)

¥1,600 - ¥3,700
¥1,600 - ¥3,700
¥1,600 - ¥3,700
¥1,600

NOTE: Size Selection Equates to Quantity per Sprue, Not the Products’ Scale. Small = 1 Jetpack Medium = 5 Jetpacks These custom designed Jetpacks ...

View full details
¥1,600 - ¥3,700
¥1,600 - ¥3,700
¥1,600 - ¥3,700
¥1,600
10x Nihon Knights - Prime:1 Vexilla PACs 3d printed You get 10 backpacks

Nihon Knights - Prime:1 Vexilla PACs (MR)

¥1,500 - ¥2,900
¥1,500 - ¥2,900
¥1,500 - ¥2,900
¥1,500

The Prime:1 PACs (Personal Atomic Cores) are designed for the new, bigger “Prime” Marine models. This Set includes just  Banner-Ready Pack that uti...

View full details
¥1,500 - ¥2,900
¥1,500 - ¥2,900
¥1,500 - ¥2,900
¥1,500

Featured collection

60x Maltese Cross : Shoulder Insignia pack 3d printed
60x Maltese Cross : Shoulder Insignia pack 3d printed

60x Maltese Cross : Shoulder Insignia pack

¥2,600 - ¥2,900
¥2,600 - ¥2,900
¥2,600 - ¥2,900
¥2,600

This insignia pack is designed to fit on any shoulder or rounded area of your favorite models. (YES, they fit the new marines) They are meant to pe...

View full details
¥2,600 - ¥2,900
¥2,600 - ¥2,900
¥2,600 - ¥2,900
¥2,600
4x10 Squad Making MultiPack 3d printed
4x10 Squad Making MultiPack 3d printed

4x10 Squad Making MultiPack

¥3,200 - ¥4,100
¥3,200 - ¥4,100
¥3,200 - ¥4,100
¥3,200

This pack contains 10 Tactical, 10 Assault, 10 Devestator, and 10 Comand marks, designed to fit on shoulder-like or rounded area of your favorite m...

View full details
¥3,200 - ¥4,100
¥3,200 - ¥4,100
¥3,200 - ¥4,100
¥3,200
Prime Marine - Adjustable Arms (PM) 3d printed
Prime Marine - Adjustable Arms (PM) 3d printed

Prime Marine - Adjustable Arms (PM)

¥2,500 - ¥4,300
¥2,500 - ¥4,300
¥2,500 - ¥4,300
¥2,500

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms)Medium sprue = 10 Sets (20 tot...

View full details
¥2,500 - ¥4,300
¥2,500 - ¥4,300
¥2,500 - ¥4,300
¥2,500
Arch Battleknight: Antonis 3d printed
Arch Battleknight: Antonis 3d printed

Arch Battleknight: Antonis

¥9,200 - ¥11,900
¥9,200 - ¥11,900
¥9,200 - ¥11,900
¥9,200

This conversion kit is designed to fit a standard GW Nemesis Dreadknight model kit. It is not a full model, just parts to add to your model kit to ...

View full details
¥9,200 - ¥11,900
¥9,200 - ¥11,900
¥9,200 - ¥11,900
¥9,200
60x Kings Fist - Shoulder Insignia pack 3d printed
60x Kings Fist - Shoulder Insignia pack 3d printed

60x Kings Fist - Shoulder Insignia pack

¥2,900 - ¥3,200
¥2,900 - ¥3,200
¥2,900 - ¥3,200
¥2,900

This insignia pack is designed to fit on any shoulder or rounded area of your favorite models. (YES, they fit the new marines) They are meant to pe...

View full details
¥2,900 - ¥3,200
¥2,900 - ¥3,200
¥2,900 - ¥3,200
¥2,900
Gen:4 Maximus - Adjustable Arms 3d printed
Gen:4 Maximus - Adjustable Arms 3d printed

Gen:4 Maximus - Adjustable Arms

¥2,500 - ¥4,300
¥2,500 - ¥4,300
¥2,500 - ¥4,300
¥2,500

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms)Medium sprue = 10 Sets (20 tot...

View full details
¥2,500 - ¥4,300
¥2,500 - ¥4,300
¥2,500 - ¥4,300
¥2,500
Gen:3 Iron - Adjustable Arms 3d printed
Gen:3 Iron - Adjustable Arms 3d printed Small = 5 Sets / Medium = 10 Sets

Gen:3 Iron - Adjustable Arms

¥2,500 - ¥4,400
¥2,500 - ¥4,400
¥2,500 - ¥4,400
¥2,500

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms) Medium sprue = 10 Sets (20 to...

View full details
¥2,500 - ¥4,400
¥2,500 - ¥4,400
¥2,500 - ¥4,400
¥2,500
60x Ultra Legion - Shoulder Insignia pack 3d printed
60x Ultra Legion - Shoulder Insignia pack 3d printed

60x Ultra Legion - Shoulder Insignia pack

¥2,700 - ¥2,900
¥2,700 - ¥2,900
¥2,700 - ¥2,900
¥2,700

This insignia pack is designed to fit on any shoulder or rounded area of your favorite models. (YES, they fit the new marines) They are meant to pe...

View full details
¥2,700 - ¥2,900
¥2,700 - ¥2,900
¥2,700 - ¥2,900
¥2,700
10x Base - Crested G:10 Prime Helmets 3d printed
10x Base - Crested G:10 Prime Helmets 3d printed

10x Base - Crested G:10 Prime Helmets

¥2,700 - ¥3,100
¥2,700 - ¥3,100
¥2,700 - ¥3,100
¥2,700

The G:10 Prime Helmets were designed by the free-blade artist, Cornivius. It was inspired by the new Primaries models with a subtle ancient greek h...

View full details
¥2,700 - ¥3,100
¥2,700 - ¥3,100
¥2,700 - ¥3,100
¥2,700
Deathwatch Set 1 : Shoulder Insignia pack 3d printed

Deathwatch Set 1 : Shoulder Insignia pack

¥3,200 - ¥3,500
¥3,200 - ¥3,500
¥3,200 - ¥3,500
¥3,200

This insignia pack is designed to fit on any shoulder or rounded area of your favorite models. (YES, they fit the new marines) They are meant to pe...

View full details
¥3,200 - ¥3,500
¥3,200 - ¥3,500
¥3,200 - ¥3,500
¥3,200
Xenos Hunters: Redemptor Honor Kit 3d printed
Xenos Hunters: Redemptor Honor Kit 3d printed

Xenos Hunters: Redemptor Honor Kit

¥2,800 - ¥3,400
¥2,800 - ¥3,400
¥2,800 - ¥3,400
¥2,800

These bits are designed to fit the Primaris Redemptor dreadnought model. They're meant to give your standard kit a unique look and provide raised e...

View full details
¥2,800 - ¥3,400
¥2,800 - ¥3,400
¥2,800 - ¥3,400
¥2,800
View all Collection
View all Collection
Shop collection