Skip to content
Insignias Full Models Conv.Kits Marines Head Swaps Weapons Shields Vehicle Parts Walkers Apparel

Monkey Resin 3

Monkey Resin 3 is a high-quality UV cured resin that will come attached to a support structure from the production process. The parts are however, pre-cleaned and ready for primer once removed. Use only super glue to adhere these parts to your models.

To remove the bits from their supports: submerge the whole assembly in water that is hot to the touch for 5 minutes. Use your fingernail to punch away several supports to create a starting point, and carefully peel your parts off of the remaining supports all together.

You can use a very fine-grit sandpaper if needed to smooth any surface or feature further. Always be sure to wear a mask when working around resin dust.

Warmaster’s Eye - Marine Boarding Shields

¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500

Evil Eye - Marine Boarding Shields

¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500

Plague Sun - Marine Boarding Shields

¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500

Dusk Raiders - Marine Boarding Shields

¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500

Moon Wolves - Marine Boarding Shields

¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500
Storm Fists - Trojan Power Shields (L&R) 3d printed
Storm Fists - Trojan Power Shields (L&R) 3d printed Small = 2 Shield (L&R)

Storm Fists - Trojan Power Shields (L&R)

¥2,300 - ¥5,000
¥2,300 - ¥5,000
¥2,300 - ¥5,000
¥2,300

The Trojan Power Shield was inspired by the ancient Greek shields carried by the infantry, sometimes referred to as a hoplon. Each set includes bot...

View full details
¥2,300 - ¥5,000
¥2,300 - ¥5,000
¥2,300 - ¥5,000
¥2,300
Blood Wing - Power Kite Shields (Left) 3d printed Small = 1 Shield

Blood Wing - Power Kite Shields (Left)

¥2,100 - ¥3,200
¥2,100 - ¥3,200
¥2,100 - ¥3,200
¥2,100

The Power Kite Shield was inspired by the nobel shields carried by the classic medieval knight. Sold unpainted, they are designed to fit any of you...

View full details
¥2,100 - ¥3,200
¥2,100 - ¥3,200
¥2,100 - ¥3,200
¥2,100
Triskelion 2 - Round Power Shields (L&R) 3d printed

Triskelion 2 - Round Power Shields (L&R)

¥2,400 - ¥6,400
¥2,400 - ¥6,400
¥2,400 - ¥6,400
¥2,400

The Round Power Shield was inspired by the large round shields carried by the ancient Viking Warriors and Greek Hoplites. These sets include a even...

View full details
¥2,400 - ¥6,400
¥2,400 - ¥6,400
¥2,400 - ¥6,400
¥2,400
Devil Rays - Round Power Shields (L&R) 3d printed

Devil Rays - Round Power Shields (L&R)

¥2,600 - ¥6,700
¥2,600 - ¥6,700
¥2,600 - ¥6,700
¥2,600

The Round Power Shield was inspired by the large round shields carried by the ancient Viking Warriors and Greek Hoplites. These sets include a even...

View full details
¥2,600 - ¥6,700
¥2,600 - ¥6,700
¥2,600 - ¥6,700
¥2,600
4 Point Boss - Round Power Shields (L&R) 3d printed

4 Point Boss - Round Power Shields (L&R)

¥2,300 - ¥6,200
¥2,300 - ¥6,200
¥2,300 - ¥6,200
¥2,300

The Round Power Shield was inspired by the large round shields carried by the ancient Viking Warriors and Greek Hoplites. These sets include a even...

View full details
¥2,300 - ¥6,200
¥2,300 - ¥6,200
¥2,300 - ¥6,200
¥2,300
Clan Amphisbaena - Palatium Boarding Shields 1 3d printed
Clan Amphisbaena - Palatium Boarding Shields 1 3d printed

Clan Amphisbaena - Palatium Boarding Shields 1

¥2,200 - ¥6,000
¥2,200 - ¥6,000
¥2,200 - ¥6,000
¥2,200

All Palatium Boarding Shields are designed for left-handed use, allowing your 28mm marine models to create a strong, interlocked wall of firepower....

View full details
¥2,200 - ¥6,000
¥2,200 - ¥6,000
¥2,200 - ¥6,000
¥2,200
Maltese Cross - Palatium Boarding Shields 3d printed

Maltese Cross - Palatium Boarding Shields

¥2,200 - ¥6,000
¥2,200 - ¥6,000
¥2,200 - ¥6,000
¥2,200

All Palatium Boarding Shields are designed for left-handed use, allowing your 28mm marine models to create a strong, interlocked wall of firepower....

View full details
¥2,200 - ¥6,000
¥2,200 - ¥6,000
¥2,200 - ¥6,000
¥2,200

Featured collection

60x Maltese Cross : Shoulder Insignia pack 3d printed
60x Maltese Cross : Shoulder Insignia pack 3d printed

60x Maltese Cross : Shoulder Insignia pack

¥2,700 - ¥3,100
¥2,700 - ¥3,100
¥2,700 - ¥3,100
¥2,700

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥2,700 - ¥3,100
¥2,700 - ¥3,100
¥2,700 - ¥3,100
¥2,700
4x10 Squad Making MultiPack 3d printed
4x10 Squad Making MultiPack 3d printed

4x10 Squad Making MultiPack

¥3,700 - ¥4,000
¥3,700 - ¥4,000
¥3,700 - ¥4,000
¥3,700

This pack contains 10 Tactical, 10 Assault, 10 Devestator, and 10 Comand marks, designed to fit on shoulder-like or rounded area of your favorite m...

View full details
¥3,700 - ¥4,000
¥3,700 - ¥4,000
¥3,700 - ¥4,000
¥3,700
Xenos Hunters: Redemptor Honor Kit 3d printed

Xenos Hunters: Redemptor Honor Kit

¥2,300 - ¥3,200
¥2,300 - ¥3,200
¥2,300 - ¥3,200
¥2,300

These bits are designed to fit the Primaris Redemptor dreadnought model. They're meant to give your standard kit a unique look and provide raised e...

View full details
¥2,300 - ¥3,200
¥2,300 - ¥3,200
¥2,300 - ¥3,200
¥2,300
Prime Marine - Adjustable Arms (PM) 3d printed
Prime Marine - Adjustable Arms (PM) 3d printed

Prime Marine - Adjustable Arms (PM)

¥2,700 - ¥4,000
¥2,700 - ¥4,000
¥2,700 - ¥4,000
¥2,700

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms)Medium sprue = 10 Sets (20 tot...

View full details
¥2,700 - ¥4,000
¥2,700 - ¥4,000
¥2,700 - ¥4,000
¥2,700
Deathwatch Set 1 : Shoulder Insignia pack 3d printed

Deathwatch Set 1 : Shoulder Insignia pack

¥3,100 - ¥3,400
¥3,100 - ¥3,400
¥3,100 - ¥3,400
¥3,100

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥3,100 - ¥3,400
¥3,100 - ¥3,400
¥3,100 - ¥3,400
¥3,100
60x Kings Fist - Shoulder Insignia pack 3d printed
60x Kings Fist - Shoulder Insignia pack 3d printed

60x Kings Fist - Shoulder Insignia pack

¥3,500 - ¥4,200
¥3,500 - ¥4,200
¥3,500 - ¥4,200
¥3,500

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥3,500 - ¥4,200
¥3,500 - ¥4,200
¥3,500 - ¥4,200
¥3,500

Antonis : Arch Battleknight Conversion Kit

¥5,700 - ¥11,100
¥5,700 - ¥11,100
¥5,700 - ¥11,100
¥5,700

This conversion kit is designed to fit a standard GW Nemesis Dreadknight model kit. It is not a full model, just parts to add to your model kit to ...

View full details
¥5,700 - ¥11,100
¥5,700 - ¥11,100
¥5,700 - ¥11,100
¥5,700
60x Ultra Legion - Shoulder Insignia pack 3d printed
60x Ultra Legion - Shoulder Insignia pack 3d printed

60x Ultra Legion - Shoulder Insignia pack

¥3,500 - ¥4,200
¥3,500 - ¥4,200
¥3,500 - ¥4,200
¥3,500

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥3,500 - ¥4,200
¥3,500 - ¥4,200
¥3,500 - ¥4,200
¥3,500
10x Base - Crested G:10 Prime Helmets 3d printed
10x Base - Crested G:10 Prime Helmets 3d printed

10x Base - Crested G:11 Prime Helmets

¥2,900 - ¥2,900
¥2,900
¥2,900 - ¥2,900
¥2,900

The G:11 Prime Helmets were designed by the free-blade artist, Cornivius. It was inspired by the new Primaries models with a subtle ancient greek h...

View full details
¥2,900 - ¥2,900
¥2,900
¥2,900 - ¥2,900
¥2,900
Gen:3 Iron - Adjustable Arms 3d printed
Gen:3 Iron - Adjustable Arms 3d printed Small = 5 Sets / Medium = 10 Sets

Gen:3 Iron - Adjustable Arms

¥2,700 - ¥4,100
¥2,700 - ¥4,100
¥2,700 - ¥4,100
¥2,700

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms) Medium sprue = 10 Sets (20 to...

View full details
¥2,700 - ¥4,100
¥2,700 - ¥4,100
¥2,700 - ¥4,100
¥2,700
10x Deathwatch - T:1a Terminator Shoulders 3d printed
10x Deathwatch - T:1a Terminator Shoulders 3d printed

10x Xenos Hunters - T:1a Terminator Shoulders

¥3,200 - ¥3,300
¥3,200 - ¥3,300
¥3,200 - ¥3,300
¥3,200

The Terminator Series 1 style of shoulder pads are inspired to represent the Indomitus pattern Terminator armor (Standard). Sold unpainted, each pa...

View full details
¥3,200 - ¥3,300
¥3,200 - ¥3,300
¥3,200 - ¥3,300
¥3,200
View all Collection
View all Collection
Shop collection