Skip to content
Insignias Full Models Conv.Kits Marines Head Swaps Weapons Shields Vehicle Parts Walkers Apparel

Monkey Resin 3

Monkey Resin 3 is a high-quality UV cured resin that will come attached to a support structure from the production process. The parts are however, pre-cleaned and ready for primer once removed. Use only super glue to adhere these parts to your models.

To remove the bits from their supports: submerge the whole assembly in water that is hot to the touch for 5 minutes. Use your fingernail to punch away several supports to create a starting point, and carefully peel your parts off of the remaining supports all together.

You can use a very fine-grit sandpaper if needed to smooth any surface or feature further. Always be sure to wear a mask when working around resin dust.

Dragon Head - Trojan Power Shields (L&R)

¥2,400 - ¥5,100
¥2,400 - ¥5,100
¥2,400 - ¥5,100
¥2,400

The Trojan Power Shield was inspired by the ancient Greek shields carried by the infantry, sometimes referred to as a hoplon. Each set includes bot...

View full details
¥2,400 - ¥5,100
¥2,400 - ¥5,100
¥2,400 - ¥5,100
¥2,400
Kings Fist - Aquilas Boarding Shields (L) 3d printed

Kings Fist - Aquilas Tower Shields (L/R)

¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

The Aquilas Tower Shields are large ornate shields great for Bladeguard Veterans, Honor Guards, or Assault Terminators. They are sold being held in...

View full details
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300
Blank - Terminator Power Shields (Left) 3d printed Small = 1 Shield | Medium = 5 Shields | Large = 10 Shields

Blank - Round Terminator Shields

¥1,900 - ¥6,900
¥1,900 - ¥6,900
¥1,900 - ¥6,900
¥1,900

The Round Terminator Shields are the same size as our Round Power Shields but include a larger hand on the back to fit a Terminator model. Inspired...

View full details
¥1,900 - ¥6,900
¥1,900 - ¥6,900
¥1,900 - ¥6,900
¥1,900

Shaggy Wolf - Round Terminator Shields

¥1,900 - ¥6,900
¥1,900 - ¥6,900
¥1,900 - ¥6,900
¥1,900

The Round Terminator Shields are the same size as our Round Power Shields but include a larger hand on the back to fit a Terminator model. Inspired...

View full details
¥1,900 - ¥6,900
¥1,900 - ¥6,900
¥1,900 - ¥6,900
¥1,900
Base - Trojan Power Shields (L&R) 3d printed
Base - Trojan Power Shields (L&R) 3d printed

Base - Trojan Power Shields (L&R)

¥2,400 - ¥5,100
¥2,400 - ¥5,100
¥2,400 - ¥5,100
¥2,400

The Trojan Power Shield was inspired by the ancient Greek shields carried by the infantry, sometimes referred to as a hoplon. Each set includes bot...

View full details
¥2,400 - ¥5,100
¥2,400 - ¥5,100
¥2,400 - ¥5,100
¥2,400

Greek Bull - Trojan Power Shields (L&R)

¥2,400 - ¥5,100
¥2,400 - ¥5,100
¥2,400 - ¥5,100
¥2,400

The Trojan Power Shield was inspired by the ancient Greek shields carried by the infantry, sometimes referred to as a hoplon. Each set includes bot...

View full details
¥2,400 - ¥5,100
¥2,400 - ¥5,100
¥2,400 - ¥5,100
¥2,400
Winged Sword - Aquilas Boarding Shields (L) 3d printed
Winged Sword - Aquilas Boarding Shields (L) 3d printed

Winged Sword - Aquilas Tower Shields (L/R)

¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

The Aquilas Tower Shields are large ornate shields great for Bladeguard Veterans, Honor Guards, or Assault Terminators. They are sold being held in...

View full details
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

Maltese Cross - Aquilas Tower Shields (L/R)

¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

The Aquilas Tower Shields are large ornate shields great for Bladeguard Veterans, Honor Guards, or Assault Terminators. They are sold being held in...

View full details
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300
Shaggy Wolf - Terminator Wall Shields 3d printed Small = 1 Shield | Medium = 5 Shields | Large = 10 Shields

Shaggy Wolf - Terminator Wall Shields

¥1,800 - ¥5,000
¥1,800 - ¥5,000
¥1,800 - ¥5,000
¥1,800

The Terminator Wall Shields are an enlarged variant of the standard marine boarding shield, making them an excellent alternative to the typical sto...

View full details
¥1,800 - ¥5,000
¥1,800 - ¥5,000
¥1,800 - ¥5,000
¥1,800

Ultra Legion - Aquilas Tower Shields (L/R)

¥2,300 - ¥7,900
¥2,300 - ¥7,900
¥2,300 - ¥7,900
¥2,300

The Aquilas Tower Shields are large ornate shields great for Bladeguard Veterans, Honor Guards, or Assault Terminators. They are sold being held in...

View full details
¥2,300 - ¥7,900
¥2,300 - ¥7,900
¥2,300 - ¥7,900
¥2,300
Neptune Spears - Trojan Power Shields (L&R) 3d printed
Neptune Spears - Trojan Power Shields (L&R) 3d printed

Neptune Spears - Trojan Power Shields (L&R)

¥2,400 - ¥5,100
¥2,400 - ¥5,100
¥2,400 - ¥5,100
¥2,400

The Trojan Power Shield was inspired by the ancient Greek shields carried by the infantry, sometimes referred to as a hoplon. Each set includes bot...

View full details
¥2,400 - ¥5,100
¥2,400 - ¥5,100
¥2,400 - ¥5,100
¥2,400
Hydra Legion - Trojan Power Shields (L&R) 3d printed
Hydra Legion - Trojan Power Shields (L&R) 3d printed

Hydra Legion - Trojan Power Shields (L&R)

¥2,400 - ¥5,100
¥2,400 - ¥5,100
¥2,400 - ¥5,100
¥2,400

The Trojan Power Shield was inspired by the ancient Greek shields carried by the infantry, sometimes referred to as a hoplon. Each set includes bot...

View full details
¥2,400 - ¥5,100
¥2,400 - ¥5,100
¥2,400 - ¥5,100
¥2,400
Iron Heads - Terminator Wall Shields 3d printed Small = 1 Shield | Medium = 5 Shields | Large = 10 Shields

Iron Heads - Terminator Wall Shields

¥1,600 - ¥4,600
¥1,600 - ¥4,600
¥1,600 - ¥4,600
¥1,600

The Terminator Wall Shields are an enlarged variant of the standard marine boarding shield, making them an excellent alternative to the typical sto...

View full details
¥1,600 - ¥4,600
¥1,600 - ¥4,600
¥1,600 - ¥4,600
¥1,600

Blood Wing - Aquilas Tower Shields (L/R)

¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

The Aquilas Tower Shields are large ornate shields great for Bladeguard Veterans, Honor Guards, or Assault Terminators. They are sold being held in...

View full details
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300
Blank Left-Handed : Terminator Wall Shields 3d printed Small = 1 Shield | Medium = 5 Shields | Large = 10 Shields

Blank Left-handed : Terminator Wall Shields

¥1,800 - ¥4,900
¥1,800 - ¥4,900
¥1,800 - ¥4,900
¥1,800

The Terminator Wall Shields are an enlarged variant of the standard marine boarding shield, making them an excellent alternative to the typical sto...

View full details
¥1,800 - ¥4,900
¥1,800 - ¥4,900
¥1,800 - ¥4,900
¥1,800

Icon-Ready : Trojan Power Shields (L&R)

¥2,400 - ¥5,100
¥2,400 - ¥5,100
¥2,400 - ¥5,100
¥2,400

The Trojan Power Shield was inspired by the ancient Greek shields carried by the infantry, sometimes referred to as a hoplon. Each set includes bot...

View full details
¥2,400 - ¥5,100
¥2,400 - ¥5,100
¥2,400 - ¥5,100
¥2,400
Base - Aquilas Boarding Shields (L) 3d printed Small = 1 Shield | Medium = 5 Shields

Base - Aquilas Tower Shields (L/R)

¥1,600 - ¥4,200
¥1,600 - ¥4,200
¥1,600 - ¥4,200
¥1,600

The Aquilas Tower Shields are large ornate shields great for Bladeguard Veterans, Honor Guards, or Assault Terminators. They are sold being held in...

View full details
¥1,600 - ¥4,200
¥1,600 - ¥4,200
¥1,600 - ¥4,200
¥1,600

Norse Ring - Round Terminator Shields

¥1,900 - ¥4,200
¥1,900 - ¥4,200
¥1,900 - ¥4,200
¥1,900

The Round Terminator Shields are the same size as our Round Power Shields but include a larger hand on the back to fit a Terminator model. Inspired...

View full details
¥1,900 - ¥4,200
¥1,900 - ¥4,200
¥1,900 - ¥4,200
¥1,900

Death Angels - Aquilas Tower Shields (L/R)

¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

The Aquilas Tower Shields are large ornate shields great for Bladeguard Veterans, Honor Guards, or Assault Terminators. They are sold being held in...

View full details
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300
Mech Hands - Terminator Wall Shields 3d printed

Mech Hands - Terminator Wall Shields

¥1,800 - ¥5,000
¥1,800 - ¥5,000
¥1,800 - ¥5,000
¥1,800

The Terminator Wall Shields are an enlarged variant of the standard marine boarding shield, making them an excellent alternative to the typical sto...

View full details
¥1,800 - ¥5,000
¥1,800 - ¥5,000
¥1,800 - ¥5,000
¥1,800
Mako Shark - Terminator Wall Shields 3d printed Small = 1 Shield | Medium = 5 Shields

Makodon - Terminator Wall Shields

¥2,200 - ¥3,400
¥2,200 - ¥3,400
¥2,200 - ¥3,400
¥2,200

The Terminator Wall Shields are an enlarged variant of the standard marine boarding shield, making them an excellent alternative to the typical sto...

View full details
¥2,200 - ¥3,400
¥2,200 - ¥3,400
¥2,200 - ¥3,400
¥2,200

Xeno Hunters - Aquilas Tower Shields (L/R)

¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

The Aquilas Tower Shields are large ornate shields great for Bladeguard Veterans, Honor Guards, or Assault Terminators. They are sold being held in...

View full details
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

Emperor's Third - Aquilas Tower Shields (L/R)

¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

The Aquilas Tower Shields are large ornate shields great for Bladeguard Veterans, Honor Guards, or Assault Terminators. They are sold being held in...

View full details
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300
Palace Guard - Terminator Wall Shields 3d printed
Palace Guard - Terminator Wall Shields 3d printed Small = 1 Shield

Palace Guard - Terminator Wall Shields

¥2,300 - ¥5,000
¥2,300 - ¥5,000
¥2,300 - ¥5,000
¥2,300

The Terminator Wall Shields are an enlarged variant of the standard marine boarding shield, making them an excellent alternative to the typical sto...

View full details
¥2,300 - ¥5,000
¥2,300 - ¥5,000
¥2,300 - ¥5,000
¥2,300
Base Right-Handed: Terminator Wall Shields 3d printed

Base Right-Handed : Terminator Wall Shields

¥2,200 - ¥3,400
¥2,200 - ¥3,400
¥2,200 - ¥3,400
¥2,200

The Terminator Wall Shields are an enlarged variant of the standard marine boarding shield, making them an excellent alternative to the typical sto...

View full details
¥2,200 - ¥3,400
¥2,200 - ¥3,400
¥2,200 - ¥3,400
¥2,200
Royal Guard - Aquilas Boarding Shields (L) 3d printed

Royal Guard - Aquilas Tower Shields (L/R)

¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

The Aquilas Tower Shields are large ornate shields great for Bladeguard Veterans, Honor Guards, or Assault Terminators. They are sold being held in...

View full details
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300
Ultra Legion - Terminator Wall Shields 3d printed
Ultra Legion - Terminator Wall Shields 3d printed Small = 1 Shield | Medium = 5 Shields | Large = 10 Shields

Ultra Legion - Terminator Wall Shields

¥2,200 - ¥5,000
¥2,200 - ¥5,000
¥2,200 - ¥5,000
¥2,200

The Terminator Wall Shields are an enlarged variant of the standard marine boarding shield, making them an excellent alternative to the typical sto...

View full details
¥2,200 - ¥5,000
¥2,200 - ¥5,000
¥2,200 - ¥5,000
¥2,200
5x ST Vronti Shields: Zeus (Insignia-Ready) 3d printed
5x ST Vronti Shields: Zeus (Insignia-Ready) 3d printed These arms will fit into any ST:1 Terminator torsos.

5x ST Vronti Shields: Zeus (Insignia-Ready)

¥2,900 - ¥4,400
¥2,900 - ¥4,400
¥2,900 - ¥4,400
¥2,900

These Left-handed Saturnus Terminator (ST) Power Shields have a flat surface in the center of the shield, that will allow you to brand them with on...

View full details
¥2,900 - ¥4,400
¥2,900 - ¥4,400
¥2,900 - ¥4,400
¥2,900

Angel Tears - Aquilas Tower Shields (L/R)

¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

The Aquilas Tower Shields are large ornate shields great for Bladeguard Veterans, Honor Guards, or Assault Terminators. They are sold being held in...

View full details
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300
Minotaurs - Terminator Wall Shields 3d printed Small = 1 Shield | Medium = 5 Shields

Greek Bull - Terminator Wall Shields

¥2,200 - ¥3,400
¥2,200 - ¥3,400
¥2,200 - ¥3,400
¥2,200

The Terminator Wall Shields are an enlarged variant of the standard marine boarding shield, making them an excellent alternative to the typical sto...

View full details
¥2,200 - ¥3,400
¥2,200 - ¥3,400
¥2,200 - ¥3,400
¥2,200
5x ST Vronti Shields: Base (Insignia-Ready) 3d printed
5x ST Vronti Shields: Base (Insignia-Ready) 3d printed

5x ST Vronti Shields: Base (Insignia-Ready)

¥2,900 - ¥4,300
¥2,900 - ¥4,300
¥2,900 - ¥4,300
¥2,900

These Left-handed Saturnus Terminator (ST) Power Shields have a flat surface that will allow you to brand them with a flat vehicle insignia. The at...

View full details
¥2,900 - ¥4,300
¥2,900 - ¥4,300
¥2,900 - ¥4,300
¥2,900
Sons of the Hunt - Terminator Power Shields (Left) 3d printed Small = 1 Shield | Medium = 5 Shields | Large = 10 Shields

Sons of the Hunt - Round Terminator Shields

¥1,900 - ¥6,900
¥1,900 - ¥6,900
¥1,900 - ¥6,900
¥1,900

The Round Terminator Shields are the same size as our Round Power Shields but include a larger hand on the back to fit a Terminator model. Inspired...

View full details
¥1,900 - ¥6,900
¥1,900 - ¥6,900
¥1,900 - ¥6,900
¥1,900
Dusk Raider - Terminator Wall Shields 3d printed Small = 1 Shield | Medium = 5 Shields

Dusk Raider - Terminator Wall Shields

¥2,200 - ¥3,400
¥2,200 - ¥3,400
¥2,200 - ¥3,400
¥2,200

The Terminator Wall Shields are an enlarged variant of the standard marine boarding shield, making them an excellent alternative to the typical sto...

View full details
¥2,200 - ¥3,400
¥2,200 - ¥3,400
¥2,200 - ¥3,400
¥2,200
Skota Vlka - Terminator Wall Shields (Left) 3d printed
Skota Vlka - Terminator Wall Shields (Left) 3d printed Small = 1 Shield | Medium = 5 Shields | Large = 10 Shields

Skota Vlka - Terminator Wall Shields (Left)

¥2,200 - ¥5,000
¥2,200 - ¥5,000
¥2,200 - ¥5,000
¥2,200

The Terminator Wall Shields are an enlarged variant of the standard marine boarding shield, making them an excellent alternative to the typical sto...

View full details
¥2,200 - ¥5,000
¥2,200 - ¥5,000
¥2,200 - ¥5,000
¥2,200

Insignia-Ready : Aquilas Tower Shields (L/R)

¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

The Aquilas Tower Shields are large ornate shields great for Bladeguard Veterans, Honor Guards, or Assault Terminators. They are sold being held in...

View full details
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

Divine Word - Bulwark Repulser Shields

¥2,400 - ¥4,400
¥2,400 - ¥4,400
¥2,400 - ¥4,400
¥2,400

The Bulwark Repulser Shields are large, intimidating power shields carried by terminators or elite marines. They are a popular choice for spearhead...

View full details
¥2,400 - ¥4,400
¥2,400 - ¥4,400
¥2,400 - ¥4,400
¥2,400

Angel Tears - Bulwark Repulser Shields

¥2,400 - ¥4,400
¥2,400 - ¥4,400
¥2,400 - ¥4,400
¥2,400

The Bulwark Repulser Shields are large, intimidating power shields carried by terminators or elite marines. They are a popular choice for spearhead...

View full details
¥2,400 - ¥4,400
¥2,400 - ¥4,400
¥2,400 - ¥4,400
¥2,400

Hounds of Tartarus - Trojan Power Shields (L&R)

¥2,400 - ¥5,100
¥2,400 - ¥5,100
¥2,400 - ¥5,100
¥2,400

The Trojan Power Shield was inspired by the ancient Greek shields carried by the infantry, sometimes referred to as a hoplon. Each set includes bot...

View full details
¥2,400 - ¥5,100
¥2,400 - ¥5,100
¥2,400 - ¥5,100
¥2,400

Chimalli - Round Terminator Shields

¥2,200 - ¥4,000
¥2,200 - ¥4,000
¥2,200 - ¥4,000
¥2,200

The Round Terminator Shields are the same size as our Round Power Shields but include a larger hand on the back to fit a Terminator model. Inspired...

View full details
¥2,200 - ¥4,000
¥2,200 - ¥4,000
¥2,200 - ¥4,000
¥2,200
Skota Vlka - Terminator Wall Shields (Right) 3d printed
Skota Vlka - Terminator Wall Shields (Right) 3d printed

Skota Vlka - Terminator Wall Shields (Right)

¥2,200 - ¥5,000
¥2,200 - ¥5,000
¥2,200 - ¥5,000
¥2,200

The Terminator Wall Shields are an enlarged variant of the standard marine boarding shield, making them an excellent alternative to the typical sto...

View full details
¥2,200 - ¥5,000
¥2,200 - ¥5,000
¥2,200 - ¥5,000
¥2,200

Kings Fist - Bulwark Repulser Shields

¥2,400 - ¥4,400
¥2,400 - ¥4,400
¥2,400 - ¥4,400
¥2,400

The Bulwark Repulser Shields are large, intimidating power shields carried by terminators or elite marines. They are a popular choice for spearhead...

View full details
¥2,400 - ¥4,400
¥2,400 - ¥4,400
¥2,400 - ¥4,400
¥2,400

Warmasters Eye - Bulwark Repulser Shields

¥2,400 - ¥4,400
¥2,400 - ¥4,400
¥2,400 - ¥4,400
¥2,400

The Bulwark Repulser Shields are large, intimidating power shields carried by terminators or elite marines. They are a popular choice for spearhead...

View full details
¥2,400 - ¥4,400
¥2,400 - ¥4,400
¥2,400 - ¥4,400
¥2,400
Storm Fist - Terminator Wall Shields 3d printed Small = 1 Shield (L)

Storm Fist - Terminator Wall Shields

¥2,200 - ¥3,400
¥2,200 - ¥3,400
¥2,200 - ¥3,400
¥2,200

The Terminator Wall Shields are an enlarged variant of the standard marine boarding shield, making them an excellent alternative to the typical sto...

View full details
¥2,200 - ¥3,400
¥2,200 - ¥3,400
¥2,200 - ¥3,400
¥2,200
Royal Guard - Terminator Wall Shields 3d printed Small = 1 Shield

Royal Guard - Terminator Wall Shields

¥2,200 - ¥3,400
¥2,200 - ¥3,400
¥2,200 - ¥3,400
¥2,200

The Terminator Wall Shields are an enlarged variant of the standard marine boarding shield, making them an excellent alternative to the typical sto...

View full details
¥2,200 - ¥3,400
¥2,200 - ¥3,400
¥2,200 - ¥3,400
¥2,200

Dragon Head - Bulwark Repulser Shields

¥2,400 - ¥4,400
¥2,400 - ¥4,400
¥2,400 - ¥4,400
¥2,400

The Bulwark Repulser Shields are large, intimidating power shields carried by terminators or elite marines. They are a popular choice for spearhead...

View full details
¥2,400 - ¥4,400
¥2,400 - ¥4,400
¥2,400 - ¥4,400
¥2,400

Evil Eye - Bulwark Repulser Shields

¥2,400 - ¥4,400
¥2,400 - ¥4,400
¥2,400 - ¥4,400
¥2,400

The Bulwark Repulser Shields are large, intimidating power shields carried by terminators or elite marines. They are a popular choice for spearhead...

View full details
¥2,400 - ¥4,400
¥2,400 - ¥4,400
¥2,400 - ¥4,400
¥2,400

Disciples of Caliban - Bulwark Repulser Shields

¥2,400 - ¥4,400
¥2,400 - ¥4,400
¥2,400 - ¥4,400
¥2,400

The Bulwark Repulser Shields are large, intimidating power shields carried by terminators or elite marines. They are a popular choice for spearhead...

View full details
¥2,400 - ¥4,400
¥2,400 - ¥4,400
¥2,400 - ¥4,400
¥2,400

Iron Heads - Bulwark Repulser Shields

¥2,400 - ¥4,400
¥2,400 - ¥4,400
¥2,400 - ¥4,400
¥2,400

The Bulwark Repulser Shields are large, intimidating power shields carried by terminators or elite marines. They are a popular choice for spearhead...

View full details
¥2,400 - ¥4,400
¥2,400 - ¥4,400
¥2,400 - ¥4,400
¥2,400

Featured collection

60x Maltese Cross : Shoulder Insignia pack 3d printed
60x Maltese Cross : Shoulder Insignia pack 3d printed

60x Maltese Cross : Shoulder Insignia pack

¥2,900 - ¥3,200
¥2,900 - ¥3,200
¥2,900 - ¥3,200
¥2,900

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥2,900 - ¥3,200
¥2,900 - ¥3,200
¥2,900 - ¥3,200
¥2,900
4x10 Squad Making MultiPack 3d printed
4x10 Squad Making MultiPack 3d printed

4x10 Squad Making MultiPack

¥3,800 - ¥4,200
¥3,800 - ¥4,200
¥3,800 - ¥4,200
¥3,800

This pack contains 10 Tactical, 10 Assault, 10 Devestator, and 10 Comand marks, designed to fit on shoulder-like or rounded area of your favorite m...

View full details
¥3,800 - ¥4,200
¥3,800 - ¥4,200
¥3,800 - ¥4,200
¥3,800
Xenos Hunters: Redemptor Honor Kit 3d printed

Xenos Hunters: Redemptor Honor Kit

¥2,400 - ¥3,300
¥2,400 - ¥3,300
¥2,400 - ¥3,300
¥2,400

These bits are designed to fit the Primaris Redemptor dreadnought model. They're meant to give your standard kit a unique look and provide raised e...

View full details
¥2,400 - ¥3,300
¥2,400 - ¥3,300
¥2,400 - ¥3,300
¥2,400
Prime Marine - Adjustable Arms (PM) 3d printed
Prime Marine - Adjustable Arms (PM) 3d printed

Prime Marine - Adjustable Arms (PM)

¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms)Medium sprue = 10 Sets (20 tot...

View full details
¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800
Deathwatch Set 1 : Shoulder Insignia pack 3d printed

Deathwatch Set 1 : Shoulder Insignia pack

¥3,200 - ¥3,500
¥3,200 - ¥3,500
¥3,200 - ¥3,500
¥3,200

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥3,200 - ¥3,500
¥3,200 - ¥3,500
¥3,200 - ¥3,500
¥3,200
60x Kings Fist - Shoulder Insignia pack 3d printed
60x Kings Fist - Shoulder Insignia pack 3d printed

60x Kings Fist - Shoulder Insignia pack

¥3,700 - ¥4,300
¥3,700 - ¥4,300
¥3,700 - ¥4,300
¥3,700

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥3,700 - ¥4,300
¥3,700 - ¥4,300
¥3,700 - ¥4,300
¥3,700

Antonis : Arch Battleknight Conversion Kit

¥5,900 - ¥11,400
¥5,900 - ¥11,400
¥5,900 - ¥11,400
¥5,900

This conversion kit is designed to fit a standard GW Nemesis Dreadknight model kit. It is not a full model, just parts to add to your model kit to ...

View full details
¥5,900 - ¥11,400
¥5,900 - ¥11,400
¥5,900 - ¥11,400
¥5,900
10x Base - Crested G:10 Prime Helmets 3d printed
10x Base - Crested G:10 Prime Helmets 3d printed

10x Base - Crested G:11 Prime Helmets

¥3,000 - ¥3,000
¥3,000
¥3,000 - ¥3,000
¥3,000

The G:11 Prime Helmets were designed by the free-blade artist, Cornivius. It was inspired by the new Primaries models with a subtle ancient greek h...

View full details
¥3,000 - ¥3,000
¥3,000
¥3,000 - ¥3,000
¥3,000
60x Ultra Legion - Shoulder Insignia pack 3d printed
60x Ultra Legion - Shoulder Insignia pack 3d printed

60x Ultra Legion - Shoulder Insignia pack

¥3,700 - ¥4,300
¥3,700 - ¥4,300
¥3,700 - ¥4,300
¥3,700

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥3,700 - ¥4,300
¥3,700 - ¥4,300
¥3,700 - ¥4,300
¥3,700
Gen:3 Iron - Adjustable Arms 3d printed
Gen:3 Iron - Adjustable Arms 3d printed Small = 5 Sets / Medium = 10 Sets

Gen:3 Iron - Adjustable Arms

¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms) Medium sprue = 10 Sets (20 to...

View full details
¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800
10x Deathwatch - T:1a Terminator Shoulders 3d printed
10x Deathwatch - T:1a Terminator Shoulders 3d printed

10x Xenos Hunters - 5th Ed. Firstborn Terminator Pads

¥3,300 - ¥3,500
¥3,300 - ¥3,500
¥3,300 - ¥3,500
¥3,300

The 5th Edition Terminator Series of shoulder pads was designed for the classic Indomitus or Chaos (Firstborn) Terminator models. These pads can be...

View full details
¥3,300 - ¥3,500
¥3,300 - ¥3,500
¥3,300 - ¥3,500
¥3,300
View all Collection
View all Collection
Shop collection