Skip to content
Insignias Full Models Conv.Kits Marines Head Swaps Weapons Shields Vehicle Parts Walkers Apparel

Monkey Resin 3

Monkey Resin 3 is a high-quality UV cured resin that will come attached to a support structure from the production process. The parts are however, pre-cleaned and ready for primer once removed. Use only super glue to adhere these parts to your models.

To remove the bits from their supports: submerge the whole assembly in water that is hot to the touch for 5 minutes. Use your fingernail to punch away several supports to create a starting point, and carefully peel your parts off of the remaining supports all together.

You can use a very fine-grit sandpaper if needed to smooth any surface or feature further. Always be sure to wear a mask when working around resin dust.

Kings Fist - Aquilas Boarding Shields (L) 3d printed

Kings Fist - Aquilas Tower Shields (L/R)

¥2,000 - ¥3,800
¥2,000 - ¥3,800
¥2,000 - ¥3,800
¥2,000

The Aquilas Tower Shields are large ornate shields great for Bladeguard Veterans, Honor Guards, or Assault Terminators. They are sold being held in...

View full details
¥2,000 - ¥3,800
¥2,000 - ¥3,800
¥2,000 - ¥3,800
¥2,000
Winged Sword - Aquilas Boarding Shields (L) 3d printed
Winged Sword - Aquilas Boarding Shields (L) 3d printed

Winged Sword - Aquilas Tower Shields (L/R)

¥2,000 - ¥3,600
¥2,000 - ¥3,600
¥2,000 - ¥3,600
¥2,000

The Aquilas Tower Shields are large ornate shields great for Bladeguard Veterans, Honor Guards, or Assault Terminators. They are sold being held in...

View full details
¥2,000 - ¥3,600
¥2,000 - ¥3,600
¥2,000 - ¥3,600
¥2,000

Maltese Cross - Aquilas Tower Shields (L/R)

¥2,000 - ¥3,600
¥2,000 - ¥3,600
¥2,000 - ¥3,600
¥2,000

The Aquilas Tower Shields are large ornate shields great for Bladeguard Veterans, Honor Guards, or Assault Terminators. They are sold being held in...

View full details
¥2,000 - ¥3,600
¥2,000 - ¥3,600
¥2,000 - ¥3,600
¥2,000
Shaggy Wolf - Terminator Wall Shields 3d printed Small = 1 Shield | Medium = 5 Shields | Large = 10 Shields

Shaggy Wolf - Terminator Wall Shields

¥1,700 - ¥4,800
¥1,700 - ¥4,800
¥1,700 - ¥4,800
¥1,700

NOTE: The Size Selection Equates to Quantity per Sprue, Not the Products’ Scale.Small sprue = 1 ShieldMedium sprue = 5 ShieldsLarge sprue = 10 Shie...

View full details
¥1,700 - ¥4,800
¥1,700 - ¥4,800
¥1,700 - ¥4,800
¥1,700

Ultra Legion - Aquilas Tower Shields (L/R)

¥2,000 - ¥7,200
¥2,000 - ¥7,200
¥2,000 - ¥7,200
¥2,000

The Aquilas Tower Shields are large ornate shields great for Bladeguard Veterans, Honor Guards, or Assault Terminators. They are sold being held in...

View full details
¥2,000 - ¥7,200
¥2,000 - ¥7,200
¥2,000 - ¥7,200
¥2,000

Blood Wing - Aquilas Tower Shields (L/R)

¥2,000 - ¥3,500
¥2,000 - ¥3,500
¥2,000 - ¥3,500
¥2,000

The Aquilas Tower Shields are large ornate shields great for Bladeguard Veterans, Honor Guards, or Assault Terminators. They are sold being held in...

View full details
¥2,000 - ¥3,500
¥2,000 - ¥3,500
¥2,000 - ¥3,500
¥2,000
Base - Aquilas Boarding Shields (L) 3d printed Small = 1 Shield | Medium = 5 Shields

Base - Aquilas Tower Shields (L/R)

¥1,400 - ¥3,500
¥1,400 - ¥3,500
¥1,400 - ¥3,500
¥1,400

The Aquilas Tower Shields are large ornate shields great for Bladeguard Veterans, Honor Guards, or Assault Terminators. They are sold being held in...

View full details
¥1,400 - ¥3,500
¥1,400 - ¥3,500
¥1,400 - ¥3,500
¥1,400

Death Angels - Aquilas Tower Shields (L/R)

¥2,000 - ¥3,900
¥2,000 - ¥3,900
¥2,000 - ¥3,900
¥2,000

The Aquilas Tower Shields are large ornate shields great for Bladeguard Veterans, Honor Guards, or Assault Terminators. They are sold being held in...

View full details
¥2,000 - ¥3,900
¥2,000 - ¥3,900
¥2,000 - ¥3,900
¥2,000

Emperor's Third - Aquilas Tower Shields (L/R)

¥2,000 - ¥3,700
¥2,000 - ¥3,700
¥2,000 - ¥3,700
¥2,000

The Aquilas Tower Shields are large ornate shields great for Bladeguard Veterans, Honor Guards, or Assault Terminators. They are sold being held in...

View full details
¥2,000 - ¥3,700
¥2,000 - ¥3,700
¥2,000 - ¥3,700
¥2,000
Royal Guard - Aquilas Boarding Shields (L) 3d printed

Royal Guard - Aquilas Tower Shields (L/R)

¥2,000 - ¥3,800
¥2,000 - ¥3,800
¥2,000 - ¥3,800
¥2,000

The Aquilas Tower Shields are large ornate shields great for Bladeguard Veterans, Honor Guards, or Assault Terminators. They are sold being held in...

View full details
¥2,000 - ¥3,800
¥2,000 - ¥3,800
¥2,000 - ¥3,800
¥2,000
5x ST Vronti Shields: Zeus (Insignia-Ready) 3d printed
5x ST Vronti Shields: Zeus (Insignia-Ready) 3d printed These arms will fit into any ST:1 Terminator torsos.

5x ST Vronti Shields: Zeus (Insignia-Ready)

¥2,600 - ¥4,100
¥2,600 - ¥4,100
¥2,600 - ¥4,100
¥2,600

These Left-handed Saturnus Terminator (ST) Power Shields have a flat surface in the center of the shield, that will allow you to brand them with on...

View full details
¥2,600 - ¥4,100
¥2,600 - ¥4,100
¥2,600 - ¥4,100
¥2,600

Angel Tears - Aquilas Tower Shields (L/R)

¥2,000 - ¥4,000
¥2,000 - ¥4,000
¥2,000 - ¥4,000
¥2,000

The Aquilas Tower Shields are large ornate shields great for Bladeguard Veterans, Honor Guards, or Assault Terminators. They are sold being held in...

View full details
¥2,000 - ¥4,000
¥2,000 - ¥4,000
¥2,000 - ¥4,000
¥2,000
5x ST Vronti Shields: Base (Insignia-Ready) 3d printed
5x ST Vronti Shields: Base (Insignia-Ready) 3d printed

5x ST Vronti Shields: Base (Insignia-Ready)

¥2,600 - ¥4,000
¥2,600 - ¥4,000
¥2,600 - ¥4,000
¥2,600

These Left-handed Saturnus Terminator (ST) Power Shields have a flat surface that will allow you to brand them with a flat vehicle insignia. The at...

View full details
¥2,600 - ¥4,000
¥2,600 - ¥4,000
¥2,600 - ¥4,000
¥2,600
Royal Guard - Terminator Wall Shields 3d printed Small = 1 Shield

Royal Guard - Terminator Wall Shields (Left)

¥2,100 - ¥3,800
¥2,100 - ¥3,800
¥2,100 - ¥3,800
¥2,100

The Terminator Wall Shields are a larger version of a standard marine boarding shield meant to be added to your favorite New or Classic Terminator ...

View full details
¥2,100 - ¥3,800
¥2,100 - ¥3,800
¥2,100 - ¥3,800
¥2,100

Xeno Hunters - Aquilas Tower Shields (L/R)

¥2,100 - ¥3,900
¥2,100 - ¥3,900
¥2,100 - ¥3,900
¥2,100

The Aquilas Tower Shields are large ornate shields great for Bladeguard Veterans, Honor Guards, or Assault Terminators. They are sold being held in...

View full details
¥2,100 - ¥3,900
¥2,100 - ¥3,900
¥2,100 - ¥3,900
¥2,100

Insignia-Ready : Aquilas Tower Shields (L/R)

¥2,000 - ¥3,800
¥2,000 - ¥3,800
¥2,000 - ¥3,800
¥2,000

The Aquilas Tower Shields are large ornate shields great for Bladeguard Veterans, Honor Guards, or Assault Terminators. They are sold being held in...

View full details
¥2,000 - ¥3,800
¥2,000 - ¥3,800
¥2,000 - ¥3,800
¥2,000

Royal Guard - Terminator Wall Shields (no hand)

¥2,100 - ¥3,800
¥2,100 - ¥3,800
¥2,100 - ¥3,800
¥2,100

The Terminator Wall Shields are a larger version of a standard marine boarding shield meant to be added to your favorite New or Classic Terminator ...

View full details
¥2,100 - ¥3,800
¥2,100 - ¥3,800
¥2,100 - ¥3,800
¥2,100

Featured collection

60x Maltese Cross : Shoulder Insignia pack 3d printed
60x Maltese Cross : Shoulder Insignia pack 3d printed

60x Maltese Cross : Shoulder Insignia pack

¥2,600 - ¥2,600
¥2,600
¥2,600 - ¥2,600
¥2,600

This insignia pack is designed to fit on any shoulder or rounded area of your favorite models. (YES, they fit the new marines) They are meant to pe...

View full details
¥2,600 - ¥2,600
¥2,600
¥2,600 - ¥2,600
¥2,600
4x10 Squad Making MultiPack 3d printed
4x10 Squad Making MultiPack 3d printed

4x10 Squad Making MultiPack

¥3,300 - ¥3,700
¥3,300 - ¥3,700
¥3,300 - ¥3,700
¥3,300

This pack contains 10 Tactical, 10 Assault, 10 Devestator, and 10 Comand marks, designed to fit on shoulder-like or rounded area of your favorite m...

View full details
¥3,300 - ¥3,700
¥3,300 - ¥3,700
¥3,300 - ¥3,700
¥3,300
Prime Marine - Adjustable Arms (PM) 3d printed
Prime Marine - Adjustable Arms (PM) 3d printed

Prime Marine - Adjustable Arms (PM)

¥2,600 - ¥3,900
¥2,600 - ¥3,900
¥2,600 - ¥3,900
¥2,600

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms)Medium sprue = 10 Sets (20 tot...

View full details
¥2,600 - ¥3,900
¥2,600 - ¥3,900
¥2,600 - ¥3,900
¥2,600
60x Kings Fist - Shoulder Insignia pack 3d printed
60x Kings Fist - Shoulder Insignia pack 3d printed

60x Kings Fist - Shoulder Insignia pack

¥2,800 - ¥3,000
¥2,800 - ¥3,000
¥2,800 - ¥3,000
¥2,800

This insignia pack is designed to fit on any shoulder or rounded area of your favorite models. (YES, they fit the new marines) They are meant to pe...

View full details
¥2,800 - ¥3,000
¥2,800 - ¥3,000
¥2,800 - ¥3,000
¥2,800
Xenos Hunters: Redemptor Honor Kit 3d printed
Xenos Hunters: Redemptor Honor Kit 3d printed

Xenos Hunters: Redemptor Honor Kit

¥2,200 - ¥3,100
¥2,200 - ¥3,100
¥2,200 - ¥3,100
¥2,200

These bits are designed to fit the Primaris Redemptor dreadnought model. They're meant to give your standard kit a unique look and provide raised e...

View full details
¥2,200 - ¥3,100
¥2,200 - ¥3,100
¥2,200 - ¥3,100
¥2,200

Antonis : Arch Battleknight Conversion Kit

¥5,500 - ¥10,700
¥5,500 - ¥10,700
¥5,500 - ¥10,700
¥5,500

This conversion kit is designed to fit a standard GW Nemesis Dreadknight model kit. It is not a full model, just parts to add to your model kit to ...

View full details
¥5,500 - ¥10,700
¥5,500 - ¥10,700
¥5,500 - ¥10,700
¥5,500
Deathwatch Set 1 : Shoulder Insignia pack 3d printed

Deathwatch Set 1 : Shoulder Insignia pack

¥3,100 - ¥3,200
¥3,100 - ¥3,200
¥3,100 - ¥3,200
¥3,100

This insignia pack is designed to fit on any shoulder or rounded area of your favorite models. (YES, they fit the new marines) They are meant to pe...

View full details
¥3,100 - ¥3,200
¥3,100 - ¥3,200
¥3,100 - ¥3,200
¥3,100
Gen:3 Iron - Adjustable Arms 3d printed
Gen:3 Iron - Adjustable Arms 3d printed Small = 5 Sets / Medium = 10 Sets

Gen:3 Iron - Adjustable Arms

¥2,600 - ¥3,900
¥2,600 - ¥3,900
¥2,600 - ¥3,900
¥2,600

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms) Medium sprue = 10 Sets (20 to...

View full details
¥2,600 - ¥3,900
¥2,600 - ¥3,900
¥2,600 - ¥3,900
¥2,600
60x Ultra Legion - Shoulder Insignia pack 3d printed
60x Ultra Legion - Shoulder Insignia pack 3d printed

60x Ultra Legion - Shoulder Insignia pack

¥2,600 - ¥2,800
¥2,600 - ¥2,800
¥2,600 - ¥2,800
¥2,600

This insignia pack is designed to fit on any shoulder or rounded area of your favorite models. (YES, they fit the new marines) They are meant to pe...

View full details
¥2,600 - ¥2,800
¥2,600 - ¥2,800
¥2,600 - ¥2,800
¥2,600
Gen:4 Maximus - Adjustable Arms 3d printed
Gen:4 Maximus - Adjustable Arms 3d printed

Gen:4 Maximus - Adjustable Arms

¥2,500 - ¥3,800
¥2,500 - ¥3,800
¥2,500 - ¥3,800
¥2,500

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms)Medium sprue = 10 Sets (20 tot...

View full details
¥2,500 - ¥3,800
¥2,500 - ¥3,800
¥2,500 - ¥3,800
¥2,500
10x Base - Crested G:10 Prime Helmets 3d printed
10x Base - Crested G:10 Prime Helmets 3d printed

10x Base - Crested G:11 Prime Helmets

¥2,800 - ¥2,800
¥2,800
¥2,800 - ¥2,800
¥2,800

The G:11 Prime Helmets were designed by the free-blade artist, Cornivius. It was inspired by the new Primaries models with a subtle ancient greek h...

View full details
¥2,800 - ¥2,800
¥2,800
¥2,800 - ¥2,800
¥2,800
View all Collection
View all Collection
Shop collection