Skip to content
Insignias Full Models Conv.Kits Marines Head Swaps Weapons Shields Vehicle Parts Walkers Apparel

Monkey Resin 3

Monkey Resin 3 is a high-quality UV cured resin that will come attached to a support structure from the production process. The parts are however, pre-cleaned and ready for primer once removed. Use only super glue to adhere these parts to your models.

To remove the bits from their supports: submerge the whole assembly in water that is hot to the touch for 5 minutes. Use your fingernail to punch away several supports to create a starting point, and carefully peel your parts off of the remaining supports all together.

You can use a very fine-grit sandpaper if needed to smooth any surface or feature further. Always be sure to wear a mask when working around resin dust.

Skota Vlka - Terminator Wall Shields (Left) 3d printed
Skota Vlka - Terminator Wall Shields (Left) 3d printed Small = 1 Shield | Medium = 5 Shields | Large = 10 Shields

Skota Vlka - Terminator Wall Shields (Left)

¥2,100 - ¥4,800
¥2,100 - ¥4,800
¥2,100 - ¥4,800
¥2,100

The Terminator Wall Shields are an enlarged variant of the standard marine boarding shield, making them an excellent alternative to the typical sto...

View full details
¥2,100 - ¥4,800
¥2,100 - ¥4,800
¥2,100 - ¥4,800
¥2,100

Riveted - Round Power Shields (L&R)

¥2,300 - ¥6,000
¥2,300 - ¥6,000
¥2,300 - ¥6,000
¥2,300

The Round Power Shield was inspired by the large round shields carried by the ancient Viking Warriors and Greek Hoplites. These sets include a even...

View full details
¥2,300 - ¥6,000
¥2,300 - ¥6,000
¥2,300 - ¥6,000
¥2,300

Warmasters Eye - Palatium Boarding Shields

¥2,200 - ¥3,800
¥2,200 - ¥3,800
¥2,200 - ¥3,800
¥2,200

All Palatium Boarding Shields are designed for left-handed use, allowing your 28mm marine models to create a strong, interlocked wall of firepower....

View full details
¥2,200 - ¥3,800
¥2,200 - ¥3,800
¥2,200 - ¥3,800
¥2,200

Hounds of Tartarus - Trojan Power Shields (L&R)

¥2,300 - ¥4,900
¥2,300 - ¥4,900
¥2,300 - ¥4,900
¥2,300

The Trojan Power Shield was inspired by the ancient Greek shields carried by the infantry, sometimes referred to as a hoplon. Each set includes bot...

View full details
¥2,300 - ¥4,900
¥2,300 - ¥4,900
¥2,300 - ¥4,900
¥2,300

Chimalli - Round Terminator Shields

¥2,100 - ¥3,800
¥2,100 - ¥3,800
¥2,100 - ¥3,800
¥2,100

The Round Terminator Shields are the same size as our Round Power Shields but include a larger hand on the back to fit a Terminator model. Inspired...

View full details
¥2,100 - ¥3,800
¥2,100 - ¥3,800
¥2,100 - ¥3,800
¥2,100

Shadow Vipers - Tactical Power Shields (Left)

¥2,100 - ¥5,600
¥2,100 - ¥5,600
¥2,100 - ¥5,600
¥2,100

Tactical Power Shields combine a contemporary riot shield with a traditional boarding shield, resulting in a sleeker and more stealthy appearance. ...

View full details
¥2,100 - ¥5,600
¥2,100 - ¥5,600
¥2,100 - ¥5,600
¥2,100
Skota Vlka - Terminator Wall Shields (Right) 3d printed
Skota Vlka - Terminator Wall Shields (Right) 3d printed

Skota Vlka - Terminator Wall Shields (Right)

¥2,100 - ¥4,800
¥2,100 - ¥4,800
¥2,100 - ¥4,800
¥2,100

The Terminator Wall Shields are an enlarged variant of the standard marine boarding shield, making them an excellent alternative to the typical sto...

View full details
¥2,100 - ¥4,800
¥2,100 - ¥4,800
¥2,100 - ¥4,800
¥2,100

Insignia-Ready : Aquilas Tower Shields (L/R)

¥2,200 - ¥4,000
¥2,200 - ¥4,000
¥2,200 - ¥4,000
¥2,200

The Aquilas Tower Shields are large ornate shields great for Bladeguard Veterans, Honor Guards, or Assault Terminators. They are sold being held in...

View full details
¥2,200 - ¥4,000
¥2,200 - ¥4,000
¥2,200 - ¥4,000
¥2,200
Blood Wing 2 - Power Kite Shields (Left) 3d printed
Blood Wing 2 - Power Kite Shields (Left) 3d printed

Blood Wing 2 - Power Kite Shields (Left)

¥2,100 - ¥3,200
¥2,100 - ¥3,200
¥2,100 - ¥3,200
¥2,100

The Power Kite Shield was inspired by the nobel shields carried by the classic medieval knight. Sold unpainted, they are designed to fit any of you...

View full details
¥2,100 - ¥3,200
¥2,100 - ¥3,200
¥2,100 - ¥3,200
¥2,100
Blank Crest:1 - Power Kite Shields (Left) 3d printed
Blank Crest:1 - Power Kite Shields (Left) 3d printed

Blank Crest:1 - Power Kite Shields (Left)

¥2,100 - ¥3,200
¥2,100 - ¥3,200
¥2,100 - ¥3,200
¥2,100

The Power Kite Shield was inspired by the nobel shields carried by the classic medieval knight. They are designed to fit any of your favorite 28mm ...

View full details
¥2,100 - ¥3,200
¥2,100 - ¥3,200
¥2,100 - ¥3,200
¥2,100
Wild Hunt - Round Power Shields (L&R) 3d printed

Wild Hunt - Round Power Shields (L&R)

¥2,400 - ¥6,600
¥2,400 - ¥6,600
¥2,400 - ¥6,600
¥2,400

The Round Power Shield was inspired by the large round shields carried by the ancient Viking Warriors and Greek Hoplites. These sets include a even...

View full details
¥2,400 - ¥6,600
¥2,400 - ¥6,600
¥2,400 - ¥6,600
¥2,400
Sun Wolves - Round Power Shields (L&R) 3d printed

Sun Wolves - Round Power Shields (L&R)

¥2,400 - ¥6,300
¥2,400 - ¥6,300
¥2,400 - ¥6,300
¥2,400

The Round Power Shield was inspired by the large round shields carried by the ancient Viking Warriors and Greek Hoplites. They are designed to fit ...

View full details
¥2,400 - ¥6,300
¥2,400 - ¥6,300
¥2,400 - ¥6,300
¥2,400
Riveted Boss - Round Power Shields (L&R) 3d printed

Riveted Boss - Round Power Shields (L&R)

¥2,300 - ¥6,000
¥2,300 - ¥6,000
¥2,300 - ¥6,000
¥2,300

The Round Power Shield was inspired by the large round shields carried by the ancient Viking Warriors and Greek Hoplites. These sets include a even...

View full details
¥2,300 - ¥6,000
¥2,300 - ¥6,000
¥2,300 - ¥6,000
¥2,300

Divine Word - Bulwark Repulser Shields

¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

The Bulwark Repulser Shields are large, intimidating power shields carried by terminators or elite marines. They are a popular choice for spearhead...

View full details
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

Angel Tears - Bulwark Repulser Shields

¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

The Bulwark Repulser Shields are large, intimidating power shields carried by terminators or elite marines. They are a popular choice for spearhead...

View full details
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

Warmasters Eye - Bulwark Repulser Shields

¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

The Bulwark Repulser Shields are large, intimidating power shields carried by terminators or elite marines. They are a popular choice for spearhead...

View full details
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

Warmasters Eye - Liberato Combat Shields (L&R)

¥2,500 - ¥4,800
¥2,500 - ¥4,800
¥2,500 - ¥4,800
¥2,500

Liberato-Pattern Combat Shields are a more compact and agile defensive guard favored by assault and close-quarters troops. These sets include an eq...

View full details
¥2,500 - ¥4,800
¥2,500 - ¥4,800
¥2,500 - ¥4,800
¥2,500
Storm Fist - Terminator Wall Shields 3d printed Small = 1 Shield (L)

Storm Fist - Terminator Wall Shields

¥2,100 - ¥3,200
¥2,100 - ¥3,200
¥2,100 - ¥3,200
¥2,100

The Terminator Wall Shields are an enlarged variant of the standard marine boarding shield, making them an excellent alternative to the typical sto...

View full details
¥2,100 - ¥3,200
¥2,100 - ¥3,200
¥2,100 - ¥3,200
¥2,100

Nightmare Legion - Marine Boarding Shields

¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500

Divine Word - Marine Boarding Shields

¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500

Skull Templars - Marine Boarding Shields

¥2,100 - ¥4,300
¥2,100 - ¥4,300
¥2,100 - ¥4,300
¥2,100

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥2,100 - ¥4,300
¥2,100 - ¥4,300
¥2,100 - ¥4,300
¥2,100
Royal Guard - Terminator Wall Shields 3d printed Small = 1 Shield

Royal Guard - Terminator Wall Shields

¥2,100 - ¥3,200
¥2,100 - ¥3,200
¥2,100 - ¥3,200
¥2,100

The Terminator Wall Shields are an enlarged variant of the standard marine boarding shield, making them an excellent alternative to the typical sto...

View full details
¥2,100 - ¥3,200
¥2,100 - ¥3,200
¥2,100 - ¥3,200
¥2,100
Winged Claw - Round Power Shields (L&R) 3d printed

Winged Claw - Round Power Shields (L&R)

¥2,400 - ¥6,300
¥2,400 - ¥6,300
¥2,400 - ¥6,300
¥2,400

The Round Power Shield was inspired by the large round shields carried by the ancient Viking Warriors and Greek Hoplites. These sets include a even...

View full details
¥2,400 - ¥6,300
¥2,400 - ¥6,300
¥2,400 - ¥6,300
¥2,400
Celestial Owls - Round Power Shields (L&R) 3d printed

Celestial Owls - Round Power Shields (L&R)

¥2,400 - ¥6,300
¥2,400 - ¥6,300
¥2,400 - ¥6,300
¥2,400

The Round Power Shield was inspired by the large round shields carried by the ancient Viking Warriors and Greek Hoplites. They are designed to fit ...

View full details
¥2,400 - ¥6,300
¥2,400 - ¥6,300
¥2,400 - ¥6,300
¥2,400

Dragon Head - Bulwark Repulser Shields

¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

The Bulwark Repulser Shields are large, intimidating power shields carried by terminators or elite marines. They are a popular choice for spearhead...

View full details
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

Evil Eye - Bulwark Repulser Shields

¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

The Bulwark Repulser Shields are large, intimidating power shields carried by terminators or elite marines. They are a popular choice for spearhead...

View full details
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

Burning Demon - Bulwark Repulser Shields

¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

The Bulwark Repulser Shields are large, intimidating power shields carried by terminators or elite marines. They are a popular choice for spearhead...

View full details
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

Emperors Third - Palatium Boarding Shields

¥2,200 - ¥3,800
¥2,200 - ¥3,800
¥2,200 - ¥3,800
¥2,200

All Palatium Boarding Shields are designed for left-handed use, allowing your 28mm marine models to create a strong, interlocked wall of firepower....

View full details
¥2,200 - ¥3,800
¥2,200 - ¥3,800
¥2,200 - ¥3,800
¥2,200

Machinists - Palatium Boarding Shields

¥2,200 - ¥3,800
¥2,200 - ¥3,800
¥2,200 - ¥3,800
¥2,200

All Palatium Boarding Shields are designed for left-handed use, allowing your 28mm marine models to create a strong, interlocked wall of firepower....

View full details
¥2,200 - ¥3,800
¥2,200 - ¥3,800
¥2,200 - ¥3,800
¥2,200

Nightmare Legion - Palatium Boarding Shields

¥2,200 - ¥3,800
¥2,200 - ¥3,800
¥2,200 - ¥3,800
¥2,200

All Palatium Boarding Shields are designed for left-handed use, allowing your 28mm marine models to create a strong, interlocked wall of firepower....

View full details
¥2,200 - ¥3,800
¥2,200 - ¥3,800
¥2,200 - ¥3,800
¥2,200

Insignia-Ready - Bulwark Repulser Shields

¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

The Bulwark Repulser Shields are large, intimidating power shields carried by terminators or elite marines. They are a popular choice for spearhead...

View full details
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

Blank - Liberato Combat Shields (L&R)

¥2,500 - ¥4,800
¥2,500 - ¥4,800
¥2,500 - ¥4,800
¥2,500

Liberato-Pattern Combat Shields are a more compact and agile defensive guard favored by assault and close-quarters troops. These sets include an eq...

View full details
¥2,500 - ¥4,800
¥2,500 - ¥4,800
¥2,500 - ¥4,800
¥2,500

Wolf Rampant - Round Terminator Shields

¥1,600 - ¥4,100
¥1,600 - ¥4,100
¥1,600 - ¥4,100
¥1,600

The Round Terminator Shields are the same size as our Round Power Shields but include a larger hand on the back to fit a Terminator model. Inspired...

View full details
¥1,600 - ¥4,100
¥1,600 - ¥4,100
¥1,600 - ¥4,100
¥1,600

Runic Wolf Rampant - Round Terminator Shields

¥1,600 - ¥4,100
¥1,600 - ¥4,100
¥1,600 - ¥4,100
¥1,600

The Round Terminator Shields are the same size as our Round Power Shields but include a larger hand on the back to fit a Terminator model. Inspired...

View full details
¥1,600 - ¥4,100
¥1,600 - ¥4,100
¥1,600 - ¥4,100
¥1,600
11th Void Drakes - Terminator Wall Shields 3d printed Small = 1 Shield | Medium = 5 Shields

11th Void Drakes - Terminator Wall Shields

¥2,100 - ¥3,200
¥2,100 - ¥3,200
¥2,100 - ¥3,200
¥2,100

The Terminator Wall Shields are an enlarged variant of the standard marine boarding shield, making them an excellent alternative to the typical sto...

View full details
¥2,100 - ¥3,200
¥2,100 - ¥3,200
¥2,100 - ¥3,200
¥2,100
Devil Rays - Marine Boarding Shields 3d printed
Devil Rays - Marine Boarding Shields 3d printed

Devil Rays - Marine Boarding Shields

¥2,200 - ¥4,300
¥2,200 - ¥4,300
¥2,200 - ¥4,300
¥2,200

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥2,200 - ¥4,300
¥2,200 - ¥4,300
¥2,200 - ¥4,300
¥2,200

Brand Sabrewulf - Round Power Shields

¥2,100 - ¥6,400
¥2,100 - ¥6,400
¥2,100 - ¥6,400
¥2,100

In memory of Brand Shovlar, a True Son of Fenris immortalized in official lore as Brand Sabrewulf. A man can never die os long as his name is spoke...

View full details
¥2,100 - ¥6,400
¥2,100 - ¥6,400
¥2,100 - ¥6,400
¥2,100

Storm Scars - Marine Boarding Shields

¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500

Warhounds - Marine Boarding Shields

¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500

Burning Demon - Marine Boarding Shields

¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500 - ¥4,300
¥1,500

Shadow Vipers - Round Power Shields (L&R)

¥2,400 - ¥6,100
¥2,400 - ¥6,100
¥2,400 - ¥6,100
¥2,400

The Round Power Shield was inspired by the large round shields carried by the ancient Viking Warriors and Greek Hoplites. These sets include a even...

View full details
¥2,400 - ¥6,100
¥2,400 - ¥6,100
¥2,400 - ¥6,100
¥2,400
Emperor'sThird - Round Power Shields (L&R) 3d printed

Emperor's Third - Round Power Shields (L&R)

¥2,400 - ¥6,600
¥2,400 - ¥6,600
¥2,400 - ¥6,600
¥2,400

The Round Power Shield was inspired by the large round shields carried by the ancient Viking Warriors and Greek Hoplites. These sets include a even...

View full details
¥2,400 - ¥6,600
¥2,400 - ¥6,600
¥2,400 - ¥6,600
¥2,400
Four Point - Round Power Shields (L&R) 3d printed

Four Point - Round Power Shields (L&R)

¥2,300 - ¥5,800
¥2,300 - ¥5,800
¥2,300 - ¥5,800
¥2,300

The Round Power Shield was inspired by the large round shields carried by the ancient Viking Warriors and Greek Hoplites. These sets include a even...

View full details
¥2,300 - ¥5,800
¥2,300 - ¥5,800
¥2,300 - ¥5,800
¥2,300
Clan Amphisbaena - Palatium Boarding Shields 2 3d printed
Clan Amphisbaena - Palatium Boarding Shields 2 3d printed

Clan Amphisbaena - Palatium Boarding Shields 2

¥2,200 - ¥6,000
¥2,200 - ¥6,000
¥2,200 - ¥6,000
¥2,200

All Palatium Boarding Shields are designed for left-handed use, allowing your 28mm marine models to create a strong, interlocked wall of firepower....

View full details
¥2,200 - ¥6,000
¥2,200 - ¥6,000
¥2,200 - ¥6,000
¥2,200

Nightmare Legion - Liberato Combat Shields (L&R)

¥2,500 - ¥4,800
¥2,500 - ¥4,800
¥2,500 - ¥4,800
¥2,500

Liberato-Pattern Combat Shields are a more compact and agile defensive guard favored by assault and close-quarters troops. These sets include an eq...

View full details
¥2,500 - ¥4,800
¥2,500 - ¥4,800
¥2,500 - ¥4,800
¥2,500

Night Wolves - Bulwark Repulser Shields

¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

The Bulwark Repulser Shields are large, intimidating power shields carried by terminators or elite marines. They are a popular choice for spearhead...

View full details
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

Moon Wolves - Bulwark Repulser Shields

¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

The Bulwark Repulser Shields are large, intimidating power shields carried by terminators or elite marines. They are a popular choice for spearhead...

View full details
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

Wolf Rampant - Bulwark Repulser Shields

¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

The Bulwark Repulser Shields are large, intimidating power shields carried by terminators or elite marines. They are a popular choice for spearhead...

View full details
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

Featured collection

60x Maltese Cross : Shoulder Insignia pack 3d printed
60x Maltese Cross : Shoulder Insignia pack 3d printed

60x Maltese Cross : Shoulder Insignia pack

¥2,700 - ¥3,000
¥2,700 - ¥3,000
¥2,700 - ¥3,000
¥2,700

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥2,700 - ¥3,000
¥2,700 - ¥3,000
¥2,700 - ¥3,000
¥2,700
4x10 Squad Making MultiPack 3d printed
4x10 Squad Making MultiPack 3d printed

4x10 Squad Making MultiPack

¥3,700 - ¥4,000
¥3,700 - ¥4,000
¥3,700 - ¥4,000
¥3,700

This pack contains 10 Tactical, 10 Assault, 10 Devestator, and 10 Comand marks, designed to fit on shoulder-like or rounded area of your favorite m...

View full details
¥3,700 - ¥4,000
¥3,700 - ¥4,000
¥3,700 - ¥4,000
¥3,700
Prime Marine - Adjustable Arms (PM) 3d printed
Prime Marine - Adjustable Arms (PM) 3d printed

Prime Marine - Adjustable Arms (PM)

¥2,700 - ¥4,000
¥2,700 - ¥4,000
¥2,700 - ¥4,000
¥2,700

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms)Medium sprue = 10 Sets (20 tot...

View full details
¥2,700 - ¥4,000
¥2,700 - ¥4,000
¥2,700 - ¥4,000
¥2,700
Xenos Hunters: Redemptor Honor Kit 3d printed

Xenos Hunters: Redemptor Honor Kit

¥2,300 - ¥3,200
¥2,300 - ¥3,200
¥2,300 - ¥3,200
¥2,300

These bits are designed to fit the Primaris Redemptor dreadnought model. They're meant to give your standard kit a unique look and provide raised e...

View full details
¥2,300 - ¥3,200
¥2,300 - ¥3,200
¥2,300 - ¥3,200
¥2,300
Deathwatch Set 1 : Shoulder Insignia pack 3d printed

Deathwatch Set 1 : Shoulder Insignia pack

¥3,000 - ¥3,400
¥3,000 - ¥3,400
¥3,000 - ¥3,400
¥3,000

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥3,000 - ¥3,400
¥3,000 - ¥3,400
¥3,000 - ¥3,400
¥3,000
60x Kings Fist - Shoulder Insignia pack 3d printed
60x Kings Fist - Shoulder Insignia pack 3d printed

60x Kings Fist - Shoulder Insignia pack

¥3,500 - ¥4,100
¥3,500 - ¥4,100
¥3,500 - ¥4,100
¥3,500

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥3,500 - ¥4,100
¥3,500 - ¥4,100
¥3,500 - ¥4,100
¥3,500

Antonis : Arch Battleknight Conversion Kit

¥5,700 - ¥11,100
¥5,700 - ¥11,100
¥5,700 - ¥11,100
¥5,700

This conversion kit is designed to fit a standard GW Nemesis Dreadknight model kit. It is not a full model, just parts to add to your model kit to ...

View full details
¥5,700 - ¥11,100
¥5,700 - ¥11,100
¥5,700 - ¥11,100
¥5,700
60x Ultra Legion - Shoulder Insignia pack 3d printed
60x Ultra Legion - Shoulder Insignia pack 3d printed

60x Ultra Legion - Shoulder Insignia pack

¥3,500 - ¥4,100
¥3,500 - ¥4,100
¥3,500 - ¥4,100
¥3,500

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥3,500 - ¥4,100
¥3,500 - ¥4,100
¥3,500 - ¥4,100
¥3,500
10x Base - Crested G:10 Prime Helmets 3d printed
10x Base - Crested G:10 Prime Helmets 3d printed

10x Base - Crested G:11 Prime Helmets

¥2,800 - ¥2,800
¥2,800
¥2,800 - ¥2,800
¥2,800

The G:11 Prime Helmets were designed by the free-blade artist, Cornivius. It was inspired by the new Primaries models with a subtle ancient greek h...

View full details
¥2,800 - ¥2,800
¥2,800
¥2,800 - ¥2,800
¥2,800
Gen:3 Iron - Adjustable Arms 3d printed
Gen:3 Iron - Adjustable Arms 3d printed Small = 5 Sets / Medium = 10 Sets

Gen:3 Iron - Adjustable Arms

¥2,700 - ¥4,100
¥2,700 - ¥4,100
¥2,700 - ¥4,100
¥2,700

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms) Medium sprue = 10 Sets (20 to...

View full details
¥2,700 - ¥4,100
¥2,700 - ¥4,100
¥2,700 - ¥4,100
¥2,700
10x Deathwatch - T:1a Terminator Shoulders 3d printed
10x Deathwatch - T:1a Terminator Shoulders 3d printed

10x Xenos Hunters - T:1a Terminator Shoulders

¥3,200 - ¥3,300
¥3,200 - ¥3,300
¥3,200 - ¥3,300
¥3,200

The Terminator Series 1 style of shoulder pads are inspired to represent the Indomitus pattern Terminator armor (Standard). Sold unpainted, each pa...

View full details
¥3,200 - ¥3,300
¥3,200 - ¥3,300
¥3,200 - ¥3,300
¥3,200
View all Collection
View all Collection
Shop collection