Skip to content
Insignias Full Models Conv.Kits Marines Head Swaps Weapons Shields Vehicle Parts Walkers Apparel

Monkey Resin 3

Monkey Resin 3 is a high-quality UV cured resin that will come attached to a support structure from the production process. The parts are however, pre-cleaned and ready for primer once removed. Use only super glue to adhere these parts to your models.

To remove the bits from their supports: submerge the whole assembly in water that is hot to the touch for 5 minutes. Use your fingernail to punch away several supports to create a starting point, and carefully peel your parts off of the remaining supports all together.

You can use a very fine-grit sandpaper if needed to smooth any surface or feature further. Always be sure to wear a mask when working around resin dust.

10x blank - Marine Boarding Shields 3d printed
10x blank - Marine Boarding Shields 3d printed

Blank - Marine Boarding Shields

¥2,300 - ¥4,500
¥2,300 - ¥4,500
¥2,300 - ¥4,500
¥2,300

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥2,300 - ¥4,500
¥2,300 - ¥4,500
¥2,300 - ¥4,500
¥2,300
Xenos Hunters Elite - Marine Boarding Shields 3d printed Small = 1 Shield | Medium = 5 Shields | Large = 10 Shields

Xenos Hunters Elite - Marine Boarding Shields

¥2,300 - ¥4,500
¥2,300 - ¥4,500
¥2,300 - ¥4,500
¥2,300

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥2,300 - ¥4,500
¥2,300 - ¥4,500
¥2,300 - ¥4,500
¥2,300
10x Kings Fist 2 - Marine Boarding Shields 3d printed

Kings Fist 2 - Marine Boarding Shields

¥2,500 - ¥4,500
¥2,500 - ¥4,500
¥2,500 - ¥4,500
¥2,500

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥2,500 - ¥4,500
¥2,500 - ¥4,500
¥2,500 - ¥4,500
¥2,500
Studded Chordata Jetpack (SM) 3d printed
Studded Chordata Jetpack (SM) 3d printed

Studded Chordata Jetpack (SM)

¥2,300 - ¥8,600
¥2,300 - ¥8,600
¥2,300 - ¥8,600
¥2,300

The Chordata Jetpack (SM) is a custom-designed jetpack meant to replace the backpacks of classic marine models to give them a unique profile on the...

View full details
¥2,300 - ¥8,600
¥2,300 - ¥8,600
¥2,300 - ¥8,600
¥2,300

Kings Fists - Marine Boarding Shields

¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600
IronHeads- Marine Boarding Shields w/Hand 3d printed Small = 1 Shield

IronHeads- Marine Boarding Shields w/Hand

¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600
Hazard Stripes - Marine Boarding Shields 3d printed Small = 1 Shield

Hazard Stripes - Marine Boarding Shields

¥2,300 - ¥4,500
¥2,300 - ¥4,500
¥2,300 - ¥4,500
¥2,300

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥2,300 - ¥4,500
¥2,300 - ¥4,500
¥2,300 - ¥4,500
¥2,300
Vehicle Insignia-Ready: Marine Boarding Shields 3d printed Designed to work with my Vehicle Insignia Sets
Vehicle Insignia-Ready: Marine Boarding Shields 3d printed Small = 1 Shield

Vehicle Insignia-Ready: Marine Boarding Shields

¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

The Marine Boarding shields are all left-handed, allowing your favorite 28mm marine models to interlock into a reinforced wall of firepower. These ...

View full details
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300 - ¥4,200
¥2,300

Knight Legion - Marine Boarding Shields

¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600

Mech Hand Legion - Marine Boarding Shields

¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600

Tribal Mako - Marine Boarding Shields

¥2,300 - ¥4,500
¥2,300 - ¥4,500
¥2,300 - ¥4,500
¥2,300

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥2,300 - ¥4,500
¥2,300 - ¥4,500
¥2,300 - ¥4,500
¥2,300
Hydra Legion- Marine Boarding Shields w/Hand 3d printed Small = 1 Shield

Hydra Legion- Marine Boarding Shields

¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600
Underslung Laser Cannon 3d printed

Underslung Laser Cannon

¥2,300 - ¥6,800
¥2,300 - ¥6,800
¥2,300 - ¥6,800
¥2,300

Inspired by the heavy weapons wielded by Devastator squads and Chaos Havocs, these underslung custom designed weapons are sold unpainted and design...

View full details
¥2,300 - ¥6,800
¥2,300 - ¥6,800
¥2,300 - ¥6,800
¥2,300
10x Ultra Legion - Marine Boarding Shields 3d printed

Ultra Legion - Marine Boarding Shields

¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600
Dragon Head - Marine Boarding Shields 3d printed Small = 1 Shield

Dragon Head - Marine Boarding Shields

¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600

5x Saturnus Terminator Mk:2 Crusader Squad

¥6,600 - ¥7,400
¥6,600 - ¥7,400
¥6,600 - ¥7,400
¥6,600

The Mk2 Saturnus-Pattern Terminator Armor was designed to harken back to the Darker Age of the Galactic Empire. Don't be fooled, they might look vi...

View full details
¥6,600 - ¥7,400
¥6,600 - ¥7,400
¥6,600 - ¥7,400
¥6,600
Blank Rimmed - Power Kite Shields (Left) 3d printed
Blank Rimmed - Power Kite Shields (Left) 3d printed

Blank Rimmed - Power Kite Shields (Left)

¥2,300 - ¥3,300
¥2,300 - ¥3,300
¥2,300 - ¥3,300
¥2,300

The Power Kite Shield was inspired by the noble shields carried by the classic medieval knight. They are designed to fit any of your favorite 28mm ...

View full details
¥2,300 - ¥3,300
¥2,300 - ¥3,300
¥2,300 - ¥3,300
¥2,300

Templar Fist - Marine Boarding Shields

¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600
Shaggy Wolf - Marine Boarding Shields 3d printed Small = 1 Shield | Medium = 5 Shields | Large = 10 Shields

Shaggy Wolf - Marine Boarding Shields

¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600
Underslug Missle Launcher 3d printed
Underslug Missle Launcher 3d printed

Underslung Salvostrike Missile Launcher

¥2,300 - ¥8,300
¥2,300 - ¥8,300
¥2,300 - ¥8,300
¥2,300

Our Underslung Heavy Weapons are inspired by the powerful and specialized weapons used by the Heavy Support Squads, Devastators, and Havocs. These ...

View full details
¥2,300 - ¥8,300
¥2,300 - ¥8,300
¥2,300 - ¥8,300
¥2,300
Maori Ta Moko - Marine Boarding Shields 3d printed Small = 1 Shield

Maori Ta Moko - Marine Boarding Shields

¥2,300 - ¥4,500
¥2,300 - ¥4,500
¥2,300 - ¥4,500
¥2,300

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥2,300 - ¥4,500
¥2,300 - ¥4,500
¥2,300 - ¥4,500
¥2,300

5x Saturnus Terminator Mk:2 Invader Squad

¥5,800 - ¥5,800
¥5,800
¥5,800 - ¥5,800
¥5,800

The Mk1 Saturnus-Pattern Terminator Armor was designed to harken back to the Darker Age of the Galactic Empire. Don't be fooled, they might look vi...

View full details
¥5,800 - ¥5,800
¥5,800
¥5,800 - ¥5,800
¥5,800
Dragon Blaze - Marine Boarding Shields 3d printed Small = 1 Shield

Dragon Blaze - Marine Boarding Shields

¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600
10x Sorcerer Sun - Marine Boarding Shields 3d printed

Sorcerer Sun - Marine Boarding Shields

¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600
Blood Wing Elite - Marine Boarding Shields 3d printed
Blood Wing Elite - Marine Boarding Shields 3d printed

Blood Wing Elite - Marine Boarding Shields

¥2,300 - ¥4,500
¥2,300 - ¥4,500
¥2,300 - ¥4,500
¥2,300

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥2,300 - ¥4,500
¥2,300 - ¥4,500
¥2,300 - ¥4,500
¥2,300

Winged Claw - Marine Boarding Shields

¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600
Studded - Palatium Boarding Shields 3d printed

Studded - Palatium Boarding Shields

¥2,300 - ¥6,200
¥2,300 - ¥6,200
¥2,300 - ¥6,200
¥2,300

All Palatium Boarding Shields are designed for left-handed use, allowing your 28mm marine models to create a strong, interlocked wall of firepower....

View full details
¥2,300 - ¥6,200
¥2,300 - ¥6,200
¥2,300 - ¥6,200
¥2,300

Spiked - Chordero Jetpacks (PM)

¥1,600 - ¥7,800
¥1,600 - ¥7,800
¥1,600 - ¥7,800
¥1,600

The Chordero Jetpack (PM) is a custom-designed jetpack that is meant to replace the backpacks of the new “Prime” marine models to turn it into an a...

View full details
¥1,600 - ¥7,800
¥1,600 - ¥7,800
¥1,600 - ¥7,800
¥1,600
Blank Knight - Power Kite Shields (Left) 3d printed
Blank Knight - Power Kite Shields (Left) 3d printed

Blank Knight - Power Kite Shields (Left)

¥2,300 - ¥3,300
¥2,300 - ¥3,300
¥2,300 - ¥3,300
¥2,300

The Power Kite Shield was inspired by the nobel shields carried by the classic medieval knight. They are designed to fit any of your favorite 28mm ...

View full details
¥2,300 - ¥3,300
¥2,300 - ¥3,300
¥2,300 - ¥3,300
¥2,300
Kings Fist - Palatium Boarding Shields 3d printed

Kings Fist - Palatium Boarding Shields

¥2,300 - ¥6,200
¥2,300 - ¥6,200
¥2,300 - ¥6,200
¥2,300

All Palatium Boarding Shields are designed for left-handed use, allowing your 28mm marine models to create a strong, interlocked wall of firepower....

View full details
¥2,300 - ¥6,200
¥2,300 - ¥6,200
¥2,300 - ¥6,200
¥2,300

Studded - Chordero Jetpacks (PM)

¥1,600 - ¥7,800
¥1,600 - ¥7,800
¥1,600 - ¥7,800
¥1,600

The Chordero Jetpack (PM) is a custom-designed jetpack that is meant to replace the backpacks of the new “Prime” marine models to turn it into an a...

View full details
¥1,600 - ¥7,800
¥1,600 - ¥7,800
¥1,600 - ¥7,800
¥1,600

5x Saturnus Terminator Mk:1 Crusader Squad

¥6,600 - ¥7,400
¥6,600 - ¥7,400
¥6,600 - ¥7,400
¥6,600

The Mk1 Saturnus-Pattern Terminator Armor was designed to harken back to the Darker Age of the Galactic Empire. Don't be fooled, they might look vi...

View full details
¥6,600 - ¥7,400
¥6,600 - ¥7,400
¥6,600 - ¥7,400
¥6,600
Cybornaut - Marine Boarding Shields 3d printed Small = 1 Shield

Cybornaut - Marine Boarding Shields

¥2,300 - ¥4,500
¥2,300 - ¥4,500
¥2,300 - ¥4,500
¥2,300

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥2,300 - ¥4,500
¥2,300 - ¥4,500
¥2,300 - ¥4,500
¥2,300
Base - Palatium Boarding Shields 3d printed

Base - Palatium Boarding Shields

¥2,300 - ¥6,200
¥2,300 - ¥6,200
¥2,300 - ¥6,200
¥2,300

All Palatium Boarding Shields are designed for left-handed use, allowing your 28mm marine models to create a strong, interlocked wall of firepower....

View full details
¥2,300 - ¥6,200
¥2,300 - ¥6,200
¥2,300 - ¥6,200
¥2,300
Blank Crest:2 - Power Kite Shields (Left) 3d printed
Blank Crest:2 - Power Kite Shields (Left) 3d printed

Blank Crest:2 - Power Kite Shields (Left)

¥2,300 - ¥3,300
¥2,300 - ¥3,300
¥2,300 - ¥3,300
¥2,300

The Power Kite Shield was inspired by the nobel shields carried by the classic medieval knight. They are designed to fit any of your favorite 28mm ...

View full details
¥2,300 - ¥3,300
¥2,300 - ¥3,300
¥2,300 - ¥3,300
¥2,300
5x ST:1 Right Blitz-Bolter: Saturnine 3d printed
5x ST:1 Right Blitz-Bolter: Saturnine 3d printed These arms will fit into any ST:1 Terminator torsos.

5x ST:1 Right Blitz-Bolter: Saturnine

¥2,600 - ¥3,500
¥2,600 - ¥3,500
¥2,600 - ¥3,500
¥2,600

These Saturnus Terminator (ST) Arms were designed and sculpted by the free-blade artist, KarnageKing. Its styling harkens back to a Darker Age of t...

View full details
¥2,600 - ¥3,500
¥2,600 - ¥3,500
¥2,600 - ¥3,500
¥2,600

Phobos Battle Tank : Side Sponson Kits

¥4,100 - ¥4,100
¥4,100
¥4,100 - ¥4,100
¥4,100

The Phobos Battle Tank Side Sponson kit is compatible with a standard Rhino model. Each weapon mount is inserted into the side door holes. This can...

View full details
¥4,100 - ¥4,100
¥4,100
¥4,100 - ¥4,100
¥4,100

Greek Bull - Marine Boarding Shields

¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600
10x Stripped Flat Insignia-Ready: Boarding Shields 3d printed
10x Stripped Flat Insignia-Ready: Boarding Shields 3d printed

10x Stripped Flat Insignia-Ready: Boarding Shields

¥3,500 - ¥4,500
¥3,500 - ¥4,500
¥3,500 - ¥4,500
¥3,500

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥3,500 - ¥4,500
¥3,500 - ¥4,500
¥3,500 - ¥4,500
¥3,500
Blood Wing - Marine Boarding Shields 3d printed
Blood Wing - Marine Boarding Shields 3d printed

Blood Wing - Marine Boarding Shields

¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600

Maltese Cross - Marine Boarding Shields

¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600

Underslung Deathweaver Missile Launcher

¥2,900 - ¥8,400
¥2,900 - ¥8,400
¥2,900 - ¥8,400
¥2,900

Our Underslung Heavy Weapons are inspired by the powerful and specialized weapons used by the Heavy Support Squads, Devastators, and Havocs. These ...

View full details
¥2,900 - ¥8,400
¥2,900 - ¥8,400
¥2,900 - ¥8,400
¥2,900

Base : Phobos Battle Tank Turret Set

¥4,600 - ¥4,600
¥4,600
¥4,600 - ¥4,600
¥4,600

The Phobos Battle Tank set includes a Twin Laser and Autcannon main weapon option. It's designed to represent a Deimos Pattern Predator with some n...

View full details
¥4,600 - ¥4,600
¥4,600
¥4,600 - ¥4,600
¥4,600

Emperors Third - Marine Boarding Shields

¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600

Argonaut: Cyreina of Aktay

¥2,500 - ¥3,200
¥2,500 - ¥3,200
¥2,500 - ¥3,200
¥2,500

Hero of the Heresy : Cyreina of Aktay, also know as the Blessed Lady, was an acolyte of the occult and a valuable ally to the Argonauts. Her guidan...

View full details
¥2,500 - ¥3,200
¥2,500 - ¥3,200
¥2,500 - ¥3,200
¥2,500
Hav-Launcher - R2 Hatch Turrets 3d printed
Hav-Launcher - R2 Hatch Turrets 3d printed

Hav-Launcher - R2 Hatch Turrets

¥2,600 - ¥11,900
¥2,600 - ¥11,900
¥2,600 - ¥11,900
¥2,600

These Hatch Turrets are designed to fit into the hatches of a standard troop tank, or similar size personal access point. Our customers have found ...

View full details
¥2,600 - ¥11,900
¥2,600 - ¥11,900
¥2,600 - ¥11,900
¥2,600

World Wreckers - Marine Boarding Shields

¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600

The Standard Marine Boarding Shields are all left-handed, enabling your favorite 28mm marine models to form a strong, interconnected wall of firepo...

View full details
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600
Ultra Legion - Palatium Boarding Shields 3d printed

Ultra Legion - Palatium Boarding Shields

¥2,300 - ¥6,200
¥2,300 - ¥6,200
¥2,300 - ¥6,200
¥2,300

All Palatium Boarding Shields are designed for left-handed use, allowing your 28mm marine models to create a strong, interlocked wall of firepower....

View full details
¥2,300 - ¥6,200
¥2,300 - ¥6,200
¥2,300 - ¥6,200
¥2,300

Featured collection

60x Maltese Cross : Shoulder Insignia pack 3d printed
60x Maltese Cross : Shoulder Insignia pack 3d printed

60x Maltese Cross : Shoulder Insignia pack

¥2,900 - ¥3,200
¥2,900 - ¥3,200
¥2,900 - ¥3,200
¥2,900

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥2,900 - ¥3,200
¥2,900 - ¥3,200
¥2,900 - ¥3,200
¥2,900
4x10 Squad Making MultiPack 3d printed
4x10 Squad Making MultiPack 3d printed

4x10 Squad Making MultiPack

¥3,800 - ¥4,100
¥3,800 - ¥4,100
¥3,800 - ¥4,100
¥3,800

This pack contains 10 Tactical, 10 Assault, 10 Devestator, and 10 Comand marks, designed to fit on shoulder-like or rounded area of your favorite m...

View full details
¥3,800 - ¥4,100
¥3,800 - ¥4,100
¥3,800 - ¥4,100
¥3,800
Xenos Hunters: Redemptor Honor Kit 3d printed

Xenos Hunters: Redemptor Honor Kit

¥2,400 - ¥3,300
¥2,400 - ¥3,300
¥2,400 - ¥3,300
¥2,400

These bits are designed to fit the Primaris Redemptor dreadnought model. They're meant to give your standard kit a unique look and provide raised e...

View full details
¥2,400 - ¥3,300
¥2,400 - ¥3,300
¥2,400 - ¥3,300
¥2,400
Prime Marine - Adjustable Arms (PM) 3d printed
Prime Marine - Adjustable Arms (PM) 3d printed

Prime Marine - Adjustable Arms (PM)

¥2,800 - ¥4,100
¥2,800 - ¥4,100
¥2,800 - ¥4,100
¥2,800

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms)Medium sprue = 10 Sets (20 tot...

View full details
¥2,800 - ¥4,100
¥2,800 - ¥4,100
¥2,800 - ¥4,100
¥2,800
Deathwatch Set 1 : Shoulder Insignia pack 3d printed

Deathwatch Set 1 : Shoulder Insignia pack

¥3,200 - ¥3,500
¥3,200 - ¥3,500
¥3,200 - ¥3,500
¥3,200

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥3,200 - ¥3,500
¥3,200 - ¥3,500
¥3,200 - ¥3,500
¥3,200
60x Kings Fist - Shoulder Insignia pack 3d printed
60x Kings Fist - Shoulder Insignia pack 3d printed

60x Kings Fist - Shoulder Insignia pack

¥3,700 - ¥4,300
¥3,700 - ¥4,300
¥3,700 - ¥4,300
¥3,700

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥3,700 - ¥4,300
¥3,700 - ¥4,300
¥3,700 - ¥4,300
¥3,700

Antonis : Arch Battleknight Conversion Kit

¥5,900 - ¥11,400
¥5,900 - ¥11,400
¥5,900 - ¥11,400
¥5,900

This conversion kit is designed to fit a standard GW Nemesis Dreadknight model kit. It is not a full model, just parts to add to your model kit to ...

View full details
¥5,900 - ¥11,400
¥5,900 - ¥11,400
¥5,900 - ¥11,400
¥5,900
10x Base - Crested G:10 Prime Helmets 3d printed
10x Base - Crested G:10 Prime Helmets 3d printed

10x Base - Crested G:11 Prime Helmets

¥3,000 - ¥3,000
¥3,000
¥3,000 - ¥3,000
¥3,000

The G:11 Prime Helmets were designed by the free-blade artist, Cornivius. It was inspired by the new Primaries models with a subtle ancient greek h...

View full details
¥3,000 - ¥3,000
¥3,000
¥3,000 - ¥3,000
¥3,000
60x Ultra Legion - Shoulder Insignia pack 3d printed
60x Ultra Legion - Shoulder Insignia pack 3d printed

60x Ultra Legion - Shoulder Insignia pack

¥3,700 - ¥4,300
¥3,700 - ¥4,300
¥3,700 - ¥4,300
¥3,700

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥3,700 - ¥4,300
¥3,700 - ¥4,300
¥3,700 - ¥4,300
¥3,700
Gen:3 Iron - Adjustable Arms 3d printed
Gen:3 Iron - Adjustable Arms 3d printed Small = 5 Sets / Medium = 10 Sets

Gen:3 Iron - Adjustable Arms

¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms) Medium sprue = 10 Sets (20 to...

View full details
¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800
10x Deathwatch - T:1a Terminator Shoulders 3d printed
10x Deathwatch - T:1a Terminator Shoulders 3d printed

10x Xenos Hunters - 5th Ed. Firstborn Terminator Pads

¥3,300 - ¥3,500
¥3,300 - ¥3,500
¥3,300 - ¥3,500
¥3,300

The 5th Edition Terminator Series of shoulder pads was designed for the classic Indomitus or Chaos (Firstborn) Terminator models. These pads can be...

View full details
¥3,300 - ¥3,500
¥3,300 - ¥3,500
¥3,300 - ¥3,500
¥3,300
View all Collection
View all Collection
Shop collection