10x Nihon Knights : Mag. Sashimono (MR)
Sashimono were banners bearing clan symbols worn by both by the common soldiers as well as the elite samurai in Japan during the Sengoku period from the middle 15th to early 17th century. The banner is roughly 37mm tall, 16 mm wide, and 3mm thick.
The Mag. Sahimono uses the Mag.Vexilla system utilizing two, 1/16" x 1/8" (2mm x 3mm) Cylinder Magnets, to affix theS ashimono (banner) to the backpack (Backpacks Sold Seporately). This allows you to remove it for safe transportation and storage, as well as allowing it to give a little instead of breaking if handled roughly.
These magnets can be found on many retailers online but, I recommend my friends over at the Magnet Barron.
Monkey Resin is a high-quality UV cured resin that will come attached to a support structure from the production process. The parts are however, pre-cleaned and ready for primer once removed. Use only super glue to adhere these parts to your models.
To remove the bits from their supports: submerge the whole assembly in water that is hot to the touch for 5 minutes. Use your fingernail to punch away several supports to create a starting point, and carefully peel your parts off of the remaining supports all together.
You can use a very fine-grit sandpaper if needed to smooth any surface or feature further. Always be sure to wear a mask when working around resin dust.
Fine Detail Plastic is an acrylic material capable of extremely high detail and is a popular choice for hobbyists creating scale models, miniature sets, and other decorative products. Although the surface can be uneven in color due to the nature of the printing process, after some light rinsing it take primer and paints up extremely well. Due to the nature of the material thin and small parts can break due to its brittleness, so handle with care. Use super glue to adhere these parts to your models.
Download STL File if you have your own 3D printer by selecting it under the Materials Options. The "Standard Triangle Language" or STL file format is native to the stereolithography/CAD software. Once you purchase this file you can print this product for yourself, and if I ever need to fix this file, and updated file will be sent to you automatically.
LEGAL DISCLAIMER: Purchasing this file does not enable you to copy and/or resell the digital file or any printed reproductions to others. The license granted to you through this purchase is for personal, non-commercial use only.
*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.