Skip to content
Insignias Full Models Conv.Kits Marines Head Swaps Weapons Shields Vehicle Parts Walkers

Monkey Resin 3

Monkey Resin 3 is a high-quality UV cured resin that will come attached to a support structure from the production process. The parts are however, pre-cleaned and ready for primer once removed. Use only super glue to adhere these parts to your models.

To remove the bits from their supports: submerge the whole assembly in water that is hot to the touch for 5 minutes. Use your fingernail to punch away several supports to create a starting point, and carefully peel your parts off of the remaining supports all together.

You can use a very fine-grit sandpaper if needed to smooth any surface or feature further. Always be sure to wear a mask when working around resin dust.

Helios Rider: Missle Tracking Sensor Array 3d printed
Helios Rider: Missle Tracking Sensor Array 3d printed

Helios Missle Tracking Array

¥1,800 - ¥9,500
¥1,800 - ¥9,500
¥1,800 - ¥9,500
¥1,800

The Helios Missle Tracking Array is designed to fit into the  front heavy bolter turret hole of a standard Land Raider kit. Quickly turn your stand...

View full details
¥1,800 - ¥9,500
¥1,800 - ¥9,500
¥1,800 - ¥9,500
¥1,800

Xenos Hunters: Top-Hatch Component

¥2,200 - ¥3,600
¥2,200 - ¥3,600
¥2,200 - ¥3,600
¥2,200

This top-hatch component is designed to fit onto a Rhino chassis (both 40k and 30k scale) or to be used with our Rhinoback crew compartment convers...

View full details
¥2,200 - ¥3,600
¥2,200 - ¥3,600
¥2,200 - ¥3,600
¥2,200

D1 : Closed Hatch Insert

¥1,700 - ¥3,800
¥1,700 - ¥3,800
¥1,700 - ¥3,800
¥1,700

The D-Series Closed Hatch Insert (and Pintle Turrets) is designed to fit into the hatches of any standard 30k tank or similarly sized vehicle acces...

View full details
¥1,700 - ¥3,800
¥1,700 - ¥3,800
¥1,700 - ¥3,800
¥1,700

D1 : Pintle Turret Starter Pack

¥3,100 - ¥7,200
¥3,100 - ¥7,200
¥3,100 - ¥7,200
¥3,100

The D-Series Pintle Turrets are designed to fit into the hatches of any standard 30k tank or similarly sized vehicle access point. (Please note: th...

View full details
¥3,100 - ¥7,200
¥3,100 - ¥7,200
¥3,100 - ¥7,200
¥3,100
Shadow Vipers : Impala Branding Kit 1 3d printed
Shadow Vipers : Impala Branding Kit 1 3d printed

Shadow Vipers : Impala Branding Kit 1

¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details
¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400

Custodian Knight - Crotch Plate

¥1,800 - ¥2,200
¥1,800 - ¥2,200
¥1,800 - ¥2,200
¥1,800

The Custodian Knight Crotch Plate replaces the stock crotch plate included with the kit. This accessory component is compatible ONLY with Questor ...

View full details
¥1,800 - ¥2,200
¥1,800 - ¥2,200
¥1,800 - ¥2,200
¥1,800

Custodian Knight - Hip Plates (L&R)

¥1,800 - ¥3,400
¥1,800 - ¥3,400
¥1,800 - ¥3,400
¥1,800

The Custodian Knight Hip Plates May be attached to the top portion of the Knight's hip area. This accessory component is compatible ONLY with Ques...

View full details
¥1,800 - ¥3,400
¥1,800 - ¥3,400
¥1,800 - ¥3,400
¥1,800
Black Dragons : Impala Branding Kit 2 3d printed

Black Dragons : Impala Branding Kit 2

¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details
¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400
Black Dragons : Impala Branding Kit 1 3d printed
Black Dragons : Impala Branding Kit 1 3d printed

Black Dragons : Impala Branding Kit 1

¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details
¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400
Shadow Vipers : Impala Branding Kit 2 3d printed
Shadow Vipers : Impala Branding Kit 2 3d printed

Shadow Vipers : Impala Branding Kit 2

¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details
¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400
Voidscale: Top-Hatch Component 3d printed
Voidscale: Top-Hatch Component 3d printed

Voidscale: Top-Hatch Component

¥2,200 - ¥3,600
¥2,200 - ¥3,600
¥2,200 - ¥3,600
¥2,200

This top-hatch component is designed to fit onto a Rhino chassis (both 40k and 30k scale) or to be used with our Rhinoback crew compartment convers...

View full details
¥2,200 - ¥3,600
¥2,200 - ¥3,600
¥2,200 - ¥3,600
¥2,200

Custodian Knight - Eagle Conversion Kit

¥13,200 - ¥13,200
¥13,200
¥13,200 - ¥13,200
¥13,200

The Iron Wolf Conversion Kit is a comprehensive bundle of components specifically for Questor Class Knights, which include:- Custodian Eagle Head-...

View full details
¥13,200 - ¥13,200
¥13,200
¥13,200 - ¥13,200
¥13,200

Custodian Knight - 2x Toe Guards

¥1,800 - ¥3,700
¥1,800 - ¥3,700
¥1,800 - ¥3,700
¥1,800

The Custodian Knight Toe Guards May be attached to the top of each toe. You may purchase multiple kits to apply Toe Guards to all of the models to...

View full details
¥1,800 - ¥3,700
¥1,800 - ¥3,700
¥1,800 - ¥3,700
¥1,800

Featured collection

60x Maltese Cross : Shoulder Insignia pack 3d printed
60x Maltese Cross : Shoulder Insignia pack 3d printed

60x Maltese Cross : Shoulder Insignia pack

¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200
4x10 Squad Making MultiPack 3d printed
4x10 Squad Making MultiPack 3d printed

4x10 Squad Making MultiPack

¥3,900 - ¥4,200
¥3,900 - ¥4,200
¥3,900 - ¥4,200
¥3,900

This pack contains 10 Tactical, 10 Assault, 10 Devestator, and 10 Comand marks, designed to fit on shoulder-like or rounded area of your favorite m...

View full details
¥3,900 - ¥4,200
¥3,900 - ¥4,200
¥3,900 - ¥4,200
¥3,900
Xenos Hunters: Redemptor Honor Kit 3d printed

Xenos Hunters: Redemptor Honor Kit

¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400

These bits are designed to fit the Primaris Redemptor dreadnought model. They're meant to give your standard kit a unique look and provide raised e...

View full details
¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400
Prime Marine - Adjustable Arms (PM) 3d printed
Prime Marine - Adjustable Arms (PM) 3d printed

Prime Marine - Adjustable Arms (PM)

¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms)Medium sprue = 10 Sets (20 tot...

View full details
¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800
Deathwatch Set 1 : Shoulder Insignia pack 3d printed

Deathwatch Set 1 : Shoulder Insignia pack

¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200
60x Kings Fist - Shoulder Insignia pack 3d printed
60x Kings Fist - Shoulder Insignia pack 3d printed

60x Kings Fist - Shoulder Insignia pack

¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200

Antonis : Arch Battleknight Conversion Kit

¥6,000 - ¥11,500
¥6,000 - ¥11,500
¥6,000 - ¥11,500
¥6,000

This conversion kit is designed to fit a standard GW Nemesis Dreadknight model kit. It is not a full model, just parts to add to your model kit to ...

View full details
¥6,000 - ¥11,500
¥6,000 - ¥11,500
¥6,000 - ¥11,500
¥6,000
10x Base - Crested G:10 Prime Helmets 3d printed
10x Base - Crested G:10 Prime Helmets 3d printed

10x Base - Crested G:11 Prime Helmets

¥3,000 - ¥3,000
¥3,000
¥3,000 - ¥3,000
¥3,000

The G:11 Prime Helmets were designed by the free-blade artist, Cornivius. It was inspired by the new Primaries models with a subtle ancient greek h...

View full details
¥3,000 - ¥3,000
¥3,000
¥3,000 - ¥3,000
¥3,000
60x Ultra Legion - Shoulder Insignia pack 3d printed
60x Ultra Legion - Shoulder Insignia pack 3d printed

60x Ultra Legion - Shoulder Insignia pack

¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200
Gen:3 Iron - Adjustable Arms 3d printed
Gen:3 Iron - Adjustable Arms 3d printed Small = 5 Sets / Medium = 10 Sets

Gen:3 Iron - Adjustable Arms

¥2,800 - ¥4,300
¥2,800 - ¥4,300
¥2,800 - ¥4,300
¥2,800

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms) Medium sprue = 10 Sets (20 to...

View full details
¥2,800 - ¥4,300
¥2,800 - ¥4,300
¥2,800 - ¥4,300
¥2,800
Deathwatch Set 2 : Shoulder Insignia pack 3d printed
Deathwatch Set 2 : Shoulder Insignia pack 3d printed

Deathwatch Set 2 : Shoulder Insignia pack

¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200

This insignia pack is designed to fit on any shoulder or rounded area of your favorite models. (YES, they fit the new marines) They are meant to pe...

View full details
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200
View all Collection
View all Collection
Shop collection