Monkey Resin 3

Monkey Resin 3 is a high-quality UV cured resin that will come attached to a support structure from the production process. The parts are however, pre-cleaned and ready for primer once removed. Use only super glue to adhere these parts to your models.

To remove the bits from their supports: submerge the whole assembly in water that is hot to the touch for 5 minutes. Use your fingernail to punch away several supports to create a starting point, and carefully peel your parts off of the remaining supports all together.

You can use a very fine-grit sandpaper if needed to smooth any surface or feature further. Always be sure to wear a mask when working around resin dust.

Sort by

View as

Twin Rapfire - R1 Hatch Turrets 3d printed

Twin Rapfire - R1 Hatch Turrets 3d printed Small = 1 Hatch Turret

R1 : Twin Rapfire Hatch Turret

¥1,600 - ¥6,300

¥1,600

The R-Series Hatch Turrets are designed to fit into the hatches of any standard 40k tank or similarly sized vehicle access point. However, they are...

View full details

¥1,600 - ¥6,300

¥1,600

Maltese Cross : Full Rhinoback Impulsor Kit

¥4,900 - ¥4,900

¥4,900

¥4,900 - ¥4,900

¥4,900

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details

¥4,900 - ¥4,900

¥4,900

¥4,900 - ¥4,900

¥4,900

Shaggy Wolf : Full Rhinoback Impulsor Kit

¥4,900 - ¥4,900

¥4,900

¥4,900 - ¥4,900

¥4,900

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details

¥4,900 - ¥4,900

¥4,900

¥4,900 - ¥4,900

¥4,900

Angel Tears : Full Rhinoback Impulsor Kit

¥4,900 - ¥4,900

¥4,900

¥4,900 - ¥4,900

¥4,900

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details

¥4,900 - ¥4,900

¥4,900

¥4,900 - ¥4,900

¥4,900

Winged Sword : Full Rhinoback Impulsor Kit

¥4,900 - ¥4,900

¥4,900

¥4,900 - ¥4,900

¥4,900

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details

¥4,900 - ¥4,900

¥4,900

¥4,900 - ¥4,900

¥4,900

Impala Defensive System Mounting Kit (Magnet-Ready)

¥3,900 - ¥3,900

¥3,900

¥3,900 - ¥3,900

¥3,900

The Impala Defensive System Mounting Kit is designed to integrate seamlessly with our Rhinoback crew compartment conversion kit. However, the magne...

View full details

¥3,900 - ¥3,900

¥3,900

¥3,900 - ¥3,900

¥3,900

Kings Fist : Full Rhinoback Impulsor Kit

¥4,900 - ¥4,900

¥4,900

¥4,900 - ¥4,900

¥4,900

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details

¥4,900 - ¥4,900

¥4,900

¥4,900 - ¥4,900

¥4,900

Maltese Cross : Impulsor Branding Kit 1 3d printed

Maltese Cross : Impala Branding Kit 1

¥3,300 - ¥6,500

¥3,300

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details

¥3,300 - ¥6,500

¥3,300

Ultra Legion : Full Rhinoback Impulsor Kit

¥4,900 - ¥4,900

¥4,900

¥4,900 - ¥4,900

¥4,900

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details

¥4,900 - ¥4,900

¥4,900

¥4,900 - ¥4,900

¥4,900

Shaggy Wolf : Impulsor Front Plate 1 3d printed

Shaggy Wolf : Impala Front Plate 1

¥2,800 - ¥5,000

¥2,800

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details

¥2,800 - ¥5,000

¥2,800

Shaggy Wolf: Impulsor Branding Kit 1 3d printed

Shaggy Wolf: Impala Branding Kit 1

¥3,300 - ¥6,300

¥3,300

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details

¥3,300 - ¥6,300

¥3,300

Neptune Spears : Full Rhinoback Impulsor Kit

¥4,900 - ¥4,900

¥4,900

¥4,900 - ¥4,900

¥4,900

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details

¥4,900 - ¥4,900

¥4,900

¥4,900 - ¥4,900

¥4,900

Base : Phobos Battle Tank Turret Set

¥4,600 - ¥4,600

¥4,600

¥4,600 - ¥4,600

¥4,600

The Phobos Battle Tank set includes a Twin Laser and Autcannon main weapon option. It's designed to represent a Deimos Pattern Predator with some n...

View full details

¥4,600 - ¥4,600

¥4,600

¥4,600 - ¥4,600

¥4,600

Kings Fist: Impulsor Branding Kit 1 3d printed

Kings Fist: Impulsor Branding Kit 1 3d printed These components are designed to be able to fit the Primaris Impulsor kit.

Kings Fist: Impala Branding Kit 1

¥3,300 - ¥6,500

¥3,300

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details

¥3,300 - ¥6,500

¥3,300

Angel Tears : Impulsor Front Plate 1 3d printed

Angel Tears : Impala Front Plate 1

¥2,800 - ¥5,000

¥2,800

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details

¥2,800 - ¥5,000

¥2,800

Maltese Cross : Impulsor Front Plate 1 3d printed

Maltese Cross : Impala Front Plate 1

¥2,800 - ¥5,000

¥2,800

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details

¥2,800 - ¥5,000

¥2,800

Xenos Hunters : Impala Front Plate 1

¥2,800 - ¥5,000

¥2,800

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details

¥2,800 - ¥5,000

¥2,800

Neptune Spears : Impulsor Branding Kit 3d printed

Neptune Spears : Impala Branding Kit

¥3,300 - ¥6,500

¥3,300

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details

¥3,300 - ¥6,500

¥3,300

Shaggy Wolf : Phobos Battle Tank Turret Set

¥3,300 - ¥4,600

¥3,300

The Phobos Battle Tank set includes a Twin Laser and Autcannon main weapon option. It's designed to represent a Deimos Pattern Predator with some n...

View full details

¥3,300 - ¥4,600

¥3,300

Maltese Cross : Phobos Battle Tank Turret Set

¥3,300 - ¥4,600

¥3,300

The Phobos Battle Tank set includes a Twin Laser and Autcannon main weapon option. It's designed to represent a Deimos Pattern Predator with some n...

View full details

¥3,300 - ¥4,600

¥3,300

Angel Tears : Impulsor Branding Kit 1 3d printed

Angel Tears : Impulsor Branding Kit 1 3d printed These components are designed to be able to fit the Primaris Impulsor kit

Angel Tears : Impala Branding Kit 1

¥3,300 - ¥6,500

¥3,300

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details

¥3,300 - ¥6,500

¥3,300

Ultra Legion: Impulsor Branding Kit 1 3d printed

Ultra Legion: Impala Branding Kit 1

¥3,300 - ¥6,500

¥3,300

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details

¥3,300 - ¥6,500

¥3,300

Winged Sword : Impulsor Front Plate 1 3d printed

Winged Sword : Impala Front Plate 1

¥1,700 - ¥5,000

¥1,700

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details

¥1,700 - ¥5,000

¥1,700

Skulls & Crosses : Impulsor Front Plate 3d printed

Skulls & Crosses : Impala Front Plate

¥2,800 - ¥5,000

¥2,800

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details

¥2,800 - ¥5,000

¥2,800

Hydra Legion : Rhayus Tank Turret

¥4,400 - ¥4,400

¥4,400

¥4,400 - ¥4,400

¥4,400

The Rhayus-Pattern Battle Tank Turret is designed to be a sleek, low-profile option for your Predator or Gladiator models. This turret fits the sta...

View full details

¥4,400 - ¥4,400

¥4,400

¥4,400 - ¥4,400

¥4,400

Sun Scarabs : Phobos Battle Tank Turret Set

¥3,300 - ¥4,600

¥3,300

The Phobos Battle Tank set includes a Twin Laser and Autcannon main weapon option. It's designed to represent a Deimos Pattern Predator with some n...

View full details

¥3,300 - ¥4,600

¥3,300

Chaos : Rhayus Tank Turret

¥4,400 - ¥4,400

¥4,400

¥4,400 - ¥4,400

¥4,400

The Rhayus-Pattern Battle Tank Turret is designed to be a sleek, low-profile option for your Predator or Gladiator models. This turret fits the sta...

View full details

¥4,400 - ¥4,400

¥4,400

¥4,400 - ¥4,400

¥4,400

Blood Wraiths : Impulsor Front Plate 3d printed

Blood Wraiths : Impala Front Plate

¥2,900 - ¥5,000

¥2,900

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details

¥2,900 - ¥5,000

¥2,900

the Kracken : Impulsor Branding Kit 2 3d printed

the Kracken : Impala Branding Kit 2

¥3,300 - ¥6,500

¥3,300

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details

¥3,300 - ¥6,500

¥3,300

Spikes & Chain : Impulsor Front Plate 3d printed

Spikes & Chain : Impala Front Plate

¥2,800 - ¥5,000

¥2,800

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details

¥2,800 - ¥5,000

¥2,800

Kings Fist : Impulsor Front Plate 1 3d printed

Kings Fist : Impulsor Front Plate 1 3d printed It replaces the associated part of the Impulsor kit.

Kings Fist : Impala Front Plate 1

¥2,800 - ¥5,000

¥2,800

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details

¥2,800 - ¥5,000

¥2,800

Ultra Legion : Impulsor Front Plate 1 3d printed

Ultra Legion : Impala Front Plate 1

¥2,800 - ¥5,000

¥2,800

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details

¥2,800 - ¥5,000

¥2,800

Dragon Head : Phobos Battle Tank Turret Set

¥3,300 - ¥4,600

¥3,300

The Phobos Battle Tank set includes a Twin Laser and Autcannon main weapon option. It's designed to represent a Deimos Pattern Predator with some n...

View full details

¥3,300 - ¥4,600

¥3,300

Ultra Legion : Phobos Battle Tank Turret Set

¥3,300 - ¥4,600

¥3,300

The Phobos Battle Tank set includes a Twin Laser and Autcannon main weapon option. It's designed to represent a Deimos Pattern Predator with some n...

View full details

¥3,300 - ¥4,600

¥3,300

Blood Wing : Phobos Battle Tank Turret Set

¥3,300 - ¥4,600

¥3,300

The Phobos Battle Tank set includes a Twin Laser and Autcannon main weapon option. It's designed to represent a Deimos Pattern Predator with some n...

View full details

¥3,300 - ¥4,600

¥3,300

Maltese Cross : Full Rhinoback Impulsor Kit 2

¥4,900 - ¥4,900

¥4,900

¥4,900 - ¥4,900

¥4,900

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details

¥4,900 - ¥4,900

¥4,900

¥4,900 - ¥4,900

¥4,900

Winged Sword : Phobos Battle Tank Turret Set

¥3,300 - ¥4,600

¥3,300

The Phobos Battle Tank set includes a Twin Laser and Autcannon main weapon option. It's designed to represent a Deimos Pattern Predator with some n...

View full details

¥3,300 - ¥4,600

¥3,300

D1 : Boltfire Pintle Turret

¥1,600 - ¥3,900

¥1,600

Special Note: The 2 Turret Set includes weapons with shell ejections on opposite sides. The single turret option (Just 1), has its shell ejection o...

View full details

¥1,600 - ¥3,900

¥1,600

D1 : Twin Rapfire Pintle Turret

¥1,600 - ¥3,900

¥1,600

The D-Series Pintle Turrets are designed to fit into the hatches of any standard 30k tank or similarly sized vehicle access point. (Please note: th...

View full details

¥1,600 - ¥3,900

¥1,600

Skull Wall : Impulsor Front Plate 3d printed

Skull Wall : Impala Front Plate

¥2,800 - ¥5,000

¥2,800

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details

¥2,800 - ¥5,000

¥2,800

Neptune Spears : Impulsor Front Plate 3d printed

Neptune Spears : Impala Front Plate

¥2,800 - ¥5,000

¥2,800

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details

¥2,800 - ¥5,000

¥2,800

Winged Claw : Rhayus Tank Turret

¥4,500 - ¥4,600

¥4,500

The Rhayus-Pattern Battle Tank Turret is designed to be a sleek, low-profile option for your Predator or Gladiator models. This turret fits the sta...

View full details

¥4,500 - ¥4,600

¥4,500

Storm Scars : Phobos Battle Tank Turret Set

¥3,300 - ¥4,600

¥3,300

The Phobos Battle Tank set includes a Twin Laser and Autcannon main weapon option. It's designed to represent a Deimos Pattern Predator with some n...

View full details

¥3,300 - ¥4,600

¥3,300

Plague Sun : Phobos Battle Tank Turret Set

¥3,300 - ¥4,600

¥3,300

The Phobos Battle Tank set includes a Twin Laser and Autcannon main weapon option. It's designed to represent a Deimos Pattern Predator with some n...

View full details

¥3,300 - ¥4,600

¥3,300

Nightmare Legion : Phobos Battle Tank Turret Set

¥3,300 - ¥4,600

¥3,300

The Phobos Battle Tank set includes a Twin Laser and Autcannon main weapon option. It's designed to represent a Deimos Pattern Predator with some n...

View full details

¥3,300 - ¥4,600

¥3,300

Nightmare Legion : Spiked Phobos Battle Tank Turret Set

¥3,300 - ¥4,600

¥3,300

The Phobos Battle Tank set includes a Twin Laser and Autcannon main weapon option. It's designed to represent a Deimos Pattern Predator with some n...

View full details

¥3,300 - ¥4,600

¥3,300

Emperor's Third : Phobos Battle Tank Turret Set

¥3,300 - ¥4,600

¥3,300

The Phobos Battle Tank set includes a Twin Laser and Autcannon main weapon option. It's designed to represent a Deimos Pattern Predator with some n...

View full details

¥3,300 - ¥4,600

¥3,300

Dark Legion : Phobos Battle Tank Turret Set

¥3,300 - ¥4,600

¥3,300

The Phobos Battle Tank set includes a Twin Laser and Autcannon main weapon option. It's designed to represent a Deimos Pattern Predator with some n...

View full details

¥3,300 - ¥4,600

¥3,300

Featured collection

60x Maltese Cross : Shoulder Insignia pack

¥2,800 - ¥3,100

¥2,800

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details

¥2,800 - ¥3,100

¥2,800

4x10 Squad Making MultiPack

¥3,800 - ¥4,100

¥3,800

This pack contains 10 Tactical, 10 Assault, 10 Devestator, and 10 Comand marks, designed to fit on shoulder-like or rounded area of your favorite m...

View full details

¥3,800 - ¥4,100

¥3,800

Xenos Hunters: Redemptor Honor Kit

¥2,300 - ¥3,300

¥2,300

These bits are designed to fit the Primaris Redemptor dreadnought model. They're meant to give your standard kit a unique look and provide raised e...

View full details

¥2,300 - ¥3,300

¥2,300

Prime Marine - Adjustable Arms (PM)

¥2,700 - ¥4,100

¥2,700

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue = 5 Sets (10 total arms)Medium sprue = 10 Sets (20 tot...

View full details

¥2,700 - ¥4,100

¥2,700

Deathwatch Set 1 : Shoulder Insignia pack

¥3,100 - ¥3,500

¥3,100

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details

¥3,100 - ¥3,500

¥3,100

60x Kings Fist - Shoulder Insignia pack

¥3,600 - ¥4,200

¥3,600

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details

¥3,600 - ¥4,200

¥3,600

Antonis : Arch Battleknight Conversion Kit

¥5,800 - ¥11,200

¥5,800

This conversion kit is designed to fit a standard GW Nemesis Dreadknight model kit. It is not a full model, just parts to add to your model kit to ...

View full details

¥5,800 - ¥11,200

¥5,800

10x Base - Crested G:10 Prime Helmets 3d printed

10x Base - Crested G:11 Prime Helmets

¥2,900 - ¥2,900

¥2,900

¥2,900 - ¥2,900

¥2,900

The G:11 Prime Helmets were designed by the free-blade artist, Cornivius. It was inspired by the new Primaries models with a subtle ancient greek h...

View full details

¥2,900 - ¥2,900

¥2,900

¥2,900 - ¥2,900

¥2,900

60x Ultra Legion - Shoulder Insignia pack

¥3,600 - ¥4,200

¥3,600

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details

¥3,600 - ¥4,200

¥3,600

Gen:3 Iron - Adjustable Arms

¥2,700 - ¥4,200

¥2,700

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue = 5 Sets (10 total arms) Medium sprue = 10 Sets (20 to...

View full details

¥2,700 - ¥4,200

¥2,700

10x Deathwatch - T:1a Terminator Shoulders 3d printed

10x Xenos Hunters - 5th Ed. Firstborn Terminator Pads

¥3,300 - ¥3,400

¥3,300

The 5th Edition Terminator Series of shoulder pads was designed for the classic Indomitus or Chaos (Firstborn) Terminator models. These pads can be...

View full details

¥3,300 - ¥3,400

¥3,300

View all Collection

Shop collection

Country

Country

Monkey Resin 3

Featured collection

Country

Country