Skip to content
Insignias Full Models Conv.Kits Marines Head Swaps Weapons Shields Vehicle Parts Walkers Apparel

Monkey Resin 3

Monkey Resin 3 is a high-quality UV cured resin that will come attached to a support structure from the production process. The parts are however, pre-cleaned and ready for primer once removed. Use only super glue to adhere these parts to your models.

To remove the bits from their supports: submerge the whole assembly in water that is hot to the touch for 5 minutes. Use your fingernail to punch away several supports to create a starting point, and carefully peel your parts off of the remaining supports all together.

You can use a very fine-grit sandpaper if needed to smooth any surface or feature further. Always be sure to wear a mask when working around resin dust.

Helios Rider: Missle Tracking Sensor Array 3d printed
Helios Rider: Missle Tracking Sensor Array 3d printed

Helios Missle Tracking Array

¥1,700 - ¥9,300
¥1,700 - ¥9,300
¥1,700 - ¥9,300
¥1,700

The Helios Missle Tracking Array is designed to fit into the  front heavy bolter turret hole of a standard Land Raider kit. Quickly turn your stand...

View full details
¥1,700 - ¥9,300
¥1,700 - ¥9,300
¥1,700 - ¥9,300
¥1,700
Hav-Launcher - R2 Hatch Turrets 3d printed
Hav-Launcher - R2 Hatch Turrets 3d printed

Hav-Launcher - R2 Hatch Turrets

¥2,600 - ¥11,800
¥2,600 - ¥11,800
¥2,600 - ¥11,800
¥2,600

These Hatch Turrets are designed to fit into the hatches of a standard troop tank, or similar size personal access point. Our customers have found ...

View full details
¥2,600 - ¥11,800
¥2,600 - ¥11,800
¥2,600 - ¥11,800
¥2,600

Proto Raider : Magnetized Haul Turret kit

¥2,200 - ¥4,700
¥2,200 - ¥4,700
¥2,200 - ¥4,700
¥2,200

This Magnetized Haul Turret kit makes it easy to change your weapon options on your some of the vehicle models from the early days of the legions. ...

View full details
¥2,200 - ¥4,700
¥2,200 - ¥4,700
¥2,200 - ¥4,700
¥2,200
Hav-Launcher - R1 Hatch Turrets 3d printed
Hav-Launcher - R1 Hatch Turrets 3d printed

Hav-Launcher - R1 Hatch Turrets

¥2,000 - ¥8,900
¥2,000 - ¥8,900
¥2,000 - ¥8,900
¥2,000

These Hatch Turrets are designed to fit into the hatches of a standard troop tank, or similar size personal access point. Our customers have found ...

View full details
¥2,000 - ¥8,900
¥2,000 - ¥8,900
¥2,000 - ¥8,900
¥2,000

Hydra Legion : Spari Raider Front Gate

¥2,100 - ¥2,700
¥2,100 - ¥2,700
¥2,100 - ¥2,700
¥2,100

Spari Raider Front Gates are compatible with the larger Land Raider* models from the early days of the legions. This custom-designed gate arrives u...

View full details
¥2,100 - ¥2,700
¥2,100 - ¥2,700
¥2,100 - ¥2,700
¥2,100

Hydra Legion : Proto Raider Front Gate

¥2,000 - ¥2,600
¥2,000 - ¥2,600
¥2,000 - ¥2,600
¥2,000

Proto Raider Front Gates are compatible with the smaller Land Raider* models from the early days of the legions. This custom-designed gate arrives ...

View full details
¥2,000 - ¥2,600
¥2,000 - ¥2,600
¥2,000 - ¥2,600
¥2,000

Alpha Hydra : Universal Raider Doors

¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400

Universal Raider Side Doors are compatible with different Land Raider* models and some of the larger flying vehicles used by the legions. This cust...

View full details
¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400

Iron Heads Hazard : Universal Raider Doors

¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400

Universal Raider Side Doors are compatible with different Land Raider* models and some of the larger flying vehicles used by the legions. This cust...

View full details
¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400

Iron Heads : Proto Raider Front Gate

¥2,000 - ¥2,600
¥2,000 - ¥2,600
¥2,000 - ¥2,600
¥2,000

Proto Raider Front Gates are compatible with the smaller Land Raider* models from the early days of the legions. This custom-designed gate arrives ...

View full details
¥2,000 - ¥2,600
¥2,000 - ¥2,600
¥2,000 - ¥2,600
¥2,000

Hydra Legion : Phoba Raider Front Gate

¥2,200 - ¥2,900
¥2,200 - ¥2,900
¥2,200 - ¥2,900
¥2,200

Phoba Raider Front Gates are compatible with the standard Land Raider* models for both the Empire and Chaos marines. This custom-designed gate arri...

View full details
¥2,200 - ¥2,900
¥2,200 - ¥2,900
¥2,200 - ¥2,900
¥2,200

Alpha Omega : Universal Raider Doors

¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400

Universal Raider Side Doors are compatible with different Land Raider* models and some of the larger flying vehicles used by the legions. This cust...

View full details
¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400

Iron Legion : Universal Raider Doors

¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400

Universal Raider Side Doors are compatible with different Land Raider* models and some of the larger flying vehicles used by the legions. This cust...

View full details
¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400

Iron Heads : Spari Raider Front Gate

¥2,100 - ¥2,700
¥2,100 - ¥2,700
¥2,100 - ¥2,700
¥2,100

Spari Raider Front Gates are compatible with the larger Land Raider* models from the early days of the legions. This custom-designed gate arrives u...

View full details
¥2,100 - ¥2,700
¥2,100 - ¥2,700
¥2,100 - ¥2,700
¥2,100

Hydra Legion : Universal Raider Doors

¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400

Universal Raider Side Doors are compatible with different Land Raider* models and some of the larger flying vehicles used by the legions. This cust...

View full details
¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400

Featured collection

60x Maltese Cross : Shoulder Insignia pack 3d printed
60x Maltese Cross : Shoulder Insignia pack 3d printed

60x Maltese Cross : Shoulder Insignia pack

¥2,800 - ¥3,100
¥2,800 - ¥3,100
¥2,800 - ¥3,100
¥2,800

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥2,800 - ¥3,100
¥2,800 - ¥3,100
¥2,800 - ¥3,100
¥2,800
4x10 Squad Making MultiPack 3d printed
4x10 Squad Making MultiPack 3d printed

4x10 Squad Making MultiPack

¥3,800 - ¥4,100
¥3,800 - ¥4,100
¥3,800 - ¥4,100
¥3,800

This pack contains 10 Tactical, 10 Assault, 10 Devestator, and 10 Comand marks, designed to fit on shoulder-like or rounded area of your favorite m...

View full details
¥3,800 - ¥4,100
¥3,800 - ¥4,100
¥3,800 - ¥4,100
¥3,800
Xenos Hunters: Redemptor Honor Kit 3d printed

Xenos Hunters: Redemptor Honor Kit

¥2,400 - ¥3,300
¥2,400 - ¥3,300
¥2,400 - ¥3,300
¥2,400

These bits are designed to fit the Primaris Redemptor dreadnought model. They're meant to give your standard kit a unique look and provide raised e...

View full details
¥2,400 - ¥3,300
¥2,400 - ¥3,300
¥2,400 - ¥3,300
¥2,400
Prime Marine - Adjustable Arms (PM) 3d printed
Prime Marine - Adjustable Arms (PM) 3d printed

Prime Marine - Adjustable Arms (PM)

¥2,700 - ¥4,100
¥2,700 - ¥4,100
¥2,700 - ¥4,100
¥2,700

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms)Medium sprue = 10 Sets (20 tot...

View full details
¥2,700 - ¥4,100
¥2,700 - ¥4,100
¥2,700 - ¥4,100
¥2,700
Deathwatch Set 1 : Shoulder Insignia pack 3d printed

Deathwatch Set 1 : Shoulder Insignia pack

¥3,100 - ¥3,500
¥3,100 - ¥3,500
¥3,100 - ¥3,500
¥3,100

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥3,100 - ¥3,500
¥3,100 - ¥3,500
¥3,100 - ¥3,500
¥3,100
60x Kings Fist - Shoulder Insignia pack 3d printed
60x Kings Fist - Shoulder Insignia pack 3d printed

60x Kings Fist - Shoulder Insignia pack

¥3,600 - ¥4,300
¥3,600 - ¥4,300
¥3,600 - ¥4,300
¥3,600

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥3,600 - ¥4,300
¥3,600 - ¥4,300
¥3,600 - ¥4,300
¥3,600

Antonis : Arch Battleknight Conversion Kit

¥5,800 - ¥11,200
¥5,800 - ¥11,200
¥5,800 - ¥11,200
¥5,800

This conversion kit is designed to fit a standard GW Nemesis Dreadknight model kit. It is not a full model, just parts to add to your model kit to ...

View full details
¥5,800 - ¥11,200
¥5,800 - ¥11,200
¥5,800 - ¥11,200
¥5,800
10x Base - Crested G:10 Prime Helmets 3d printed
10x Base - Crested G:10 Prime Helmets 3d printed

10x Base - Crested G:11 Prime Helmets

¥2,900 - ¥2,900
¥2,900
¥2,900 - ¥2,900
¥2,900

The G:11 Prime Helmets were designed by the free-blade artist, Cornivius. It was inspired by the new Primaries models with a subtle ancient greek h...

View full details
¥2,900 - ¥2,900
¥2,900
¥2,900 - ¥2,900
¥2,900
60x Ultra Legion - Shoulder Insignia pack 3d printed
60x Ultra Legion - Shoulder Insignia pack 3d printed

60x Ultra Legion - Shoulder Insignia pack

¥3,600 - ¥4,300
¥3,600 - ¥4,300
¥3,600 - ¥4,300
¥3,600

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥3,600 - ¥4,300
¥3,600 - ¥4,300
¥3,600 - ¥4,300
¥3,600
Gen:3 Iron - Adjustable Arms 3d printed
Gen:3 Iron - Adjustable Arms 3d printed Small = 5 Sets / Medium = 10 Sets

Gen:3 Iron - Adjustable Arms

¥2,700 - ¥4,200
¥2,700 - ¥4,200
¥2,700 - ¥4,200
¥2,700

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms) Medium sprue = 10 Sets (20 to...

View full details
¥2,700 - ¥4,200
¥2,700 - ¥4,200
¥2,700 - ¥4,200
¥2,700
10x Deathwatch - T:1a Terminator Shoulders 3d printed
10x Deathwatch - T:1a Terminator Shoulders 3d printed

10x Xenos Hunters - 5th Ed. Firstborn Terminator Pads

¥3,300 - ¥3,400
¥3,300 - ¥3,400
¥3,300 - ¥3,400
¥3,300

The 5th Edition Terminator Series of shoulder pads was designed for the classic Indomitus or Chaos (Firstborn) Terminator models. These pads can be...

View full details
¥3,300 - ¥3,400
¥3,300 - ¥3,400
¥3,300 - ¥3,400
¥3,300
View all Collection
View all Collection
Shop collection