Skip to content
Insignias Full Models Conv.Kits Marines Head Swaps Weapons Shields Vehicle Parts Walkers Apparel

Monkey Resin 3

Monkey Resin 3 is a high-quality UV cured resin that will come attached to a support structure from the production process. The parts are however, pre-cleaned and ready for primer once removed. Use only super glue to adhere these parts to your models.

To remove the bits from their supports: submerge the whole assembly in water that is hot to the touch for 5 minutes. Use your fingernail to punch away several supports to create a starting point, and carefully peel your parts off of the remaining supports all together.

You can use a very fine-grit sandpaper if needed to smooth any surface or feature further. Always be sure to wear a mask when working around resin dust.

Helios Rider: Missle Tracking Sensor Array 3d printed
Helios Rider: Missle Tracking Sensor Array 3d printed

Helios Missle Tracking Array

¥1,600 - ¥8,800
¥1,600 - ¥8,800
¥1,600 - ¥8,800
¥1,600

The Helios Missle Tracking Array is designed to fit into the  front heavy bolter turret hole of a standard Land Raider kit. Quickly turn your stand...

View full details
¥1,600 - ¥8,800
¥1,600 - ¥8,800
¥1,600 - ¥8,800
¥1,600

Xenos Hunters: Top-Hatch Component

¥2,000 - ¥3,300
¥2,000 - ¥3,300
¥2,000 - ¥3,300
¥2,000

These Top-hatch Components are meant to fit onto the Rhino Chassis or Rhinoback crew compartment conversion kit. They have 2 different sides and fi...

View full details
¥2,000 - ¥3,300
¥2,000 - ¥3,300
¥2,000 - ¥3,300
¥2,000
Voidscale: Top-Hatch Component 3d printed
Voidscale: Top-Hatch Component 3d printed

Voidscale: Top-Hatch Component

¥2,000 - ¥3,300
¥2,000 - ¥3,300
¥2,000 - ¥3,300
¥2,000

These Top-hatch Components are meant to fit onto the Rhino Chassis or Rhinoback crew compartment conversion kit. They have 2 different sides and fi...

View full details
¥2,000 - ¥3,300
¥2,000 - ¥3,300
¥2,000 - ¥3,300
¥2,000

Custodian Knight - Eagle Conversion Kit

¥12,300 - ¥12,300
¥12,300
¥12,300 - ¥12,300
¥12,300

The Iron Wolf Conversion Kit is a comprehensive bundle of components specifically for Questor Class Knights, which include:- Custodian Eagle Head-...

View full details
¥12,300 - ¥12,300
¥12,300
¥12,300 - ¥12,300
¥12,300

Custodian Knight - Crotch Plate

¥1,600 - ¥2,000
¥1,600 - ¥2,000
¥1,600 - ¥2,000
¥1,600

The Custodian Knight Crotch Plate replaces the stock crotch plate included with the kit. This accessory component is compatible ONLY with Questor ...

View full details
¥1,600 - ¥2,000
¥1,600 - ¥2,000
¥1,600 - ¥2,000
¥1,600

Custodian Knight - 2x Toe Guards

¥1,700 - ¥3,400
¥1,700 - ¥3,400
¥1,700 - ¥3,400
¥1,700

The Custodian Knight Toe Guards May be attached to the top of each toe. You may purchase multiple kits to apply Toe Guards to all of the models to...

View full details
¥1,700 - ¥3,400
¥1,700 - ¥3,400
¥1,700 - ¥3,400
¥1,700

Custodian Knight - Hip Plates (L&R)

¥1,600 - ¥3,100
¥1,600 - ¥3,100
¥1,600 - ¥3,100
¥1,600

The Custodian Knight Hip Plates May be attached to the top portion of the Knight's hip area. This accessory component is compatible ONLY with Ques...

View full details
¥1,600 - ¥3,100
¥1,600 - ¥3,100
¥1,600 - ¥3,100
¥1,600

Featured collection

60x Maltese Cross : Shoulder Insignia pack 3d printed
60x Maltese Cross : Shoulder Insignia pack 3d printed

60x Maltese Cross : Shoulder Insignia pack

¥2,600 - ¥2,600
¥2,600
¥2,600 - ¥2,600
¥2,600

This insignia pack is designed to fit on any shoulder or rounded area of your favorite models. (YES, they fit the new marines) They are meant to pe...

View full details
¥2,600 - ¥2,600
¥2,600
¥2,600 - ¥2,600
¥2,600
4x10 Squad Making MultiPack 3d printed
4x10 Squad Making MultiPack 3d printed

4x10 Squad Making MultiPack

¥3,300 - ¥3,700
¥3,300 - ¥3,700
¥3,300 - ¥3,700
¥3,300

This pack contains 10 Tactical, 10 Assault, 10 Devestator, and 10 Comand marks, designed to fit on shoulder-like or rounded area of your favorite m...

View full details
¥3,300 - ¥3,700
¥3,300 - ¥3,700
¥3,300 - ¥3,700
¥3,300
Prime Marine - Adjustable Arms (PM) 3d printed
Prime Marine - Adjustable Arms (PM) 3d printed

Prime Marine - Adjustable Arms (PM)

¥2,600 - ¥3,900
¥2,600 - ¥3,900
¥2,600 - ¥3,900
¥2,600

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms)Medium sprue = 10 Sets (20 tot...

View full details
¥2,600 - ¥3,900
¥2,600 - ¥3,900
¥2,600 - ¥3,900
¥2,600
60x Kings Fist - Shoulder Insignia pack 3d printed
60x Kings Fist - Shoulder Insignia pack 3d printed

60x Kings Fist - Shoulder Insignia pack

¥2,800 - ¥3,000
¥2,800 - ¥3,000
¥2,800 - ¥3,000
¥2,800

This insignia pack is designed to fit on any shoulder or rounded area of your favorite models. (YES, they fit the new marines) They are meant to pe...

View full details
¥2,800 - ¥3,000
¥2,800 - ¥3,000
¥2,800 - ¥3,000
¥2,800

Antonis : Arch Battleknight Conversion Kit

¥5,500 - ¥10,700
¥5,500 - ¥10,700
¥5,500 - ¥10,700
¥5,500

This conversion kit is designed to fit a standard GW Nemesis Dreadknight model kit. It is not a full model, just parts to add to your model kit to ...

View full details
¥5,500 - ¥10,700
¥5,500 - ¥10,700
¥5,500 - ¥10,700
¥5,500
Xenos Hunters: Redemptor Honor Kit 3d printed
Xenos Hunters: Redemptor Honor Kit 3d printed

Xenos Hunters: Redemptor Honor Kit

¥2,200 - ¥3,100
¥2,200 - ¥3,100
¥2,200 - ¥3,100
¥2,200

These bits are designed to fit the Primaris Redemptor dreadnought model. They're meant to give your standard kit a unique look and provide raised e...

View full details
¥2,200 - ¥3,100
¥2,200 - ¥3,100
¥2,200 - ¥3,100
¥2,200
Deathwatch Set 1 : Shoulder Insignia pack 3d printed

Deathwatch Set 1 : Shoulder Insignia pack

¥3,100 - ¥3,200
¥3,100 - ¥3,200
¥3,100 - ¥3,200
¥3,100

This insignia pack is designed to fit on any shoulder or rounded area of your favorite models. (YES, they fit the new marines) They are meant to pe...

View full details
¥3,100 - ¥3,200
¥3,100 - ¥3,200
¥3,100 - ¥3,200
¥3,100
Gen:3 Iron - Adjustable Arms 3d printed
Gen:3 Iron - Adjustable Arms 3d printed Small = 5 Sets / Medium = 10 Sets

Gen:3 Iron - Adjustable Arms

¥2,600 - ¥3,900
¥2,600 - ¥3,900
¥2,600 - ¥3,900
¥2,600

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms) Medium sprue = 10 Sets (20 to...

View full details
¥2,600 - ¥3,900
¥2,600 - ¥3,900
¥2,600 - ¥3,900
¥2,600
60x Ultra Legion - Shoulder Insignia pack 3d printed
60x Ultra Legion - Shoulder Insignia pack 3d printed

60x Ultra Legion - Shoulder Insignia pack

¥2,600 - ¥2,800
¥2,600 - ¥2,800
¥2,600 - ¥2,800
¥2,600

This insignia pack is designed to fit on any shoulder or rounded area of your favorite models. (YES, they fit the new marines) They are meant to pe...

View full details
¥2,600 - ¥2,800
¥2,600 - ¥2,800
¥2,600 - ¥2,800
¥2,600
Gen:4 Maximus - Adjustable Arms 3d printed
Gen:4 Maximus - Adjustable Arms 3d printed

Gen:4 Maximus - Adjustable Arms

¥2,500 - ¥3,800
¥2,500 - ¥3,800
¥2,500 - ¥3,800
¥2,500

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms)Medium sprue = 10 Sets (20 tot...

View full details
¥2,500 - ¥3,800
¥2,500 - ¥3,800
¥2,500 - ¥3,800
¥2,500
10x Base - Crested G:10 Prime Helmets 3d printed
10x Base - Crested G:10 Prime Helmets 3d printed

10x Base - Crested G:11 Prime Helmets

¥2,800 - ¥2,800
¥2,800
¥2,800 - ¥2,800
¥2,800

The G:11 Prime Helmets were designed by the free-blade artist, Cornivius. It was inspired by the new Primaries models with a subtle ancient greek h...

View full details
¥2,800 - ¥2,800
¥2,800
¥2,800 - ¥2,800
¥2,800
View all Collection
View all Collection
Shop collection