Skip to content
Insignias Full Models Conv.Kits Marines Head Swaps Weapons Shields Vehicle Parts Walkers

Monkey Resin 3

Monkey Resin 3 is a high-quality UV cured resin that will come attached to a support structure from the production process. The parts are however, pre-cleaned and ready for primer once removed. Use only super glue to adhere these parts to your models.

To remove the bits from their supports: submerge the whole assembly in water that is hot to the touch for 5 minutes. Use your fingernail to punch away several supports to create a starting point, and carefully peel your parts off of the remaining supports all together.

You can use a very fine-grit sandpaper if needed to smooth any surface or feature further. Always be sure to wear a mask when working around resin dust.

D2 : Pintle Mount Hav-Launcher

¥1,800 - ¥4,100
¥1,800 - ¥4,100
¥1,800 - ¥4,100
¥1,800

The D-Series Pintle Turrets are designed to fit into the hatches of any standard 30k tank or similarly sized vehicle access point. (Please note: th...

View full details
¥1,800 - ¥4,100
¥1,800 - ¥4,100
¥1,800 - ¥4,100
¥1,800

D1 : Pintle Turret Starter Pack

¥3,100 - ¥7,200
¥3,100 - ¥7,200
¥3,100 - ¥7,200
¥3,100

The D-Series Pintle Turrets are designed to fit into the hatches of any standard 30k tank or similarly sized vehicle access point. (Please note: th...

View full details
¥3,100 - ¥7,200
¥3,100 - ¥7,200
¥3,100 - ¥7,200
¥3,100

D1 : Boltfire Pintle Turret

¥1,700 - ¥4,000
¥1,700 - ¥4,000
¥1,700 - ¥4,000
¥1,700

Special Note: The 2 Turret Set includes weapons with shell ejections on opposite sides. The single turret option (Just 1), has its shell ejection o...

View full details
¥1,700 - ¥4,000
¥1,700 - ¥4,000
¥1,700 - ¥4,000
¥1,700

Dragonfire XVIII : Legion Deimos Round Doors

¥1,600 - ¥4,600
¥1,600 - ¥4,600
¥1,600 - ¥4,600
¥1,600

Legion Deimos Round Doors are customized parts that can fit on the Deimos-Pattern Rhino (DPR).* These parts are designed to replace the doors from ...

View full details
¥1,600 - ¥4,600
¥1,600 - ¥4,600
¥1,600 - ¥4,600
¥1,600

Scarab Sons : Legion Deimos Round Doors

¥1,600 - ¥4,600
¥1,600 - ¥4,600
¥1,600 - ¥4,600
¥1,600

Legion Deimos Round Doors are customized parts that can fit on the Deimos-Pattern Rhino (DPR).* These parts are designed to replace the doors from ...

View full details
¥1,600 - ¥4,600
¥1,600 - ¥4,600
¥1,600 - ¥4,600
¥1,600
Malice : Legion Deimos Round Doors 3d printed
Malice : Legion Deimos Round Doors 3d printed

Malice : Legion Deimos Round Doors

¥1,600 - ¥4,600
¥1,600 - ¥4,600
¥1,600 - ¥4,600
¥1,600

Legion Deimos Round Doors are customized parts that can fit on the Deimos-Pattern Rhino (DPR).* These parts are designed to replace the doors from ...

View full details
¥1,600 - ¥4,600
¥1,600 - ¥4,600
¥1,600 - ¥4,600
¥1,600
Sons of Malice : Legion Deimos Round Doors 3d printed
Sons of Malice : Legion Deimos Round Doors 3d printed

Sons of Malice : Legion Deimos Round Doors

¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600

Legion Deimos Round Doors are customized parts that can fit on the Deimos-Pattern Rhino (DPR).* These parts are designed to replace the doors from ...

View full details
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600
Oroboros : Legion Deimos Round Doors 3d printed

Oroboros : Legion Deimos Round Doors

¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600

Legion Deimos Round Doors are customized parts that can fit on the Deimos-Pattern Rhino (DPR).* These parts are designed to replace the doors from ...

View full details
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600 - ¥4,500
¥1,600
Angel Tears : Legion Deimos Round Doors 3d printed
Angel Tears : Legion Deimos Round Doors 3d printed

Angel Tears : Legion Deimos Round Doors

¥1,600 - ¥4,600
¥1,600 - ¥4,600
¥1,600 - ¥4,600
¥1,600

Legion Deimos Round Doors are customized parts that can fit on the Deimos-Pattern Rhino (DPR).* These parts are designed to replace the doors from ...

View full details
¥1,600 - ¥4,600
¥1,600 - ¥4,600
¥1,600 - ¥4,600
¥1,600
Heavy Slugger - R2 Hatch Turrets 3d printed
Heavy Slugger - R2 Hatch Turrets 3d printed

Heavy Slugger - R2 Hatch Turrets

¥2,200 - ¥9,200
¥2,200 - ¥9,200
¥2,200 - ¥9,200
¥2,200

NOTE: The SIZE Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue = 1 Hatch TurretMedium sprue = 2 Hatch TurretsLarge spr...

View full details
¥2,200 - ¥9,200
¥2,200 - ¥9,200
¥2,200 - ¥9,200
¥2,200

Featured collection

60x Maltese Cross : Shoulder Insignia pack 3d printed
60x Maltese Cross : Shoulder Insignia pack 3d printed

60x Maltese Cross : Shoulder Insignia pack

¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200
4x10 Squad Making MultiPack 3d printed
4x10 Squad Making MultiPack 3d printed

4x10 Squad Making MultiPack

¥3,900 - ¥4,200
¥3,900 - ¥4,200
¥3,900 - ¥4,200
¥3,900

This pack contains 10 Tactical, 10 Assault, 10 Devestator, and 10 Comand marks, designed to fit on shoulder-like or rounded area of your favorite m...

View full details
¥3,900 - ¥4,200
¥3,900 - ¥4,200
¥3,900 - ¥4,200
¥3,900
Xenos Hunters: Redemptor Honor Kit 3d printed

Xenos Hunters: Redemptor Honor Kit

¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400

These bits are designed to fit the Primaris Redemptor dreadnought model. They're meant to give your standard kit a unique look and provide raised e...

View full details
¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400
Prime Marine - Adjustable Arms (PM) 3d printed
Prime Marine - Adjustable Arms (PM) 3d printed

Prime Marine - Adjustable Arms (PM)

¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms)Medium sprue = 10 Sets (20 tot...

View full details
¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800
Deathwatch Set 1 : Shoulder Insignia pack 3d printed

Deathwatch Set 1 : Shoulder Insignia pack

¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200
60x Kings Fist - Shoulder Insignia pack 3d printed
60x Kings Fist - Shoulder Insignia pack 3d printed

60x Kings Fist - Shoulder Insignia pack

¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200

Antonis : Arch Battleknight Conversion Kit

¥6,000 - ¥11,500
¥6,000 - ¥11,500
¥6,000 - ¥11,500
¥6,000

This conversion kit is designed to fit a standard GW Nemesis Dreadknight model kit. It is not a full model, just parts to add to your model kit to ...

View full details
¥6,000 - ¥11,500
¥6,000 - ¥11,500
¥6,000 - ¥11,500
¥6,000
10x Base - Crested G:10 Prime Helmets 3d printed
10x Base - Crested G:10 Prime Helmets 3d printed

10x Base - Crested G:11 Prime Helmets

¥3,000 - ¥3,000
¥3,000
¥3,000 - ¥3,000
¥3,000

The G:11 Prime Helmets were designed by the free-blade artist, Cornivius. It was inspired by the new Primaries models with a subtle ancient greek h...

View full details
¥3,000 - ¥3,000
¥3,000
¥3,000 - ¥3,000
¥3,000
60x Ultra Legion - Shoulder Insignia pack 3d printed
60x Ultra Legion - Shoulder Insignia pack 3d printed

60x Ultra Legion - Shoulder Insignia pack

¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200
Gen:3 Iron - Adjustable Arms 3d printed
Gen:3 Iron - Adjustable Arms 3d printed Small = 5 Sets / Medium = 10 Sets

Gen:3 Iron - Adjustable Arms

¥2,800 - ¥4,300
¥2,800 - ¥4,300
¥2,800 - ¥4,300
¥2,800

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms) Medium sprue = 10 Sets (20 to...

View full details
¥2,800 - ¥4,300
¥2,800 - ¥4,300
¥2,800 - ¥4,300
¥2,800
Deathwatch Set 2 : Shoulder Insignia pack 3d printed
Deathwatch Set 2 : Shoulder Insignia pack 3d printed

Deathwatch Set 2 : Shoulder Insignia pack

¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200

This insignia pack is designed to fit on any shoulder or rounded area of your favorite models. (YES, they fit the new marines) They are meant to pe...

View full details
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200
View all Collection
View all Collection
Shop collection