Monkey Resin 3

Monkey Resin 3 is a high-quality UV cured resin that will come attached to a support structure from the production process. The parts are however, pre-cleaned and ready for primer once removed. Use only super glue to adhere these parts to your models.

To remove the bits from their supports: submerge the whole assembly in water that is hot to the touch for 5 minutes. Use your fingernail to punch away several supports to create a starting point, and carefully peel your parts off of the remaining supports all together.

You can use a very fine-grit sandpaper if needed to smooth any surface or feature further. Always be sure to wear a mask when working around resin dust.

Sort by

View as

Rhinoback - Impulsor Conversion Kit

¥4,400 - ¥4,400

¥4,400

¥4,400 - ¥4,400

¥4,400

The Rhinoback crew compartment comes in 4 pieces and meant to fit onto the back section of the Primaris Impulsor kit. The Tailgate slots into a wor...

View full details

¥4,400 - ¥4,400

¥4,400

¥4,400 - ¥4,400

¥4,400

Twin Rapfire - R1 Hatch Turrets 3d printed

Twin Rapfire - R1 Hatch Turrets 3d printed Small = 1 Hatch Turret

R1 : Twin Rapfire Hatch Turret

¥1,700 - ¥6,500

¥1,700

The R-Series Hatch Turrets are designed to fit into the hatches of any standard 40k tank or similarly sized vehicle access point. However, they are...

View full details

¥1,700 - ¥6,500

¥1,700

Shaggy Wolf : Full Rhinoback Impulsor Kit

¥5,000 - ¥5,000

¥5,000

¥5,000 - ¥5,000

¥5,000

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details

¥5,000 - ¥5,000

¥5,000

¥5,000 - ¥5,000

¥5,000

Angel Tears : Full Rhinoback Impulsor Kit

¥5,000 - ¥5,000

¥5,000

¥5,000 - ¥5,000

¥5,000

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details

¥5,000 - ¥5,000

¥5,000

¥5,000 - ¥5,000

¥5,000

Winged Sword : Full Rhinoback Impulsor Kit

¥5,000 - ¥5,000

¥5,000

¥5,000 - ¥5,000

¥5,000

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details

¥5,000 - ¥5,000

¥5,000

¥5,000 - ¥5,000

¥5,000

Impala Defensive System Mounting Kit (Magnet-Ready)

¥4,000 - ¥4,000

¥4,000

¥4,000 - ¥4,000

¥4,000

The Impala Defensive System Mounting Kit is designed to integrate seamlessly with our Rhinoback crew compartment conversion kit. However, the magne...

View full details

¥4,000 - ¥4,000

¥4,000

¥4,000 - ¥4,000

¥4,000

Meltafire - R1 Hatch Turrets 3d printed Small = 1 Hatch Turret

R1 : Thermobolt Hatch Turrets

¥1,700 - ¥7,200

¥1,700

The R-Series Hatch Turrets are designed to fit into the hatches of any standard 40k tank or similarly sized vehicle access point. However, they are...

View full details

¥1,700 - ¥7,200

¥1,700

Kings Fist : Full Rhinoback Impulsor Kit

¥5,000 - ¥5,000

¥5,000

¥5,000 - ¥5,000

¥5,000

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details

¥5,000 - ¥5,000

¥5,000

¥5,000 - ¥5,000

¥5,000

Ultra Legion : Full Rhinoback Impulsor Kit

¥5,000 - ¥5,000

¥5,000

¥5,000 - ¥5,000

¥5,000

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details

¥5,000 - ¥5,000

¥5,000

¥5,000 - ¥5,000

¥5,000

Maltese Cross : Impulsor Branding Kit 1 3d printed

Maltese Cross : Impala Branding Kit 1

¥3,400 - ¥6,600

¥3,400

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details

¥3,400 - ¥6,600

¥3,400

Xenos Hunters: Top-Hatch Component

¥2,200 - ¥3,600

¥2,200

This top-hatch component is designed to fit onto a Rhino chassis (both 40k and 30k scale) or to be used with our Rhinoback crew compartment convers...

View full details

¥2,200 - ¥3,600

¥2,200

Shaggy Wolf: Impulsor Branding Kit 1 3d printed

Shaggy Wolf: Impala Branding Kit 1

¥3,400 - ¥6,500

¥3,400

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details

¥3,400 - ¥6,500

¥3,400

Shaggy Wolf : Impulsor Front Plate 1 3d printed

Shaggy Wolf : Impala Front Plate 1

¥2,900 - ¥5,100

¥2,900

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details

¥2,900 - ¥5,100

¥2,900

Xenos Hunters : Full Rhinoback Impulsor Kit 2

¥5,000 - ¥5,000

¥5,000

¥5,000 - ¥5,000

¥5,000

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details

¥5,000 - ¥5,000

¥5,000

¥5,000 - ¥5,000

¥5,000

Xenos Hunters : Full Rhinoback Impulsor Kit 1

¥5,000 - ¥5,000

¥5,000

¥5,000 - ¥5,000

¥5,000

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details

¥5,000 - ¥5,000

¥5,000

¥5,000 - ¥5,000

¥5,000

Neptune Spears : Full Rhinoback Impulsor Kit

¥5,000 - ¥5,000

¥5,000

¥5,000 - ¥5,000

¥5,000

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details

¥5,000 - ¥5,000

¥5,000

¥5,000 - ¥5,000

¥5,000

Kings Fist: Impulsor Branding Kit 1 3d printed

Kings Fist: Impulsor Branding Kit 1 3d printed These components are designed to be able to fit the Primaris Impulsor kit.

Kings Fist: Impala Branding Kit 1

¥3,400 - ¥6,600

¥3,400

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details

¥3,400 - ¥6,600

¥3,400

Angel Tears : Impulsor Front Plate 1 3d printed

Angel Tears : Impala Front Plate 1

¥2,900 - ¥5,100

¥2,900

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details

¥2,900 - ¥5,100

¥2,900

Maltese Cross : Impulsor Front Plate 1 3d printed

Maltese Cross : Impala Front Plate 1

¥2,900 - ¥5,100

¥2,900

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details

¥2,900 - ¥5,100

¥2,900

Xenos Hunters : Impala Front Plate 1

¥2,900 - ¥5,100

¥2,900

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details

¥2,900 - ¥5,100

¥2,900

Dragon Heads : Full Rhinoback Impala Kit 3

¥5,000 - ¥5,000

¥5,000

¥5,000 - ¥5,000

¥5,000

Our Rhinoback Impala is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your tr...

View full details

¥5,000 - ¥5,000

¥5,000

¥5,000 - ¥5,000

¥5,000

Neptune Spears : Impulsor Branding Kit 3d printed

Neptune Spears : Impala Branding Kit

¥3,400 - ¥6,600

¥3,400

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details

¥3,400 - ¥6,600

¥3,400

Flamefire - R1 Hatch Turrets 3d printed Small = 1 Hatch Turret

R1: Flamebolt Hatch Turrets

¥1,700 - ¥7,000

¥1,700

The R-Series Hatch Turrets are designed to fit into the hatches of any standard 40k tank or similarly sized vehicle access point. However, they are...

View full details

¥1,700 - ¥7,000

¥1,700

4 Piece Combo - R1 Hatch Turrets 3d printed Similar Product with Vehicle Insignia on the top.

4 Piece Combo - R1 Hatch Turrets 3d printed

R1 : Hatch Turret 4 Piece Combo

¥3,600 - ¥7,200

¥3,600

This kit includes: 1 Twin Rapfire, 1 Flamefire, 1 Meltafire, & 1 Plasfire TurretThe R-Series Hatch Turrets are designed to fit into the hatche...

View full details

¥3,600 - ¥7,200

¥3,600

Angel Tears : Impulsor Branding Kit 1 3d printed

Angel Tears : Impulsor Branding Kit 1 3d printed These components are designed to be able to fit the Primaris Impulsor kit

Angel Tears : Impala Branding Kit 1

¥3,400 - ¥6,600

¥3,400

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details

¥3,400 - ¥6,600

¥3,400

Hav-Launcher - R1 Hatch Turrets 3d printed

R1 : Hav-Launcher Hatch Turrets

¥1,800 - ¥9,100

¥1,800

The R-Series Hatch Turrets are designed to fit into the hatches of any standard 40k tank or similarly sized vehicle access point. However, they are...

View full details

¥1,800 - ¥9,100

¥1,800

Winged Sword : Impulsor Front Plate 1 3d printed

Winged Sword : Impala Front Plate 1

¥1,800 - ¥5,100

¥1,800

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details

¥1,800 - ¥5,100

¥1,800

Dragon Heads : Full Rhinoback Impala Kit 4

¥5,000 - ¥5,000

¥5,000

¥5,000 - ¥5,000

¥5,000

Our Rhinoback Impala is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your tr...

View full details

¥5,000 - ¥5,000

¥5,000

¥5,000 - ¥5,000

¥5,000

Ultra Legion: Impulsor Branding Kit 1 3d printed

Ultra Legion: Impala Branding Kit 1

¥3,400 - ¥6,600

¥3,400

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details

¥3,400 - ¥6,600

¥3,400

Plasfire - R1 Hatch Turrets 3d printed Small = 1 Hatch Turret

R1 : Plasbolt Hatch Turrets

¥1,700 - ¥7,000

¥1,700

The R-Series Hatch Turrets are designed to fit into the hatches of any standard 40k tank or similarly sized vehicle access point. However, they are...

View full details

¥1,700 - ¥7,000

¥1,700

Skulls & Crosses : Impulsor Front Plate 3d printed

Skulls & Crosses : Impala Front Plate

¥2,900 - ¥5,100

¥2,900

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details

¥2,900 - ¥5,100

¥2,900

Flip-Top Rhino Hatch : V1b Hunter Missile Launcher (Studded)

¥2,700 - ¥4,300

¥2,700

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. ...

View full details

¥2,700 - ¥4,300

¥2,700

Flip-Top Rhino Hatch : V1a Hunter Missile Launcher

¥2,700 - ¥4,300

¥2,700

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. ...

View full details

¥2,700 - ¥4,300

¥2,700

Alpha Omega : Top-Hatch Doors

¥2,200 - ¥3,500

¥2,200

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. T...

View full details

¥2,200 - ¥3,500

¥2,200

D1 : Twin Rapfire Pintle Turret

¥1,700 - ¥4,000

¥1,700

The D-Series Pintle Turrets are designed to fit into the hatches of any standard 30k tank or similarly sized vehicle access point. (Please note: th...

View full details

¥1,700 - ¥4,000

¥1,700

Storm Scars : Impala Front Plate 1

¥2,900 - ¥5,100

¥2,900

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details

¥2,900 - ¥5,100

¥2,900

Blood Wraiths : Impulsor Front Plate 3d printed

Blood Wraiths : Impala Front Plate

¥3,000 - ¥5,200

¥3,000

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details

¥3,000 - ¥5,200

¥3,000

the Kracken : Impulsor Branding Kit 2 3d printed

the Kracken : Impala Branding Kit 2

¥3,400 - ¥6,600

¥3,400

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details

¥3,400 - ¥6,600

¥3,400

Spikes & Chain : Impulsor Front Plate 3d printed

Spikes & Chain : Impala Front Plate

¥2,900 - ¥5,100

¥2,900

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details

¥2,900 - ¥5,100

¥2,900

Kings Fist : Impulsor Front Plate 1 3d printed

Kings Fist : Impulsor Front Plate 1 3d printed It replaces the associated part of the Impulsor kit.

Kings Fist : Impala Front Plate 1

¥2,900 - ¥5,100

¥2,900

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details

¥2,900 - ¥5,100

¥2,900

Ultra Legion : Impulsor Front Plate 1 3d printed

Ultra Legion : Impala Front Plate 1

¥2,900 - ¥5,100

¥2,900

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details

¥2,900 - ¥5,100

¥2,900

Dragon Heads : Full Rhinoback Impulsor Kit 2

¥5,000 - ¥5,000

¥5,000

¥5,000 - ¥5,000

¥5,000

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details

¥5,000 - ¥5,000

¥5,000

¥5,000 - ¥5,000

¥5,000

Exquisite Bane : Top-Hatch Doors

¥2,200 - ¥3,500

¥2,200

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. T...

View full details

¥2,200 - ¥3,500

¥2,200

Storm Legion : Top-Hatch Doors

¥2,200 - ¥3,500

¥2,200

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. T...

View full details

¥2,200 - ¥3,500

¥2,200

Scarab Sons : Top-Hatch Doors

¥2,200 - ¥3,500

¥2,200

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. T...

View full details

¥2,200 - ¥3,500

¥2,200

Nightmare Legion : Top-Hatch Doors

¥2,200 - ¥3,500

¥2,200

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. T...

View full details

¥2,200 - ¥3,500

¥2,200

Knight Star & Checkerboard : Top-Hatch Doors

¥2,200 - ¥3,500

¥2,200

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. T...

View full details

¥2,200 - ¥3,500

¥2,200

Dragon Head : Top-Hatch Doors

¥2,200 - ¥3,500

¥2,200

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. T...

View full details

¥2,200 - ¥3,500

¥2,200

Featured collection

60x Maltese Cross : Shoulder Insignia pack

¥4,200 - ¥4,600

¥4,200

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details

¥4,200 - ¥4,600

¥4,200

4x10 Squad Making MultiPack

¥3,900 - ¥4,200

¥3,900

This pack contains 10 Tactical, 10 Assault, 10 Devestator, and 10 Comand marks, designed to fit on shoulder-like or rounded area of your favorite m...

View full details

¥3,900 - ¥4,200

¥3,900

Xenos Hunters: Redemptor Honor Kit

¥2,400 - ¥3,900

¥2,400

These bits are designed to fit the Primaris Redemptor dreadnought model. They're meant to give your standard kit a unique look and provide raised e...

View full details

¥2,400 - ¥3,900

¥2,400

Prime Marine - Adjustable Arms (PM)

¥2,800 - ¥4,200

¥2,800

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue = 5 Sets (10 total arms)Medium sprue = 10 Sets (20 tot...

View full details

¥2,800 - ¥4,200

¥2,800

Deathwatch Set 1 : Shoulder Insignia pack

¥4,200 - ¥4,600

¥4,200

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details

¥4,200 - ¥4,600

¥4,200

60x Kings Fist - Shoulder Insignia pack

¥4,200 - ¥4,600

¥4,200

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details

¥4,200 - ¥4,600

¥4,200

Antonis : Arch Battleknight Conversion Kit

¥6,000 - ¥11,500

¥6,000

This conversion kit is designed to fit a standard GW Nemesis Dreadknight model kit. It is not a full model, just parts to add to your model kit to ...

View full details

¥6,000 - ¥11,500

¥6,000

10x Base - Crested G:10 Prime Helmets 3d printed

10x Base - Crested G:11 Prime Helmets

¥3,000 - ¥3,000

¥3,000

¥3,000 - ¥3,000

¥3,000

The G:11 Prime Helmets were designed by the free-blade artist, Cornivius. It was inspired by the new Primaries models with a subtle ancient greek h...

View full details

¥3,000 - ¥3,000

¥3,000

¥3,000 - ¥3,000

¥3,000

60x Ultra Legion - Shoulder Insignia pack

¥4,200 - ¥4,600

¥4,200

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details

¥4,200 - ¥4,600

¥4,200

Gen:3 Iron - Adjustable Arms

¥2,800 - ¥4,300

¥2,800

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue = 5 Sets (10 total arms) Medium sprue = 10 Sets (20 to...

View full details

¥2,800 - ¥4,300

¥2,800

Deathwatch Set 2 : Shoulder Insignia pack

¥4,200 - ¥4,600

¥4,200

This insignia pack is designed to fit on any shoulder or rounded area of your favorite models. (YES, they fit the new marines) They are meant to pe...

View full details

¥4,200 - ¥4,600

¥4,200

View all Collection

Shop collection

Country

Country

Monkey Resin 3

Featured collection

Country

Country