Skip to content
Insignias Full Models Conv.Kits Marines Head Swaps Weapons Shields Vehicle Parts Walkers

Monkey Resin 3

Monkey Resin 3 is a high-quality UV cured resin that will come attached to a support structure from the production process. The parts are however, pre-cleaned and ready for primer once removed. Use only super glue to adhere these parts to your models.

To remove the bits from their supports: submerge the whole assembly in water that is hot to the touch for 5 minutes. Use your fingernail to punch away several supports to create a starting point, and carefully peel your parts off of the remaining supports all together.

You can use a very fine-grit sandpaper if needed to smooth any surface or feature further. Always be sure to wear a mask when working around resin dust.

Pyramid Spikes : Top-Hatch Doors

¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. T...

View full details
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

Wrecker Legion : Top-Hatch Doors

¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. T...

View full details
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

Studded : Top-Hatch Doors

¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. T...

View full details
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

Chevron Hazards : Top-Hatch Doors

¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

This top-hatch component is designed to fit onto a Rhino chassis (40k and 30k scale) or to be used with our Rhinoback crew compartment conversion k...

View full details
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

Hazard Stripes : Top-Hatch Doors

¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

This top-hatch component is designed to fit onto a Rhino chassis (40k and 30k scale) or to be used with our Rhinoback crew compartment conversion k...

View full details
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

D1 : Boltfire Pintle Turret

¥1,700 - ¥4,000
¥1,700 - ¥4,000
¥1,700 - ¥4,000
¥1,700

Special Note: The 2 Turret Set includes weapons with shell ejections on opposite sides. The single turret option (Just 1), has its shell ejection o...

View full details
¥1,700 - ¥4,000
¥1,700 - ¥4,000
¥1,700 - ¥4,000
¥1,700
VoidScale : Impala Front Plate 3d printed
VoidScale : Impala Front Plate 3d printed

VoidScale : Impala Front Plate

¥2,900 - ¥5,100
¥2,900 - ¥5,100
¥2,900 - ¥5,100
¥2,900

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details
¥2,900 - ¥5,100
¥2,900 - ¥5,100
¥2,900 - ¥5,100
¥2,900
Machinists: Impala Front Plate 2 3d printed
Machinists: Impala Front Plate 2 3d printed

Machinists : Impala Front Plate 2

¥2,900 - ¥5,100
¥2,900 - ¥5,100
¥2,900 - ¥5,100
¥2,900

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details
¥2,900 - ¥5,100
¥2,900 - ¥5,100
¥2,900 - ¥5,100
¥2,900
Skull Wall : Impulsor Front Plate 3d printed
Skull Wall : Impulsor Front Plate 3d printed

Skull Wall : Impala Front Plate

¥2,900 - ¥5,100
¥2,900 - ¥5,100
¥2,900 - ¥5,100
¥2,900

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details
¥2,900 - ¥5,100
¥2,900 - ¥5,100
¥2,900 - ¥5,100
¥2,900
Neptune Spears : Impulsor Front Plate 3d printed
Neptune Spears : Impulsor Front Plate 3d printed

Neptune Spears : Impala Front Plate

¥2,900 - ¥5,100
¥2,900 - ¥5,100
¥2,900 - ¥5,100
¥2,900

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details
¥2,900 - ¥5,100
¥2,900 - ¥5,100
¥2,900 - ¥5,100
¥2,900
Shadow Vipers : Impala Branding Kit 1 3d printed
Shadow Vipers : Impala Branding Kit 1 3d printed

Shadow Vipers : Impala Branding Kit 1

¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details
¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400

Dragon Heads : Full Rhinoback Impulsor Kit 1

¥5,000 - ¥5,000
¥5,000
¥5,000 - ¥5,000
¥5,000

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details
¥5,000 - ¥5,000
¥5,000
¥5,000 - ¥5,000
¥5,000

the Kracken : Full Rhinoback Impulsor Kit 2

¥5,000 - ¥5,000
¥5,000
¥5,000 - ¥5,000
¥5,000

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details
¥5,000 - ¥5,000
¥5,000
¥5,000 - ¥5,000
¥5,000

the Kracken : Full Rhinoback Impulsor Kit

¥5,000 - ¥5,000
¥5,000
¥5,000 - ¥5,000
¥5,000

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details
¥5,000 - ¥5,000
¥5,000
¥5,000 - ¥5,000
¥5,000

Demon Claw : Top-Hatch Doors

¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. T...

View full details
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

Chaos Wheel : Top-Hatch Doors

¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. T...

View full details
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

World Wreckers : Top-Hatch Doors

¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. T...

View full details
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

Warmasters Eye : Top-Hatch Doors

¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. T...

View full details
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

Storm Scars Tactical : Top-Hatch Doors

¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. T...

View full details
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

Red Raven Elite/Support : Top-Hatch Doors

¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. T...

View full details
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

Red Raven XIX : Top-Hatch Doors

¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. T...

View full details
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

Plague Sun : Top-Hatch Doors

¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. T...

View full details
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

Mech Hands : Top-Hatch Doors

¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. T...

View full details
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

Knight Legion : Top-Hatch Doors

¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. T...

View full details
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

Hydra Legion : Top-Hatch Doors

¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. T...

View full details
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

Dragonfire Legion : Top-Hatch Doors

¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. T...

View full details
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

Burning Demon : Top-Hatch Doors

¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. T...

View full details
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

Angel Tears : Top-Hatch Doors

¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. T...

View full details
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

Blank/Half-Pyramid Spike : Top-Hatch Doors

¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. T...

View full details
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

Wolf Rampant : Top-Hatch Doors

¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. T...

View full details
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

Ultra Legion : Top-Hatch Doors

¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. T...

View full details
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

Kings Fist : Top-Hatch Doors

¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. T...

View full details
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

Emperor's Third : Top-Hatch Doors

¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. T...

View full details
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

Tactical/Devastator : Top-Hatch Doors

¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. T...

View full details
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

Blank/Half-Studded : Top-Hatch Doors

¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale), as well as our Rhinoback crew compartment conversion kit. T...

View full details
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

Double Blank : Top-Hatch Doors

¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

This top-hatch component is designed to fit any Rhino chassis (both 40k and 30k scale) or our Rhinoback crew compartment conversion kit. It feature...

View full details
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

MG:102 - Impala Anti-Air Turret

¥2,700 - ¥5,800
¥2,700 - ¥5,800
¥2,700 - ¥5,800
¥2,700

This custom turret is designed to give your Impala a unique look. It is compatible with our Rhinoback conversion kit.  Sculpted by our Sanctioned A...

View full details
¥2,700 - ¥5,800
¥2,700 - ¥5,800
¥2,700 - ¥5,800
¥2,700
Black Dragons : Impala Branding Kit 2 3d printed

Black Dragons : Impala Branding Kit 2

¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details
¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400
Black Dragons : Impala Branding Kit 1 3d printed
Black Dragons : Impala Branding Kit 1 3d printed

Black Dragons : Impala Branding Kit 1

¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details
¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400
Clan Amphisbaena : Impala Front Plate 1 3d printed
Clan Amphisbaena : Impala Front Plate 1 3d printed

Clan Amphisbaena : Impala Front Plate 1

¥2,900 - ¥5,100
¥2,900 - ¥5,100
¥2,900 - ¥5,100
¥2,900

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details
¥2,900 - ¥5,100
¥2,900 - ¥5,100
¥2,900 - ¥5,100
¥2,900
Clan Amphisbaena: Impala Front Plate 2 3d printed
Clan Amphisbaena: Impala Front Plate 2 3d printed

Clan Amphisbaena: Impala Front Plate 2

¥2,900 - ¥5,100
¥2,900 - ¥5,100
¥2,900 - ¥5,100
¥2,900

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details
¥2,900 - ¥5,100
¥2,900 - ¥5,100
¥2,900 - ¥5,100
¥2,900
Machinists : Impala Front Plate1 3d printed
Machinists : Impala Front Plate1 3d printed

Machinists : Impala Front Plate1

¥2,900 - ¥5,100
¥2,900 - ¥5,100
¥2,900 - ¥5,100
¥2,900

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details
¥2,900 - ¥5,100
¥2,900 - ¥5,100
¥2,900 - ¥5,100
¥2,900
Blood Wraiths : Impulsor Branding Kit 3d printed
Blood Wraiths : Impulsor Branding Kit 3d printed

Blood Wraiths : Impala Branding Kit

¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details
¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400
Shadow Vipers : Impala Branding Kit 2 3d printed
Shadow Vipers : Impala Branding Kit 2 3d printed

Shadow Vipers : Impala Branding Kit 2

¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400

The Impala Branding Kits are designed to enhance the Primaris Impulsor model, giving it a distinctive and cohesive appearance that complements your...

View full details
¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400 - ¥6,600
¥3,400
Voidscale: Top-Hatch Component 3d printed
Voidscale: Top-Hatch Component 3d printed

Voidscale: Top-Hatch Component

¥2,200 - ¥3,600
¥2,200 - ¥3,600
¥2,200 - ¥3,600
¥2,200

This top-hatch component is designed to fit onto a Rhino chassis (both 40k and 30k scale) or to be used with our Rhinoback crew compartment convers...

View full details
¥2,200 - ¥3,600
¥2,200 - ¥3,600
¥2,200 - ¥3,600
¥2,200

Xenos Hunters : Impala Front Plate 2

¥2,900 - ¥5,100
¥2,900 - ¥5,100
¥2,900 - ¥5,100
¥2,900

This Impala Front Plate can replace the corresponding part on a Primaris Impulsor model, giving it a unique and cohesive look that aligns with its ...

View full details
¥2,900 - ¥5,100
¥2,900 - ¥5,100
¥2,900 - ¥5,100
¥2,900

Shadow Vipers : Full Rhinoback Impulsor Kit 2

¥5,000 - ¥5,000
¥5,000
¥5,000 - ¥5,000
¥5,000

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details
¥5,000 - ¥5,000
¥5,000
¥5,000 - ¥5,000
¥5,000

Shadow Vipers : Full Rhinoback Impulsor Kit 1

¥5,000 - ¥5,000
¥5,000
¥5,000 - ¥5,000
¥5,000

Our Rhinoback Impulsor is a variant of the standard Primaris Impulsor design that incorporates an enclosed crew compartment to better protect your ...

View full details
¥5,000 - ¥5,000
¥5,000
¥5,000 - ¥5,000
¥5,000

Featured collection

60x Maltese Cross : Shoulder Insignia pack 3d printed
60x Maltese Cross : Shoulder Insignia pack 3d printed

60x Maltese Cross : Shoulder Insignia pack

¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200
4x10 Squad Making MultiPack 3d printed
4x10 Squad Making MultiPack 3d printed

4x10 Squad Making MultiPack

¥3,900 - ¥4,200
¥3,900 - ¥4,200
¥3,900 - ¥4,200
¥3,900

This pack contains 10 Tactical, 10 Assault, 10 Devestator, and 10 Comand marks, designed to fit on shoulder-like or rounded area of your favorite m...

View full details
¥3,900 - ¥4,200
¥3,900 - ¥4,200
¥3,900 - ¥4,200
¥3,900
Xenos Hunters: Redemptor Honor Kit 3d printed

Xenos Hunters: Redemptor Honor Kit

¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400

These bits are designed to fit the Primaris Redemptor dreadnought model. They're meant to give your standard kit a unique look and provide raised e...

View full details
¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400
Prime Marine - Adjustable Arms (PM) 3d printed
Prime Marine - Adjustable Arms (PM) 3d printed

Prime Marine - Adjustable Arms (PM)

¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms)Medium sprue = 10 Sets (20 tot...

View full details
¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800
Deathwatch Set 1 : Shoulder Insignia pack 3d printed

Deathwatch Set 1 : Shoulder Insignia pack

¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200
60x Kings Fist - Shoulder Insignia pack 3d printed
60x Kings Fist - Shoulder Insignia pack 3d printed

60x Kings Fist - Shoulder Insignia pack

¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200

Antonis : Arch Battleknight Conversion Kit

¥6,000 - ¥11,500
¥6,000 - ¥11,500
¥6,000 - ¥11,500
¥6,000

This conversion kit is designed to fit a standard GW Nemesis Dreadknight model kit. It is not a full model, just parts to add to your model kit to ...

View full details
¥6,000 - ¥11,500
¥6,000 - ¥11,500
¥6,000 - ¥11,500
¥6,000
10x Base - Crested G:10 Prime Helmets 3d printed
10x Base - Crested G:10 Prime Helmets 3d printed

10x Base - Crested G:11 Prime Helmets

¥3,000 - ¥3,000
¥3,000
¥3,000 - ¥3,000
¥3,000

The G:11 Prime Helmets were designed by the free-blade artist, Cornivius. It was inspired by the new Primaries models with a subtle ancient greek h...

View full details
¥3,000 - ¥3,000
¥3,000
¥3,000 - ¥3,000
¥3,000
60x Ultra Legion - Shoulder Insignia pack 3d printed
60x Ultra Legion - Shoulder Insignia pack 3d printed

60x Ultra Legion - Shoulder Insignia pack

¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200
Gen:3 Iron - Adjustable Arms 3d printed
Gen:3 Iron - Adjustable Arms 3d printed Small = 5 Sets / Medium = 10 Sets

Gen:3 Iron - Adjustable Arms

¥2,800 - ¥4,300
¥2,800 - ¥4,300
¥2,800 - ¥4,300
¥2,800

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms) Medium sprue = 10 Sets (20 to...

View full details
¥2,800 - ¥4,300
¥2,800 - ¥4,300
¥2,800 - ¥4,300
¥2,800
Deathwatch Set 2 : Shoulder Insignia pack 3d printed
Deathwatch Set 2 : Shoulder Insignia pack 3d printed

Deathwatch Set 2 : Shoulder Insignia pack

¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200

This insignia pack is designed to fit on any shoulder or rounded area of your favorite models. (YES, they fit the new marines) They are meant to pe...

View full details
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200
View all Collection
View all Collection
Shop collection