Skip to content
Insignias Full Models Conv.Kits Marines Head Swaps Weapons Shields Vehicle Parts Walkers

Monkey Resin 3

Monkey Resin 3 is a high-quality UV cured resin that will come attached to a support structure from the production process. The parts are however, pre-cleaned and ready for primer once removed. Use only super glue to adhere these parts to your models.

To remove the bits from their supports: submerge the whole assembly in water that is hot to the touch for 5 minutes. Use your fingernail to punch away several supports to create a starting point, and carefully peel your parts off of the remaining supports all together.

You can use a very fine-grit sandpaper if needed to smooth any surface or feature further. Always be sure to wear a mask when working around resin dust.

Angel Tears : Mark-1 APC Round Doors 3d printed
Angel Tears : Mark-1 APC Round Doors 3d printed

Angel Tears : Mark-1 APC Round Doors

¥3,000 - ¥4,800
¥3,000 - ¥4,800
¥3,000 - ¥4,800
¥3,000

These custom designed inserts will fit into the square door cavities of a standard Rhino kit like a plug, with the reverse side giving your model a...

View full details
¥3,000 - ¥4,800
¥3,000 - ¥4,800
¥3,000 - ¥4,800
¥3,000
Sorcerer Sun : Mark-1 APC Round Doors 3d printed
Sorcerer Sun : Mark-1 APC Round Doors 3d printed

Sorcerer Sun : Mark-1 APC Round Doors

¥3,000 - ¥5,000
¥3,000 - ¥5,000
¥3,000 - ¥5,000
¥3,000

These custom designed inserts will fit into the square door cavities of a standard Rhino kit like a plug, with the reverse side giving your model a...

View full details
¥3,000 - ¥5,000
¥3,000 - ¥5,000
¥3,000 - ¥5,000
¥3,000
Sun Scarabs : Mark-1 APC Round Doors 3d printed
Sun Scarabs : Mark-1 APC Round Doors 3d printed

Sun Scarabs : Mark-1 APC Round Doors

¥3,000 - ¥5,100
¥3,000 - ¥5,100
¥3,000 - ¥5,100
¥3,000

These custom designed inserts will fit into the square door cavities of a standard Rhino kit like a plug, with the reverse side giving your model a...

View full details
¥3,000 - ¥5,100
¥3,000 - ¥5,100
¥3,000 - ¥5,100
¥3,000
Sun Scarabs : Mark-2 APC Round Doors 3d printed
Sun Scarabs : Mark-2 APC Round Doors 3d printed

Sun Scarabs : Mark-2 APC Round Doors

¥2,700 - ¥4,700
¥2,700 - ¥4,700
¥2,700 - ¥4,700
¥2,700

These custom designed inserts will fit into the square door cavities of a standard Rhino kit like a plug, with the reverse side giving your model a...

View full details
¥2,700 - ¥4,700
¥2,700 - ¥4,700
¥2,700 - ¥4,700
¥2,700
Death Team : Standard APC Conversion Kit 3d printed
Death Team : Standard APC Conversion Kit 3d printed

Death Team : Standard APC Conversion Kit

¥3,700 - ¥5,300
¥3,700 - ¥5,300
¥3,700 - ¥5,300
¥3,700

The Armored Personnel Carrier (APC) Conversion Kit features a custom front plate and doors designed to replace the corresponding parts of the stand...

View full details
¥3,700 - ¥5,300
¥3,700 - ¥5,300
¥3,700 - ¥5,300
¥3,700
Death Team : Mark-2 APC Conversion Kit 3d printed

Death Team : Mark-2 APC Conversion Kit

¥4,300 - ¥6,500
¥4,300 - ¥6,500
¥4,300 - ¥6,500
¥4,300

The Armored Personnel Carrier (APC) Conversion Kit features a custom front plate and doors designed to replace the corresponding parts of the stand...

View full details
¥4,300 - ¥6,500
¥4,300 - ¥6,500
¥4,300 - ¥6,500
¥4,300
Angel Tears : Mark-2 APC Conversion Kit 3d printed

Angel Tears : Mark-2 APC Conversion Kit

¥4,200 - ¥6,200
¥4,200 - ¥6,200
¥4,200 - ¥6,200
¥4,200

The Armored Personnel Carrier (APC) Conversion Kit features a custom front plate and doors designed to replace the corresponding parts of the stand...

View full details
¥4,200 - ¥6,200
¥4,200 - ¥6,200
¥4,200 - ¥6,200
¥4,200
Maltese Cross : Mark-2 APC Conversion Kit 3d printed
Maltese Cross : Mark-2 APC Conversion Kit 3d printed

Maltese Cross : Mark-2 APC Conversion Kit

¥4,000 - ¥6,000
¥4,000 - ¥6,000
¥4,000 - ¥6,000
¥4,000

The Armored Personnel Carrier (APC) Conversion Kit features a custom front plate and doors designed to replace the corresponding parts of the stand...

View full details
¥4,000 - ¥6,000
¥4,000 - ¥6,000
¥4,000 - ¥6,000
¥4,000
Blood Wing : Mark-2 APC Conversion Kit 3d printed
Blood Wing : Mark-2 APC Conversion Kit 3d printed

Blood Wing : Mark-2 APC Conversion Kit

¥4,000 - ¥6,000
¥4,000 - ¥6,000
¥4,000 - ¥6,000
¥4,000

The Armored Personnel Carrier (APC) Conversion Kit features a custom front plate and doors designed to replace the corresponding parts of the stand...

View full details
¥4,000 - ¥6,000
¥4,000 - ¥6,000
¥4,000 - ¥6,000
¥4,000

World Wreckers : Standard APC Conv. Kit 2

¥3,400 - ¥3,400
¥3,400
¥3,400 - ¥3,400
¥3,400

The Armored Personnel Carrier (APC) Conversion Kit features a custom front plate and doors designed to replace the corresponding parts of the stand...

View full details
¥3,400 - ¥3,400
¥3,400
¥3,400 - ¥3,400
¥3,400

World Wreckers : Neo-Mark APC Conv. Kit

¥4,200 - ¥4,200
¥4,200
¥4,200 - ¥4,200
¥4,200

The Armored Personnel Carrier (APC) Conversion Kit features a custom front plate and doors designed to replace the corresponding parts of the stand...

View full details
¥4,200 - ¥4,200
¥4,200
¥4,200 - ¥4,200
¥4,200

Wrecker Legion : Standard APC Conv. Kit

¥3,400 - ¥3,400
¥3,400
¥3,400 - ¥3,400
¥3,400

The Armored Personnel Carrier (APC) Conversion Kit features a custom front plate and doors designed to replace the corresponding parts of the stand...

View full details
¥3,400 - ¥3,400
¥3,400
¥3,400 - ¥3,400
¥3,400

World Wreckers : Standard APC Conv. Kit

¥3,400 - ¥3,400
¥3,400
¥3,400 - ¥3,400
¥3,400

The Armored Personnel Carrier (APC) Conversion Kit features a custom front plate and doors designed to replace the corresponding parts of the stand...

View full details
¥3,400 - ¥3,400
¥3,400
¥3,400 - ¥3,400
¥3,400

Phoenician Wing : Standard APC Side Doors

¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

Enhance and personalize your standard marine troop carrier with these unique Armored Personnel Carrier (APC) side doors. Sold unpainted, these are ...

View full details
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

Phoenician Wing : Standard APC Frontplate

¥2,200 - ¥2,900
¥2,200 - ¥2,900
¥2,200 - ¥2,900
¥2,200

Enhance and personalize your standard marine troop carrier with this unique Armored Personnel Carrier (APC) Frontplate. Sold unpainted, this part i...

View full details
¥2,200 - ¥2,900
¥2,200 - ¥2,900
¥2,200 - ¥2,900
¥2,200

Talon Wing: Mark-1 APC Spiked Frontplate

¥2,200 - ¥2,900
¥2,200 - ¥2,900
¥2,200 - ¥2,900
¥2,200

Enhance and personalize your standard marine troop carrier with this unique Armored Personnel Carrier (APC) Frontplate. Sold unpainted, this part i...

View full details
¥2,200 - ¥2,900
¥2,200 - ¥2,900
¥2,200 - ¥2,900
¥2,200

Talon Wing : Standard APC Side Doors

¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

Enhance and personalize your standard marine troop carrier with these unique Armored Personnel Carrier (APC) side doors. Sold unpainted, these are ...

View full details
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200 - ¥3,500
¥2,200

Talon Wing : Standard APC Frontplate

¥2,200 - ¥2,900
¥2,200 - ¥2,900
¥2,200 - ¥2,900
¥2,200

Enhance and personalize your standard marine troop carrier with this unique Armored Personnel Carrier (APC) Frontplate. Sold unpainted, this part i...

View full details
¥2,200 - ¥2,900
¥2,200 - ¥2,900
¥2,200 - ¥2,900
¥2,200
Voidscale: Top-Hatch Component 3d printed
Voidscale: Top-Hatch Component 3d printed

Voidscale: Top-Hatch Component

¥2,200 - ¥3,600
¥2,200 - ¥3,600
¥2,200 - ¥3,600
¥2,200

This top-hatch component is designed to fit onto a Rhino chassis (both 40k and 30k scale) or to be used with our Rhinoback crew compartment convers...

View full details
¥2,200 - ¥3,600
¥2,200 - ¥3,600
¥2,200 - ¥3,600
¥2,200

Epic-Scale : Mk3D Armored Personnel Carrier

¥3,100 - ¥6,000
¥3,100 - ¥6,000
¥3,100 - ¥6,000
¥3,100

These vehicles are compatible with any 6-8mm Scale games such as Epic 40k or Legions Imperialis. This vehicle is roughly: 30mm Long x 20mm Wide x 1...

View full details
¥3,100 - ¥6,000
¥3,100 - ¥6,000
¥3,100 - ¥6,000
¥3,100

Epic-Scale : Mk3 Armored Personnel Carrier

¥2,900 - ¥5,800
¥2,900 - ¥5,800
¥2,900 - ¥5,800
¥2,900

These vehicles are compatible with any 6-8mm Scale games such as Epic 40k or Legions Imperialis. This vehicle is roughly: 30mm Long x 20mm Wide x 1...

View full details
¥2,900 - ¥5,800
¥2,900 - ¥5,800
¥2,900 - ¥5,800
¥2,900

Epic-Scale : Mk2 Armored Personnel Carrier

¥2,900 - ¥5,800
¥2,900 - ¥5,800
¥2,900 - ¥5,800
¥2,900

These vehicles are compatible with any 6-8mm Scale games such as Epic 40k or Legions Imperialis. This vehicle is roughly: 30mm Long x 20mm Wide x 1...

View full details
¥2,900 - ¥5,800
¥2,900 - ¥5,800
¥2,900 - ¥5,800
¥2,900
Heavy Slugger - R2 Hatch Turrets 3d printed
Heavy Slugger - R2 Hatch Turrets 3d printed

Heavy Slugger - R2 Hatch Turrets

¥2,200 - ¥9,200
¥2,200 - ¥9,200
¥2,200 - ¥9,200
¥2,200

NOTE: The SIZE Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue = 1 Hatch TurretMedium sprue = 2 Hatch TurretsLarge spr...

View full details
¥2,200 - ¥9,200
¥2,200 - ¥9,200
¥2,200 - ¥9,200
¥2,200

Featured collection

60x Maltese Cross : Shoulder Insignia pack 3d printed
60x Maltese Cross : Shoulder Insignia pack 3d printed

60x Maltese Cross : Shoulder Insignia pack

¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200
4x10 Squad Making MultiPack 3d printed
4x10 Squad Making MultiPack 3d printed

4x10 Squad Making MultiPack

¥3,900 - ¥4,200
¥3,900 - ¥4,200
¥3,900 - ¥4,200
¥3,900

This pack contains 10 Tactical, 10 Assault, 10 Devestator, and 10 Comand marks, designed to fit on shoulder-like or rounded area of your favorite m...

View full details
¥3,900 - ¥4,200
¥3,900 - ¥4,200
¥3,900 - ¥4,200
¥3,900
Xenos Hunters: Redemptor Honor Kit 3d printed

Xenos Hunters: Redemptor Honor Kit

¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400

These bits are designed to fit the Primaris Redemptor dreadnought model. They're meant to give your standard kit a unique look and provide raised e...

View full details
¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400 - ¥3,900
¥2,400
Prime Marine - Adjustable Arms (PM) 3d printed
Prime Marine - Adjustable Arms (PM) 3d printed

Prime Marine - Adjustable Arms (PM)

¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms)Medium sprue = 10 Sets (20 tot...

View full details
¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800 - ¥4,200
¥2,800
Deathwatch Set 1 : Shoulder Insignia pack 3d printed

Deathwatch Set 1 : Shoulder Insignia pack

¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200
60x Kings Fist - Shoulder Insignia pack 3d printed
60x Kings Fist - Shoulder Insignia pack 3d printed

60x Kings Fist - Shoulder Insignia pack

¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200

Antonis : Arch Battleknight Conversion Kit

¥6,000 - ¥11,500
¥6,000 - ¥11,500
¥6,000 - ¥11,500
¥6,000

This conversion kit is designed to fit a standard GW Nemesis Dreadknight model kit. It is not a full model, just parts to add to your model kit to ...

View full details
¥6,000 - ¥11,500
¥6,000 - ¥11,500
¥6,000 - ¥11,500
¥6,000
10x Base - Crested G:10 Prime Helmets 3d printed
10x Base - Crested G:10 Prime Helmets 3d printed

10x Base - Crested G:11 Prime Helmets

¥3,000 - ¥3,000
¥3,000
¥3,000 - ¥3,000
¥3,000

The G:11 Prime Helmets were designed by the free-blade artist, Cornivius. It was inspired by the new Primaries models with a subtle ancient greek h...

View full details
¥3,000 - ¥3,000
¥3,000
¥3,000 - ¥3,000
¥3,000
60x Ultra Legion - Shoulder Insignia pack 3d printed
60x Ultra Legion - Shoulder Insignia pack 3d printed

60x Ultra Legion - Shoulder Insignia pack

¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200

This insignia pack is designed to fit on any shoulder pad or rounded area of your favorite model kits, including many pre-assembled, snap-fit, or m...

View full details
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200
Gen:3 Iron - Adjustable Arms 3d printed
Gen:3 Iron - Adjustable Arms 3d printed Small = 5 Sets / Medium = 10 Sets

Gen:3 Iron - Adjustable Arms

¥2,800 - ¥4,300
¥2,800 - ¥4,300
¥2,800 - ¥4,300
¥2,800

NOTE: The Size Selection Equates to Quantity per Sprue, NOT the Products’ Scale.Small sprue =  5 Sets (10 total arms) Medium sprue = 10 Sets (20 to...

View full details
¥2,800 - ¥4,300
¥2,800 - ¥4,300
¥2,800 - ¥4,300
¥2,800
Deathwatch Set 2 : Shoulder Insignia pack 3d printed
Deathwatch Set 2 : Shoulder Insignia pack 3d printed

Deathwatch Set 2 : Shoulder Insignia pack

¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200

This insignia pack is designed to fit on any shoulder or rounded area of your favorite models. (YES, they fit the new marines) They are meant to pe...

View full details
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200 - ¥4,600
¥4,200
View all Collection
View all Collection
Shop collection